Is there any way to specify which monitor the console is displayed on in Linux?
Details: I have a 3 monitor setup with 2 video cards. When I boot the computer, the BIOS displays on the PCI graphics card (which has a small monitor). When starting Linux, the console is displayed on the same monitor. Is there a way to have the console output on a different monitor? I'm using the vesafb framebuffer.
I don't see a way in my BIOS to change the default video card.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
How to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup.
The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen). But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor?
How do I change the screen blanking behavior on Linux virtual terminals?
For example, if I switch to a VT from X, login, and leave the system alone for 5 minutes or so, the screen will blank like a screensaver. It comes back with any keypress, like a screensaver.
Mostly I just want to change the timeout, but I'm also interested in other settings.
If it helps, one of my systems is running Ubuntu 10.04 with the stock graphics drivers. fbset shows the console using the radeondrmfb framebuffer device.
I'm using Redhat 5 with a video card nvdia fx 1500 and a zalman zm-m220 monitor
Has anyone configured a 3D monitor with redhat?
I'm trying to set the resolution to 1680x1020. I edit /etc/X11/xorg.conf and try to manually enter the resolution but after a reboot it goes back to the default.
which is the file i need to edit to manually enter the resolution.
I don't know what is up with our servers, but each time I upgrade Linux or switch back to Windows it seems that the default providers have changed,and as such I'm having trouble finding out how to change the default run level from 5 to 3 in Ubuntu 10.4. I had tried the /fstab file, and although the last time I made this configuration was under Suse, I'm not even sure that's how I did it for OpenSuse. I did find how to pass the text argument to the kernel but I don't want to disable GDM so that I have to renable it everytime I login. I'm unsure of how this will affect the startx command, at which point I'll be stuck sifting through books for random commands that might perform the task I would like.To elaborate, the reason I'd like to switch my default run-time level is so that I can configure an nvidia proprietary driver, which requires that the x server not be running and I could switch tty's but that doesn't shutdown the x server and although someone had given me a key combination to the effect of ctrl-alt-backspace,backspace I was advised against using it as it might cause damage to the integrity of the data used to load gdm.
I'm running Redhat 5 Enterprise (Nautilus 2.16.2) with Gnome and am having trouble changing the default application for PDFs. No matter what I do, it seems to always come up as evince.
First I tried browsing to a PDF file using Nautilus, right clicking on a PDF file, selecting properties, open with, and then changing the radio button. However, the radio button is selecting "Document Viewer" and clicking on the other buttons doesn't do anything. The button is stuck on "Document Viewer" (I'd like to use Adobe Acrobat).
I thought I'd do it manually then. Running `gnomevfs-info file.pdf" shows code...
So now xdg-mime and gnomevfs-info are showing different default applications for this file type. I've tried updating the mime database using update-mime-database ~/.local/share/mime as well as updating my desktop database using update-desktop-database ~/.local/share but nothing seems to be working.
Changing a default application really shouldn't be this difficult. What should I try next to change my default application?
, however, shows something different
My .local/share/applications/defaults.list file, however, shows the following:
I am using Puppy Version 430.I want to change the default prompt from # to the current working directory followed by one space. I can do this by opening a console window and entering PS1="w " How do I force this to persist when I restart the computer.
I want to make my system load in GUI to login. I set Login Manager in KDE, and found in google inittab. There maybe I have to change run level from 3 to 4 (X11 with KDE), but I am not sure to change the file. I am afraid to broke my system. Do I have to change run level in inittab to boot in GUI?Other way is to make image of the partition and to try it...
The 14" (pretty sure of the size) LCD monitor is hooked up with "digital input" (not the VGA or whatever). I tend to use the console (i.e. ttyX) more than X windows, and it is extremely slow refreshing. A concrete example is opening a man page, or cat-ing a file go so slow it takes a second or 2 for them to fully display.
Is this a video driver issue? Here are some stats:
I'm a fairly nocturnal creature by nature, but life requires me to spend more time during the bright hours of day. I also have a visual impairment which makes it that my eyes take a very long time to adjust to darker situations. I need to be able to easily dim my screen so that using my computer doesn't keep me awake as much and doesn't prevent me from doing other stuff.
I will accept both a hotkey based solution "like on most laptop" as a timed one. My main monitor lacks simple brightness/contrast controls. f.lux doesn't suit my needs, since it only changes the screen's color temperature. I'd like the solution to work regardless of the make and model of the video card involved. Wearing sunglasses is impractical, since they make it hard to interact with objects around my computer.
I'm newbie linux user and I want to ask a question about my laptop display is too big i think its because of my screen resolution, how can I change my monitor resolution?
How can I change the default text editor for console programs in Ubuntu.When I run mutt and send a message, it currently loads up Joe and I would prefet to load Vim.I know I can change $EDITOR for me only, but would prefe to do it system wide.
How can I change default boot order in Ubuntu 10.04 from Ubuntu to Windows7? However, I already checked sudo gedit /etc/default/grub and modify the grub file to be GRUB_DEFAULT=4 and update the grup sudo update-grub I even install graph software to re order the book sudo startupmanager But still after restart the default choose for boot is Ubuntu ...
P.S: I am using Ubuntu 10.04 with grub version 1.98
I would like to run Windows (XP preferred) games and Linux on my MacBook Pro I got from school. However, there are some rules I have to follow. If I need to I will try to further clarify the rules, since they are in Swedish and there isn't a perfect translation. I cannot use Boot Camp. This is because Windows machines get viruses 24/7 and there are no viruses on Mac. Furthermore, we are using Visual Studio for about half the things we do through a virtual machine. Perfect for debugging, performance and "virtual machines don't get viruses", right? At least that's what my teachers think. I cannot change the default setup of the computer. In Swedish this basically tells me I cannot even start it up because then I will mount the drive, and make changes in RAM, and use the processor, and move electrodes from the battery and so on. They're telling me that that's way to specific, though, and that we aren't allowed to change the operating system files. I think we break that rule with each update, install or setting we ever touch. I may not use any program without first showing a receipt. The original casing, CD and the CD key isn't enough. A license like GNU is ok, though.
I basically need a way to boot into a USB drive or CD, with the ability to use network and DX9 to play games on Windows. Linux support isn't as crucial since OS X does have a lot of Linux support already. I've tried other ways of working around the rules like running games in Wine but I can't get DX9 based games to work and the FPS is terrible. They have the right to check the computer at any time to see if there is something bad there. Swapping a harddrive will definately be noticed.
I have looked almost everywhere for how to change my default shell prompt. When I open my bash shell, the prompt is [fedora-dev@Fedora-Dev Documents]$. I would like it to open at fedora-dev@Fedora-Dev]$.
Can someone tell me where to change this at. I have looked in .bashrc, etc/profile, and environmental variables.
I have a dual booting set up with Ubuntu as default O/S and Windows 7. wish to have Windows 7 as my default O/S. I tried by clicking Alt+F2 and entering 'Sudo gedit/boot/grub/menu.lst' but nothing happens.
I am using an external monitor on a laptop whose default screen is dead. This works fine with Gnome or KDE, but when i do a switch to console (ctrl-alt-fnX) my monitor loses it's signal, and i wind up with a black screen. Alt-fn7 gets me back fine, but i am really missing the console...
Ubuntu 8.04.4
Computer switch monitor key (fn-f does nothing, even tho it works fine when in Gnome.
