Networking :: Unable To Access Web Server From Machine
May 31, 2011
I have a weird issue where all of the machines in my office can all connect to our web server, either via DNS or using the server IP directly. However, on my machine, which is using the same network IP as the rest of the office and I know it's not being blacklisted, I can't access the server at all via SSH or web or mail. I'm the only machine running Linux, I've flushed the network cache using nscd, but this made no difference. Can anyone think of what might be going on here?
View 10 Replies
ADVERTISEMENT
Apr 9, 2010
I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies
View Related
Jul 15, 2011
I am unable to access samba share from my windows machine. I am getting the following error
View 9 Replies
View Related
Jun 12, 2009
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
View 1 Replies
View Related
Feb 13, 2011
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies
View Related
Mar 1, 2011
I've run into a weird problem. Two of my linux machines (A and B, both running CentOS 5.5) are connected to the same wall ethernet socket via a hub. Bothf them are configured for static IPs. The trouble is that when machine B goes offline or hits a kernel panic, machine 1 goes offline too. What I've noticed is that in this condition the "route" output from machine A does not show any entry for the default gateway either The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 for machine A are:
Code:
# Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
DEVICE=eth0
[code]...
View 3 Replies
View Related
Jan 17, 2009
I've installed centos 5 on an old computer with success and it works great.I can access the web server hosted on the centos server from any computer on the wireless and wired local network. I can also use ssh (putty) and nx client from any computer on the local network (wired and wireless) to access the centos server.On the wireless router I've configured a port forwarding to the wireless network interface on the centos server. I can access the centos server from the outside (internet) through this port forwarding both through http and ssh or nx client.MY problem is that I can't access the centos server from the internet through the wired network interface. Any attempt to view a web page or login with ssh or the nx client will timeout.
View 9 Replies
View Related
Aug 2, 2010
I am a newbie to linux of 4 weeks. I set up my first web server and it works flawlessly - when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.I have two network interfaces on my server, eth0 (public static IP connected to internet) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1
I added "192.168.1.1 www.server.com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.
HOwever, the server itself only opens website if the address is localhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www.server.com.I do not understand why the record in etc/hosts doesn't point it in the right direction. It seems that when I open address 192.168.1.1 it still gets routed to the external network. I have seen using DNAT to deal with the problem but it didn't work in my case (maybe I didn't do it correctly). I have spent whole evening/night trying to sort it out, it's 4AM now, going to bed frustrated and angry (at myself hahaha). Still like linux very much, won't be going to windows anymore. Please help
View 14 Replies
View Related
Jan 6, 2010
I have a ubuntu 9.04 machine i'm using as a file server. I'm able to see that machine from any XP machine, connect to it's shares play music, movies, work off of it NO problems. But i can't view the shares from a windows 7 home edition PC (garbage). AND, from the ubuntu PC, i can't see any of the other shares on network. I get "Fail to receive share list from server".
NOTE: Originally i had this machine connected with wireless card because of location. and I was able to see all shares then - both ways (still not from Windows 7 PCs though). However, when I moved to hard wire connection, the network disappeared. I've tried changing IP addresses, changing switches, but no network. I'd like to keep it hard wire. Can anyone point me in right direction or am i missing information?
View 1 Replies
View Related
Sep 12, 2010
ok so i ran into a problem, im using web min to access my server, and im setting up postfix and, dovecot first problem is i want to be able to access my email account from a web page, with log in, so my question is how can i do that?
View 1 Replies
View Related
Jan 13, 2011
I need to block all BitTorrent access on my machine, ie blovk users from using Bittorrent. Is there a port range I can block or some sort of protocol?
View 9 Replies
View Related
Nov 19, 2010
I have set up a 5.5 installation on a Virtual box VM. The Virtualbox (not for the VM) network preferences have DHCP Server disabled and IPV address and the network mask I believe are valid for my home network. My VM is up and running and it has gotten an IP address from my home router and everything seems fine. From any machine in my house I can ssh into my centos installation. I went ahead and started up the httpd service and the website is up. IOW, I can see it from my centos box - when I navigate to http://localhost However, I cannot see it from any other machine on the net. The IP address of the centos bos is 192.168.0.141. From the centos I can do a ttp://192.168.0.141 and see the Apache 2 test Page. I can see that from anywhere else. Although I can ssh to that machine.
View 4 Replies
View Related
Feb 23, 2009
i have been using samba to gain access into windows computer through my pc which has fedora 8 ..can i access the unix machine from another unix machine? is yes then what is the procedures ?
View 4 Replies
View Related
Sep 4, 2010
Possible Duplicate: Automatically start VNC server on startup I have a Linux server at home, and by default no-one is logged in to that box. I'd like to establish a remote desktop connection to it with VNC but this fails, unless I log in first physically. It's strange to me that VNC Viewer doesn't even ask for credentials, it just displays a "connection refused" error message. What's the best way to do this? I'm running Ubuntu 10.04 on the server.
View 3 Replies
View Related
Apr 19, 2010
To automatically upgrade i need to connect to a FTP server. Now do i have to allow wordpress access via apache to the machine it is on or do i have to create a ftp server on another machine with the files on it?
View 2 Replies
View Related
Dec 31, 2010
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
View 3 Replies
View Related
May 14, 2010
I am behind NAT using private IPs like 172.x.x.x in my lab. I need to access programs from other machines which are also behind NAT. What is the syntax of ssh command that i can run? Because when i make connection within one LAN for example:ssh -X 172.x.x.10 to 172.x.x.3 it works fine. I can access programs like gedit, firefox etc. But when i try to do the same on the machine that are behind NAT then i get this error;
[root@localhost ~]# gedit
(gedit:3977):WARNING **: cannot open display:
View 6 Replies
View Related
Jul 30, 2010
I need to deploy Windows Server 2008 R2 onto a server that is currently running Linux. Effectively, I want to restore a Windows disk image onto the Linux system hard disk.I don't have physical access to the machine, so I need to find a way to do everything remotely, using SSH (no KVM). And the Linux machine only has one hard disk - the one containing the OS. However, I might be able to create a partition in free space at the end of the hard disk to store the image (I might need some help with the Linux commands). Or perhaps the image file can be pulled via FTP.
I tried Acronis but was disappointed to find that it doesn't seem to allow me to overwrite the system partition (unlike the Windows version of Acronis, which is capable of doing this with a restart).
View 1 Replies
View Related
Nov 15, 2010
I have two laptops with me here at school, one bigger one [home computer], and one smaller one [netbook]. I take the smaller one with me to class and when I'm out and about, however, I keep all of my things on the bigger one. I would really like to be able to set up some sort of SSH port forwarding for the bigger machine so that, when I'm out and I realize I left file X on my home machine, or I want to listen to a certain song, or whatever, I can just scp it to the netbook. The issue is, at my dorm, I'm stuck behind a firewall and can't just set up a SSH daemon and port forward through the router, I need a more clever solution. I do have a home server (not with me at school), which I commonly use for transferring files. Basically, I'm wondering if there is some way I can SSH into my server box, with reverse port forwarding so that, when I am out and about, I can just log into my server and copy files from my home computer for use on my netbook. I've tried a couple of solutions which come up from google "reverse ssh" but haven't been able to get them to work. A step by step guide to doing this would be great. Again, the setup is:
Home server [ssh-able]
Home Computer [behind firewall, can't ssh into at the moment]
Netbook []
Want to be able to SSH from Netbook to Home computer, probably using Home server.
View 1 Replies
View Related
Jan 11, 2011
Just installed Ubuntu the newest release on my laptop . Im dual booting on my laptop. Vista or Ubuntu. I gotta say I love Ubuntu more than vista. I would much rather use ubuntu. My question is I cannot for the life of me connect to my main PC running Windows 7. Reason I want to do this is my PC running windows 7 has all my music which is rather large over 100gigs worth. Looks like it recognizes my PC but I cannot access anything.
Now In windows 7 I have disabled password and made it pretty easy to access files on there. When I boot into vista on my laptop no problem at all getting onto the network to access my main Windows 7 Pc. Any Ideas why Ubuntu can't get into my Windows 7 pc Through my network. Would love to do this that way I don't ever have to boot into vista. Ubuntu is great otherwise.
View 1 Replies
View Related
Aug 31, 2010
How can I run LAMP (Linux, Apache, MySQL, PHP) in a virtual machine (Ubuntu in virtual box) and make it so the web server is accessible locally (and ONLY locally) on the host OS via an ip address?
View 3 Replies
View Related
Aug 18, 2009
I have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
View 5 Replies
View Related
Oct 23, 2009
At school can connect to my computer via SMB/Samba and VNC from the Windows Machines, but not by hostname (I still cannot VNC in at home on my desktop computer and have yet to try Samba there because I wanna setup Samba there from the comfort of my laptop and therefore need VNC first). How come I cannot access this machine by it's hostname?
View 4 Replies
View Related
Nov 2, 2009
he moved in a new place and there is a huge share on the network machine which runs windows... however he has fedora 10 installed on a desktop pc with a big screen and asked me to configure it so it can access the share... i have almost no experience with fedora and i've been trying to do this for two days now... i installed the samba package, but now what? how to do this because the exact commands are unknown to me... i have the root password and everything else on the network... so i just need to know what ot write in order to be able to mount all the TBs of information on the server...
View 4 Replies
View Related
Jan 27, 2011
I have two desktop machines, each with U 10.10. I want to backup data on my main machine to a partition on the other machine. I am going to use luckybackup for that. Problem is, from the main machine, I cannot access the backup partition on the other machine (but I can see it). I get prompts for passwords and when I enter them nothing happens, it seems they're not valid. Bottom line, I can't access that partition.
View 7 Replies
View Related
Mar 10, 2011
Been using Ubuntu now almost 1 year and love it but I'm still mostly lost so I need someone to explain in great detail how to be able to access the My Documents folder on my LAN XP machine. I've been up and working fine for 6 or 8 months but all of the sudden (maybe it was an update package?) I get the following error message, after a long delay, when trying to access the shared folder:
Could not open location 'smb://office/my%20documents/'Failed to mount Windows share.I have set an icon on the top panel mapped to the XP machine and launched by launcher.
View 4 Replies
View Related
Jul 1, 2010
How do I do this at my modem page?
View 4 Replies
View Related
Jul 1, 2010
Anybody know how to do this, IN MY MODEM PAGE?This is the best I can copy my modem config page code...
View 2 Replies
View Related
Oct 7, 2010
I am able to access internet, can ping other machines and can ssh into other machines. But cannot be pinged (it just hangs), and when trying to ssh into machine, it also hangs (no response)I checked the sshd daemon, it is not runningchkconfig --add sshdreboot, the sshd does not seem to come up.
View 1 Replies
View Related
Jan 4, 2011
I am facing a problem which joining my linux machine to SAMBA Primary Domain Controller (Running on Centos 5). I am able to join Windows XP machine to the domain, but i have no idea how to do it on Linux Client.
View 1 Replies
View Related
