Fedora Networking :: Can Resolve Some URLs But Not Others?
Dec 29, 2009
Over the weekend I upgraded my home PC from Fedora 9 to Fedora 12, and now I'm having problems connecting to the Internet. Basically, I am able to connect to some URLs but not others, and it happens in both Firefox and Konquerer. I am able to connect to url, url, url and url with no problems. However, when I try to connect to slashdot.org, url, fedoraforum.org and rpmfusion.org I can not. All the other Windows PCs in my home using the same 2Wire home portal are able to get to the sites using IE with no problem.
I first suspected a DNS issue, but the "host" command returns a valid IP address for all the URLs that I can not reach. Another symptom is that the following command
Code:
su -c 'rpm -Uvh url. url
(from rpmfusion.org/Configuration/) also doesn't work when entered at the command prompt. However, when I did "host download1.rpmfusion.org" and edited the command to use the IP address returned instead of "download1.rpmfusion.org" it worked. But then, the next time I ran "yum" it failed because it couldn't find the rpmfusion.org URL in the installed repository entries.
After reading some other threads, I tried disabling avahi-daemon, but that had no effect. I also tried examining /var/lib/dhcpd and /var/lib/dhclient, but neither file existed on my system.
View 3 Replies
ADVERTISEMENT
Jan 22, 2010
I'm using wget to retrieve a long list of URLs, a small proportion of which fail, hence:
Code:
wget --input-file=urls.txt
Is there a way to log the urls that have failed? Unfortunatley wget does not output the current URL being processed (and then the status), so hard to see grepping the output helping.
Or should I use some alternative like curl, wmget?
View 1 Replies
View Related
Feb 22, 2010
I have a server with slackware 12 and i try to block 2 web sites but without success. I write in iptables rules /etc/iptables.conf
iptables -A INPUT -s web.org -j DROP
iptables -A OUTPUT -d web.org -j DROP
but no effect. What rule i must write to block url`s?
View 4 Replies
View Related
May 27, 2011
Does anyone have the problem where clicking a URL in an email in Thunderbird doesn't start up Firefox? It used to work in previous Fedora releases
View 6 Replies
View Related
Jun 16, 2010
I have a windows PC and a fedora 13 linux box. When connecting to the linux from windows, I'd like to type the hostname instead of the ip address. Apart from setting the hostname, what do I have to do to publish my hostname on the intranet. (set up a nameserver?)
Though hostname works on the linux box, even this fails: nslookup myhostname Also I'm a newbie. I've tried installing some packages like samba and dhcp, using yum...;service chkconfig... and then checking whether nslookup or nmblookup work with my hostname. But it's just guesswork. Under system -> Administration there is no network option. but it is not clear what package is needed to install it, or whether such a thing is supported in fedora 13. I did try system-config-network, but it has few options none of which pertain to hostname resolution. The fedora manuals dont seem to cover it, at least in recognizable plainspeak to me.
View 14 Replies
View Related
Jul 28, 2011
I've been trying to update Fedora 15 for weeks. I always end up with a transaction error and the update stalls. The error reads: GPG keys listed for RPM Fusion for Fedora Rawhide-free repository are installed but they are not correct for this package. Check that the correct key urls are configured for this repository.
This is far too involved for a linux newbie, I think my only option is to reformat and reinstall. This is so frustrating, there are 250 MB of updates available that I can't access.
View 6 Replies
View Related
Jun 11, 2009
I just installed F11 and can't make VPN connection to PPTP server using NetworkManager.
This is what I get:
** (nm-applet:8092): WARNING **: Error in getting active connection 'Vpn' property: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:8092): WARNING **: _nm_object_array_demarshal: couldn't create object for /org/freedesktop/NetworkManager/ActiveConnection/3
I can connect to this server from Fedora 10 using identical settings.
VPNC tunnels work fine.
View 1 Replies
View Related
Aug 13, 2009
I'm having a strange problem with my Fedora 11 install under VMWare Server. I can look up hosts in nslookup, host, and I can ping servers using their names, but when I use curl, firefox, or yum, it says it can't resolve the host name.
View 6 Replies
View Related
Nov 4, 2010
I've replaced Ubuntu 10.10 with F13 and can't connect to the Internet.
I'm using a WiFi connection to my router. I receive an IP address via DHCP. I can connect to the router's web configuration interface, 192.168.2.1. Same with my NAS web configuration interface.
I've also tried with Live CD (F13 and F14beta). Same thing: receive IP, connect to router's web interface, can't connect to Google.
As a check, I tried Ubuntu Live CD and I can connect to the Internet.
I've also tried F13 Live CD on my laptop. Can't connect to the Internet.
View 3 Replies
View Related
Jul 25, 2010
Code...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
View 1 Replies
View Related
Oct 31, 2010
Cannot connect to internet via Firefox or Midori on my Dell Inspiron 8200 laptop with a Netgear wireless card. However, I can update via yum, I can ping google from the CLI, I can ssh to my desktop, I can point a browser to find my router which /etc/resolv.conf points to, but can't get a browser to resolve hostname. I'm posting from a different machine (desktop), here is my /etc/resolv.conf:
[Code]....
View 14 Replies
View Related
May 30, 2010
Is there a way with SED to read this link:
[URL]
and then pull the individual links and list them in order each on a separate line? like...
[URL]
If SED can't do this is there another command or program that will?
View 1 Replies
View Related
Jun 28, 2009
I have a PHP script written that is checking a string to see if it contains a link in it (i.e. a URL). I have the following if statement, that uses 3 possible regular expressions to determine if there is a link or not.
Code:
// check if we found a link
// links are denoted by strings that:
// - contain http://
// - contain www.*.*
[Code]....
I'm not convinced yet that writing a shell script to do this is the best course of action. If someone is capable of doing this with a Perl or a Python script that's fine too. If you want to make it super high performance and write it in assembly
View 1 Replies
View Related
Jul 18, 2010
Is there any way to embed a URL to an external web page in the text of a tomboy note, in the same way that other notes are linked to? I know I can just pates the URL into the note and have it link out, but when the link is over a hundred characters long (not kidding) then that stops being an option.
View 1 Replies
View Related
May 6, 2011
I am currently in a more mixed environment as I desire and I need to mount samba shares because I need to work with the data. I noticed that nautilus does not really mount the shares and some applications cannot deal with smb urls. I searched and found this old thread: [URL]. Is it possible that after all these years, this is still unchanged? To permanently mount on boot time is not an option for me as the drive will not always be available - already changes when I move within the office from fixed to WLAN (e.g. when going to a meeting and vice versa).
View 1 Replies
View Related
Jun 7, 2010
I have a fresh fedora 13 install, I managed to browse and setup my phpadmin.....and browse everthing locally. I can not browse the web site from any other machine in my network. All my machines get their IPs from my dhcp (192.168.1.0).I googled and read a thread in this forum, I understood it might be due to SELINUX. I disabled it, rebooted, still have the same behavior, browse my apache locally but not from other machines. I did a telnet from one of my machines using the IP as followstelnet 192.168.1.11 80got the following onnecting To 192.168.1.11...Could not open connection to the host, on port 80: Connect failed.I checked error-log and access_log file, found no hint. I think it should be something related to some fedora systemor firewall or selinux config that is not allowing access to it.
View 4 Replies
View Related
Mar 13, 2011
There is this server that is running a lot of websites and runs varnish for caching for performance boosting. But I want to somehow remove certain URLs from caching which change frequently. But I do not want to remove complete domains from caching but certain URLs from the websites. Is there any way to remove those pages from caching?
View 2 Replies
View Related
Jan 11, 2011
I want to write simple firefox extension / script or anything to change URLs from HTTP to HTTPS for selected websites (e.g. facebook). That thing is actually bypassing some security checks in my network.
Can anyone tell me how to proceed? I can deal with language as far its C++ or Python (something else would just take more time that's all )
View 1 Replies
View Related
Jul 17, 2011
I am trying to map a URL to a file system location.According to official documentation at [URL] under 'Files Outside the DocumentRoot', it says:On Unix systems, symbolic links can bring other parts of the filesystem under the DocumentRoot. For security reasons, Apache will follow symbolic links only if the Options setting for the relevant directory includes FollowSymLinks or SymLinksIfOwnerMatch.
View 1 Replies
View Related
Feb 17, 2010
just update and dragging urls on plasma doesn't allow me to link as... preview, link..
View 2 Replies
View Related
Jan 3, 2010
I'm not able to reproduce a configuration which I had before.
The plot: openSUSE 11.1 i586, seamonkey 1.1.18, MPlayer dev-SVN-r30099-4.3-openSUSE Linux 11.1 (i686)-Packman = MPlayer-1.0rc2_r30099-1.pm.1.1, mplayerplug-in-3.55+cvs20090923-0.pm.2.2
My old system which died in a catastrophic hardware failure did write the URLs of all movies played with mplayerplug-in to a file located at $HOME/Movies/playlist.
How can I configure the new system to do it again?
View 5 Replies
View Related
Nov 7, 2010
im missing some of the repos in my package manager. can someone post all the repo urls that come with ubuntu 10.10 64-bit desktop edition
View 1 Replies
View Related
Dec 10, 2010
Ubuntu Lucid amd64, mutt-1.5.20-7ubuntu1
I'm pretty sure the following used to work:
Code:
$ mutt mailto:url?subject="Whoop dee doo"
Now mutt exits silently with status=1. Tried setting EDITOR/VISUAL, no difference.
Edit: I had tempdir pointed at a non-existent directory in my .muttrc. Still annoying that there was no error message, but at least things are working again.
View 1 Replies
View Related
Jan 26, 2011
I have a script(urls.sh) scheduled to run with Crontab at every hour. The script is all good and executes manually with [root@server cron.hourly]# ./urls.sh But the scrip is not executing according to schedule. This is what I see in /var/log/cron every hour:crond[4729]: (root) CMD (run-parts /etc/cron.hourly/urls.sh)My crontab look likes this:
SHELL=/bin/bash
PATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
[code]....
View 2 Replies
View Related
Aug 10, 2010
Squid acl rules can be configured to allow specific ip's to get full access, or rather skips the blocked site list.
acl <tag> src x.x.x.x
http_access allow <tag>
http_access deny blocksites
From all the ways i tried, squid does not log these urls. Is there a way to have squid log the urls requested from allowed ip's?
Specs:
squid ver : (squid/2.6.STABLE21)
OS : CentOS 5.5
View 1 Replies
View Related
Oct 12, 2010
Some time ago I read a discussion in /r/linux and someone mentioned a script that checks new messages in IRC channel (in irssi client) and if they contain announce urls for torrents, they are passed to a torrent client (rtorrent) for downloading. Sadly, I didn't bookmark it, nor I could find it now. Maybe someone has a similar script?
View 1 Replies
View Related
Dec 16, 2010
I'm deploying new ubuntu server which should act as a router. I've already set up the NAT for local network, and also did some shaping for different groups of users, but now I'm facing new problem.I need to make a scheduled URL filter. I know it's not a problem with cron and simple script, but maybe there is existing way to do that? And also, I need to make statistics on web-traffic. I need to have list of URLs visited by users (source ip, destination url). Is it possible with iptables? or with any other software but without using proxy servers.
View 9 Replies
View Related
Mar 17, 2011
my web host runs a linux server, and when i try to load a file in my browser (which i have uploaded in my web space) with non latin words it gives a 404 error (file not found). for example i have uploaded mydomain.com/νεο.html the word "νεο" is non latin. so when i try to reach this document from my browser i get the error.
View 2 Replies
View Related
Apr 16, 2010
I have a scenario.A domain [URL].. then there are 4 private computers on which applications are hosted at port 80. So when some one from outside access the site it look [URL]..I added
[Code]...
View 1 Replies
View Related
Apr 7, 2009
I have recently merged two Joomla 1.0 sites I ran into one. I imported the articles I wanted to keep to the new site, and I have the old site's domain pointing as an alias at the new site. The new site is www.theouthousers.com . The old site was www.bludblood.com .
I also have the core SEF URLs on, using the htaccess.txt file that came with Joomla.
I have one writer for the old site who linked to his articles in various places, so I am trying to set up redirects for him so that he doesn't have to change all of his links.
For instance, I need something like:
http://www.bludblood.com/joomla/inde...d=25&Itemid=51
To redirect to the equivalent location on the new site:
[url]
And I also need specific links like:
[url]
To redirect to their new counterparts:
[url]
Keeping in mind that www.bludblood.com is now an alias of www.theouthousers.com, is there any way to do this? I have been trying with rewrite rules and redirects, and cannot seem to achieve the desired effect.
Tried various versions of:
Code:
Redirect [url] [url]
With the http, without, as regexps, as 301s, as permanents, etc, and it just will not work. Also tried as RewriteRule.
View 2 Replies
View Related
