Am attempting to setup an NFS partition for use by a number of users. I would with to use quotas to ensure equitable use of the HDDs resources. However, I keep getting the following error:
[Code]...
I have a configuration file for a network device(2100 lines). This device is configurable only over console line. If I copy chunks of those lines into terminal(I use minicom), there will be mistakes (sometimes some characters missing, space characters added etc). Hardware flow control and software flow control doesn't help either. I tried with cu utility, but same issues appeared. There will be mistakes even if I copy in ~100 line parts. What causes those missing/added characters? How to avoid those?
View 9 Replies View RelatedDoes anyone know of any decent web guides that will help me set up a DNS service running on 127.0.0.1 that will automatically forward requests like [url] to httpd running on 127.0.0.1 yet forwards requests to [url]to a 'proper' DNS service?
View 5 Replies View RelatedI have recently purchased dedicated box for game servers, I just wanted to install bandwidth monitoring software, however I have read comments regarding it as it uses lot of CPU resources. There is another method to monitor bandwidth using iptables. But that article is too complex for me: [URL]. I just want to check my overall bandwidth not from any particular ports. Any teaching commands to do that, as my new to Fedora. I use ssh to control my server.
View 6 Replies View RelatedI have OpenVPN running successfully on a CentOS Linux server. All remote clients connect without a problem and can ping the server LAN (10.5.0.0/24) . The server address is
10.5.0.1. All network shares on the server are available to the remote clients via SAMBA shares and this works well.The problem is that I am unable to get the remote clients to access services on the LAN clients. For example, there is a webserver running on a Windows XP PC (on the server LAN @ 10.5.0.2) with no firewall enabled. The remote VPN clients can ping this webserver at 10.5.0.2, but cannot browse the webserver at [URL]. All clients on the server LAN can however browse the webserver. The remote clients are using Windows XP and VISTA with OpenVPN 2.1.1.
I am new to VPNs and networking, but from my research, it seems as if this may be a routing issue. I would appreciate any help you may give in getting the remote clients to access the services on the LAN clients (other than the server @ 10.5.0.1).
The server configuration is:
local 192.168.10.6
port 1194
proto tcp
[code]...
I have a simple set-up with just one public share on my configuration file. How can I restrict its size?
View 2 Replies View RelatedI have 2 HD , one is 250 and other 80 GB
First I Installed redhat by making partitions on 250 GB...first few days everything was fine but later when i started pc it says this error.. i googled it and that might be bad sector prob...i guess thats why i installed REDHAT on 80GB which is in good state but in this harddisk again i encountered same problem when i boot it , it says above error and hangs..But if i try to boot it from CD then everything works fine.might be the problem please help me...
I wanted to know if it's posible to import filesystem quotas. And if so, how can I do it? I recently migrated a server, and presently the users don't have any quota limitations.
View 3 Replies View RelatedHow can i create quota for specified user : mr.X for any specified partition. I have 10 partition, and give mr. X access for only 2 partition and give him different quotas: says 800MB on sda13 and 3GB on sda14.
View 2 Replies View RelatedI have installed CentOS 5.5 on a computational cluster and want to limit the disk space used per user to 10GB. I do not know what is the relation between blocks and the the volume i want (10GB). What is the values I should used in the file opend by "edquota username" command? What is the usage of inode? there are soft and hard items in columns 3 ,4 and 6,7. Which of them should be configured? here is the example by CentOS documents. I only changed the file system which is in my case /dev/sdb0 (this is mounted as /home in my system. What changes I should do to this example to limit the user to 10GB disk scape?
Disk quotas for user testuser (uid 501):
Filesystem blocks soft hard inodes soft hard
/dev/sdb0 440436 0 0 37418 0 0
I know if I run repquota -a I can see the quotas set for all users.How do I modify the quota for a specific user?So say the output for john is:User used soft hard grace used soft hard grace----------------------------------------------------------------------john.someth -- 122844 51200 51200 4995 0 0How do I make his block limits 0 so they are unlimited?
View 1 Replies View Relatedis it possible to limit the size of a specific folder independent of user or group? I want to restrict /var/log to a total size of 1GB. I don't think that the common approach to create a 1GB partition is the right way since it is possible that I want increase or decrease the limit in the near future.
View 3 Replies View RelatedThere isn't any separate file system for /home and we have only one (/) root file system for everything else on the system. Is there any way that we can still implement quotas for users through their home directories was mounted on (/) root file system. Do we need to have a separate file system (/home) compulsory for implementing disk quotas?
View 3 Replies View Relatedhow do I ensure a gnome-terminal is kept in focus?
View 3 Replies View RelatedI have 3 WD External USB hard dives. 2 are the same and are rotated for backup purposes and my system assigns them both to /dev/sdb (one is only plugged in at a time), this is fine.The 3rd drive is used for a different purpose and may or may not be plugged in at the same time as one of the others.How can I make the 3rd drive be allocated to /dev/sdc all of the time whether one of the other drives is plugged in or not?
View 4 Replies View RelatedPassword strength in Linux can be ensured by setting parameters in /etc/pam.d/common-password file. But these policies apply only for non-root users, when they set password for themselves.s there any way to ensure strength of passwords assigned by root?Example: Normally root can assign passwords like "hello" "password" etc. Is there a way to ensure that passwords assigned by root must contain a special character and a digit as mandatory?
View 1 Replies View RelatedG'day. My distro is Fedora 13. I received the above subject error message at boot. My /etc/fstab is attached as follow:
#
# /etc/fstab
# Created by anaconda on Fri Mar 5 12:44:10 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
How can I check if Ubuntu deletes all the content in /tmp folder at each shutdown
(without trial and error)?
How can I tell Ubuntu to delete it?
What about the deletion of other tracks like swapfile at shutdown?
When update ubuntu 8.04 amd 64 show this message: Could not download all repository indexes. The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. Failed to fetch [URL] 404 Not Found. Some index files failed to download, they have been ignored, or old ones used instead.
View 3 Replies View RelatedI need to know particular mount point mounted or not before send data to that mount point.Are there any commandsi used this command. mount -t nfs 172.16.102.50:/root/ESSR_share /root/shared_storage/pc50 -o rw,hard,intr but it take long time (when machine(172.16.102.50) is not available)
View 4 Replies View RelatedI was considering adding the below to my RHEL5 system's /etc/pam.d/system-auth file.
password required pam_cracklib.so try_first_pass retry=3 minlen=8
dcredit=-1 ucredit=-1 ocredit=-1 lcredit=0
auth required pam_unix.so nullok try_first_pass
[code]...
In a research environment how can I ensure that all RPMs / packages that appear on one system will exist on another? I.e. when using rpm -qa all libraries on one system will be there on another. The reason for this is to ensure they are as close as possible. Is there an easy way to do this without dealing with a larger management suite tool?
View 1 Replies View RelatedHow do I ensure that my home partition does not get deleted the next time I reinstall Ubuntu, as I can see there is a choice between formatting the whole drive and manually partition it, but if I reinstall won't I delete the home partition as well?
View 3 Replies View RelatedI'm running succesfully Debian 6.0 after first trying Debian 5.0 and ran into missing partitions. This is solved by using Debian 6.0 (Beta 2).
Now it's NVidia's turn: Under Ubuntu (yes...i know it by now...) you had to install a proprietary driver for NVidia to ensure that 3D was supported. What about Debian? There's nothing like this under Debian? How do i know if 3D is supported?
The graphics card on a openSUSE11.4-32-bit system is a ATI RV530LE [Radeon X1650 PRO] It looks as though xorg sets it up with the RV535 or RV560 chipset if the radeonhd driver is selected Is there a way to ensure the RV530 chipset version is loaded when booting.
View 9 Replies View RelatedAfter moving a website folder on my local development machine to another drive, then moving it back, I got a 403 error. Most of this problem had probably to do with rights that got messed up. After deleting the code and restoring it from SVN, the rights seemed allright. The error stayed however.
The setup is a bit complex, as follows:
I have Ubuntu 10.4 as development machine, trying to mimic the server as much as possible We use Eclipse + SVN and I create all projects in a local folder under my user account In /var/www-vhosts I create folders for each vhost, like this one: test.localhost test.local/index.php: includes the index file of the project
test.local/.htaccess is a dynamic link to the htaccess file in a project subfolder
I get the following error in the apache error log:
The problem seems to be the .htaccess file, or the link to it. When I empty the htaccess, nothing changes When I remove the link, the index-include produces some output (in the apache error log) When I remove the link and replace it with the actual file, I get another error:
Things beyond my control are causing me to rush a bit in getting the website moved. I'm working hard to try and get it done, but something else has come up that SSL Certificate.I know that our website's "basket" area is protected by an SSL certificate to ensure customer information, especially credit info, is secure. With the move to Amazon's service, it looks like I may need to create our own self-signed SSL certificate to ensure the basket area remains secure.
I have found guides that walk through how to make one yourself and configuring apache to allow it, but something else has come to mind. The guides I found don't really indicate where the SSL certificate goes afterwards, and also doesn't suggest which sections should be governed by the certificate (as only the basket section uses it, not anything else). How would I find out that information?
Have used 10.04 for almost a year now, and the 'upgrade' now beckons.How can I ensure that my programs and Download files remain intact following the process? I already have 11.04 as an .iso on cd, but am unsure how to proceed.
View 3 Replies View Relatedchange as I salvaged an old old computer and got it back into working order. Windows 7 kills the computer and the media being served is sluggish and slow.
The computer spec are as follows:
Asus A8N32-SLI Deluxe Bios 1303
Asus Nvidia En210
[code]....
I have two HDs, one is a 80gb OS drive(Parallel ATA) and the other is a 1T storage drive (SATA). Well after each reboot they swap between /dev/sda and /dev/sdb, over and over again. One boot the OS is /dev/sda and the next its /dev/sdb, same goes for the second drive. This makes it difficult to setup fstab so it will mount the large storage drive on boot.
View 3 Replies View Related