Networking :: Resolve The Particular Ip And Display The Page?

Dec 14, 2010

how to resolve this address on dns: 192.168.1.10:8080

so the user don't need to remember the address and the port.

let's say the user will just type: http://possystem then it will resolve the particular ip and display the page. is it possible to do this on linux?

View 1 Replies


ADVERTISEMENT

General :: How To Display Every Man Page Available On A Unix System

Jul 16, 2011

How can I display every man page available on a unix system? I want to list them all in an easy manner without manually digging up all the search paths, etc.

View 1 Replies View Related

Fedora :: Kaffeine DVB Will Not Play Display / Resolve This?

Jun 30, 2010

I had a fully working fc12 using Kaffeine to get DVB-T using a Nova T-500.
After installing and updating latest fc13 (and Kaffeine) I cannot get it to see the TV. It has scanned Ok and the TV card is detected OK in warm state.
As I also had no sound I looked at the differences in the sound GUI between my fc12 and 13.

Kaffeine is detected in fc12 but not shown in fc13.

Just tried Totem Movie Player and tried to tune the DVB-T but it gives a gnome DVB failure, so my problem is in fc13/Gnome.

Could someone advise me as wht I can try so that I can continue using Fedora?

View 1 Replies View Related

Ubuntu :: Firefox Does Not Display The Entire Page Source?

Mar 30, 2011

First of all I want to say that I'm new to Linux. I am using Ubuntu 10.04 LL and i want to create a html page, in terminal mode, but firefox does not display it correctly. i used this tutorial, http://linuxcommand.org/wss0030.php , but it seems that whatever i do, when i run the page with firefox (x@ubuntu:~/bin$ firefox page.html), the page displays the #!/bin/bash line, it doesn't interpret variables, reserved words, or any other special characters ( $, <<- ). I've tried to change the encoding in firefox from Unicode-8 to Unicode-32 but no luck

View 9 Replies View Related

Ubuntu :: Unable To Save Firefox Display Page Properly ?

Jul 16, 2011

I am using firefox 3.6.18 in Ubuntu 10.04. My problem is that if I try to save some webpage in postscript or pdf format, I go to file>print>print-to-file option and choose output file as ps or pdf format. Now if I click to print, I do get the corresponding page saved in ps/pdf format but only the first page is printed(i.e., saved in ps/pdf format) this way, leaving major portion(may be eight pages for example) of the corresponding webpage unsaved. (the option: range of printing: all pages is chosen by default.) Why is this happening and what should I do to print the entire page? (one example is the following page which you may try to save in the way I described above: [url]

View 2 Replies View Related

Software :: Apache Run Perl Then Create Index Page And Display It

Sep 15, 2010

I've got a perl script which generates an html file. What I'd really like to do is send people to just one page (the perl page) which then generates the html and shows the html page in question. Thus the whole transition will be invisible to the user, they'll just have an html page.FYI the perl script generates a list of the users who last logged in to the system, it needs to be up to date (by the second).Let me know if this isn't clear, I understand it sounds a bit confusing...

View 4 Replies View Related

OpenSUSE :: Kinternet Doesn't Display Application Launch / Resolve This?

Mar 17, 2011

I recently installed kinternet from a repository and when I enter Menu -> Applications -> Internet, there is no kinternet application.

I need this, to display the icon in the tray bar, so I can see if Internet is connected or not, and if it isn't I connect clicking on the icon.

View 6 Replies View Related

Programming :: Display Some Simple Animation Done By A Local Process In The Internet Browser Page?

Jul 29, 2010

creating a small plug in capable of redirecting some application's output in the browser's window.

I intend to display some simple animation done by a local process in the Internet browser page.

View 1 Replies View Related

Ubuntu :: Make OpenOffice Display "Web Layout" By Default - Get Rid Of Page Gap?

Jun 10, 2011

I always enjoyed the feature in Microsoft Word when in "Print Layout" where I could make the end of one page touch the beginning of the next page so the pages could be viewed seamlessly. There appears to be no way to do this in Writer Anybody know if this is possible in Writer?

As a work around I use WEb Layout to view documents. But everytime I reopen OpenOffice it defaults to Print Layout. Anybody know how to make it default to Web Layout when it is opened?

View 4 Replies View Related

Programming :: First Image Will Display On The Page, And When A User Puts Their Cursor Over It, Then It Will Load Image 2?

Nov 24, 2010

I have just exported 3 png files out of gimp for a html document I'm working on right now, and they are all almost the same, except I need each to load when the user does something. So the first image will display on the page, and when a user puts their cursor over it, then it will load image 2. When they press it, it loads image 3.

View 1 Replies View Related

Fedora :: Npviewer Segfaults - Firefox Sometimes Shows The Title Of A Page In A Tab But The Page Is Blank

Nov 23, 2009

On FC11 64 bit with Adobe flash plugin for Linux installed, I see segfault errors from "npviewer" in /var/log/messages. The only browser I have tried yet, Firefox, has glitches every now and then. Sometimes it shows the title of a page in a tab, but the page is blank. This can even happen when I try the Google main page. Is it true that npviewer has something to do with Adobe flash? Is there a way to fix the problem? If it is caused by Adobe flash, is there a different plugin that will replace Adobe flash player?

View 1 Replies View Related

Ubuntu Installation :: 10.10 Netbook / Hitting Next On First Page Mouse Icon Changes But Next Page Never Loads?

Oct 12, 2010

i am able to try ubuntu and everything works fine until i try to install. the menu comes up to the first page where it tells you to plug in your machine and make sure there is enough disk space and network connectivity. when i hit next on this page the mouse icon changes but the next page never loads. the longest i let it hang there was 2 hours. ive tried multiple times with the same result.

im running from a flash drive on an ASUS Eee PC 1001P-PU17

View 4 Replies View Related

General :: Find Page Hit And Page Miss Ratio In Fedora Core 12?

May 10, 2010

How can I find page hit and page miss ratio in linux fedora core 12?

View 3 Replies View Related

Hardware :: HP Deskjet 940c On Linksys Printserver Prints Alternating Good Page And Bad Page

Mar 9, 2011

I have a problem printing to my HP printer.

What is my problem? I have a page (one page - text an graphic) to print. When I sent it to my printer it prints OK. When I sent it agian, the output is totally garbled. When I sent it again (a third time) it is OK. Sent it again (4th time) it is garbled. Sent it again ... you get the picture ;-). Alternating good and bad pages.

What is my setup? I run Fedora 14 with Cups 1.4.6. The printer is a HP Deskjet 940C. It is connected to a linksys wireless print server. It is configured in CUPS to use ipp printing. The driver I use in Cups is 'CUPS+Gutenprint v5.2.6 Simplified (color, 2-sided printing)'.

View 2 Replies View Related

Fedora Servers :: Copied The Web Page Files To Its Document Root <var/www/html> & Disabled The Default Web Page?

Jun 8, 2009

I have apache httpd server on my Fedora 10I got 2 problems:First : I copied the web page files to its Document Root <var/www/html> & Disabled the default web page. But when I visit http:/localhost ,it shows up the list of files in <var/www/html> as if a ftp server browsed in web page. So how can I set http://localhost load my default web page index.html ?Second :I want to set up a web server on Internet through my router . I applied for DDNS account & input it into router correctly . I set virtual host in server to redirect any access from port 80 to 192.168.1.2:80 in LAN . Just for in case , I also download and running the DDNS software & installed it on PC 192.168.1.2 in LAN . My DDNS provider is oray.cn . It's a Chinese server provider . I don't think there is anything wrong with oray.cn . But if you need its information just visit oray.cn (Google can translate it for you). So I want to know did I miss something to set up a web server in this kind of situation

View 2 Replies View Related

Ubuntu :: Firefox Font Sizes Vary From Page To Page?

Jul 11, 2010

10.04; 64 bit In Firefox, the size of the fonts varies greatly from site to site. Some are too small to read, others huge. Some headings and menus overlap.Screen size: 1152 x 864

My settings are:
Proportional: serif 14
Serif: Times New Roman
Sans serif: Arial
Monospace: Courier New 14

View 1 Replies View Related

General :: Error - You Must Be Logged In To Access This Page, Go To Logon Page

Jul 26, 2010

All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.

View 2 Replies View Related

Programming :: Executing Commands From Web Page And Outputing It Back To The Web Page?

May 8, 2009

wanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !

View 8 Replies View Related

Ubuntu :: How To Name Page Up & Page Down Buttons In Global-keybindings

Mar 26, 2011

Can anyone tell me how to name Page up & Page down buttons in global-keybindings to use the custom commands with these buttons?

View 1 Replies View Related

Ubuntu Networking :: Set Display And Xhost: Unable To Open Display "XXX.XXX.X.XXX:0.0"

Jul 20, 2011

I have configured an instance in AWS EC2. I am trying to set the display back so I can run x apps. I login using ssh -xy -i...

export DISPLAY=XXX.XXX.X.XXX:0.0
echo $DISPLAY to verify
xhost +
xhost: unable to open display "XXX.XXX.X.XXX:0.0"

I have commented out nolisten tcp as suggested HERE I have modified /etc/gdm/custom.conf as suggested HERE Actually, the last suggested modifying /etc/gdm/gdm.conf, but that file didn't exist, so I added the line: DisallowTCP=false to /etc/gdm/custom.conf I rebooted, and still I get: xhost: unable to open display "XXX.XXX.X.XXX:0.0"

View 2 Replies View Related

General :: Combine 4 Page To Single Page?

Jul 6, 2011

I want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:

a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps

Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.

View 3 Replies View Related

General :: Vim: Substitute For Page Up And Page Down Keys?

Aug 11, 2011

Vim: substitute for Page Up and Page Down keys?

View 4 Replies View Related

Slackware :: Boot Process Page By Page?

Aug 14, 2010

When I boot slackware, I have all the boot process that run but too fast. I don't have time to read what's running. Is there a way to to go page by page. I didn't find any key in my keyboard to stop and go.

View 16 Replies View Related

Fedora Networking :: Can Resolve Some URLs But Not Others?

Dec 29, 2009

Over the weekend I upgraded my home PC from Fedora 9 to Fedora 12, and now I'm having problems connecting to the Internet. Basically, I am able to connect to some URLs but not others, and it happens in both Firefox and Konquerer. I am able to connect to url, url, url and url with no problems. However, when I try to connect to slashdot.org, url, fedoraforum.org and rpmfusion.org I can not. All the other Windows PCs in my home using the same 2Wire home portal are able to get to the sites using IE with no problem.

I first suspected a DNS issue, but the "host" command returns a valid IP address for all the URLs that I can not reach. Another symptom is that the following command

Code:
su -c 'rpm -Uvh url. url
(from rpmfusion.org/Configuration/) also doesn't work when entered at the command prompt. However, when I did "host download1.rpmfusion.org" and edited the command to use the IP address returned instead of "download1.rpmfusion.org" it worked. But then, the next time I ran "yum" it failed because it couldn't find the rpmfusion.org URL in the installed repository entries.

After reading some other threads, I tried disabling avahi-daemon, but that had no effect. I also tried examining /var/lib/dhcpd and /var/lib/dhclient, but neither file existed on my system.

View 3 Replies View Related

Ubuntu Networking :: Could Not Resolve Host Name?

Apr 29, 2010

I'm having an issue where some of my machines hostnames are no longer able to be resolved after setting up a mythbuntu backend to allow netboot. Also it seems that which machines hostnames get resolved is not consistent. (ie sometimes one gets resolved and sometimes it doesn't) I suspect that it has something to do with the changes I made to "/etc/ltsp/dhcpd.conf" to get the netboot running.

I have a Verizon DSL modem/router as 192.168.1.1. Up until playing with the "/etc/ltsp/dhcpd.conf" I saw hostnames of all of my machines show up in its network map. Now, some of my machines still get network access but their hostnames are no longer resolved. What did I do wrong? Here is my dhcpd.conf file:

Code:
# Default LTSP dhcpd.conf config file.
authoritative;
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.2 192.168.1.250;

[Code]...

View 4 Replies View Related

Ubuntu Networking :: 10.04 - Cannot Resolve Names Using DNS

Sep 16, 2010

A while ago I downloaded a VMWare VM for 7.10. I then upgraded it to 8.10 and it was working just fine. I just did the upgrade to 10.04 and I'm having problems with my networking. The really odd thing is that I can ping machines on my local network and out on the Internet by IP address but it will not resolve names using DNS.

I've got the network set up for DHCP. I also tried DHCP address only and manually entered my DNS server addresses but still no luck on resolving names with DNS. At the end of the day, I don't really care if I get this fixed or just get a new VMWare VM. (I can't create one because I only have the player.)

View 6 Replies View Related

Networking :: Configure DNS To Resolve Hostname

Sep 8, 2010

I got an application deployed on Websphere Application Server on SUSE Linux V 10. We are accessing the application using the IP address in the URL. Please let me know how to configure the DNS, so that we can use the Host name in the URL and the Host name is automatically mapped to the IP address.

View 1 Replies View Related

Networking :: Hosts Not Able To Resolve IP Address?

May 28, 2010

I have to build a netwrok for small lab and office setup.Setup as belowI have a PC running with Centos 5.4 and has 4 NIC cards. eth0, eth1, eth2 and eth3

View 3 Replies View Related

Networking :: SLES 10 SP3 Will Not Resolve DNS Names?

Feb 14, 2011

I have setup an static IP on this server, it will ping internal sites , but when I try to browse the internet it does not do anything. I have set up the gateway, the firewall, and the domain fie, but still no luck.NOTE: When I try DHCP it will work ( it will resolve the DNS of the pages), but since this is a server it requires an static IP.

View 2 Replies View Related

Networking :: Unable To Resolve IP To Hostname

Aug 1, 2010

i searched the internet on how to resolve IP to hostname in my internal network. However, i could not find any solution to it. Any gurus around have any knowledge on this? i have tried whois, dig and nslookup however it doesnt give me anything.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved