I have setup samba (samba + openldap) as my pdc. Some windows systems which are added to the domain are not visible through the windows xp's network neighborhood. However all the clients can login, browse other systems except for those which are not listed in the network neighborhood. I have attached the smb.conf file for reference.
Code:
[global]
workgroup = MOBIAPPS
[code]...
i am trying the set up a simple home server and I can see it on windows computers, also i cannot accesses it with its name only its ip
[Code]....
I'm trying to share some folders over the network, but the shared folders are not visible on another computer. This is through double clicking my computer from the Network list in Nautilus. However, I can access the share by typing the full address(<computer name>/<share name>) in "File > Connect to Server...".Since I can't type the address manually from my blu-ray drive, I need to get the shares to show on the network. What is wrong with my settings?
View 2 Replies View Relatedi'm trying to set up samba so that i can connect to the printer in the den since we have wireless access. also, i can see my virtual box on the windows xp home ed desktop, but can't access it.so, how do i go about setting up samba so stuff is visible between my ubuntu machine and my families windows orientated network? i'm having a hard time finding anything on videos too. i'm taking a break from the remastersys stuff so i can get the more important things done, such as connecting my ubuntu machine to my families windows network. i don't know if the printer is wireless or not, but regardless, i can't find it.
View 9 Replies View RelatedI am trying to access a shared printer from one Ubuntu PC to another.
On the Server PC, I have the printer working, I have set it to shared, and I have set the server setting to Publish shared printers. I can see and use the printer fine from a windows PC.
On my Ubuntu Client PC, I have samba installed, including smbclient, and all other samba components I can think of. I can see other computers on my home workgroup (Windows and Ubuntu fine). I can also add a printer connected to my windows PC. However I cannot find the printer connected to the other ubuntu PC.
I see the instruction in the Samba guide saying
"Now enter your Ubuntu Samba Print Server (set up as above) IP address in the box on the left titled "smb://"."
However I do not have fixed ip addresses, so what am I supposed to enter in the box. If I enter nothing I can browse the network and can see the host computer, but the printer is not displayed. I can also see the printer connected to the windows PC. How do I 'see' the Ubuntu printer?
I have created a shared folder in my ubuntu. And checked allow guest user access. I can access this folder with my other ubuntu computer connected trough LAN.The question is if anyone have my IP address can he/she access to my shared folder?Are samba shared folders shared over internet too? If so, This will be a very dangerous security problem.
View 5 Replies View RelatedIs that normal for Ubuntu Linux to take 5 to 10 minutes for computers to show up in the Windows Network Neighborhood in Nautilus after startup. It also takes 5 to 10 minutes to show Samba shares on my windows computer using NetBios (not however by entering ip). Is there a lag because of a set time of netbios network broadcasts to exchange netbios information to resolve by WINS. Is there any way this can be sped up so I can use my network immediately? Is there any way to force these broadcasts?
View 1 Replies View RelatedI can see my windows folders in Fedora but cannot access fedora folders from within windows Xp.
View 12 Replies View RelatedWhat happen if we assign a static IP address to both linux and windows host?Consider host A is a ubuntu machine and host B is a windows machine. I first set a static IP for host A (W.X.Y.Z) and connect to it through ssh. Then I duplicate that IP for host B (W.X.Y.Z).The result was that I could no longer connect to the ubuntu machine!
View 9 Replies View RelatedI have update my linux server from mandriva 9 to mandriva 2010
I was working using samba 2.2.8 and now I have samba 3.5.3.I have transfer all passwd and smbpasswd to new linux.I have convert smbpasswd to tdbsam
when i am using win xp to logon on samba domain the windows XP does not load profiles from samba. I think that the problem is NTUSER.DAT storing in /home/user/profile
The same profile is working using samba 2.2.8 but not working in samba 3.5.3..
Well, as many proxy applications, GNOME Network Proxy Preferences only allow to ignore hosts. What I want to do is exactly the opposite. I only want to use the proxy for few sites. Is it possible to define only the allowed hosts in any way?
PS: I know FoxyProxy add-on for Firefox does this, but 1)I don't use Firefox and 2)I want the proxy settings system wide not only for browser.
I run a local apache server, that has some virtual hosts running. Now I want to be able to locally connect to these virtual hosts, but when I try this, it puts www and .com behind the url and says it can't find it. On Windows I know the equivalent, editing the hosts file. Is there something similar in linux?
View 1 Replies View RelatedI want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
I have two computers running Ubuntu 9.10, both have one shared folder. These were set up via Nautilus.
On computer 1 I can see and use the shared folder of computer 2 just fine.
On computer 2 I can NOT see the shared folder of computer 1 anymore since recently. I has worked in the past.
Some more information: the name of computer 1 is "daniel", the share name is "gedeeld". So the address of the shared folder of computer 1 would be smb://daniel/gedeeld/
Opening this address in Nautilus works fine on computer 1 (that shares the folder), but results in an error on computer 2.
Error: failed to mount Windows share. Please select another viewer and try again.
If I set:
Code:
hosts allow = 192.168.0.5 192.168.0.8
then only PCs with IP addresses 192.168.0.5 and 192.168.0.8 will be able to enter shared dir? And noone else? And if there's no "hosts allow" in config of Samba, Samba doesn't filter IPs? Is it correct?
I'm having some trouble with the user's home folders in Samba, ubuntu clients.I have a Samba server (Ubuntu Server 9.10)nd a bunch of windows clients and ubuntu clients too.On windows clients, each usercan see his home folder without problems, and the other shared folders too of course.The problem appears in ubuntu (i'm using gnome desktop with nautilus and the plugin for I enter Places->Network->Windowsetwork->DOMAIN->SERVER I only see the public shared folders, but no the samba user's home folder.I tryied connecting to samba through Places->Connect to Server and entering the username (for previous auth just in case) but nothing happens...
If, in nautilus I write smb://server/username, once it asked me for my user and password (but I told the popup to keep the password forever so now it doesnt ask me anymore :S), but it keeps not showing the folder under SERVER, the only way to access it is through smb://server/username directly. Even username@server does not work.Mi auth type in the Samba server is "user", and the auth config at my ubuntu client is also userJust in case.. when I type smbclient -L //SERVER -U username, it shows me the home folder ok.
In my fstab I have this entry to connect to my NAS box:
Code:
//192.168.0.1/share /mnt/share cifs username=user,password=******,auto 0 0.For a while it was connecting on startup with no problem (it connects via wifi). But now when I navigate to the directory there is nothing there. However if I run mount it reports this:
[Code]...
I have configured a samba server where I have configured it for /mnt dir to be exported/shared. When I verify this share, I see mnt dir but I want the content inside the mnt to be visible or chroot into mnt directly.
View 6 Replies View RelatedIve managed to install samba, I've shared a folder. I can access from a Windows 7 machine via \ubuntupublic. I can put files in the folder form the ubuntu machine and edit them on the windows box. I can put files in the folder/share from the Windows box but then I cannot edit them on the Ubuntu machine (they are read only and have a "Lock" over them). I can fix this by going to the properties of the file/folder in Windows and manually assigning "Everybody" full control (then the lock disappears and all is well.) I want read/write access to all the folders contents from both machines all the time (security is NOT a concern I WANT the permissions wide open) what am I doing wrong?
View 7 Replies View RelatedI have a problem connecting my OS X and Windows XP machines to an external drive that is attached via USB to my Ubuntu 10 server. I am running Samba and I believe that my config file (shown below) is appropriate.
Both the Mac and XP machines can see the server and can access a shared folder on the hard drive of the server machine. Both the Mac and XP machines can see the external drive listed in Finder (Mac) and Network (XP). However, when either machine attempts to access the contents of the drive, I get the following error messages:
Windows XP Machine [NAME OF EXTERNAL DRIVE] is not accessible. You might not have permissions to use this network resource. Contact the administrator of this server to find out if you have access permissions.
[Code]...
I can browse, add and delete files on my fc13-64 machine from windows xp or vista. But not from the fc13-64 machine to or from any of the windows machines. I have installed samba, smb and nmb are running (reliably) selinux is disabled and the firewall is on; although i have noticed with it off I can't browse in either direction. Can't browse windows with samba but can browse samba with windows, is a problem I overcame with fc-12 but I can't remember how.
# Samba config file created using SWAT
# from UNKNOWN (127.0.0.1)
# Date: 2010/06/13 11:16:24
[global]
workgroup = OFFICE
server string = Samba Server Version %v
log file = /var/log/samba/log.%m
max log size = 50
cups options = raw
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[Public]
comment = George's Public Folder!
path = /home/george/Public
read only = No
guest ok = Yes
[Downloads]
comment = Downloads in George's folder
path = /home/george/Downloads
read only = No
guest ok = Yes
I installed samba (in Ubuntu 9.10) and I can access shared files in Ubuntu from Windows 7 but when I try to access W7 files from ubuntu: Places>Network, it prompts me Username,Domain, Password. I tried Username = W7 usernameDomain=my workgroup (MSHOME)Password=W7 login passwordbut it prompts me same thing again...checked some other related threads but couldn't get any luck.
View 4 Replies View RelatedI've got two computer :
- My laptop, with Ubuntu 10.04
- My PC, with Windows Seven
When I try to access my shared files ON my PC FROM my laptop, Samba ask for a password. I typed my Windows Seven login/password, pressed OK... and again, Samba asked for the password. I thought the problem came from Windows Seven, not allowing remote access from a local user account... I tried to allow anonymous access on my PC, but it didn't help...
But then, I learned I could also mount my shared files by adding a line in /etc/fstab :
Code:
//192.168.1.2/Users /media/KynePC smbfs credentials=/etc/samba/cred-file,rw 0 0
In the cred-file, I put the exact same login and password then before... and bingo, it works.
But the problem is not fully resolved, as I can only browse files from the "mounted shortcut". I can't use my remote printer anymore, or access any external HD that I share on my PC So I really need to get samba working.
I have a problem with 'Samba' shares on Ubuntu 8.04. Bringing shared folders over from Windows (on another computer) is not a problem...until I try same process with a Windows backup folder holding .tib data from an 'Acronis' backup.The files appear in Ubuntu Network, everything looks o.k., Ubuntu just won't copy the data to another folder. Other shares work without a problem, its only with these ':.tib' data.
View 3 Replies View RelatedI made a Ubuntu server and it is pretty cool. I had a windows computer that I could copy and paste files to and from over the network. What you did is just find it in My Network and the files were available there. How do I make Ubuntu or Samba act like that?
View 2 Replies View RelatedI setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300]
path = /media/Secondary Storage
available = yes
browsable = yes
public = yes
writable = no
[500]
path = /media/New Volume
available = yes
browsable = yes
public = yes
writable = no
I'm able to connect to a networked Windows machine and its shares using the Places -> Network -> Windows network interface, but unable to do so using smbclient at terminal command line. I can see the shares using:
smbclient -L //server -U username
But when issuing the command:
smbclient //server/service -U username
I get:
domain=[server] OS=[Windows Server 2003 R2 3790 Service Pack 2] Server=[Windows Server 2003 R2 5.2]
tree connect failed: NT_STATUS_BAD_NETWORK_NAME
The share name has spaces, like
lab raid root share
I use 40 to fill in the spaces. This problem must be something fairly simple if I can connect via the Places GUI but not through the command line.
Been trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
I'm using Ubuntu 9.10 and trying to install a printer over the network which is plugged into a Windows 7 machine. I can see the workgroup fine and the computer fine on the network, but when I try to double-click on the computer (both via the nautilus and the printer setup route), it asks me for a username, workgroup and password.
I tried the account's username and password and username "Guest" with no password but neither worked. The weird thing is that when I booted my machine into Windows XP and tried to install the same printer, it never asked me for a username and password and installed just fine. Why is Samba/Ubuntu asking me for the Windows 7 password when Windows XP didn't need it?
I had 10.04 set up in my computer so that I had two folders in home, they connected to folders in a windows 7 computer by adding the following to the fstab file:
Code:
//10.0.0.80/Movies /home/loco/Videos/Movies cifs username=guest,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0
[code]....