Fedora Networking :: Specifying DNS Server Address

Aug 3, 2009

I have specified Primary DNS address in Network Manager's DNS tab and saved those settings. But when I restart my PC, Primary DNS address will go blank. How can I save this address premanently?

View 6 Replies


ADVERTISEMENT

Fedora Networking :: No IP Address From DHCP Server On Wireless Network?

Feb 12, 2009

I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.

I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.

View 14 Replies View Related

Fedora Networking :: Wireless - Shows Up In The Network Manager - Does Not Get An Ip Address From DHCP Server

May 24, 2010

I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.

However it does not get an ip address from the DHCP server. Below is what I get in the messages log:

View 1 Replies View Related

Networking :: Networking Routing \ Use The Terminal To Assign Server Eth0 A Proper IP Address?

Jun 8, 2010

i know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 192.168.1.6 this connects to the router that has internet access.eth0 i intend to have the following settingsip:192.168.0.1sub: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: 192.168.0.100sub: 255.255.255.0gateway 192.168.0.1i have then set the router IP for LAN handling as 192.168.27.1 and all ethernet connections will have a 192.168.27.x IP.

so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through

View 1 Replies View Related

Networking :: Run A Server And Want To Get IP Address

May 25, 2011

I'm trying to run a server, and want to get my IP address but when I run ifconfig, it shows my inet address as 10.0.1.9/10.0.1.4 which, if I recall correctly, is an internal address... my friends can't connect to the server on those ip addresses. My box is wired to the internet, no router, so there's no firewall or router that could be stopping it. Am I doing something wrong with a command, (reading wrong number, etc), or is it a system problem?

View 3 Replies View Related

Networking :: Re Routing IP Address - Without Having To Make Changes On The DNS Server

Feb 9, 2010

I have the following setup:

Location A:
Internet -> ISP 1 -> Firewall 1 (external IP address) -> Web Server 1 (internal IP address)
Location B:
Internet -> ISP 1 -> ISP 2 -> Firewall 2 (external IP address) -> Web Server 2 (internal IP address)

I want to find out if I can failover to another location without having to make changes on the DNS server. Just by redirecting traffic from ISP 1 router to ISP 2 router.

View 1 Replies View Related

Ubuntu Networking :: Use DNS Server For Clients To Work With Any Address

Dec 15, 2010

On my server I've a OpenVPN gateway and a DNS bind9 serveur At the moment, OpenVPN send opendns address to the clients and it works fine. I would like to use my DNS server for my clients to work with any DNS address. Here is OpenVPN config :

[Code].....

View 1 Replies View Related

Networking :: DHCP Server - Losing Static IP Address

Nov 10, 2010

I have an Ubuntu Server 10.04.1 that I have given a static IP address. Every six hours or so I will lose connectivity to it and when I type ifconfig to look at the network information, it has been given an address via dhcp. If I run the /etc/init.d/networking restart command the IP address goes back to my static address and things are fine for another 6 hours or so. Here is what is in my interfaces file:

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 10.60.82.15
netmask 255.255.0.0
broadcast 10.60.255.255
gateway 10.60.254.254

This machine is also a DHCP server and I checked to make sure there are no other DHCP servers on my network. Right now my fix is to have a Cron job running that runs the reset command every 5 hours, but I would like to find a more permanent solution.

View 8 Replies View Related

Networking :: Windows Cannot Find IP Address Of Samba Server

Jan 26, 2011

We are running samba on a Fedora release 8 (werewolf). The samba server is located on a dmz subnet off of my Cisco ASA 5510 firewall. From my inside network I have no problems connecting to the samba shares. However when someone uses a VPN connection they cannot connect to the samba share. VPN users are assigned an address from a pool which has no problems getting to the dmz based samba server. All ports required are open on both firewalls (Samba server and PC with VPN connection.) I consistently get an error saying Windows cannot find the ip address of the samba server. I have looked at the samba logs in varlogssamba and found a complete list of connection attempts listed by ip address. These addresses match the pool addresses that are being assigned by the firewall when someone tries to connect using the vpn.

Each entry has this:
lib/access.c:check_access(327)
connection denied from (ip address that is assigned by firewall)
smdb/process.crocess_smb(1062)
connection denied from (ip address that is assigned by firewall)
I checked the smb.conf to make sure the subnet the pool addreses is listed in the global section. It is.

View 7 Replies View Related

CentOS 5 Networking :: DGE-530T Will Not Get IP Address From DHCP Server

Aug 6, 2009

I am attempting to get this network card running under CentOS 5.2 but have had no luck. Some sites say to use the sk98lin driver, others the skge, which I can't find at all. I have tried multiple versions of the driver in rpm but none seem to work. The card shows under the network manager but will not get an IP address from the DHCP server.

Here are the outputs for this card.
uname -rmi
2.6.18-92.1.10.el5 x86_64 x86_64
lspci -m
04:01.0 "Ethernet controller" "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)" -r11 "D-Link System Inc" "DGE-530T Gigabit Ethernet Adapter (rev 11)"
lspci -n | grep "$(/sbin/lspci | awk '/net/ { print $1 }')"
04:01.0 0200: 1186:4b01 (rev 11)
lspci -vv
04:01.0 Ethernet controller: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11) (rev 11)
Subsystem: D-Link System Inc DGE-530T Gigabit Ethernet Adapter (rev 11)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 121
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data

How to get this working as we have 3 of these cards for computers without a Gb NIC and I don't want to fight with it 3 separate times.

View 2 Replies View Related

Server :: Blocking Dhcpd Address Lease For Specific MAC Address?

Sep 4, 2009

I hv Cent OS 5.3 installed as server. I hv a network of approx 100 desktops and laptops. For a security purpose i want to block certain laptops from gaining a the network access using dhcp. Can we block the ip address leasing if a specific MAC address request for a ip lease?

View 7 Replies View Related

Server :: IP Address In Ubuntu \ Dont Find Inet Address?

Aug 4, 2011

If I give "ifconfig" in my laptop I get eth0,lo,wlan0.In that where do I find my Ip address in Ubuntu in 10.04. In eth0 I dont find inet address.Where can I find it?

View 2 Replies View Related

Ubuntu Networking :: Make Home Server Use A Static Ip Address?

Mar 15, 2010

i have followed multiple guides to make my home server use a static ip address. no matter what i do it always reverts back to its dhcp address after about 2 minutes. how do i get the static ip address to stick, or be permanant.

View 9 Replies View Related

Ubuntu Networking :: Make Server Accessible With A DHCP Address?

Nov 1, 2010

The cable internet I'm using runs on Dynamic DHCP IP addresses. I changed it to a static IP address in my router settings, but it keeps changing. This means that I can't connect to my home server from a remote location.

Is there anyway to run my ubuntu server on a DHCP IP address without connecting through my router 192.168.1.xxx?

View 1 Replies View Related

Networking :: Change MAC Address & Connect To A Dhcp Server Successfully

Dec 26, 2009

For changing the the mac address of my lan card( eth0) in linux fedora 9(solphur) i used this command

And i could change my mac address successfully but now i couldn't connect to my network via a dhcp server ( in configuration section of my router im going to check my new mac address (because i want to spoof) ,how i can do that?

View 7 Replies View Related

Networking :: DHCP3 Server - Setting Double Range Of IP Address

Apr 27, 2010

I would like to set a double range of IP address with my DHCP3-server. Now, I have eth0 (which is my only network card) with this IP address : 172.16.93.1 and I have created a second interface eth0:1 with this address: 192.168.3.1. The goal is to give an IP address 172.16.93.X to phones (with option 66) and the IP address 192.168.3.X to the computers.

This is my DHCPD.conf :
ddns-update-style none;
option domain-name "mycompany.com";
option domain-name-servers 172.16.93.1;
default-lease-time 3600;
max-lease-time 2347200;
authoritative;
log-facility local7;
option ip-forwarding off;
default-lease-time 20;
max-lease-time 20; .....

Right now my DHCP server work fine, (I means, no error at the startup ) but the server give always the same kind of IP address, whatever if it's a phone or a computer. I notice something "wired", if I put the :
subnet 192.168.3.0 netmask 255.255.255.0 {
range 192.168.3.100 192.168.3.199;
option routers 192.168.3.254; }
(Which is first in the dhcpd.conf) after the "subnet 172.16.93.0 netmask 255.255.255.0", the server will give IP address 172.16.93.X at all the clients. Is it possible to give more than one IP range with one network card at the same time? And how set the option 66 to only give IP address (172.16.93.X) to the phones?

View 4 Replies View Related

Networking :: Configure To Resolve For Hostnames When An IP Address Is Provided To DNS Server

May 21, 2010

How do we configure to resolve for hostnames when an IP address is provided to the DNS server.

Things I tried

The DNS daemon was started by the resolution failed. Find the logs below

** server can't find 11.127.168.192.in-addr.arpa: NXDOMAIN

View 4 Replies View Related

Networking :: Unwanted Blocking Ip Address And Session Log Out In Ubuntu 10.04 Server

Jun 29, 2011

I have UBUNTU server 10.04 LTS with 3 NIC "eth0" local and eth1,2 as internet connection and it acts as firewall, http proxy and samba file server ,I installed Zentyal panel manager for my server for easier management I did not configure any specific rule for my firewall but I have some problem with my clients who wants to connect to my server as gateway or as file server even my self experienced these problems too. these problems are as follow:

1. some time for a few minutes (maximum 10 minutes) my server block some of my clients to access it or internet but just for minutes but it is very annoying.
2. all of my clients those who login to an https servers or login to their mail or those who has some software like team viewer say that they are logging out from their session randomly I mean some of them logging out from their mail(yahoomail or googlemail ) or disconnecting from teamviewer connection or as I saw team viewer disconnecting for a few seconds and then comes back again. but I did not set any thing in my firewall or other services. this is my complete iptable rules:

View 9 Replies View Related

Ubuntu :: Give Server A Actual Address And Not Ip Address?

Mar 15, 2011

i am pretty much brand new to ubuntu i have messed around with it a little and have gotten my apache2 server up and running what i have some questions on is

1. How can i give my server a actual address and not my ip address?

2. Is there any way i can put like forum software on part of it? if so how?

3. What is the best way to write web pages i know some html so thats how i was able to write what i have now just wondering what best way is

View 1 Replies View Related

Server :: Binding Of IP Address To Its Mac Address In Squid Proxy?

Jun 3, 2009

I want to know how to bind Ip addresses to its mac addresses in Squid Proxy

View 5 Replies View Related

Server :: Dhcpd To Give A Certain Ip Address Based On Mac Address?

Nov 24, 2010

Im trying to setup dhcpd to put certain systems witch have mac address starting with 08:00:* in a certain ip class. How can this be done?So any system with mac address starting with 08:00 to get an ip from this range 192.168.12.2-192.168.12.99.

View 11 Replies View Related

Fedora :: Get An IP Address From The Dhcp Server?

Apr 13, 2011

I have a network with one of the server machine being under Fedora 14 and the clients machines being under Windows 7 and Fedora 14.

Quite often I get some difficulties for the clients to get an IP address from the dhcp server. If I look at the server logs, it looks like the server sees the requests and sends and answer:

Apr 12 19:33:18 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:18 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1
Apr 12 19:33:23 dhcpd: DHCPOFFER on 192.168.28.52 to 00:21:70:c5:22:4e via eth1
Apr 12 19:33:33 dhcpd: DHCPDISCOVER from 00:21:70:c5:22:4e via eth1

[Code].....

View 8 Replies View Related

Ubuntu Networking :: Set A Static IP Address On A Server (to Be Used With Mythtv) And Is Running Mythbuntu 10.04

Aug 12, 2010

Am attempting to set a static IP address on a server (to be used with Mythtv) and is running mythbuntu 10.04 (apologies if this is the wrong place to post this). I can set a static IP address that is in the range of 192.168.1.x on other machines on the network but when I try with the server it is not able to connect to the network. When using the DHCP rather than manually assigning the address it is assigned an address with the 10.0.0.x range. Why is it doing this I have never have this problem on other ubuntu boxes (and this one prior to a format of the OS).

The router/gateway is 192.168.1.1 I did have a DHCP server on the mythbox before formatting it and I was able to assign a static 192.168 address and retain internet connectivity. But I have re-enabled the DHCP server on my router since formatting the box.

View 1 Replies View Related

Ubuntu Networking :: DNS - Clients Unable To Properly Resolve The Server's Ip Address

Oct 4, 2010

I'm having really weird and frustrating DNS issues with my clients unable to properly resolve the server's ip address. They can resolve each other's, and outside systems, but not the server - at least, not correctly, and not all the time.

I have one Ubuntu server set up that does both DHCP and DNS serving to the Windows systems. The server has DNS forwarding turned on to forward to OpenDNS's servers (I've tried using my ISP's dns servers but the problem remains).
The server is *not* set up as a firewall; I am actually using a DLink router for that, and the Dlink is *not* set up to serve up DHCP nor DNS.

What I am getting is that my clients - and there are nothing but Windows clients - will not resolve the name of the server. For example, if I do: ping linuxserver

I get back a false IP address of 192.168.0.64 (and I've seen once a 192.168.2.49).

If, however, I put a dot in there: ping linuxserver.

I get back the *correct* IP address of 192.168.0.2, and thereafter, ping'ng linuxserver without the dot will work. Until the dns cache expires, either naturally or with ipconfig /flushdns on the windows clients.

The client *are* getting valid dhcp leases and can resolve everything happy-happy, they just will not get the proper address of the server 100% of the time.

View 4 Replies View Related

Ubuntu Networking :: Dhcp3-server Is Not Committing Correct Dns-address To Win XP Client?

Oct 15, 2010

I'm troubling setting up my dhcp3-server.Although I've configured "option domain-name-servers 192.168.1.1" in my dhcpd.conf my windows-xp-clients dns-server address is set to 192.186.1.1.This is strange! All other things seem to work correctly.This is my dhcpd.conf:

Code:
ddns-updates on;
ddns-update-style interim;

[code].....

View 3 Replies View Related

Ubuntu Networking :: Port Forwarding From Public Address To Private Address?

Feb 24, 2010

Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).

I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.

View 5 Replies View Related

Networking :: Error Str2addr:Address 35 Outside Range Of Address Field Length 1?

May 12, 2011

I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :

Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....

View 1 Replies View Related

Networking :: Program To Assign Globa LIPv6 Address And Bind() To The Previously Assigned Address?

Apr 24, 2010

Consider the following program:

Code:
#include <stdio.h>
#include <stdint.h>

[code]...

View 2 Replies View Related

Fedora Servers :: DNS For Web Server - Gets Replaced With The IP Address

Sep 26, 2009

I have installed Fedora 11 and I have set it up as a web server with Apache. I have a domain name from GoDaddy that I own and I have set it to my web server. I am able to type the address into a browser on a computer outside of my network and it will pull up the web pages on the server. the problem that I am having is that after I type the URL, it gets replaced with the IP address. [URL] I know that I need a nameserver to resolve the IP address but I can not figure out how to do it. I have tried to use Bind but I can never seem to get it to work.

View 3 Replies View Related

Ubuntu Networking :: Static IP Address And The Install Configures For A DHCP Configured Address - Network Not Starting

Dec 16, 2010

Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.

So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.

My files are as follows:

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved