Networking :: Set Up A Pxe Server In Fedora 13?
Oct 29, 2010I'd need help understanding how to setup a pxe server.
From what I have read I need dhcp tftp and nfs but how to set these up is where i'm lost so if someone can clear up my confusion?
ADVERTISEMENT
Fedora Networking :: Specifying DNS Server Address
Aug 3, 2009I have specified Primary DNS address in Network Manager's DNS tab and saved those settings. But when I restart my PC, Primary DNS address will go blank. How can I save this address premanently?
View 6 Replies View RelatedFedora Networking :: Port To Allow For NFS On Server?
Jan 4, 2010What port needs to be allowed/opened on the server side to allow Fedora 12 to access files on the server via NFS? My email and internet through the server work fine, but NFS file sharing/browsing does not work and I'm not having luck with forum and google searches finding what needs to be changed.
Fedora 12KDE, 32bit, install from liveCD, fully updated as of this date.
Fedora Networking :: Can't Connect To The Server?
Mar 7, 2010i want to share my problem that after updating fedora 12 by my mobile broadband. mobile broadband connection stopped working. i mean now it can't connect to the server.
View 1 Replies View RelatedNetworking :: How To Install SVN Server In Fedora?
May 20, 2009How to install SVN server in Fedora. And how can i configure it with apache service. That is manage svn server using HTTP. How to test from a client machine.Kindly help me out. Im new to linux platform.MUser are into LAN connectivity in Location B server. wheras this server shud act as a proxy server and update the database to the Location A server.
View 1 Replies View RelatedFedora Networking :: LTSP - NFS Server Not Responding?
Feb 12, 2009Currently have a problem with my LTSP server when using a gigabit switch with a megabit thin client.I am using K12LTSP with Fedora 9.The thin clients get most of the way through booting up then I get error messages saying:nfs: server 172.31.6.1 not responding, still trying.I don't get this problem if I use a 100 meg switch though.I have found several forum posts on the internet which all seem to point to the following webpage with a solution:However, when I make the recommended changes It doesnt make a difference.Below is an example of the default file located at /var/lib/tftpboot/ltsp/i386/pxelinux.cfg with its default settings:
Code:
prompt 0
label linux
[code]....
Fedora Networking :: Two Internet Connections On F10 Server?
Feb 25, 2009I have a question, regarding the use of two internet connection on the same server. So, the thing is like this: The server will have 3 network adapters: connected to a DSL modem (on this adapter I have one of the internet connections, a PPPoE connection. It's only purpose is to share the internet connection to all LAN users using SNAT.
eth1 ----> the other internet connection, a much more expensive one actually, used for hosting a website, a domain name server, and a qmail server. eth2 ----> LAN connection So what I want is to make eth1 the "default gateway" (for outgoing mail, DNS requests, etc) and, as I said, use the ppp0 connection on eth0 only for internet sharing in LAN.
My question is (since I'l configure this server in about one week), does anybody have any suggestions regarding how could I accomplish this? I mean, I'm affraid that ppp0 will also try to use the default gateway from the other internet connection and vice-versa. Now, I know I can use the ip route/ip rule commands, but for many reasons I'd like to keep it simple and not use them.
Fedora Networking :: Can't View The Server On Other Terminal
Jun 11, 2009Here is my problem, which I think also posted here already but cant find enough solution. I successfully access the web server to its localhost using its IP address (Sample: http://192.168.1.100/index.php), but when I try to access it on other terminal which are also connected to the same network, I cant view it. But it seems that they can both communicate to each other when I ping it respectively both sides.
how can i set something to view the page outside the local server.
Fedora Networking :: F10 As Server And Clients Are WinXP
Jun 21, 2009I'm setting up a network for a school. The network has 11 client computers (windows xp) and a server (fedora 10) All I need to do is have a share for all the children to use. (this I did by adding each client to the workgroup specified on samba then I just map the drive). The issue turns out to be that I have over 300 users. The users don't always use the same computer therefore I need the users to be registered on all 11 clients. How can I do this? I have been searching and I've not gotten anywhere. How can I add the computers to a domain instead of a workgroup? What can I use?
View 1 Replies View RelatedFedora Networking :: Connecting To Server With Netcat
Jul 10, 2009I connected two machines, I have their given of the addresses ip in a static way and not with DHCP. I gave to the machine server the address: 192.168.0.1, and in the machine client the address 192.168.0.2.
View 5 Replies View RelatedFedora Networking :: F11 - Cannot Find Server Settings?
Aug 16, 2009Although I just installed F11, it's been out a while. Anyway, I went to System -> Administration expecting to find Server Settings. It wasn't there! That had been the way to set up NFS for file sharing on my local network.
View 4 Replies View RelatedFedora Networking :: Setting Up NFS Server On Host?
Sep 5, 2009I am trying to set up a nfs server on my Fedora 11 host machine so that my virtual machines on the same host can access files on the host.The ip address of my host machine is 192.168.1.132The ip address of my virtual machine is 192.168.122.180I can ping successfully from host to virtual machine and vice versa.On the host machine, I have the following :1) Edited /etc/exports to add this one line./home/stardust496/files 192.168.122.180(rw,nohide)2) service rpcbind restart3) service nfs startOn the irtual machine, I do the following:1) mkdir /mnt/files2) mount 192.168.1.132:/home/startdust496/files /mnt/filesBut the mount call does not succeed. (It hangs for a while and then returns saying that it did not succeed)
View 3 Replies View RelatedFedora Networking :: Replace Windows Xp Server
Jan 8, 2010We have 9 windows stations on XP and also Xp on the server to do file sharing. Now the boss wants a domain environment and has asked me to look at Fedora So what we want is filesharing, like word .xls ,pdf docs etc Also we want to restrict what the user workstations can do.We want to their profiles on the server, so when they login in all profile information like the desktop, my documents loads.If one PC for some reason gives in ,they can login on another and continue working.
View 2 Replies View RelatedFedora Networking :: Create A Proxy Server On A F10/F11/F12?
Mar 9, 2010I'm a network administrator and I have to cut the internet access to some network users. I would like to do that by installing a proxy server on a F10/F11/F12.
View 5 Replies View RelatedFedora Networking :: PPTP Server Set Up But Can't Connect?
May 8, 2010I've got a FC PPTP server up and running but can't connect to it using VPN. I'm using NetworkManager but the connection fails each time. On the server, I'm seeing the following in the /var/log/messages:
Quote:
May 8 16:37:05 li99-23 pppd[2113]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so is for pppd version 2.4.3, this is 2.4.4
May 8 16:37:05 li99-23 pptpd[2112]: GRE: read(fd=6,buffer=8059780,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs
[Code].....
Ive checked that the name,passwords all match, which they do. Has anybody seen this before ?
Fedora Networking :: Connect To A L2TP VPN Server?
May 17, 2010I recently wanted to connect to a vpn server which its tunnelling mode is L2TP.how I can configure my FC 12 to connect to this vpn server?I mean in which files I should enter that server's IP and my username and password.
View 3 Replies View RelatedFedora Networking :: Samba Server Not Working On F13?
Jun 20, 2010I can't get the samba server to work on a Fedora 13 system. First of all, I've activated the "smb" service. After this, since I couldn't find any samba configuration tool in Gnome, I switched to KDE and launched Menu - Computer - System Settings - Advanced - Samba. I typed in my workgroup and netbios name and added a share (2nd tab). Then I added my user name to the blank list "samba users" (4th tab), which wasn't very effective, because this list is blank again when I leave (OK) and reopen this config tool.
From a windows machine, I can't access this Fedora system. Netbios doesn't work (ping netbios name - ...could not find name...) and trying \IP in the explorer shows an error message "Windows cannot find...".
Btw firewall and Selinux are both deactivated.
When I open Dolphin on the Fedora locally and type "smb://localhost" it *does* show a logn window, but no matter what I type in there, it just shows this login windows again after clicking OK.
Fedora Networking :: Regarding Video Streaming Server
Apr 19, 2011i am doing a project based on the linux OS in this i want to implement a streaming server to create the traffic i dont know about these thing so can you let me know is there any servers available if so could you explain step by step installation of server and client.i am using fedora 13 linux
View 2 Replies View RelatedFedora Networking :: OpenVPN Server Configuration On F14
Jun 16, 2011I have (seemingly regretfully) finally upgraded my Fedora Core 7 linux machine that has served me so well for the past decade. One of the final pieces to put in place was my Openvpn config (which was running flawlessly on my FC7) which I cannot get to work.
Here are my steps.
1. Disabled SELinux
2. Added the following entry in my iptables: (although I've stopped iptables to help troubleshoot)
-A INPUT -i tap0 -j ACCEPT
-A INPUT -i br0 -j ACCEPT
-A FORWARD -i br0 -j ACCEPT
3. Yum installed openvpn and bridge-utils (btw I'm using bridging)
4. Configured my bridge-start script as such:
#!/bin/bash
# Set up Ethernet bridge on Linux
# Requires: bridge-utils
# Define Bridge Interface
br="br0" .....
5. Configured my openvpn server conf as such:
proto tcp-server
port 5990
dev tap0 .....
When I execute my bridge-start script it creates the br0 and tap0 then all connectivity vanishes (I can only ping my gateway 10.0.0.50) - internet and any other addresses time out.
Fedora Networking :: Installing Box As DHCP Server?
Jun 19, 2011We have a network of 20 boxes and the router dealt with DHCP, but I'm planning to assign the DHCP task to the linux box. Any heads up? eth card configuration, network topology... etc.?
View 8 Replies View RelatedFedora Networking :: DNS Queries - Connect To A Ssh Server ?
Aug 28, 2011How often are dns queries sent? Assume I want to connect to a ssh server, will I send one dns-query in order to do that or do I send multiple during my connection? What if I request web-pages, do I send a query only when I enter a site or will I send queries every time I visit a new page on that site?
I'm asking since I'm considering getting an account at dyn.com (the standard account for $30/yr) and it comes with 600 000 queries per month (which is way more than I expect to get but knowing exactly what it means is always good).
Networking :: Connecting Mac Book To Fedora Server?
May 9, 2011We have a mac book connected to our network. It can surf the web and even get into our network files. However, these network files are on linux, and finding the open files (not password protected) is fine. But we need the mac book to get into the protected files to edit our media. When we connect to the linux server, there is a pop-up asking for a login. We enter the correct credentials that work for everyone else to get into our protected files, but these credentials don't work... There is a message that pops up: "This operation cannot be completed because the original file '<file_name_here>' cannot be found." But it found the other open files...? what do we do to get this to work? The macbook is 'os x' and the linux server is 'fedora 10'
View 1 Replies View RelatedFedora Networking :: Connecting To Server - Cannot Display Location SMB
Feb 15, 2009In fedora 10 I want to browse the share files in our windows network. When I want to use 'connect to server' with user name and password. It says:
"Cannot display location smb://servername/"
"No application is registered as handling this file".
Fedora Networking :: Controlling A Running X Server Remotely?
Apr 11, 2009*Solved* I have been reading the following guide on how to use the VNC programs and a GUI to connect to my main machine from my laptop via my LAN and router:
[URL]
This allows me to control the server remotely, and run applications on the server remotely, with the GUI output being shown on my laptop, which is really neat I had Eclipse + PDT running on my server and had to stop it and start a new instance remotely from the laptop via VNC viewer, as Eclipse said the workspace I wanted to use was already in use.
So starting the VNC server on the main machine does not allow me to access the programs that are already running on the main machine under the native X server. However I can now do PHP debugging remotely using Eclipse + PDT now, and all the PHP source code is on the server machine. That's OK, but I would like to do more than that. I want to be able to connect to the native X server on my main machine, and control all the applications running on the main machine remotely from my laptop, without having to shut them down and restart them again via a VNC viewer.
Is there some sort of remote control program I can use to allow me to connect to the running X server on my main machine from my laptop, and control those applications remotely please, so the desktop layout on the main machine's screen is mirrored on the laptop screen?
Fedora Networking :: Scripts To Automated FTP Login To More 20 Server
Apr 22, 2009How do I make a scripts to automated login ftp to more 20 server at one time? From fedora to ftp X 20 linux server.
View 2 Replies View RelatedFedora Networking :: Vnc Server Test Ok But Cannot Connect Remotely?
Jun 3, 2009I succeeded in setting up a vnc server on a fedpra9 tested it locally and it was successfully connected but no connection done from other machine in the network , even though they can see each othervnc server is pingable se linux is disabled
View 9 Replies View RelatedFedora Networking :: Get A Server Not Found Error Message?
Jul 11, 2009I installed fedora 11 and configured xdsl(pppoe). I then performed an upgrade and installed some apps. Internet still worked before the restart.After that even though i could activate the device, i cannot view websites. I get a server not found error message. I have tried using both firefox and konqueror. Internet works in windowsIs this due to the upgrade? If so which upgrade would have caused the error?How do i resolve it
View 4 Replies View RelatedFedora Networking :: Primary DNS Server Gets Deleted After Restart?
Aug 12, 2009I have been using Fedora since almost 1 week by now, and I'm really impressed by its features but there is one very small problem that I face everyday.At the first place, I had setup a profile settings for Network so all my static IP, Hosts, DNS servers were all configured in that profile.Now I had filled in something in the Primary DNS Server and then I had saved it. The internet works after that but when I reboot, that Primary DNS server gets deleted. I have to type it all the time and then click on save and then start using the internet again.
View 1 Replies View RelatedFedora Networking :: Accessing VPN And Terminal Server At Work
Aug 20, 2009Loving my new Fedora system and the steady march towards making a MS free house but I have a problem. I need to be able to connect to my company server via VPN and then initiate a terminal server connection. Two clicks on XP but I have no idea what to use now. As soon as I have this down I can remove my XP partition forever as I have everything else I need daily working like a charm.
View 3 Replies View RelatedFedora Networking :: Samba Server Name Disappears After Restart?
Sep 10, 2009I have a problem with samba machine disappearing after I restart smb or the server where samba is running. Lets say I name my samba server ABC and set it up via system-config-samba utils. I follow basic steps and fill out everything according to most guides that are available for fedora. After that everything works great, I can connect to samba server ABC form any machine through smb://ABC (mac) or \ABC (win), however as soon as I restart smb services or my server (subsequently restarting the smb service ...) I no longer can connect to it via samba server name ABC, I can only do smb://SambaServerIP or \SambaServerIP (have to put numerical internal ip to connect)
My smb.conf:
# cat /etc/samba/smb.conf
[global]
[code]....