On computer, I have apache server, configured at port 80, running. In local network, web page is accessible by my local IP (192...). Although, when I want to get to the page from the internet, I don't know right ip address, since router's one should be local, and also, router has it's own web page running at port 80. So I guessed that my server IP would be modem's one, which I don't know. Sometime in past, I figured out address of modem too, but it has it's own application running. Also, router supports port forwarding (which I guess, is needed), but I don't know how to get using to it. what address from internet should I have? How should I determine it?
What command would you use to read about the sync system call (not the sync command)? How would you read a local man page for sync that was kept in the /usr/local/share/man?
im making client(browser) and proxy server application in linux and using c/c++....can any one guide me that how proxy server get page from internet and send it to the client (browser)?and how that page will be displayed on my browser??meanz that will be only text...if text then how i can display graphical page....
When I boot slackware, I have all the boot process that run but too fast. I don't have time to read what's running. Is there a way to to go page by page. I didn't find any key in my keyboard to stop and go.
i'm a college student studying pc programing, and i was given today a special work and i have to program using miranda... which i've never used it >.< can anyone give me a hand to where to download, how to compile, and a simple tutorial for making a simple program or something?
I have just exported 3 png files out of gimp for a html document I'm working on right now, and they are all almost the same, except I need each to load when the user does something. So the first image will display on the page, and when a user puts their cursor over it, then it will load image 2. When they press it, it loads image 3.
I have an interesting issue with simple scan. When I scan a single page document, the exposure is not very good because there are dark and light areas scattered over the entire document. Of course, one cannot adjust these settings in simple scan as one can with xsane. However, I noticed if I scanned a multiple page document, all pages after the first seemed to be more consistent and the exposure was fairly good (exposure here referring to all the aspects accessable in xsane such as brightness, contrast, gamma, etc.)
So I tried a little experiment. I scanned a single page document as if it were a multiple page document by scanning the document multiple times in the same session.The same thing occurs as if one were scanning a multiple document: the first page is mottled, but all pages after are much better scans. What is happening here?
just now i have installed squid, it works fine with authentication . I created this authentication in a simple text file by using htpasswd . my question is that is there any web based simple page to change passwords of squid users, because each and every time i cant give direct access to server for my squid users .
I am using spotify native for linux. I would like to make it work with the browser so when I click on a spotify link it opens spotify and it goes to the right song/playlist/user I have not much idea of linux. I am a standard user. I am a philosophy student if you know what I mean. On their website I found a script. But it is for wine. I need one that uses the native binaries (I have checked that /usr/bin/spotify actually exists)
wants to do miniproject as part of the academic curriculum using Computer graphics on Linux using C or C++. Can any one direct me to a direction how i can proceed. I know basics of C and C++
I'm trying to create something like this:[URL]...when you press "fire" you see the graphic.My program already does all the math, but what i want is that animation of the projectile moving depending on the entered data.i really don't know how to accomplish that.I'm using Gtk#.what would i need to create something like that??
wanted to know if i can execute commands on linux console through a web page and redirect it back to my web page !For example :if i send a query "ls"it should execute this command on my linux console and also redirect the list of the files to the web page from which i give the command !
I can't log to any page using Lynx browser, what I see is "403 Forbidden" message everywhere. I think it has sth to do with User-Agent field, I tried both "Lynx..." and "L_y_n_x...", but also "Opera", "Mozilla" etc., but that doesn't help. It could also be related to cookies, but I accept all cookies the browser asks me.
Freeze browser wait for end of loading URL datausing Namoroka firefox 3.6.4pre Ubuntu/9.10 karmicproblem started app 2-3 weeks ago, same time working on JAVA update.JAVA test OK .most download locations seems to freeze or not complete loadingonly forced close/reset af browser is helping.how to find the change causing this?
I have created a php page with only PHP Code: <? php echo "OK"; ?> in the code. When I go to that page in a browser, I get a blank page. Is that normal, or am I suppose to see the word "OK" displayed in a browser? When I became curious, I open up Wireshark to capture the packets, I see that my server is giving out a "HTTP/1.0 500 Internal Server Error".
Here's the entire tcp stream: Code: GET /services/test.php HTTP/1.1 Host: 192.168.1.5 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 .....
I've installed CentOS 5.3+ xampp 1.7.2 (apache,proftpd and php5) +postgresql 8.4. And some strange errors appear from time to time, but can't reproduce it by wish. For example client opens a webpage on CentOS, the page can be open many times, but in some moment browser gives error as for non-existing page and when I check lampp's logs, there is only a record in error_log "[notice] child pid NNNN exit signal Segmentation fault (11)".
Or another example: client opens ssh-connection and ftp-connection. When ftp-connection got timed out and server closes it, ssh-connection unexpectedly gets closed the same moment without any errors in logs. And again it happens not everytime, but cannot be related to physical network because the same server on the same network with Fedora never had such errors. Possibly xampp-1.7.2 is not too compatible with CentOS 5.3? How to get more info from system in this case?
What's the best way to get a list of the start order of services from systemd? Yes, I've tried
Code:
systemctl --order
This looks like the output I would expect, except that if that list is the system service start order, then my system is hosed. I certainly hope that my system is not starting nfs service before all the /usr/export filesystems are mounted.
I tried
Code:
systemd --test --system
but that generates over 22 thousand lines of gibberish! I filtered that with
Code:
systemd --test --system | grep -- -> | grep Unit | grep -i service
And it's less gibberish, but it's ALMOST the reverse order of the first command, and still pretty crazy.Ultimately, I need to discover, and fix the order of the services started by systemd, because they were mangled during the upgrade from Fedora 14 I hope that "systemctl --order" is either not the real deal, or I'm reading it wrong. Because if it is, I'm afraid I have a huge problem to fix.
Basically I'm trying to write a simple script that will have zenity display a yes or no question and then run a program depending on what I select. I'm also trying to figure out how to have zenity display a message after I select yes or no on the first display. I feel as though I'm forgetting to do something basic with the script...
I am looking for a SVN repository browser which dosen't have a restriction of creating a local copymy problem is as listed.I use projectlocker.com for my svn repo'snow once repository is creted i want to create a truck i.e a folder named trunk.and then checkout the truck on my folder and keep updating it as normal.earlier i used to achieve all this by simply using Tortoise SVN Browser and creating a folder.can any one suggest me a replacement of tortoise svn's Browser feature.Note : i know replacement of Tortoise SVN, i ma currently using PAGEVCS. I want a replacement of Repository browser.
As you've probably found out if you searched for this on Google, the new FAFSA page [URL] does not allow any Linux browser access to financial aid forms. The solution I found is to install User Agent Switcher for Firefox [URL] and restart the browser. Right click a toolbar, like the navigation toolbar near the back button, and click 'Customize'. Find the User Agent Switcher icon and drag it to the toolbar. Now you can change the browser's identity by clicking the little globe on the toolbar and select, for example, Internet Explorer 8. You should now be able to get beyond the first page of the new FAFSA website.
I installed opensuse 11.3 in my laptop compaq presario cq40 144TU consisting of Core2Duo T5800 with 4 GB DDR2 RAM. After installation of 11.3 i update the OS from online. i have a cable net with IP address / subnet mask / Gateway / DNS. All are working fine but all of a sudden there was a power cut in our locality and my cable net was delinked.
When the elecricity came again i tried to connect the internet for online updation, but all in vain. No page is openup though the terminal told me that "You are already logged in with process id 1425." When i typed the command to kill the process it said that there is no such process running.
After installing FC11 on my Mac Mini intel terminals, I noticed the network config GUI is completely broke, So I continued with a hand configuration.
Everything seems ok eth0 is up , it has the correct IP, DNS and default gateway, but browser quieries take forever to load.
E.g. if I type Google in the browser it takes about 20seconds before it loads the page.
To add insult to injury, I have a 16Mbit/s Down 2.5Mbit/s uplink. the other 10 or so rackservers on the network responds fast, so it is nothing to do with the network or connection. They all run FC7-9.
The problem is squarely with FC11 and must be some bug not reading or resolving DNS correctly. Anyone have an idea how I can figure this out with FC-11.
It seems to be the worst FC distro.
I generally was happy with all FC6-9, but 11 really sucks (the ppc version wont even install on my ppc terminals)
That the Mighty Mouse Wireless, worlks out of the box is very nice though, but that is all.
I'm using fedora 14. And I have installed apache, PHP and MySQL. I tried testing PHP with phpinfo(). But when I view it view my browser (localhost/test.php) it just shows the code itself instead of displaying the phpinfo page. This is the content of my test.php page.