I dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
Code:
telnet mylinux 443
it responds
[code]...
I dont know for what reason, I started having this message whenever I try to start httpd.
I commented "Listen 443", restarted httpd started correctly.
I issued "lsof -iTCP:443", I get
Quote:
I can not understand where this come from and why. It seems that it is IPV6 protocol which is in fact not enabled on the network card.
Also, I can not find or dont know where 443 is configured apart from ssl.conf or httpd.conf
Today, I have added xrdp applications in order to be able to connect using RDP.
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down. Unable to open logs
I am new to apache2 server i have been trying to start the server using the default httpd.conf file provided in the source code but when i give the following command sudo /usr/local/apache/bin/apachectl start i receive the above error and the server shuts down.
After upgrading centos from 5.3 to 5.4 I have had this error when trying to restart apache:
[root@server1 conf]# apachectl stop
httpd (no pid file) not running
[root@server1 conf]# apachectl start
(98)Address already in use: make_sock: could not bind to address [::]:80
[code]....
I did the following to resolve:
fuser -k -n tcp 80
Then I restarted apache just fine.
I want to let a regular user (not just root) restart apache on my Ubuntu machine.I was using /etc/init.d/apache2 so I figured this is what I have to set permissions for. I set the owner group for this file a group to which that user also belongs. I set the chmod to 775 but it didn't work. I then even set it to 4775 thinking this would totally make it work but it still didn't.I'm obviously giving permissions to the wrong file.
The error says:
Quote:
httpd not running, trying to start (13)Permission denied: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs But I didn't find httpd anywhere on my machine.
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
View 2 Replies View Relatedi have followed web site [URL] for MAC to IP bind but it dont work on my system
Code:
acl manager proto cache_object
acl localhost src 127.0.0.1/32
acl to_localhost dst 127.0.0.0/8
[code].....
i have a xeon machine with ubuntu os machine specification is 3gb RAM 3 scsi hard drives each 73gb it have two ethernet cards one ethernet card is connected with adsl modem and the second is connected with LAN. now what is mikrotik doing for me is control access to bind mac adress with ip adress and control the band width for induvisual conection.
View 2 Replies View RelatedI am currently trying to get a B.A.T.M.A.N mesh network up and running. the thing uses UDP port 4305 for broadcasting to nearby nodes and it seems this port is closed or used by something else.
now i have tried to open this port with commands like
Code:
iptables -A INPUT -p udp --dport 4305 -j ACCEPT
iptables -A OUTPUT -p udp --dport 4305 -j ACCEPT
it still gives me the same error saying the socket cannot connect.any way for me to scan that udp port, see what is blocking it and open the thing up ?
I am having difficulties in establishing a vpn connection using vpnc (or NetworkManaager-vpnc).
As long as the openswan IPsec daemon is running, vpnc-helper quits with the error message
Quote:
Failed to bind to 0.0.0.0:500: Address already in use
[user@computer ...]# vpnc-helper --local--port 0
If I use NetworkManager-vpnc, then establishing the connection simply fails.
Using the --local-port 0 option does not change anything.
If I stop the ipsec service (service ipsec stop) then establishing the connectiong works, both with NetworkManager-vpnc and the console tool, but apparently the network traffic is not routed via the VPN - in my case this means that I cannot access hosts within the vpn and stuff.
Funny thing is - on my notebook from where I connect via WLAN, everything works fine. With Fedora 13 everything works fine, too.
Does anybody have an idea how to enforce that the vpn connection is actually used?
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
View 1 Replies View RelatedI am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
View 1 Replies View Relatedwriting TCP server which is listening on port 6000. as soon as client closes the connection my server should Relisten on the same port I am getting address already in use error while binding for the second time, even if i am using SO_REUSEADDR..
View 1 Replies View RelatedI have a small cluster (OSCAR, Fedora 8) and I was able to run some application software on it. Then lightning struck very close to the building. Fortunately I had unplugged all the power cables (because the cluster has not yet been moved to where the power lines are protected), but it seems that the institution didn't have any protection on their LAN cables, and so the whole building's public network cards are damaged. A costly lesson.
Anyway, when I tried to run the application software in parallel across the cluster (using the private network which is unscathed) I get the error message given in the subject line. I contacted the application software's help department as I thought I had perhaps forgotten to set something, but according to them it is a normal network problem.
Quote:
Check the /etc/hosts file and make sure that the nodes all have a single definition and you don't have lines like
127.0.0.1 localhost normnode3
and that normnode3 has the same address both on the master and on the node. try ping normnode3 from the master and see what address comes back 64 bytes from 164.190.57.105: icmp_seq=1 ttl=64 time=0.306 ms or is it 127.0.0.1. Then do the reverse. Also double check that you can ssh between nodes without password but I would expect a different error then. The command "hostname" returns gnlserv01, which is the public NIC.
After the lightning I had trouble getting the nodes to communicate "automatically" with each other, but it can be cured by starting the xinetd service and disabling the firewall on the master node (it's not too dangerous since I don't have a public interface at present and since I'm sitting behind the institution's firewall as well.) Just by the way, I would think that ther should be a file somewhere in which I could specify those two commands to take place when the master node is switched on. Could you perhaps enlighten me as to where and how I could specify it?
I was wondering whether I would need to explicitly start a bind-type service or something like that? (Since I had to explicitly start xinetd) I'm rather clueless really. I googled around and found that there is a named service, so I tried to start it, but I don't think it's installed on the computer. Therefore, since I have managed to run the application software in parallel previously, the named service is probably not the problem. Here is a copy of how my /etc/hosts file looks like:
Code:
# Do not remove the following line, or various programs
# that require network functionality will fail.
# These entries are managed by SIS, please don't modify them.
127.0.0.1 localhost.localdomain localhost
[code]........
In my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
View 6 Replies View Relatedhow to assign a address to my ethernet card all the options available
View 1 Replies View RelatedI'm using xubuntu 9.10. NOT ubuntu server. I need to install a lamp server on my box. I cannot install a new OS like ubuntu server, have to use what I got.when I run apache2, I get:
Quote:(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs I've changed the port that php listens too to 8080, 81, and I get the same message but with the new port number.
I've removed and installed apache three times, read all kind of threats on the web, but cannot find the solution! it's just driving crazy.
I have MySQL installed on my Kubuntu 10.04 desktop machine which I use for developing web applications.First, all worked fine. But then I wanted to synchronize the database with the MySQL database on my laptop, so I had to allow connections from the LAN interface. So I addedCode:bind-address =192.168.0.100to /etc/mysql/my.cnf. This worked and the synchronization was performed. I want to do this on a regular basis so I would like to keep that line in there.The problem now is that MySQL does not start on system boot. When I start up, mysql simply is not started. There are no errors in /var/log/mysql/mysql.err or /var/log/mysql.err; these files remain empty.When I try to start it using 'sudo start mysql' I get the same result. The 'start mysql' shows up in 'ps aux', but the mysql process itself does not.Now, I found out that when I run
Code:
sudo -u mysql mysqld
The mysqld daemon does start, and the server works fine. To make matters even more strange, if I kill this
[code]....
I have vps box with debian. I have two ip addresses, but first (default) is currently unavailable. In that case there is many problem. Fortunately wget has --bind-address option so I can download. My question is how can i configure apt-get, aptitude to use specific address?
View 1 Replies View RelatedUbuntu was a good choice for free server O/S. I am currently downloading it. My ISP wants to bind my static IP to a MAC address of the device that will be making my connection for me. Should my server be behind my router or in front of it? I kinda wanted it to be the access point and be able to monitor the usage from all the terminals in my house. We have 4 other PC's, a laptop and a PS3. My server is a Acer Altos G530 with 3.2 Xeon Processor, 4 gb of ECC DDR,
View 7 Replies View RelatedI need to publish my local webserver from my lan to access outside using internet, I have public ips provided by ISP my local webserver address is 192.168.1.5 and I want to bind this local address to a public ip (Ex: 61.8.153.212) to use it out side my lan through squid.
View 11 Replies View RelatedI did not use below configuration in my racoon conf,
remote anonymous {
exchange_mode main;
lifetime time 1 hour;
proposal {
encryption_algorithm 3des;
hash_algorithm md5;
[Code]...
I've pruned your post from where you originally posted. In the future, please check the dates on threads which you're thinking about posting in. If you see they are dead (inactive for a few months or more) just let them rest in peace and start your own thread. You can always include links to reference the dead thread if you need to, as I've done here.
- I setup port forwarding of openssh :
connect 1: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22222:ip-server1:161
- Then I setup second connection
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- Openssh waring to me "bind: address already in use"
- So I think port 22223 have had another program use,I use command:
ps aux | grep ssh /* find process id of second connection */
kill -9 <process-id-second-connection>
netstat -an | grep 22223 /*find which program use port 22223> */
- but I can't find anywhat
- Then I run again command :
connect 2: ssh -g -f -p 11111 -i /<path-to-private-key> user1@ip-server1 -L 22223:ip-server1:3306
- And I receive a error from OpenSSH :" bind: address already in use"
I have a dedicated control computer that can only be accessed with web-browser (with its ip-address). My DHCP-server gives a static ip-address to the control computer (base on its mac-address). Somehow and after some time the control computer looses its ip-address (can't ping to it any more) ... and then I have to reset the control computer to get it to pick up the ip-address ... this is not a good solution since the control computer is not nearby. is there a way to force the control computer to renew its ip-address based on its mac-address
View 1 Replies View RelatedMy security software has picked up multiple port scanning detections on my router/network and only the IP addresses are available. Is it possible to find out what the remote mac address is to see if the IP source has been spoofed? I've got a couple of different IP sources which were found scanning my ports.
I don't know if my IP and the remote IP address are on the same network or subnet for that matter which is the reason for my wanting to know what the mac address is to find out if its coming from the same remote machine.
I have one problem regarding my web server. When I am try to restart my httpd service it shows...
[root@localhost ~]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs [FAILED]
[root@localhost ~]#