Networking :: Assign A Address To Ethernet Address?
May 29, 2011how to assign a address to my ethernet card all the options available
View 1 Replies
ADVERTISEMENT
Networking :: Program To Assign Globa LIPv6 Address And Bind() To The Previously Assigned Address?
Apr 24, 2010Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
General :: Assign IP Address To 2nd Ethernet Card?
Jun 22, 2010In my red hat Linux machine there was a Lan card using eth0. IP is asign to that network card and it is functioning properly. I add another ethernet card in my linux machineit was detacted and when i use the commandQuote:[root@localhost root] # ifconfig -ait show me both eth0 and eth1 lan cards.I can see Ip address in my eth1 ethernet card but When I enter into
Code:
[root@localhost root] # cd /etc/sysconfig/network-scripts
and i use ls command it only show me the file ifcfg-eth1 and with
[code]...
Networking :: How To Assign IP Address To EC2 Cloud
Nov 15, 2010I have set up a cloud (Ubuntu) environment in my test lad and it's working fine I am confused setting up the public IP in the production environment. The cloud instance will get only a Internal IP address ( Private) we cannot bind the Public Ip to the cloud instance as it uses Elastic IP, so I am confused how can I set up this if I have about 250 Public Ip to 250 cloud instance. How will I map this 250 Public IP with the 250 internal IPs is there any hardware device.
View 3 Replies View RelatedNetworking :: Assign Own IP Address On Ubuntu Desktop?
Jan 20, 2010I am a certified newbie into linux. I am using now ubuntu 9.04. Now here is my question. Is it possible to assign your own IP address on your ubuntu desktop, I mean a fixed IP address? Because everytime I start my computer, my internet service provider will automatically assigned a NEW IP address to my computer, but when I'm on windows the ip address is fixed.
I've installed and configured lampp and joomla. I am trying to learn how to use the joomla under ubuntu using only my computer as my local host. But when I restart my computer, the IP Address that is assigned is different to what I used when I installed joomla so I cant access my website even if I am using the same computer when I installed it. Is it possible to assign a fixed IP Address to my computer under ubuntu.
Networking :: Assign An Alternate Ip Address On Same Lan Card
Jul 10, 2010I am running Linux AS4 Update version. I have one lan card and the primary IP-Address is 192.168.0.215 & subnet is 255.255.255.0
Now I want to assign an alternative IP-Address on the same card & the IP I want to assign is 192.168.15.215.
I run the following command from root user:
Now when I ping this IP 192.168.15.215 From Windows machine then its reply me & properly reply comming from this Ip.
But when I want to access this Ip by \192.168.15.215 from run prompt then it gave me error. The specified network name is no longer available..
I already restart the machine & network service but the problem remains same.
Networking :: Assign A Private IP Address To The Same Interface?
May 15, 2011I recently just upgraded from humble Linux user to confused Linux admin of my own virtual Linux server. When I issue the ifconfig command I get following output.
Code:
venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:1.2.3.4 P-t-P:1.2.3.4 Bcast:1.2.3.4 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
The WAN IP of the interface is not really 1.2.3.4 I just changed that IP for security reasons.What I am trying to figure out, is it possible to assign a private IP address to the same interface or can I only have one IP address per interface. I understand I have a mask of /32 so I am not going to be able to subnet the address to create any more addresses, so I assume I am stuck with the WAN IP (public IP) that I have, and just need to deal with it.
The reason I ask this is because I have been reading through several DNS/BIND tutorials/walk-throughs, and a lot of them specify setting up a intranet access with 192.168.1.1 address for the local DNS server, but since I am connecting to the sever via SSH I figure I do not need a private IP address.
Fedora Networking :: Get The Router To Assign An IP Address Through DHCP?
Jan 24, 2009I noticed that my internet connection wasn't automatically brought up each time I logged into Fedora so I opened the system-config-network tool and edited my network adapter by checking the box marked "automatically start at boot/login." To my surprise, the connection went down and upon trying to click on the device to let the manager bring up the connection the greyed-out phrase "device not managed" appeared underneath the device name and wouldn't allow me to connect.
Even when I used ifconfig/dhclient to get the connection up nothing happened. I could get the router to assign an IP address through DHCP, pinged a few sites to make sure it was legit, but still couldn't use firefox to browse anything. Seems as if network manager GUI is conflicting with command line attempts to bring the network up. I'd like to permanently disable system-config-network if possible because it's acting screwy!
Ubuntu Networking :: Unable To Get DHCP To Assign IP Address
Mar 22, 2010I'm using Ubuntu 9.10, and I want DHCP to assign an IP address automatically. I can ping my router, and get a reply. I just have no idea how to do this.I'm trying to get my Ubuntu machine onto my Windows network.
View 9 Replies View RelatedNetworking :: DHCP To Assign Specific IP To A Particular MAC Address Of A Machine?
Feb 22, 2010I want to setup 1Gbps our lab network and we purchased 'Buffulo Giga layer switch ' with 24ports. Is there a way to tell DHCP to assign specific IP to a particular MAC address of a machine ? We want to use DHCP and whatever the port we use ,it should have same IP ..
View 1 Replies View RelatedUbuntu Networking :: Assign An IPv6 Address To Separate Users?
Apr 15, 2011I have an Ubuntu 10.04 server/router with IPv6 internet connectivity (I have an internet routable /64 subnet). Since I have this abundance of IPv6 addresses I wanted to try and assign v6 addresses to specific users on the local system. I've been looking at ip6tables with packet mangling but I don't seem to be able to find out how to do this or if this is even possible.
Current configuration: eth0: Local network, has the /64 IPv6 public range active and the IPv4 LAN range. tun0: 6in4 tunnel with a ISP assigned public v6 address. eth1: Standard IPv4 internet connection.
All users on my system use the v6 address configured on tun0. I want to force them to use the /64 range which is configured on eth0. If I can force users to use a specific v6 address, I'll configure more then one v6 address on this interface based on the users userID on the system.
Ubuntu Networking :: Samba With Bridge Interface / Cannot Assign Requested Address?
Sep 17, 2010I have two network interfaces in my pc eth0 and wlan0 and a virtual one br0.
router <= eth0 (0.0.0.0) => br0 (192.168.1.10) <= wlan0 (0.0.0.0) => other pc.
On startup of my pc (ubuntu 10.04 server x64), samba bind itself only to loopback network interface, as i can see when i do netstat -an , preventing me to enter in my shares from a remote pc.
Here is my configuration regarding samba network:
Code:
interfaces = 127.0.0.0/8 192.168.1.0/24
bind interfaces only = yes
and my /etc/network/interface
Code:
# The loopback network interface
auto lo
iface lo inet loopback
code....
Any idea fo speed up my bridge configuration or to force samba to wait unitl the bridge is ready?
Networking :: Networking Routing \ Use The Terminal To Assign Server Eth0 A Proper IP Address?
Jun 8, 2010i know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 192.168.1.6 this connects to the router that has internet access.eth0 i intend to have the following settingsip:192.168.0.1sub: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: 192.168.0.100sub: 255.255.255.0gateway 192.168.0.1i have then set the router IP for LAN handling as 192.168.27.1 and all ethernet connections will have a 192.168.27.x IP.
so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through
Networking :: USB / Ethernet IP Address Selection
Jun 8, 2010I have a usb device that is setup to use a networking interface. When I connect the usb device, ifconfig automatically shows a new interface "usbX", and it has an assigned IP address, e.g. "192.168.X.1" - yes, the "X" is the same number between the address and the interface name. Each time I connect the usb device, it gets a different ip address...
192.168.9.1, 192.168.10.1, etc (actually the device address ends in .2, the PC is .1)
How do I configure this device to always have the same address? Or maybe it's more accurate to ask, how do I configure linux to always assign the network address with this device?
Networking :: Cannot Determine Ethernet Address For Proxy ARP?
Mar 31, 2010I had had my internet connection working using PPPoE, but after I did some tweaking and configuring on the machine (configuring Samba), I wasn't able to connect to the internet and on the syslog said:Code:Cannot determine ethernet address for proxy ARPI'm using dynamic IP address on my internet account. Is this problem related to Samba server configuration that is running?
View 2 Replies View RelatedNetworking :: Mapping Ethernet Multicast Address?
Nov 23, 2010have a doubt about the multicast address.I have read that IP and ethernet multicast address have the same last 23 bits. While an ethernet multicast address always starts with 01:00:5E. Changing the last 23 bits of the IP address into hexadecimal form and "adding" them to the first 24 bits we find the ethernet address but what about the missing bit??? For istance I have: 230.11.111.10 = 11100110.00001011.01101111.00001010 So converting the last 23 bits I have b:6f:a The final ethernet address will be 01:00:5E:b:6f:a . And what about the missing bit?
View 1 Replies View RelatedUbuntu Networking :: Physical Address For Ethernet Adapter?
Aug 26, 2010I've just arrived at uni and to set up my wifi apparently I need my "media access control which is listed as the phsyical address for ethernet adaptor local area connection." on windows you can find it by using the command ipconfig /all but that didn't work when i put it into terminal.
View 1 Replies View RelatedGeneral :: How To Assign IP Address
May 14, 2010I have a fresh installed redhat 9 with 1 network card attached may I know what command will I type to assign 10.0.0.1 on the network card?
and also when I type hostname it always reply localhost.localdomain
how can I assign a hostname
Ubuntu Networking :: Port Forwarding From Public Address To Private Address?
Feb 24, 2010Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
Networking :: Error Str2addr:Address 35 Outside Range Of Address Field Length 1?
May 12, 2011I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
Networking :: Error: "bind: Cannot Assign Requested Address"
Jun 18, 2010I have a small cluster (OSCAR, Fedora 8) and I was able to run some application software on it. Then lightning struck very close to the building. Fortunately I had unplugged all the power cables (because the cluster has not yet been moved to where the power lines are protected), but it seems that the institution didn't have any protection on their LAN cables, and so the whole building's public network cards are damaged. A costly lesson.
Anyway, when I tried to run the application software in parallel across the cluster (using the private network which is unscathed) I get the error message given in the subject line. I contacted the application software's help department as I thought I had perhaps forgotten to set something, but according to them it is a normal network problem.
Quote:
Check the /etc/hosts file and make sure that the nodes all have a single definition and you don't have lines like
127.0.0.1 localhost normnode3
and that normnode3 has the same address both on the master and on the node. try ping normnode3 from the master and see what address comes back 64 bytes from 164.190.57.105: icmp_seq=1 ttl=64 time=0.306 ms or is it 127.0.0.1. Then do the reverse. Also double check that you can ssh between nodes without password but I would expect a different error then. The command "hostname" returns gnlserv01, which is the public NIC.
After the lightning I had trouble getting the nodes to communicate "automatically" with each other, but it can be cured by starting the xinetd service and disabling the firewall on the master node (it's not too dangerous since I don't have a public interface at present and since I'm sitting behind the institution's firewall as well.) Just by the way, I would think that ther should be a file somewhere in which I could specify those two commands to take place when the master node is switched on. Could you perhaps enlighten me as to where and how I could specify it?
I was wondering whether I would need to explicitly start a bind-type service or something like that? (Since I had to explicitly start xinetd) I'm rather clueless really. I googled around and found that there is a named service, so I tried to start it, but I don't think it's installed on the computer. Therefore, since I have managed to run the application software in parallel previously, the named service is probably not the problem. Here is a copy of how my /etc/hosts file looks like:
Code:
# Do not remove the following line, or various programs
# that require network functionality will fail.
# These entries are managed by SIS, please don't modify them.
127.0.0.1 localhost.localdomain localhost
[code]........
Ubuntu Networking :: Static IP Address And The Install Configures For A DHCP Configured Address - Network Not Starting
Dec 16, 2010Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
Ubuntu Networking :: IP Address Set To Manual But Still Queries DHCP For Address
Mar 12, 2011I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies View RelatedNetworking :: Dynamic IP Address With PTR Record Versus Fixed IP Address Without?
May 7, 2010I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies View RelatedUbuntu :: Assign A Static Ip Address?
Jun 13, 2010I want to assign a static ip address, my network/interfaces files shows
Code:
auto lo
iface lo inet loopback
am I correct to add
Code:
iface eth0 inet static
address 10.42.43.10
netmask 255.255.252.0
gateway 10.42.43.1
or is there more I need?
Networking :: Bind External IP Address To Internal IP Address?
Jun 7, 2009I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies View RelatedFedora Servers :: Cannot Assign IP Address To Eth0
Feb 17, 2009Just Installed Fedora 10 on Dell PowerEdge 2950. Installation went fine. Problem is I cannot Assign a Ip address to eth0. Service "NetworkManager " dies on its own "ifconfig eth0 192168.0.8/24" works though.
View 6 Replies View RelatedFedora :: Error: Cannot Assign Requested Address
Jun 7, 2010Every time I upgrade my system I run a post install script. This script made some harm to the network start that prevents sshd from starting, but I was unable to detect the problem. In my boot.log I found this:
[...]
Starting NetworkManager daemon: [ OK ]
Starting Avahi daemon... Jun 2 14:58:48 Antares kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
[code]...
So there is a "bind to port 22 failed" probably caused by "eth0: link is not ready", but after the sshd init script fails the eth0 is ready...
General :: Assign IP Address Using Command Line?
Mar 26, 2010I am using internet in my home PC using Red Hat 9. To assign static IP to my linux machine I use "System Settings....> Network" and then double click on "eth0" to assign the static IP.Well these all settings by using GUI interface.Kindly guide me that if I use only command line interface "runlevel 1" then in that case which file should i edit and assign my static IP,Subnet Mask,Default Gateway DNS settings.2- 2nd thing is,is there any way that I may open web broswer in command line? or the administrator should only use internet on Run Level 5 ?
View 14 Replies View RelatedServer :: Assign An Alternate Ip Address On Same Lan Card
Jul 10, 2010I am running Linux AS4 Update version. I have one lan card and the primary IP-Address is 192.168.0.215 & subnet is 255.255.255.0
Now I want to assign an alternative IP-Address on the same card & the IP I want to assign is 192.168.15.215.
I run the following command from root user ifconfig eth0:1 192.168.15.215 netmask 255.255.255.0 up
Now when I ping this IP 192.168.15.215 From Windows machine then its reply me & properly reply comming from this Ip.
But when I want to access this Ip by \192.168.15.215 from run prompt then it gave me error.
The specified network name is no longer available..