Networking :: Error Str2addr:Address 35 Outside Range Of Address Field Length 1?
May 12, 2011
I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
I use F12 and I need help with correct syntax to specify range of IP address in hosts.allow or hosts.deny or in /etc/exports file eg. 192.168.1.100 to 192.168.1.255.
I need to create two Access Control Lists for my networks using SQUID proxy. The ip address range from 165.165.42.10 to 165.165.42.50 for one network and from 165.165.42.60 to 165.165.42.90 for another network. How can I make it?
I would like to set a double range of IP address with my DHCP3-server. Now, I have eth0 (which is my only network card) with this IP address : 172.16.93.1 and I have created a second interface eth0:1 with this address: 192.168.3.1. The goal is to give an IP address 172.16.93.X to phones (with option 66) and the IP address 192.168.3.X to the computers.
This is my DHCPD.conf : ddns-update-style none; option domain-name "mycompany.com"; option domain-name-servers 172.16.93.1; default-lease-time 3600; max-lease-time 2347200; authoritative; log-facility local7; option ip-forwarding off; default-lease-time 20; max-lease-time 20; .....
Right now my DHCP server work fine, (I means, no error at the startup ) but the server give always the same kind of IP address, whatever if it's a phone or a computer. I notice something "wired", if I put the : subnet 192.168.3.0 netmask 255.255.255.0 { range 192.168.3.100 192.168.3.199; option routers 192.168.3.254; } (Which is first in the dhcpd.conf) after the "subnet 172.16.93.0 netmask 255.255.255.0", the server will give IP address 172.16.93.X at all the clients. Is it possible to give more than one IP range with one network card at the same time? And how set the option 66 to only give IP address (172.16.93.X) to the phones?
This morning it would not boot; when I tried to wake up the system, it gave me a bunch of errors, the last ones being as follows: "mount error: could not resolve address for servername: No address associated with hostname mountall: mount /media/shares [1402] terminated with status 1" I am writing this in Win 7 since I lost ubuntu. I am using ubuntu 11.04.
The thing is that the command for sed resembles the following
[code]...
Now if I want to place another command like grep or cut in the address field how do I do it. Actually I don't know the line number. The user has to give it as an input. How shall I do that?
Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
I'm running Ubuntu 10.10 and I'm having problems trying to assign it a static IP address. No matter what I put in the Preferences->Networking area (identifying the interface as Manual)... it still will query DHCP for an address if I run the dhclient command. I'm using to using ubuntu server where I just set the IP in the interfaces config file.
I am running my own Postfix mail server. Some time ago I noticed that most email was rejected because of the server's dynamic IP address. So I got a fixed IP address. However then I noticed that some mails got rejected due to failing the reverse DNS check. So my ISP told me to get a range of IP addresses and they could then create a PTR record for one of those addresses. That is now running but it turns out that the IP address used for the PTR record is a ... dynamic IP address. So Spamhaus PBL rejects my emails again.
I have a few external IP's assigned to me by my ISP. I have IPcop as my router/firewall. I am wondering how to bind 1 of my external ip's to my internal ip address. So I do not have to port forward, etc. For Example, 77.77.77.77 to 192.168.1.123 and on the server it see's the external IP address.
In my job I use some ethernet embedded devices. They take an ip address from dhcp server or auto ip. I only know mac address.How can I obtain ip from mac address? In other words I need a rarp packet generator.
I dont know for what reason, since 2 days, I started having this message whenever I try to start httpd.I commented "Listen 443", restarted httpd started correctly. I needed to comment "listen 443" in order to be able to start httpdWhat is strange is when I do
I'm assuming that the following should block the complete 178.123.xxx.xxx address range.
Code: iptables -I INPUT -s 178.123.0.0/24 -j DROP Then I believe that I need to save this change.
Code: service iptables save iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ]
However, I'm not so sure that it is actually working based on the fact that there continues to be access to my wiki from that address range. The following is after I made the firewall change.
Quote:
178.123.177.61 - - [31/Dec/2010:04:24:40 -0500] "GET /mywiki/Opera%20Web%20Browser?action=edit&editor=text HTTP/1.1" 200 6346 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)" code....
Let me state that I'm new at this iptables thing. I did some reading and decided that I need to make the above change to the firewall but it doesn't seem to make a difference.
I am setting up a iptables firewall on one of our servers, and I would like to block a range of addresses from getting into the system. I am using a script that does a BLACKIN and BLACKOUT methodology for specific addresses. One example is the following:
Code:
$IPTABLES -A BLACKIN -s 202.109.114.147 -j DROP ... $IPTABLES -A BLACKOUT -d 202.109.114.117 -j DROP
What would be the correct syntax to use if I wanted to block an entire remote subnet from getting into the server?
I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
I am running Debian Squeeze with the following basic services running:DNS DHCP Samba Squid
The server is setup with three NICs: eth0 (WAN1), eth1 (WAN2), and eth2 (LAN).The server addresses clients with an IP range of 10.0.30.1 - 10.0.30.254. Some clients will be set with reservations so they fall into the 10.0.40.1 - 254 range.
What I want to do is have any outgoing external traffic coming from the first range (10.0.30.0) to use WAN link 1, and any outgoing external traffic coming from the second range (10.0.40.0) to use WAN link 2.
I have sort of got something working. I have created a bare minimum transparent squid3 setup on port 3128, and set the iptables as follows:
I can get internet access, however obviously it only goes through one WAN link. It also seems slower than it should be. I experimented with tcp_outgoing_address, but seemed to not be my friend.
I have a dedicated control computer that can only be accessed with web-browser (with its ip-address). My DHCP-server gives a static ip-address to the control computer (base on its mac-address). Somehow and after some time the control computer looses its ip-address (can't ping to it any more) ... and then I have to reset the control computer to get it to pick up the ip-address ... this is not a good solution since the control computer is not nearby. is there a way to force the control computer to renew its ip-address based on its mac-address
My security software has picked up multiple port scanning detections on my router/network and only the IP addresses are available. Is it possible to find out what the remote mac address is to see if the IP source has been spoofed? I've got a couple of different IP sources which were found scanning my ports.
I don't know if my IP and the remote IP address are on the same network or subnet for that matter which is the reason for my wanting to know what the mac address is to find out if its coming from the same remote machine.
I'm only partially new to Linux. I'm running Fedora 11. I've just set up two machines, I thought to be identical. Evidently I missed something. I had some problems getting the network started on the second machine, and I must have forgotten a name change somewhere. Anyway, after doing lot's of comparisons between the boxes, editing and renaming and re-linking the ifcfg-GigaStorey file, they are both functioning. The problem is that whenever I start or restart the network on box 2, it reports the following error:
Bringing up interface GigaStorey: RTNETLINK answers: File exists Error adding address 192.168.1.6 for eth0. [ OK ] The file ifcfg-GigaStorey is linked in the following directories /etc/sysconfig/network-scripts /etc/sysconfig/networking/devices code....
Like I said, it's not super critical, just annoying. The networking comes up ok, but the error is puzzling. I figure if I learn what this problem is I'll be one step closer to my Linux beanee.
i want to mount ip address in linux i used following command bun an error apeares
Code: #ifconfig eth0 192.168.0.31 #mount 192.168.0.31:/ /mnt mount : 192.168.0.31:/ faild reason given by server. permision deneid i had turn off iptable in network services , i using Fedora Core 6
Im an academic (university networks and security lecturer) studying/teaching network and operating system security, and inspired by the work of Hovav Shacham set about testing ASLR on linux. Principley I did this by performing a brute force buffer overflow attack on Fedora 10 and Ubuntu 9. I did this by writting a little concurrent server daemon which accidently on purpose didnt do bounds checking.
I then wrote a client to send it a malicious string brute forcing guessed addresses which caused a return-to-libc to the function usleep with a parameter of 16m causing a delay of 16 seconds as laid out in [URL] Once I hit the delay I new I had found the function and could calculate delta_mmap allowing me to create a standard chained ret-to-libc attack. All of that works fine. However .... To complete my understanding I am trying establish where I can find the standard base address for ubuntu 9 (and other distros) for the following, taken from Shacham:-
Quote:
[code]....
/proc/uid/maps gives me some information but not the base address ldd also gives me the randomised starting address for sections in the user address space but neither gives me the base address. Intrestingly ... when a run ldd with aslr on for over (about) 100 times and checked the start point of libc I determined that the last 3 (least significant) hex digits were always 0's and the fist 4 (most significant) where between 0xB7D7 and 0xB7F9. To me this indicated that bits 22-31 were fixed and bits 12-21 were randomized with bits 11-0 fixed. Although even that doesnt define the boundaries observed correctly.
Note: I am replicating the attack to provide signatures to detect it using IDS, and for teaching purposes. I am NOT a hacker and if needed to could reply from my .ac.uk email address as verification.
I want to pass ip address,port address and some parameters from command line using python script.The ip address and port address for establishing socket connection and remaining parameters to execute different connection.
I need a small shell based program that prints the mac address of physical ethernet adapter from it's firmware. I need this utility for license generation and appliance activation. I have tried several example but none of them is flawless, The easiest method I have found is to parse the output of "ifconfig" command but it has also some drawbacks.
1. Firstly program should differentiate between physical and virtual adapters. Physical means installed on board(wired or wireless) or installed additionally. Virtual adapters are those created by VPN or created by virtualization apps such as VirtualBox/VMWare etc. I am not interested in virtual ones.
2. In case of more them one physical adapters(wired and wireless), it should print the mac address and description(name & vendor) of both/all adapters.
3. If media is disconnected then also it should be able to read the mac address and description(name, vendor) of card.
4. This one is bit complex. I know that 'ethtool' can show you the universal mac address but it's limited to use only 2 types of drivers and won't work in all cases.
I hv Cent OS 5.3 installed as server. I hv a network of approx 100 desktops and laptops. For a security purpose i want to block certain laptops from gaining a the network access using dhcp. Can we block the ip address leasing if a specific MAC address request for a ip lease?
