OpenSUSE :: Apps To Bounce Emails Back To Selected Senders?
Dec 10, 2010
there are any apps in Linux that allow messages to bounce back to the sender with a fake message saying the user does not exist or the email could not be delivered.
I have a stalker that keeps sending me disgusting emails on my primary gmail address, which I also use for work. He got my contact from a friend of mine (she was unaware he is mental i guess). Needless to say I replied a few times demanding he'd stop his cr@p, first in a polite way then even with insults and threatening to go to the police (but he is in another country so that's not a strategy I can use. Additionally in the country he lives - which is my native country - by law there is no restrain order unless there is first a personal attack and plus even in that case you have to get lawyers and pay lots of money for a court order).
Anyway, of course I already set up a filter in my gmail address that sends his cr@p right to the trash, and blocked him from any contact I have on the internet (Skype and Facebook). But I would like to pretend that my address does not exist any more or is not accepting emails any more by bouncing back a failure message so that this idi0t can stop once and for all. This disgusting email flood has been going on for almost a year.
I googled and found 3 windows apps that do that ( Bounce Email Spam Messages Back to Spammers with Non-Delivery Notifications | Raymond.CC Blog ) but I have not been able to find anything for Linux.
Does anyone know of any way to have a failure email bouncing back?
Does anyone know what might be causing the following situation?
Crontab emails are bouncing with the message "Message rejected as spam by Content Filtering." (I've contacted the mail server admin about this.)
But emails sent with the command "mail user@example.com" etc. are "stat=Sent ... Queued mail for delivery" (according to the log), but never arrive and never bounce. I've tried sending as root and as other users.
I apologize if something like this is answered in another thread, but im so new im not even quite sure what to look for in the form of an answer.Background on the problem is I am teaching myself how to correct problems users might cause. In this case moving their .evolution folder. The end result is I want to get emails, contacts, and signatures back. Ive got the contacts and sigs back but email still eludes me. How can I get old emails back in the evolution inbox?
First thing I will say is I am new this site and computers in general. I have pc and am running back track 4. Today the computer shut off, maybe an over heat. I restarted it and it turned off again even before the reboot finished. I put an additional cooling fan in front of the air intake and the computer is staying on but now will not open the emails in the my hot mail account. It seems to open the account, I can see what is in my in box just can not open them. Moving the curser over the unopened email usually made what is in task bar at the bottom of the page change. As of now it continues to say "Done" in stead of showing a task. Moving the curser over other things on the same page will make the task bar say "javascript" only.
I upgraded from Karmic to Lucid (Ubuntu 10.04) a few days ago (without backing up any data first). At first everything seemed fine but yesterday three things happened:
1. All my emails and address book have disappeared in Thunderbird. When I started Thunderbird, it took me through the wizard and seems to have overwritten my profile with a new one. There is only one profile in the Thunderbird folder and it seems to contain no emails and only a new, blank address book (the small size of the folder backs this up. I searched the hard drive but found no other emails or address book files.
2. My bookmarks have disappeared from Google Chrome. Again, it seems to have created a new, blank bookmark file. The bookmark.bak file is similarly blank and when I search I can find no other bookmark files.
3. The Pictures folder (in the home folder) is now empty; suggesting that ubuntu has either overwritten the Pictures folder with a new blank folder or deleted all the files in it. Again, when I search the hard drive for jpg files, it doesn't find any of the pictures that were in the Pictures folder.
I have a multi-user machine with several network interfaces (Ethernet, if that matters). I wish to grant selected users, or groups, full access to selected network interfaces (including ability to adjust IP address and to bind to low ports, but *only* on those interfaces). It is important to me that an user/group does not such full control over other interfaces. Granting partial, or temporary, root permissions is OK; it's a friendly environment.How do I go about it?System: Linux 2.6.recent; usual Debian setup (can be adjusted if needed).
For like windows you can resore your os to a state of peace kind of. If you messed up your vital files you could go back in time and restore you computer to a selected time. I was wondering if you could do that for ubuntu
I want allow a local domain (domain.com) to send email ONLY locally, and I don't allow domain.com to send email to remote email (externally) . How to configure exim to do this ?
i have noticed that if vista is not the active partition, hybernate does not work. it just goes black and then back to the user icon screen to log back in. another "slight" problem was that i was not able to apply a service pack. after restoring vistas dominance i was able to install the pack. is there any other work arounds for hybernate? even though you might not be interested in cleaning up after microsoft.
I installed Mac OS X 10.6, Windows 7 Ultimate, and made 4 partitions.OSX and 7 installed fine, but when I tried to install SUSE, it stopped at 92%.I get this error:
I would like to add the option mem=4096M to make some software works. but as long as I try with more than 512M, I have the error: error 28 selected item cannot fit into memory.
I have recently installed 11.2 on my laptop and am having problems with installing flashplayer. What happens is I go to install software, select flashplayer to be installed, click apply and the stupid things starts downloading all the upgradable programs. I have not selected any of these to be upgraded as I only have 600mb of downloading left to last me 10 days and won't waste it on upgrading. Is there a reason for the package manager installing programs that aren't selected?? Is there a way to use Install Software without this happening??
I recently installed SuSE 11.1 (64 bit) on my system
AMD Phenom II 940 3.0 Ghz;Biostar TA790GX 128M Motherboard with ATI Radeon HD 3300 Graphics card built in; 4 Gb (2*2 sticks) DDR2 800 MHz RAM
The installation went smoothly, But on first restart and login (and subsequent ones too!) I get a light purple screen with a skyblue box at top left corner, with xconsole written on it. when I Left click anywhere on the screen, I get a popdown with a number of options, of which only XTerm (bash shell) and exit (logout) options work. Now I know the HD 3300 graphics card drivers are not built into the SuSE 11.1 distribution, and I have already downloaded them (Linux ones)from ATI website. I login as Superuser, and type init 3 to go to a very basic screen,login as user, change to superuser again and then run the following file i downloaded from ATI:
sh ati-driver-installer-9-4-x86.x86_64.run
The result/output at the command prompt:
Created directory fglrx-install.ubanI5 Verifying archive Integrity... All good. Uncompressing ATI proprietary linux driver-8.602... .....(lot of dots)... ati-driver-installer-9-4-x86.x86_64.run: line 295: ./ati-installer.sh: Permission denied Removing temporary directory: fglrx_install.ubanI5
Once again, i tried everything in superuser login.
Also I tried making changes via sax2 command, it doesnt seem to work. A window opens where I see that my graphics card has been detected but thats about it. nothing else in that option, everything is greyed out (nothing to be selected)
I have downloaded a film from a commercial TV station for my own use and want to edit out all the advertising breaks. I have tried Cinelerra but I cannot find a means of deleting selected frames, I also looked at trying to use Kdenlive but cannot find a way of loading the complete film to work on so unable to tell whether it might be useful.
I installed openSUSE on one of the spare computers in work to test it out before I install it on my own laptop. I tried connecting Kmail to MS exchange and did so successfully using POP 3 but never checked the box saying leave messages on the server and it removed the emails from the server. Now I have nothing in my Outlook Inbox on my XP machine. how I can restore the emails from Kmail to the server.
Imagine my surprise when, after accepting the proposed upgrades posted for OS 11.1 today, that my SeaMonkey email client shows NO messages from Sept. 2010 in any account, sent or received.
More info: Upon checking for messages, an unusually large number were seem to download (POP server) but few appeared in the in boxes. Old messages from August appeared for the first time.
I recently installed opensuse 11.4 on a remote server. It has GNOME installed as a desktop. The problem I am experiencing is that when logged in through VNC, most of the GUI apps are not functioning, especially ones that require root privs. Example: The Add/Create users context does not function. After you supply root pw, nothing happens. If you launch it from a terminal, you see this:
jjmuw@g01:~> xdg-su -c /sbin/yast2 users Xlib: extension "RANDR" missing on display "::1:1.0". No protocol specified No protocol specified
[code]....
(y2base:4872): Gtk-WARNING **: cannot open display: ::1:1.0
Followed by a hang. This is also affecting things like the Xen configuration contexts (creating/managing VMs).
Some minimized apps no longer appear in the top menu and by that are no longer accessible.For example firefox with the minimize addon or Jungel Disk backup service.How can I reach apps that minimized them self and are not shown in the top menu?
I broke my apache server. I went into the Yast administrator / HTTP Server and enabled the "rewrite" module. The server stopped working so I went back in and disabled it. Now the server still doesn't work and when I try browsing to any of the sites on it all I see is a page that says "No database selected" for any sites using databases. For static sites I get a 404 error. I broke rule #1 and didn't have back-up configuration files so now I'm stuck. What could the Yast module have done to my configuration files? I have restarted apache several times and even re-booted the computer.
I installed openSUSE 11.4_amd64 on my system. All works fine but a lot of popular apps are missing from the repos. OpenSuse11.3 had them but 11.4 doesn't!I searched for apps like skype,isomaster,acetoneiso,openbravo erp,gsmartmon,smooth-task etc but didn't get any result. I have contrib and pacman repos enabled, still no luck...all the above mentioned apps were available in 11.3 then why not in 11.4..is it 'coz it released recently?
I have a server with a domain running and im trying to resolve the mail server but i can't see where to start. I use OpenSuse 11.2. Basically, for starting, i want postfix to send incoming emails to a php script or perl. for outgoing emails i guess that i could use php mail function and i will see what else to have. I configured the dns. I do a dig.mydomain.tld MX and i get the following:
Immediately after the grub menu disappears I get the following error msg: Error 18 Selected cylinder exceeds maximum supported by BIOS. Sometimes the grub options come up again (in Text mode) ...all works fine Sometimes just start via "Failsafe", reboot...all works fine. What is happening here and what would be the right procedure to avoid this happening again.
I have noticed that are a few applications (non part of the kde apps) that do not launch with alt + f2 (command name). Instead I have to use konsole first and write the command name, then the apps appears successfully.
The same problem I have of course with the same apps if I make a desktop shorcut. These apps never show up! Thus I would like to ask you what should I do to make these shortcuts and alt+f2 launches to work.
Im comming from ubuntu/mint and one of the things I got used too was doing something like "sudo nautilus" or "sudo gedit" and similar things. In Suse 11.3 I always get errors like the following
(gedit:6115): Gtk-WARNING **: cannot open display: kate: cannot connect to X server Could not parse arguments: Cannot open display:
or similar variations of these.What can I so to prevent this from happening? even if I do "su" and try from there it doesnt always work.I like Suse as it feels more professional then ubuntu, but I am trying to make it as user friendly.
