Im trying to setup a radius server to use WPA2-Enterprise on a linksys wireless router. I have so far done the following from this link: [URL]... Im having trouble understanding/finding information on how to configure the configuration files so my radius server will work when somebody tries to authenticate.
View 3 RepliesI'm try to setup a wireless network with my linksys wireless router and my HP laptop dual booting Vista & Suse 11.2. I have the vista networked, just fine. Where I can share files and the printer connected to my desktop. But I want to be able to use Suse in the same way, full time and to stray away from Vista. My wife and kids like easy. So I'm trying to transform them and show them something new.
View 9 Replies View RelatedWell this one is driving me nuts. I've been searching through the forums for a while and it seems that a number of folks have similar issues but the solutions used don't look like they apply to me. so without further ado here are the outputs typically requested:lspci
Code:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
[code]....
I'm using the new opensuse 11.4 with KDE desktop. I can connect to my WPA2 personal network fine, but some other networks, like a WPA2 enterprise network connects, but no Internet(pinging too) resolves.
View 2 Replies View RelatedI had some difficulty getting Plasmoid to work on to connect to a WPA2-Enterprise Network. The Cert file is in DER format which is something like this "XXXX.cer" After I filed a bug report I got a respond to try the updated Plasmoid from this Repo:
Index of /repositories/KDE:/UpdatedApps/openSUSE_11.4 To use it you have to first install your certificate in openssl using terminal. First copy the certificate into the ssl directory (In OpenSUSE it is /etc/ssl/certs/)
1) sudo cp path_to_file /etc/ssl/certs/Then install it (If you don't do this it will fail) Source:http://gagravarr.org/writing/openssl...tml#Installing
2)sudo ln -s filename_of_certificate `openssl x509 -hash -noout -in filename_of_certificate`.0
3)Then after that when using Plasmoid to connect check the box use system certificate.
It should work like it worked for me but I still think certificate handling needs a lot of improvement.Pointing the cert directly from plasmoid does not work.
I have just installed fedora 14 and would like to setup my linksys wag54g router in order for me to connect to the internet. I'm the newest newbie ti linux been spoiled rotten by the ease of installing stuff on win7. I need a step by step how to please as I am completely new to the command line as well. I have uploade the quick install guide for the router, but at this stage I dont know wether I should go ahead with what the install guide says or not as I dont know what works for linux.
View 3 Replies View RelatedI've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.
The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.
ping 192.168.1.1 (the router):
Code:
I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):
Code:
The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.
With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)
lsusb:
Code:
ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):
Code:
ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):
Code:
Code:
I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).
Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?
I have an Acer Aspire 1 Netbook - this is running UBUNTU- When I try to connect to my Linksys Router in wireless mode it asks for password - but doesnt accept. I can see the Linksys in network manager plus several other networks in the vicinity. My other wireless devices all connect O.K. to the Linksys, and accept my password.. I can hard wire by ethernet to the netbook. Just wireless is the problem
View 3 Replies View RelatedOn this Ubuntu 8.04.4 LTS server, I want to log the messages from a Linksys router. So I made this change to "/etc/init.d/sysklogd" SYSLOGD="-r" Then in "/etc/syslog.conf" I added the following to the top of the file: Code: if $fromhost isequal 'Linksys' then /var/log/Linksys.log & ~
Then I rebooted the server. But there is no "/var/log/Linksys.log" file.
i installed ubuntu 10.04 from internet.but i cant connect to my wireless router linksys wrh54g ver 1.0,but if i using Local area connection its working,however my wireless connection working in my other os win xp.
View 3 Replies View RelatedI have a Linksys WAG54G2 Router - this is set up and was working fine with Xp and my Apple I phone.I have just changed over from XP to Ubuntu, and am having difficulty in configuring wireless settings to accept UBUNTU.The hard wired Ethernet connection works fine.
View 2 Replies View RelatedI followed [URL]..to set up my wireless network with WPA2 encryption. It works now and knemo says:Encryption: active. However, "iwconfig wlan0" says Encrytion key: off:
Code:
wlan0 IEEE 802.11abgn ESSID:"blitz"
Mode:Managed Frequency:2.472 GHz Access Point: 00:25:9C:DE:D3:7D
Bit Rate=0 kb/s Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
[Code]...
So is there anything wrong with that "Encryption key: off" statement? I suspect that encryption key only applies to WEP, but not to WPA2 encryption, but I am not sure. So my question is, can I ignore that statement and assume that my encryption is fine?
Besides, where does knemo read the information about encryption from? As I mentioned, knemo detects that the encryption is active. Are there any other commands to make sure that my encryption is safe and well?
I'm having trouble getting my network set up the way that I want it/had it. You see, when I first set up my network, I just had my cable modem going directly to my standard wired router (A D-Link DI-604), which had DHCP,and was connected to all of the computers on my network. I had one switch hooked up to one of the ports of the router, but this was a regular switch, and it would not try to assign IP addresses, it would just pass through the DHCP info as I wanted.
Now however, my network setup has changed. My room mate and I both got laptops, and we decided that we wanted to have wireless access so we didn't have to constantly plug in to the router.
Now my network is set up like this: The modem is hooked up to the router(DI-604), which is hooked up on the LAN side to our computers, our switch (which is hooked up to 3 more computers), and to a wireless router card (A Gigabyte GN-BC01).
The wireless router card has two jacks for ethernet. One for WAN, and one for LAN. The LAN side we have plugged only into the computer in which the card is installed.
Now the problem is this: The wireless router card comes with DHCP by default, and it's assigning addresses to the laptops and to the computer hat it's in, and worse, the IP addresses are on a different subnet than that of the main dlink router. The Main (dlink) router assigns addresses from 192.168.0.1 (itself) to 192.168.0.254, while the wireless router card assigns addresses from 192.168.1.1 to 192.168.1.254 (itself).
Because of this, I cannot access services on the wireless network from my wired network or vice versa. The first thing I tried was setting the card to assign addresses from 192.168.0.12 to 192.168.0.253, however it just said "internal error" when I tried to do this. I decided that this may be because it sees that it was being assigned an address on it's WAN side on the same subnet. So the next thing I tried was disabling DHCP and setting the "LAN IP Address" to 192.168.0.12, hoping that the DHCP would just go through the card, like a switch. I would have set the LAN IP address to be assigned by DHCP, but this was not an option, so I decided that'd be the best thing to set it to.
Once again however, setting the LAN ip address to an address on the same subnet as that of the IP assigned to it's WAN side caused it to report an "internal error". I verified that this was the issue by setting the LAN address to several other private IP addresses to test (I.E. 10.0.0.1, 192.168.3.1, 192.168.5.12).
My question then really is: How do I set up both routers so that I can access services and computers from each network from the other network. Should I set them with different subnets and set the gateway on the wireless network to the main router? To the wireless router card? Should I put them on the same subnet? Will it know how to communicate?
Here is a link to (picture) my network diagram. Network Diagram
Im having a lot of trouble configuring freeradius for Ubuntu. I have freeradius installed but Im having trouble finding any information on how to edit the configuration files to create users and be able to WPA2 Enterprise. The wireless router that I am using is an Linksys WRT54gl.
View 2 Replies View RelatedIs it possible to set up a (Open)VPN server without havning the server behind a router (NAT)?
My ISP allows me to have multiple IP addresses (assigned by DHCP).
how to set this baby up with a working Internet connection so I can get on my PS3 across the other room.
View 1 Replies View RelatedI am planning to create a home router using my Linux laptop. Is it possible to secure the wireless router with WPA2, and how would I set that up?
View 2 Replies View RelatedWell I recentelly read some tutorials about "cracking" wep networks, and seems like it's kind of easy ( I Haven't tried'em out since I don't have my laptop right now, but i'll try them as soon as i get it back )So i'd like to change my network protocol to wpa2, but I REALLY GOT NO IDEA on how to do this.Does someone knows about a tutorial on how to do this?
View 5 Replies View RelatedI am dual booting XP and Ubuntu 10.10 64bit on a Dell Latitude E6410 and I have a Linksys WRT120N router connected to my Modem.
So the weird thing is, under XP I can use the internet while connected to my router. Under Ubuntu I can't use the internet while connected to my router. But I can use the internet in Ubuntu if I connect to my neighbor's router called "linksys". So something happens when I connect to my router that makes Ubuntu not able to access the internet. But if I'm connected to my Neighbors router or if I use XP while connected to my router I can use the internet.
I have been using Ubuntu for about a year, so I'm getting better but still a noob. I've tried to figure out what's going on by looking at other forums and posts and trying to see if anyone has solved this. So far I've had no luck. This is also the first of many problem I have encountered that I have been unable to solve using online posts, and is the first problem that I have had to resorted to creating a post to try and fix.
I am net to this whole Linux thing. I cant seem to connect to my Linksys router. Not sure if I have to call Linksys or what.Mine is a WRT54GS
View 1 Replies View RelatedI have been using the B version for many years, just got the G version for a B-day gift. I run OpenSuSE 11.3 and XP on one computer but I have several (3) wireless laptops in my house plus a xbox wireless. I also have 2 other ethernet computers connected to the B version. Can someone provide me with some links/info on how-to. When I did a Google search all I came up with is firmware upgrade...which I've done for the B version. Is it as easy as taking out the old...configuring the new?
View 5 Replies View RelatedI set up my linksys router for PPPoE and username, however, if the compter goes idle after a while, I have to go back into the configuration page, save settings and everything is ok. I would like to keep the connection alive 24/7. There are two settings:
time to live (max idle time)
redial
Max idle time is now set at 10 minutes. The redial is grayed out. Are these the settings I should be concerned about?
Okay, a few days ago I got a small job setting up a router for a neighbour of mine. He wanted me to set up a wireless network for him. The router he bought is a Linksys Wireless N-Router E1000. I set it up the passwords and everything. Only to find out that I couldn't connect at all to it. The main computer with a direct ethernet connection to the router was the only one that had internet. Everytime I attempt to connect wirelessly with any device, it will take extremely long time to connect, to the point where I will just quit connecting.(Example: 15 minutes of waiting, when the laptop is right next to the router)
Any ideas about what I am doing wrong here? As far as I can think of it might just be a faulty router, because the router will not implement any changes(like setting a password) I set on it. Only wired connections seem to work. the router is called a linksys wirless N-router E1000.
I am trying to install ubuntu on an HP Pavillion dv7 laptop. The installation worked just fine. However, I cannot connect to our Linksys router wirelessly.
View 3 Replies View Relatedi have a project from my boss to make radius server on fedora 13 i 686. can u tell the step by step how to build radius server on fedora 13???? thx u for sharing
View 3 Replies View RelatedServer details:
OS: Linux RedHat
DHCP: Static IP set to 192.168.1.101
sshd_config: Enabled for port 22 for ssh
Connected through wire to the Linksys router
Router:
Type: Linksys BEFW11S4
Port forwarding enabled for port 22 to IP 192.168.1.101
Client:
Windows 7
Interface: PuTTy
Host: 192.168.1.101 on port 22 through SSH
This always gives an error "connection timed out". SSH directly on the local Linux works fine.. Seems basic but had been struggling over this for past 3 hours to no avail so thought of posting it to the experts.
i Cannot access Server behind the linksys router via ssh
Server details:
OS: Linux RedHat
DHCP: Static IP set to 192.168.1.101
[code]...
Is there a way to configure the Linksys router via my browser (like I do with a 2WIRE router) and if so, how? (the 2WIRE I just typed gateway in the address bar).
View 1 Replies View RelatedI have a linksys router in my basement and physical access is pretty much blocked by a stuck trap-door. I could try to shut off the main power switch, but I like to see that as a last resort. The problem I have is that I have an open (no encryption) wifi connection between my pc and linksys router, yet I cannot connect to it. Until a couple of days ago I could connect to it with my android handheld device, my linux laptop, and my windows desktop. All these devices are now unable to connect. I attached the wicd log from my linux laptop. How to gain access to my router again?
View 9 Replies View RelatedMy son lost his USB Wireless stick for his Computer. I had thought I heard that if you had a second wireless router, you could use it somehow to detect the wireless router you have already set up in your home (like using a wireless card)? Is this what Ad-Hoc is? Either way, can this be done and if so how? I use a WRT54Gx2 Lynksys router and have a TRENDNET TEW-432BRP wireless router and also a spare D-link DI-514. I use ubuntu 10.04, and also wanted to know if I connected one of the router to his on the LAn port could he connect msaybe through an Ad-Hoc on my local computer here? He uses XP on his. I'm a newbie to linux and networking in general.
View 2 Replies View Related