OpenSUSE :: CPU That Runs Always Very High?
Jan 25, 2010
I have a couple of problems (opensuse11.1):
1: CPU that runs always very high.
In the system monitor I have a number of unknown processes from user root,-1 that keep popping up (see yellow highlight in image1). What are they?
As you may see zombie processes are also coming and going... among which dns-resolver, ifup, ifdown, ifdown-route, netconfig, nis, ntp-config, udved, grep,
touch.... Is that normal??
The system load view in the monitor indicates 2 CPUs with different loads (see image2) when I have only one intelP4. What is this?
At the same time the output of command top seems more regular, except for the high cpu load, although I wouldn't be able to say what every processes is meant for.(image3)
Has anyone an explanation? Is it normal that most of these zombie processes seem network related?
2. Virus report from external server
I usually connect to a server via VPN (to access electronic journals) but recently the access has been denied to me because "my connection is infected with the worm Conficker".
I know it is very unlikely that a linux pc catches a virus.. so I am puzzeld... I have a dual boot with Windows (probably infected in some ways) but haven't used it for at least a year..
View 5 Replies
ADVERTISEMENT
Oct 13, 2010
I have a launcher for Quake that essentially runs a shell scripts that runs quakespasm with certain options. Is there a way to add it to AWN?
View 6 Replies
View Related
Apr 26, 2010
I have a laptop with a sis 650 video card. It works just fine except in video games like assault cube where it runs really slow. Now that could be because I have less than a gig of memory, but more likely it seems lack of 3D support. I found the sis_drv.o-402 file on the sis site, which seems to be a kernel module. This info came from an article that is a couple of years old. It, and other references speak of using "insmod sis_drv.o-402". I can not find such a command, nor can I find reference to it in the opensuse site. I also can not seem to find which driver I am currently using, and if it has 3D support.
View 1 Replies
View Related
Apr 20, 2011
In graphic interface, when I use dolphin to view the files in super user mode, this application runs very slowly, and react dull at each request!
View 7 Replies
View Related
Aug 8, 2010
Just after I boot up I get this wierd HDD activity that lasts for some time during which my system runs at snail Pace and or Hangs. After a while the activity stops and things are good and then randomly it all starts again. I have read some forum post on constant HDD activity but they do not seem to apply to my problem. I am Running 11.3 with a quad core AMD 64bit CPU and 4GB of memory.
View 9 Replies
View Related
Dec 5, 2010
I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:
1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use
2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case
3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs
4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel
View 2 Replies
View Related
Dec 14, 2010
I just upgraded KDE on my openSuSE 11.2 installation. I have never had any problems doing this in the past, but this time, when I rebooted, I noticed that after a few seconds of idle time, my CPU usage goes sky high. I ran top in a console and noticed the culprit was xorg. I am using an NVIDIA card on an AMD64 3200+ with 1 gig of memory. KDE version is currently 4.5.85.
Like I said, I didn't have this problem until the last update. Any ideas as to what could be causing this?
View 9 Replies
View Related
Dec 15, 2010
My screen resolution is only 640x480 after I installed the nVidia driver by authority method of 1-click install.
And then I run nvidia-xconfig,/etc/X11/xorg.conf was built.Restart my PC.
I selected the default mode to run opensuse.My screen was black.
So I select the failsafe mode and remove the /etc/X11/xorg.conf.
I try to copy my ubuntu 10.3 /etc/X11/xorg.conf,but I failed,the screen was black when booting default mode.
Now my LCD resolution is so low.
Graphics card:nVidia Geforce 5200
Monitor:19 inch widescreen LCD
And I can keep the best LCD resolution 1440x900@60Hz in the Windows XP successfully.
View 2 Replies
View Related
Mar 25, 2011
I'm using OpenSuse 11.4, and I was wondering if anyone else has noticed consistent high CPU utilization with banshee? By high CPU use I mean, when the application is running (whether it's idle, playing music, or scanning) CPU use on my machine is almost consistently at 100% (one core pegged).
Scanning my music library took hours ... like 3-4 hours to scan 9500 songs, and banshee was the only application running on my machine.
Rhythymbox doesn't suffer the same fate, scanning the same library took 5 minutes and CPU busy is less than 2% when it's running or playing music.
I'm running banshee 1.9.3, and I'd rather use it vs Rhythmbox.
View 9 Replies
View Related
Feb 9, 2011
im planning to migrate from windows to OpenSUSE. One thing i cant leave from windows is, its support for high end games. I did some research, we can use Wine application in Linux. Im wondering, if i install a game (for example) FIFA 11, will it run smoothly like i run it on Windows 7? Does it depend on our hardware (graphic card, processor, memory)?
View 6 Replies
View Related
Jul 14, 2010
cpu temp in Suse 11.2 is over than 55 C (sysem don not have any task) , but in windows 7 temp is 42 C
in fedora is 46 C I have new fresh install of suse 11.2 my cpu is : AMD Phenom(tm) II X2 550 Processor
what my system working warm ?
View 5 Replies
View Related
Apr 5, 2011
as the title says my CPU goes on C0 state (100%) on every scroll and then returns down after a couple of seconds.
Is it normal?
I've checked this with powertop (and with my ears because I hear the fan noise...)
View 9 Replies
View Related
Mar 18, 2011
However, I would like to ask if anyone else is experiencing Higher than normal CPU usage with openSuSE 11.4 PR?? My system, which is probably similar to others, increases the air flow with the fan on the CPU when it is working hard. Mine gets rather noisy. (don't have it on the floor, but right next to me) This fan speed increase has been lots more prevalent in the newest version of openSuSE.
Have also used 'top' and it looks like xorg is one of the biggest hogs. However, when I use VMware it goes into hyper drive a lot.
View 9 Replies
View Related
Jun 16, 2010
I use divxenc 1.4.6 to create AVI files. Works great. Recently, I started using the option to subsequently convert that to MKV, so I can include multiple subtitles inside the file. Unfortuately, the subtitles show up much to high in the picture. In the AVI format, the subs are just above the bottom of the image. But in the MKV here they appear at about 1/3 up from the bottom. This behaviour shows in both Mplayer for Linux and VLC for Windows. So I guess it's in the file. Is there an updated version of divxenc, or another tool to generate MKV's directly ?
View 2 Replies
View Related
Jan 9, 2011
I just posted about this in this thread, but as the other thread was started by a KDE user then I thought I'd post here as well. I've had high CPU usage for a few months now - probably since trying the 0.9 branch of Compiz then dropping back to the default openSUSE builds (XOrg and gconfd-2 running a Core i5 at about 30% on every core*). I've now finally found a solution after deciding I wanted to fix it once and for all.
Once again, the Ubuntu forums come to the rescue with this thread (I don't like the distro as a whole, but I do find the forums useful!). I'm using Compiz, but it turns out that Metacity was running as well. A quick "killall -9 metacity" and the gconfd-2 process has vanished and XOrg settled down to its normal 1-2% (which is reasonable when I've got a Conky config refreshing every fraction of a second to repaint a sound visualiser!). Now I just need to find out why Metacity starts when I'm using Compiz...
* according to Conky's per-core graphs, although top only reported 15% overall and the Conky "top 3 procs by CPU" reported a measly 3% for each process, so someone's maths was out somewhere!
View 3 Replies
View Related
Sep 13, 2011
I have a problem with my screen resolution in Linux. This happens with both openSUSE 11.4 and Fedora 15. The moment my PC restarts after I have installed the operating system it will boot up with a screen resolution higher than my monitor supports. My screen supports a maximum resolution of 1600 x 1200 @ 75Hz and Linux sets the default resolution way too high at boot, now all I get is a message from my screen asking me very nicely to change the signal timings, but I can't because I can't see anything to change it to a lower value (I don't want it so high anyways because then everything is too **** small). My monitor is a SONY GDM-5410 and the Graphics card is an AMD Radeon HD 4870 1GB. It nly works when I boot the system to FailSafe mode, but then I can't cahnge it permanently.
View 1 Replies
View Related
Nov 30, 2008
I can be granted permission, and I'm in the proper groups, but pulseaudio tells me I can't get permission.. I wanted to see if anybody else had this problem / knew of a solution / isolate whether it is a pulseaudio, policykit, whatever problem, before I post a bug upstream.
Code:
[Sun 07:25 AM] ~ $ rpm -qi pulseaudio | awk '/Version|Release/ {print $1$2$3}'
Version:0.9.13
Release:3.4
[Sun 07:25 AM] ~ $ groups
[Code].....
View 8 Replies
View Related
Apr 15, 2011
Few days back I changed the video playing speed to faster,since that day,SMplayer keep playing video at high speed even I've change the speed to normal...
View 4 Replies
View Related
Jan 7, 2010
So I just reinstalled OpenSUSE 11.2 and I went from having 20-30 mbps speed to and from my 1 tb usb ntfs external hard drive to having about 1 mbps transfer speeds now. Is there any suggestions for how I can fix this? I know it can go faster, I just need to figure out how. and would setting acpi=off at boot affect this?
Opensuse 11.2
KDE 4.3
64 bit
EXT4 main disk
NTFS external
fdisk -l code...
View 9 Replies
View Related
Dec 31, 2009
I am writing some server programs. I notice that I can only connect to the server with a total of 28232 connections (clients) before I get the errno [99] "Cannot assign requested address" from the client program. I am using the same machine to do both operations. It seems like I am reaching some networking limitation outside of both programs.The server process has a maximum of 6 theads running(well below the thead limit). The client has two threads. When I add another client machine to the testing I can surpass 28232 connections). What limitation am I reaching on the server machine and how can I overcome this limitation. Again when I add a client machine to the testing, I can achieve more than 28232.
System Setup:
SUSE 11.1 64 bits
ulimit nofile=150000
View 7 Replies
View Related
Jan 28, 2010
I am looking for a daemon that will set the CPU to lower frequency if its temperature is going too high. I used an application like this in Windows.
View 3 Replies
View Related
May 3, 2010
My .jar file needs and uses some files in the same directory it's in (everything, including the jar was unzipped into said directory). It runs perfectly when I do java -jar file.jar in the command line, but there's trouble when I double-click the file when running from the file system manager. I've tried a custom command under properties ie java -jar, but the problem is that the .jar file doesn't seem to be able to use any of the files in the same directory. When running, the jar can't find any of the files that it needs.
View 5 Replies
View Related
Jul 13, 2010
I use a SLES-machine (should be similar to opensuse I guess) and ad AIX-machine and got the following error:
Every time a none-root user runs an "at"-command on the linux machine, there is an error written into the errorreport of the AIX-machine. the error is the following: <82>Jul 12 22:32:09 linux-hostname atd[10754]: PAM audit_log_user_message() failed: Operation not permitted
I already checked the files /etc/at.deny (exists with users listed like "alias, backup, bin, ..." but not the user that causes the error-message) and /etc/at.allow (which does not exist but is not necessary, as far as I could read from the internet).
View 3 Replies
View Related
Mar 30, 2011
I am seeing new entries in my boot.msg now that I am running 11.4. This is a sample:
Code:
<4>[ 4.251486] CE: hpet5 increased min_delta_ns to 7500 nsec
<4>[ 4.251493] CE: hpet5 increased min_delta_ns to 11250 nsec
[code]...
View 1 Replies
View Related
Jul 19, 2011
I am running 10.10 on a netbook (1.6Ghz Atom N270, 2GB RAM). Because it has limited resources, I am currently testing to see which apps I want to use.
Which should take more priority -- an application that uses less RAM or an application that uses less CPU?
View 2 Replies
View Related
May 27, 2011
I installed Fedora 15 yesterday. Took a few hours to get used to the Gnome 3 interface, and I love it.I noticed that my fan seems to be running all the time irrespective of system load, even when it's idle.An internet search yielded this supposedly resolved issue where the fan ran constantly on systems with Intel integrated graphicsLike that link states, I am running the latest updatedl kernel-2.6.38.6-27.fc15, but the fan running continuously issue still persists.
View 1 Replies
View Related
Jun 4, 2010
if anybody runs linux in vm fusion.
View 1 Replies
View Related
Jul 16, 2010
I installed Ubuntu Hardy Heron about six months ago, and it has gradually slowed down, and CPU utilization has crept up to the 50-60% range. The DEV folder contains a large number of similar files - TTY0 through TTYZF or PTYA0 through PTYZF. I suspect that something is not configured right, but, I don't know where to look.
I connect to the internet through a G4 Wireless Transceiver connected to my ethernet port on an IBM Think Center 8187.
View 6 Replies
View Related
Jul 24, 2011
The problem is I need the php program to send member email confirmation which contains a confirm link. Run every min may still make the member wait. So I like to make it to run every 20 or 30 secs.
I don't want to put the code to send email on my sign up page as that's no good.
But I don't want to put a sleep 30 sec on my php script and going on loop. If it failed in the middle then it may wait abit to start.
What can be done to achieve my goal and what's the best way?
Making a php script to run as a daemon process? Is that possible and okay?
View 9 Replies
View Related
Nov 28, 2009
I had F11 i586 installed on my X86_64 machine. I used preupgrade to move up to F12. (I had the space problems noted elsewhere, but eventually got all of the F12 packages installed.) Grub now has the following titles:
Fedora (2.6.31.5-127.fc12.i686)
Upgrade to Fedora 12 (Constantine)
Fedora (2.6.30.9-96.fc11.i586)
If I boot to F12, it boots up to a point where I get garbage graphics and the system freezes. If I boot to F11, SELinux relabels and the system then boots normally. I'd like to boot normally into F12.
View 6 Replies
View Related
