Imagine my surprise when, after accepting the proposed upgrades posted for OS 11.1 today, that my SeaMonkey email client shows NO messages from Sept. 2010 in any account, sent or received.
More info: Upon checking for messages, an unusually large number were seem to download (POP server) but few appeared in the in boxes. Old messages from August appeared for the first time.
How can I upgrade seamonkey 2.0.14 to 2.2 in terminal opensuse 11.4?
View 5 Replies View RelatedI have 2 machines running 11.1, but using 2 diff KDE repo sets . . .
On the first, I am using /KDE:/43:/openSUSE_11.1 as listed under the KDE 4.3.x section of the KDE repo's page. The installed KDE version is 4.3.3-3 but yesterday this repo was updated to 4.3.4-1. The corresponding repo for 11.2 now also has 4.3.4-1.
On the second, I am using /KDE:/KDE4:/Factory:/Desktop/openSUSE_11.1. Installed is 4.3.3-128, the most current. This is the same version as in the corresponding 11.2 repo.
IIRC (and I very well may not) for those of us who wanted to go to 4.2 (and later, 4.3) it was first advised to use the /KDE:/KDE4:/Factory set, but later it was advised to switch to the /KDE:/43:/ set.
In any event, since 4.3.3 is officially released by KDE and considered stable while 4.3.4 is not, it would appear the upgrade path should use /KDE:/KDE4:/Factory/11.2 (which is counter-intuitive to me, given the "factory" nomenclature; on the other hand, the "43:" section is not accurately described, so perhaps that's the problem).
how i can use the cal command so it displays the current month and the next month, i know you can use cal -3 9 2007 to show the previous current and next but i just want to display the current and next.
View 9 Replies View RelatedI'm looking for a powerful network traffic monitor that can do all of the following (or at least a combination of tools that can do the following):
Tell me how much data was downloaded/uploaded on an interface this month and the previous month tell me how the traffic was used throughout the monthshow which internal IPs (IPs in the 192.168.1.0/24 network) used how much traffic show which ports/protocols on those IPs used all that traffic
Hhow LIVE traffic flow statistics that can tell me total speed of traffic going through an interface as well asshow which internal IPs (IPs in the 192.168.1.0/24 network) are using how much of the traffic show which ports/protocols on those IPs are using that traffic
This tool will run on a linux router through which all my internal PCs are connected to the Internet. This means the tool(s) need to work with NAT (traffic being forwarded and not necessarily destined for the interfaced being monitored).
The distribution being run doesn't have a package manager so any packages or dependencies have to be manually compiled and SCPed over file by file. For this reason, the tool/tools need to be simple (things like vnstat, not things like ntop that have their own web interface).
I know that vnstat can tell me the first bullet point so it's only there incase there's a tool out there that can do everything. If there's a tool that can only do the second or third bullet point, that's great too - I'll just keep using vnstat and look for something else to do the other task.
I have to do it on several machines, so I wrote a script. You don't have to reboot but you must exit X. Use it at your own risk
Code:
#! /bin/bash
# --------------------------------------------------------------
# What it does :
# - unload fglrx if needed
# - make a copy of /etc/X11/xorg.conf (if any)
[code]....
Will KDE4.4 eventually move into the 11.2 updates or do I have to add the KDE Factory repo to get this update?
View 3 Replies View RelatedYaST-->Software-->Online Update Getting error: There was an error in the repository initialization. 'repo-non-oss': Failed to cache repo (139). History: - repo2solv.sh "/var/cache/zypp/raw/repo-non-oss" > "/var/cache/zypp/solv/repo-non-oss/solv"
Output of zypper lr:
# | Alias | Name | Enabled | Refresh
--+-----------------------+-----------------------+---------+--------
1 | openSUSE-11.0-Updates | openSUSE-11.0-Updates | Yes | Yes
2 | openSUSE-DVD 11.0 | openSUSE-DVD 11.0 | Yes | No
[code]....
If I disable the repo-non-oss repository the update works fine. The URL I have for the repo-non-oss repository is:
Index of /distribution/11.0/repo/non-oss
This has been going on for over a week. Do I need to use a different URL for the non-oss repository? I live in New York, United States.
My system (opensuse 11.2, kde 4.x) got significantly slower after a year of usage. Its response time is higher, boots longer. Filesystem is ext3 and is not fragmented. Number of daemons loaded on startup hasn't changed.
View 9 Replies View RelatedI have tried to install AWN for a month now, on 3 different 11.2 installations and kde and gnome, and would really like to know why I can't install it. I have tried:
- packman 1-click
- packman individual package installations
- rpm installation
and I keep getting these errors
- libawn1>=0.2.6 needed by avant-window-navigator-0.2.6-6.45.x86_64
- libpython2.5.so.1.0()(64bit) needed by libawn1-0.2.6-6.45.x86_64
and believe me I have tried to find these and have tried even similar looking things, no luck this is getting my opensuse experience down.
I wasn't paying proper attention when adding a repo to yast and need to find the file were the info is saved to delete this. The problem is that whenever i use yast it comes up with an error code saying that it can't find the data for the 'problem' repo. Have tried zypper rm but that comes up with a similar error advising that the data is in a format that was not expected. My thinking is to track the file were the yast repo source details are saved, delete this and then just add the repos that i use back.
View 6 Replies View RelatedI've just updated my system from SuSE 11.2 to 11.4 (I'm using KDE desktop environment) I like to install SeaMonkey myself. I use the installer from the Mozilla site. When I try to run SeaMonkey, this is what happens:
Code:
./seamonkey-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory
Where do I get the missing library? I've tried searching for it on the rpmpbone site RPM Search and even they couldn't find it.
I just updated Java and when I checked in my plugins for SeaMonkey, Java is not listed, not even IcedTea. When I looked at FireFox's plugins, the only Java listed was IcedTea.
How can I get SeaMonkey to know that Java is installed? I looked for the 32 bit Java from within YaST but saw none, just the 64 bit.
Anyway, these are the java's installed:
I'm running SuSE 11.4 and my browser of choice is SeaMonkey 2.0.14.
This is a list of my ~/.mozilla/plugins folder:
Code:
I just wanted to know which Browser would work better with Java, Flash etc. I've heard good reports that SeaMonkey has alot more to offer, but firefox is more..."nice"
View 5 Replies View RelatedWhen using SeaMonkey to view the following website, the whole computer "crashes". It crashes in the sense that it no longer accepts input(via keyboard and mouse), and the screensaver does not activate when the laptop screen is closed. The screen does not go black and the Caps Lock key does not flash as in a kernel panic. This is the only time in my entire lifetime of Linux that an application actually crashes the system and has effects similar to that of a kernel panic.
This is the website:No Ordinary Detention Full Episode - No Ordinary Family - ABCThe video plays for some time, but after a while the computer just stops responding to input and the video(unfortunately) stops playing.Unfortunately, I can not say much looking from the kernel log(/bin/dmesg), because each time I restart my computer, it is erased. Also, I checked the System Log(/var/log/messages), and nothing seemed out of the ordinary.I watched a previous episode of the show on the same website using Opera, and all fared well. However, what could be the problem with watching it using SeaMonkey?openSUSE 11.3 64-bitSeaMonkey 2.0.11Adobe Flash 10(10,0,45,2)KDE 4.5.5X.Org X Server 1.8.0
Today I did the Seamonkey 2.1 update. I found out that some of the add-ons or extensions did not work. They were disabled, due to incompatible versions. I found out a simple solution. I hope this helps some. This helped me with the Webdeveloper, fxif and Novell Moonlight extensions. In the file install.rdf is an element called MaxVersion. Change this to 2.1.* and the extensions work again.
The file install.rdf is to be found in ~/.mozilla/seamonkey/user-thingies.default/extensions/{extensioncode}
The changed code for Moonlight looks like this:
Code:
<Description>
<em:id>{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}</em:id>
<em:minVersion>2.0b1</em:minVersion>
<em:maxVersion>2.1.*</em:maxVersion>
</Description>
Good luck if you are a Seamonkey user.
openSuSE gurus, after several weeks I've finally managed to get aMule to listen external calls from Mozilla browsers. To make it quick: In Seamonkey or FF do about:config and add
Code:
Key: network.protocol-handler.external.ed2k
Tyoe: boolean
Value: true
Key: network.protocol-handler.expose.ed2k
Type: boolean
Value: false
[Code]...
I upgraded to F15 from F14 via a yum upgrade using an F15 repo. Things seems to be working mostly OK except for some shared drives on Windows Server 2003. In my /etc/fstab file I have this:
Code:
# /etc/fstab
# Created by anaconda on Fri Oct 8 18:32:22 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
[Code]...
I absoultely cannot figure this out... No matter which browser (FireFox, FireFox4, Seamonkey, etc) I try to use, I always get this error message:
Replace "seamonkey" with whichever browser stated previously.
how to upgrade qemu and kvm to version 0.12 on repo?
$ sudo kvm | head -1QEMU PC emulator version 0.9.1 (kvm-72), Copyright (c) 2003-2008 Fabrice Bellard
$ apt-cache show qemu-kvm | grep VersionVersion: 0.12.4+dfsg-1~bpo50+1
I want to have most my system in Debian Stable and a few packages updated to a version that is not in Stable repos.For example Abiword. With the one in Debian Stable I have many issues.I could add Debian testing repos and update it, but then I will have to upgrade to testing a lot of programs that I didn't intended to upgrade.ex: Abiword in testing may requiere libc6(testing) and with that I would have to upgrade a lot of programs that will not work with a newer version of libc6.
View 4 Replies View RelatedDebian 504 64-bit
Emacs 22.2.1
I have emacs running on the box
$ apt-cache policy emacs Code: emacs:
Installed: 22.2+2-5
Candidate: 22.2+2-5
[code].....
Way back in the day (7 something I think) I had made my .evolution into a link pointing to a very large harddrive. That said, I've never had a problem as evolution happily grabs and stores my e-mails at that linked location. Since the upgrade to 11.04, I still have evolution but it does not store it where I expect it to store it. I still have my little .evolution link in my profile. I still have my old e-mails there but I have no idea where evolution is storing my new e-mails. I don't have any of my folders and my online e-mail stack is growing by the minute
View 6 Replies View RelatedI upgraded from Karmic to Lucid (Ubuntu 10.04) a few days ago (without backing up any data first). At first everything seemed fine but yesterday three things happened:
1. All my emails and address book have disappeared in Thunderbird. When I started Thunderbird, it took me through the wizard and seems to have overwritten my profile with a new one. There is only one profile in the Thunderbird folder and it seems to contain no emails and only a new, blank address book (the small size of the folder backs this up. I searched the hard drive but found no other emails or address book files.
2. My bookmarks have disappeared from Google Chrome. Again, it seems to have created a new, blank bookmark file. The bookmark.bak file is similarly blank and when I search I can find no other bookmark files.
3. The Pictures folder (in the home folder) is now empty; suggesting that ubuntu has either overwritten the Pictures folder with a new blank folder or deleted all the files in it. Again, when I search the hard drive for jpg files, it doesn't find any of the pictures that were in the Pictures folder.
How to refresh and reload the list of email into MUTT ? Which key?
Additional: how to go to folder SENT of gmail ? and configureation eventually?
In checking after upgrading with Preupgrade fromFC14 to FC15 here I noticed te yuom seems to show the wrong repos. How do I correct this?
yum clean all
Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security
Cleaning repos: adobe-linux-i386 fedora updates
Cleaning up Everything
[code].....
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
I use openSuSE 11.4 with semonkey Version 2.0.13 andsmplayer Version 0.6.9. I tried to play a .mpg file by using
the "Helper Application" smplayer. But nothing happens, onlythe following hint was put on the screen: "Use Enqueue in
Looks like this has gone walkabout. It used to be in the Education repo and still is but is missing several updates. This repo has also gone missing from wiki pages and from list of community repos in YAST. Seems a bit suspicious as though something has been changed again.Is GRAMPS now in a different repo or is it no longer supported in openSUSE? Is Education repo defunct?
View 4 Replies View RelatedI installed openSUSE on one of the spare computers in work to test it out before I install it on my own laptop. I tried connecting Kmail to MS exchange and did so successfully using POP 3 but never checked the box saying leave messages on the server and it removed the emails from the server. Now I have nothing in my Outlook Inbox on my XP machine. how I can restore the emails from Kmail to the server.
View 6 Replies View Related