General :: How To Properly Start Gvfs Without Gnome
Jan 2, 2011
I have a Debian testing box with Xfce (no Gnome, no Nautilus). It has all gvfs-related stuff installed, including all backends and fuse interface. But any attempts to gvfs-mount anything (like sftp://... or smb://...) fail with error opening file: Operation not supported, and gigolo shows only 'unix device (file)' in the list of supported protocols.My ~/.gvfs has rwx permissions, and I'm a member of fuse group; other fuse-related stuff works for me.
Recently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs Output information may be incomplete. (K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N First sec data area: 43:41:33 (LBA 196608) (402653184
How to get compiz to auto-start. What seems to be the generally accepted method (from what a few google searches and the debian wiki tell me) of using gconf-editor and changing the window manager from 'gnome-wm' to 'compiz' in desktop > gnome > session > required_components doesn't change anything. The only method I found that did not involve using a terminal and running 'compiz --replace' every time I boot the computer was to add compiz and fusion-icon to the gnome startup apps, but this causes unwanted flickering (it starts metacity and then replaces it with compiz, ie it's simply automating what I would do with the terminal). Autostarting the fusion-icon alone does not start compiz, although it allows me to start it from it's menu if I right click the icon. Note that I sometimes use fluxbox as well, so starting it on boot isn't really an option either.
Perhaps this can be useful : compiz: Installed: 0.8.4-4 Candidate: 0.8.4-4 gnome-session: Installed: 2.30.2-3 Candidate: 2.30.2-3
GNOME 3 Failed to Load Unfortunately GNOME 3 failed to start properly and started in the fallback mode.This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience.
.The interface is now Gnome 2. I have not change screen resolution 1280�720, now is 1024x768.
Result of xrandr -q
Quote:
xrandr: Failed to get size of gamma for output default Screen 0: minimum 1024 x 768, current 1024 x 768, maximum 1024 x 768 default connected 1024x768+0+0 0mm x 0mm 1024x768 0.0*
When I use nautilus open my home directory, everything is OK except that the file contents in the home directory are not presented. It seems that nautilus is still waiting and busy.
After that, I try to enter the user's home directory by the Terminal and succeed. I can use 'ls' to display the file in the home directory, But when I use 'ls -a' to print the hiden files, again the Terminal seem to be lock. the 'ls -a' is locked, I fail to 'kill' it.
At last, I find that everything that connects to the behavior which need to enter, delete or just dsplay the /home/$USER/.gvfs will fail and lock, and without any error message.
1.crash & warning showed as soon as dekstop was prepare ( note that i had not even installed f14...i was about too but this error drive me crazy and make me confuse ? )alright i got that , here is all u need ...gnome disk utility 2.32.0-1fc14reson process/usr/libexec/gdu-notification deamon was killed by signal 6(SIGABRT)crash count :11.crash & warning showed as soon as dekstop was preparegvfs crash 1.6.4-2,fc14reason process/usr/libexec/gvfs-gdu-volume monitor was killed by signal 6(sigabrt_crash count :2so now tell wheather i should install f14 frm this cd or make another ?
I'm using Gnome 2.30.2 with Ubuntu 10.4 would like to shut down X Windows properly. Using sudo init 3 from console 1 or a terminal on the Gnome desktop results nothing. There are a bunch of ways of doing accomplishing this that I've seen, but the most recommended methods each cause the same errors. The methods that I've used are sudo service gdm stop, sudo stop gdm && sudo pkill X, and sudo /etc/init.d/gdm stop. After these commands are run I receive the following message: gdm stop/waiting.
Then I switch to console 7 & notice that the screen is frozen & has the following information:
There is a blinking cursor below this message & the terminal does not respond to any command including Ctrl z.
These are the same messages that are normally quickly displayed when linux normally boots.
I disabled the battery power option in & removed other unnecessary startup processes from System, Preferences, Startup Applications. I've tried running the gdm stop commands from terminals 1 & 2 as well as consoles in X Windows & it produces the same results. For some reason though, the gdm commands do work when I used the restart option.
Why do I keep getting .gvfs (gnome virtual file system) file appearing as corrupt in /~/usr directory, I can get rid of it by unmounting, but it re-appears later on. It is causing problems as it interrupts my backups (which are automated) with an error message,ListError .gtk-bookmarks/.gvfs [Errno 13] Permission denied: '/home/jimt/.gvfs'
I loved Gnome's Nautilus and FTP integration and being able to mount a remote FTP directory as a regular bookmark/directory, and double clicking any remote files to open in any unmodified program. I also loved editing text files with GVim.
However, if I double clicked file on Nautilus to open a text file in Gvim, then saving a file will take about 10 seconds and GVim will hang for that amount of time. The major irritant is that I cannot continue editing while the text editor is waiting for the write to finish, this delay interrupted my workflow and thought process and saving becomes a painful process. The other problem is that I don't think simply uploading a file should take that much time.
I'm aware of GVim's internal FTP support, but they are not as well integrated with Nautilus's FTP and it suffers from the same problem.
So a few question:
Is there a way to make GVim or GVFS to save in background while I continue editing? Why is GVFS so slow? Is there any way to set GVFS to use a single persistent FTP connection instead of creating a new FTP connection each time?
I've set up home server, which doesn't have to be as powerful as other servers, so I decided to install GUI because of applications that are alternatives to classical GUI applications in headless version requires more skill/knowledge. However, I don't want server to run GUI always at start (which gnome-desktop package does). I need some configuration in KDE/gnome/xfce (haven't decided) that doesn't start GUI after each start (e.g is required to type startx or equivalent command to start GUI)(off topic: can you also recommend good remote-administration with GUI transport ?)
I looked around for threads addressing this issue and some have come close to answering it, but I have yet to see a definitive yes or no. Anyway - Here's my issue:
Background: I can SSH into my home computer (Ubuntu 9.04 running Gnome) from work (Win XP Pro) using RealVNC via Putty tunnels. This has been working flawlessly for me for awhile now. I was messing around in the terminal window and accidentally rebooted the linux box (home computer) while I was at work. No big deal I thought. So I re-start the Putty connection, and it is back up in no time. Then I try to start the VNC connection, and no go, connection refused. I remember seeing that in order for the VNC connection to work, I had to be logged into the Gnome desktop already on the Ubuntu box.
Question: Is it possible to log in and start up a Gnome desktop session from the terminal command line in Putty so I can get the VNC connection back?
I just installed GroupWise 8.0.2 and I want to use it as a pop (and if possible) exchange client. It's been a while but I remember that if you don't want to use a GroupWise server you just needed to select 'Caching Mailbox Path' and give it an existing path. If I do that now it just keeps asking for the hostname of the GroupWise server.
This seems to be a problem that haunts me whatever version or variant of Ubuntu i have installed... When i start empathy the first time, everything seems fine. But every-time i reboot, i have to do: sudo apt-get purge empathy && sudo apt-get install empathy or i'm not able to use it, cause it wont login...
I have a real newbie question. I want to edit my disk partition table. Mount some drives etc. I like gui tools and gnome's disk utility seems to be able to do everything I want to. My problem: When I want to create a new filesystem on an empty space, I'm not allowed to. I guess I need root access, but I can't login as root to my gnome session and I know no way to start the disk utility from a terminal where I'm the root user, so my question is: How do I do this?
I just upgraded my laptop from fedora 10 to 12, in spite of all kinds of hassles I am nearly able to use the system. Except I noticed that whenever I connect to the ethernet via NetworkManager, both of firefox(3.5.6) and thunderbird(3.0) won't start a window and there is no error output. The programs just hang there so that I have to kill them explicitly. The strange thing is that if I just disconnect the network then they can start up without problem. I can then reconnect to the network and both of them work fine.
I accidentally deleted my bin just after booting up when the bin application failed to start properly. I can still send items to trash (right clicking and select from drop down menu) but I cannot restore them, see the bin icon or drag items to the bin area. It is quite annoying and I would be very grateful for comprehensive instructions on how to restore the bin to full operational functionality.
Just did a clean 11.04 install, however, Ubuntu doesn't start properly, it usually stops when it gets to the purple screen, the screen with the word Ubuntu and a few red dots underneath it to show it is loading. The system usually stops there or stops before getting to that screen. I was able to start in the 'safe mode' though.
Yesterday, I tried to get two monitors working by editing xorg.conf. When it failed, I tried using my old xorg.conf, but that didn't work either. dpkg-reconfigure xserver-xorg did not work (it literally did nothing). Uninstalling and re-installing xserver-xorg did not work.So now I have zero working monitors instead of two. Xorg.0.log says something about "Screen was found, but doesn't work with existing setup." Anyway, I am less concern with the specific problem I am having than with the general way to fix problems with X. I read somewhere that dpkg-reconfigure xserver-xorg doesn't work anymore, but I haven't figured out what I'm supposed to use in place of it when X won't start.
For some reason my gnome-terminal is starting in / when it should be ~ I have checked /etc/profile, ~/.bashrc and /etc/passwd and everything seems fine as far as i can tell Konsole and xterm are starting up with the working dir to my home dir (as set by /etc/passwd) But im at a loss to see where gnome-terminal is starting in / if i enter cd with no argumants in gnome-terminal it is switching to ~ fine, so i dont think its mistaking my home dir for /
How would I do this? First part of the thread title is because I'm not sure if the install of Debian Squeeze would even detect the Start key. (Btw, is there a small enough sticker of the GNOME logo I could buy and put over the Windows logo? )
I read this thread: [URL] but I'm confused about what linmix is saying. Is there a way to get the power key to do the equivalent of what it would in Windows?
I don't find this an essential task, but it would make life a lot easier.
I have updated my ubuntu to the following kernel: 2.6.31-20. There has been several other update such as compiz that I do not have installed.Anyway, now I gnome doesn't work properly - at least I think it is Gnome, I cannot switch between windows, I do not have the bar on top with the cross and all I only have one desktop loaded out of 4 and the computer is continuously working.
I am having an issue with the notification Area, Indicator Applet, and Indicator Applet Session and the way they appear in the top gnome panel. The icons are scrambled at log in and I have to delete them and replace them to get things looking right. I didn't have this issue in Karmic; it has only occurred since upgrade to lucid. I have reset my gnome config files and the problem still occurs.
As a side note, the issue only seems to occur when the icons in the notification area or session indicator are abnormal. ie, sound is muted, lap top is unplugged, and so forth.
I have a 400mHz clear blue iMac here that I recieved from a friend. It was being used by an art center to display one letter as part of a sign. For some stupid reason, they put Debian on there for that. Whatever.I wanted to put some type of linux on it (not sure yet what kind) but since the Ubuntu Forums are awesome, I figured I'd use this resource instead of signing up for something new.
When I plug in the iMac and press the power button, it lights up with a green LED. Next, I hear the CRT screen power up. (with that nice satisfying crackle) followed by a loud, "Boop!" I do not see the screen light up, nor does it react to a keyboard, mouse, or monitor hooked up with the VGA on the back. It takes CDs in (which I found out) but does not give them back. (so rude.)
I have a problem with BT again, I installed blueman from SlackBuild at [URL], but when I start it (from Setting > Bluetooth Manager), it was running with a minimized window at the taskbar for a while and not appear any window or icon on the system tray.
I track its process, there's still it running background Code: tridc@latix:~$ ps aux | grep blueman tridc 5394 0.0 0.4 26052 15708 ? S 15:54 0:00 /usr/bin/python /usr/bin/blueman-manager tridc 16171 0.0 0.0 2204 628 pts/0 R+ 16:41 0:00 grep blueman
I am new to this forum, so apologies if this question has been asked before or is placed in the wrong section. Hey there, I am running Fedora 14 on a 64-bit system (laptop). Upon logging in, (it doesn't seem to make a difference if it is an initial log-in or returning from logging out), the top and bottom GNOME panels occasionally 'miss' loading a few things, or loads them improperly. As an example, the Notification Area may be missing, and I will have to re-add it manually to the blank spot where it should have loaded. I have also had issues with the Workspace Switcher loading improperly and the System Monitor not loading at all.To note, this does not happen every time, but it occurs often enough to become an inconvenience. More often than not I will have to log out and back in again to fix an improperly loaded section of the panel(s).
I had many trouble with my system the past two months. I thought i finally had it running flawless as i encountered another major issue: My Screen doesn't refresh properly (using GNOME). I have blank windows or windows showing old content which only gets updated when i minimize the window or move the mouse over them. And even then only small parts get really refreshed. Every Applicatio
One day, I was altering the size of the icons to make them smaller. I first made them larger (to 150%), and then shrunk them down to 66%. I did this through Nautilus while being in the /var/www folder. The Desktop icons resized down to the 66%, as well as all other icons. However, the icons in the /var/www folder remained large (at the 150%). I've tried changing it, and no change occurs in the particular folder.