How do I ensure that my home partition does not get deleted the next time I reinstall Ubuntu, as I can see there is a choice between formatting the whole drive and manually partition it, but if I reinstall won't I delete the home partition as well?
View 3 Replies
I have two partitions: one for / and the other for /home ; now how do I reinstall ubuntu in the '/' partition so that I can reuse /home as it is?
View 2 Replies View RelatedI'm wiping out / on an Ubuntu box but want to keep everything in /home/, which is mounted on a different partition. Using Code: ecryptfs-unwrap-passphrase ~/.ecryptfs/wrapped-passphrase I have unwrapped the passphrase, resulting in a ~25 character alphanumeric string. Is it possible for me to install from a disk and give the installer the (current) passphrase so that it will automatically mount my home directory?
View 3 Replies View RelatedI tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4. Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok". I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
Ok. I have a media server running debian amd64. when I installed it I made separate partitions for root (/) home (/home) var (/var) and swap.
I'm adding some new hardware (mobo and ram) and want to reinstall debian. I would like to keep my home and var partitions intact and just reinstall everything in root (/) partition.
I'm unsure of how to do this during the installation. Do i need to format? how do I tell it to use the /var and /home partitions?
My gateway netbook was dual booted with windows 7 and ubuntu netwbook.,I was attempting free up some space on my netbook and decided that the ubuntu partition was expendable.I deleted it and sufficient to say I now can't boot boot up, I just get an error message, can't remember exactly what it is.I am getting a new computer and would kind of like to be able to recover the files on the computer.I have a USB netbook boot drive and am wondering how I would be able to install ubuntu without loosing the files.I have the usb key plugged in am now at the partition stage of the installation.
View 9 Replies View RelatedI had to delete my swap partition in order to reinstall win XP, but now I need to reinstall it. I run Ubuntu 10.04 and read that there is a command $ sudo mkswap /dev/sda1. I have about 19 GB of free unpartitioned space left on the hardrive that I want to make into a swap partition. I'm not sure whether I should use sda1 or if the book uses it as an example and if I use it it could wipe away my existing partition with ubuntu installed on it.
View 31 Replies View RelatedHow can I check if Ubuntu deletes all the content in /tmp folder at each shutdown
(without trial and error)?
How can I tell Ubuntu to delete it?
What about the deletion of other tracks like swapfile at shutdown?
I have moved /home to it's own partition and all is good. Testing is on sda1 and /home on sda2. However a bit later I wondered what would happen if I had to reinstall testing, would I then have /home on both partitions?
View 4 Replies View RelatedI tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4.Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok".I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
i wanted to migrate from ubuntu (still sux since 2008) i removed the main partition (/) and mounted the old home partition as a home partition for the new installation (kinda dumb, but still my files aren't deleted)
anyway, the gnome desktop sux, it looks like the regular gnome desktop and not the one i used to use in gnome, how to change that
I tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4.Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok".I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
I deleted Ubuntu off of my laptop, because I was having some issues with it (I had lost some of my icons in Software Center, couldn't access my Yahoo Mail etc..). I deleted it using this method. I then went into my Windows Vista OS, and accessed Disk management via Control Panel.The partition Linux was previously on was Unallocated, and I had a D partition which was Windows recovery. I then shrunk my C (main Windows) partition down. I deleted the D partition.So now I have the C partition, and a large unallocated partition. I was planning on installing Ubuntu from CD onto this unallocated partition. I am using the same CD I had previously used to install Ubuntu. My roommate was also using the same CD today to install Ubuntu on his computer. I know the CD works.
So when I inserted the Ubuntu CD it loaded the first couple of screens. It got to the purple screen where the install text would normally have appeared and then continues to load.... but the "do you want to install? etc..." text did not come up. It then loaded to a black screen, loaded back to the purple screen, reads the disc, keeps loading... and loading... and nothing ever comes of it.I tried again, this time when the first purple screen comes up, I hit enter. I get the language select. I then get the options. I click install Ubuntu. it then starts loading... and loading... black screen, purple screen, black screen with text... but nothing comes of it.My windows is working fine. I don't know why it won't install
I was slimming down my Fedora Install for security reasons and i accidently deleted Gnome. How do I reinstall Gnome?
View 6 Replies View RelatedI got a system crippling virus on my windows installation. My recovery disks gave me the same problem. So I installed Win 7 enterprise using a disk my dad got from his work. The installation went smoothly. When I started my computer after it went straight to Win 7 without the GRUB bootloader (not the case with restore disks). Could somebody please help me with this issue because I cant stand using Windows for anything other than games much longer.
View 7 Replies View RelatedThis is partly a note to myself for the future and a guide to anyone who experiences similar issues.
So, I had to reinstall Windows XP since my previous installation gave me a blue screen error due to reasons unfathomable. Naturally, this deleted the GNU Grub and I could not login to my Fedora.
I read that apparently booting from a DVD installation offers an option to enter the rescue mode. I did not have a DVD, I only had the LiveCD so I had to figure out a way to reinstall Grub from the LiveCD. The following method seemed to do the trick.
Run the LiveCD and open Terminal.
1. Find the partition where the Grub Stage1 is code...
I have been out of the Linux loop for a while. Prior to the holidays I did something 'stupid' within Wine and ended up taking out my Ubuntu partition to the point where it wouldn't boot. Being that I have a triple boot system and I had plans for the holidays, I didn't want to risk a reinstall in the event that if something went wrong with Grub, it would render my whole system useless. So I waited until now to reinstall Ubuntu. I performed the reinstall this past weekend and for the most part I thought everything went fine, but I noticed something was different with the file system.
When I attempted to load a 3.5gig program into Ubuntu yesterday, I got an error message saying that I don't have enough disk space. I said to my self, "That is impossible as I have a 106gig partition for programs". I have a separated system in which Ubuntu /root has an 8gig partition and the Home partition supposed to be the 106gig drive. I did this in the event I had to reinstall, I wouldn't loose my information. Well apparently something went wrong with the install and it appears that I have two Home folders...one is on the 106gig drive and the other is in the root directory.
Making note of that explained why my program wouldn't load because the root partition is only 8gig. So, my question is this: Can I set Ubuntu back to the old Home directory, or do I have to reinstall once again? As what under my avatar says, I am on Ubuntu Studio 8.04 (Hardy Heron). I stuck with this older version because it has long term support. I have a triple boot system with Windows XP, Puppy Linux, and Ubuntu Studio. I have two SATA 500gig drives with the first drive being home to all the operating systems and programs. The second drive is just for data.
Here is my fdisk -l I put the partitions usage in parenthesis:
geo@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000cf364 .....
I installed Mythbuntu, got some Wine apps up and running, then discovered my Nvidia DualTV MCE won't work with Myth. So I'd like to try a different variant, either the plain vanilla Ubuntu or UbuntuStudio.Can I just use Mythbuntu to create a new partition, move /home/* to it, and then reformat and install over the original Mythbuntu partition? When I reinstall the new version, how do I tell the installation process to use /home on the other partition (without overwriting it) instead of creating a new one from scratch?
View 4 Replies View RelatedI will be version-upgrading a friends (Ubuntu only) laptop very soon. It is 9.04 now and the new version will be (ideally) 10.04.1 The machine has a large unused area on the hard drive and who has known this situation was to use the uncommitted area to do a complete new install of 10.04.1, leaving the 9.04 unchanged (useful insurance). Then, copy, paste (?) the /home directory from the 9.04 into the newly completed installed 10.04.1 overwriting the installed directory.
Opinions seem to support the notion that such a paste into 10.04.1 is likely to be successful and trouble free as long as the 10.04.1 installing username is the same as the 9.04 username with same privilege level. I would be grateful for comments here, particularly with any details, gotchas, you can see.
I am having lots of problems with fresh install of ubuntu 10.04.1 LTS (dual boot with Win7) and would like to reinstall, however if i just insert the ubuntu CD and boot off of that, when i go to install it wants to create another partition that uses space from my partition for win7. How can i reinstall on my current ubuntu partition?
View 7 Replies View RelatedI'm trying to re-install Grub2 on a dual boot (Win/XP & Ubuntu 10.10) system which will not boot. I am following the guide here:
Code: [URL] This guide explicitly states that the procedure will re-install GRUB to the Master Boot Record, overwritng whatever is there. However, the final step results in this warning message: "grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea....."
I guess I agree - that's not what I want to do. Where is the defect in the procedure and how do I overcome it? If I try alternative advice, available in the forums, by using the command
Code:
sudo grub-install /dev/sda
then I receive the error message
Code: grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?) Looking at the mount command output, I think the required device is mounted.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
I was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies View RelatedI tried to install Ubuntu next to XP. After restart - no XP and no Ubuntu. Something wrong with loader I guess, I see command line prompt (of the loader I guess).
So I restarted from liveCD. But no "Repair Install" option like in XP CD. So, I deleted partition to install again on top of old, then learned a loader possibly could be fixed.
So, the problem is: testdisk cannot restore partition I deleted. I didn't write on disk anything. May be swap space after couple reloads from liveCD corrupted it?
It complains "The harddisk (...) seems to small!", it sees some other partitions and doesn't see what Gparted and Disk Utility.
Let me know the best approach to get back XP running (having Ubuntu would be good too).
Here below are the screen captures for details.
Quich Search results. Can't recover what's found. Why 4 partitions are found? Notice, "The harddisk seems too small !" Could this be a problem? HDD is not Maxtor anymore
The gap is there but no deleted partition shown
Essentially same thing... going for deeper search
Deep Search hasn't recover anything new. And shows same results as Quick Search (2nd testdisc image )Hit "continue"...
Now the partitions shown as deleted because of overlapping. The partition to be recovered is still not in the list.
Anyway, my final goal is to get WinXP back and if possible, install Ubuntu. It's nice that installer still sees the XP. Too bad the loader doesn't. how to get it done.
Unlike during installation of XP, ubuntu doesn't offer to utilize the deleted partition. Is it going to stay empty/unallocated? Forget the empty space, will I get XP running if I continue and install?
I have ubuntu in sda7. sda6 had bt4, sda3 had Win7. From Win7 I removed sda6. Now when I start my computer I get grub rescue. How can I tell grub that ubuntu in sda6 and not in sda7 anymore or how can I create sda6 again so ubuntu goes sda7.
View 1 Replies View RelatedRAM of the machine is 4M. I never see the swap partition has been used via system monitor. So can I safely delete the swap partition?
View 7 Replies View RelatedI installed Mint 8 on my sister's laptop (after her existing Vista, and I did so on a separate partition created during the normal setup process in Gparted) and she now wants to try out another distro and take off Mint, so how would I go about this? Would I boot from the distro's live CD, determine the correct partition, (I'm thinking of Gparted here) and then... what?
- Would I have to mark the partition to be deleted, delete it, then ask it to install on a similar-sized partition?
- Or would I not delete it, just mark to format it as ext4 or some other file system and it would then just install the OS of that live CD over the existing partition?
- What about the swap partition - does that need any changes at all?
- Will Grub/Grub2 et al normally be updated to reflect the replaced OS?
- I may do this on my own desktop machine in the future: I may want to consolidate all my existing partitions into one easy to manage massive partition. Is this also easy to do?
- How can I determine which OSs are on which partitions?
I am using an old username which I have been tied to since my first install, any time I have tried to change it in the past lead to problems such as duplication of files and permission access.
I have a small / partition and a larger /home partition where I store media etc, and on freshly reinstalling Ubuntu 10.10 on / today I was tempted to use a preferred more accurate username and change the computer name - would there still have been consequences to this, if so can they be addressed post install, or can I some how simply just change my username and computer name without confusing my system from here without reinstalling?
*I carried out the re installation using my old usual username and computer name.
I deleted my Ubuntu Desktop Partition to replace it with Ubuntu Studio but when I went to restart the computer and command line thing about how the Ubuntu Partition is missing is showing up. How do I get it to boot to Windows?I'm currently booting from my emergency Xubuntu USB Stick.
View 2 Replies View RelatedI set up my Dell Inspiron Laptop as Dual Boot -> Xp / Ubuntu 10.04. - all worked well. I had 2 installations of XP on this machine and I removed one - all worked well. I then went into XP and deleted the partion (4) that the old XP had resided on (using Easeus Partition Master) All NOT working well !! Now when booting the machine I get grub rescue> I did ls and got ....
[Code]...
