Networking :: My Internet Doesn't Work
Mar 13, 2010
Hello.
I've openSUSE 11.2, 64-bit version, with GNOME desktop.
My hardware is a Conceptronic c150ru.
Well, I configured it with Ndiswrapper (http://en.opensuse.org/Ndiswrapper_howto), and I hadn't problems.
Then, I tried to enable Internet with the terminal. Firstly, I wrote iwconfig wlan0 mode managed. Well.
Secondly, I wrote iwconfig wlan0 essid (my essid). Well.
Then, I wrote iwconfig wlan0 key (my key wep). An error message appears. How can I write my key wep?
View 2 Replies
ADVERTISEMENT
Nov 1, 2010
I'm runnig f 13 on my laptop, and it runs like a charm. But once in a while, the internet doesn't seem to work properly. It mostly works, but right now i am unable to reach certain pages such at google (which is annoying), whereas other pages like yahoo and this one works perfectly well.
View 2 Replies
View Related
Jan 4, 2010
I just upgraded from 9.04 to 9.10. When I restarted, I admired the new login menu, then went to Firefox. I noticed that my wireless didn't work (it did in 9.04) Thinking I'd just need to reinstall the drivers, I plugged in the computer to a working Ethernet outlet with a working cord. I noticed that Ubuntu didn't tell me that Auto eth0 was connected. It didn't tell me anything. And then I went to Google and realized that the wired connection didn't work either. Then I came here on an iPod Touch and you know the rest.
Edit: And other devices work too on the network.
View 2 Replies
View Related
Jan 10, 2010
I really want to convert over to ubuntu and use ubuntu netbook remix on my new netbook but I've had a hell of a time trying to get it to access the internet, I've tried installing drivers but I don't really know how.
My Netbook Details:
MSI U130
1.66 Intel Atom N450
1GB DDR2 Ram
Windows 7 Starter
802.11 bgn 1r1t Mini Card Wireless Adapter
View 3 Replies
View Related
Mar 10, 2010
I have a desktop pc with xubuntu 9.10 32bit installed. I don't have direct access to this machine, but they told me that internet is not working (firefox, synaptic,etc...), but only skype works! If they reboot on windows, everything works well, so it's not a matter of connection or dns.It's very important because they work with that computer. How can i solve the problem? and what could be the cause of this strange anomaly
View 3 Replies
View Related
Apr 30, 2011
my internet was fine.. until.. i had to work in the school so.. a teacher configured the internet settings.. for something .. ( i don't remember) and everything was fine. but when i returned to my house and conected my lap to internet (cable) the internet didn't work.
ubuntu@VR:/etc/network$ ifconfig
eth0 Link encap:Ethernet direcci�nHW 00:1d:72:46:38:3c
Direc. inet:192.168.1.65 Difus.:192.168.1.255 M�sc:255.255.255.0
Direcci�n inet6: fe80::21d:72ff:fe46:383c/64 Alcance:Enlace
[Code].....
View 9 Replies
View Related
Feb 6, 2011
I have a WUSB54GC v.1 wireless USB adapter which I use to connect to my home network. For some reason, over time my reception has been getting worse. I'm not sure if this is due to the router or the adapter. In addition, when the signal strength dips below 50%, I can no longer receive email or browse the web. This is only a problem with Ubuntu - when I had WinXP installed, I could access the internet mostly regardless of the signal strength.
I started a year ago with the adapter plugged directly into the computer. After a while I found it necessary to use an extension cord to place the adapter outside my room, closer to the router. A while later it was time for another extension cord, and now my reception has gotten worse again, but I can't extend it any further.
View 3 Replies
View Related
Mar 13, 2011
I am running the latest ubuntu and I am having trouble getting networking sorted. I have 2 networks, one wired (eth0) and one wireless (wlan0). I connect to the internet using wireless. The problem is that I can only successfully connect to the internet if I disconnect from eth0. I have hit this problem with Windows machines and the solution was to adjust the "interface metric" in "Advanced TCP/IP Settings" so that the wireless was the preferred connection. How can I achieve something similar in Ubuntu?
View 1 Replies
View Related
Aug 1, 2011
I recently installed Fedora 15 x86_64 on my new AMD Machine and I'm quite pleased with things thus far.Here's where my problem comes. I mainly bought that machine to help me with Development. More specifically, Virtual Machines for testing purposes. I have installed Fedora 15 x86_64 as a qemu-kvm Virtual Machine and it's working.. for the most part. I am having a whole lot of trouble getting it to connect to the Internet.
My guess is the only way I'm going to reliably do that is to setup a Bridge. Yes/no? However, in order to setup a Bridge I need to disable NetworkManager and that where the fun happens. It completely disables my network connection. I'm probably missing something small, but I can't figure out what I'm missing. I've double checked my ifcfg-em1 multiple times(I've been trying for ~24 hours so far) and all the settings are as they should be.
I've turned NetworkManager off and stopped it(chkconfig and service) and turned network on(chkconfig and service). Theoretically I should simply need to turn off NM and turn on network and things should be fine. no?
Well, aside from adding:
ONBOOT=yes
NM_CONTROLED=no
to ifcfg-em1.
View 7 Replies
View Related
Jul 17, 2009
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
View 5 Replies
View Related
May 2, 2010
I can't connect to my ssh-server (on ubuntu 10.04) from any external address. The error in putty is "connection timed out". From my internal network, everything works fine, even if I select my external IP address and port in putty as the destination.
This is what I have done so far:
installed open ssh with the ubuntu server 10.04 cd
set up port forwarding (11041) in my router (seems to work ok, port is open according to "shields up")
configured ssh to use port 11041 in /etc/ssh/sshd_config
changed tcp and udp ssh port in /etc/services to 11041
enabled UFW and did sudo ufw allow ssh
[Code].....
View 4 Replies
View Related
Apr 30, 2011
I've just upgraded to Ubuntu 11.04. Everything worked fine, until I rebooted. Now I can not connect to my home wireless internet, so I can't re-enable third party software sources. I am currently using a different computer, so I know that our internet works. I checked the wireless switch on my laptop, and it says that wireless is enabled. I've rebooted, and it still doesn't work. I tried our wired internet, and that didn't work either (although I'm not sure if our wired internet works; we haven't used it in a few years)
View 3 Replies
View Related
Feb 16, 2010
I have just dual booted my pc to run windows 7(64 bit) and ubuntu 9.10 (64 bit). This is my FIRST time using ubunutu and i have spent the whole day trying to get my internet working but with no success. I have come so close to giving up on ubuntu but for some reason i just cant let go! When i type in ifconfig in the terminal i can see that i have an ip address assigned and i can ping my router. My motherboard came with linux drivers and i tried installing the LAN drivers with the included instructions i have got no where. I did find out that the file name in the instructions was wrong and the actual name is r8168-8.012.00. Here are the instructions-
[code]...
View 8 Replies
View Related
Jun 26, 2011
I just installed Linux on a partition to my hard drive and now my wireless internet doesn't work.
View 2 Replies
View Related
Jan 4, 2011
I've just installed Windows &, but now my internet doesn't work. How is that possible?
View 2 Replies
View Related
Jun 4, 2010
(Beginner)Just installed openSUZE 11.1 Dual boot with Vista. I can set up my wireless settings, wep, etc and it says it connects just fine. But when I try to USE the internet it doesn't work. Nothing in update, nothing in firefox. It says it is connected but it's acting like something is blocking it.
View 2 Replies
View Related
Jan 4, 2010
After upgrading Jaunty to Karmic internet sharing (iptables) stoped working. Nothing in iptables configuration was changed.
Code:
# iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
[code]....
View 2 Replies
View Related
Jan 16, 2011
My wireless adapter connects to my WPA2 network perfectly, but when I run firefox it says it can't load the webpage, no matter what page I go to. Also, downloading new software doesn't work either. Any ideas please?
View 9 Replies
View Related
May 3, 2010
I have Ubuntu Lucid Lynx and suddenly my wired internet network doesnt work anymore after a forced restart.
View 9 Replies
View Related
Apr 23, 2009
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies
View Related
Feb 7, 2009
I've been trying to connect to the internet in Fedora 10 for the last week but can't figure it out. The OS has automatically connected to the internet a couple of times but now does not connect at all. The LAN ROM Boot option is enabled in my BIOS and am using a speedtouch 585v7 router provided by my ISP, I have an ADSL router and it's a standard ethernet connection to the router. What do I do to connect to the internet
View 3 Replies
View Related
Jan 22, 2010
I attempted to download and install Linux XP and the installation appeared to be a success. But after install of course the system reboots. Well after rebooting before opening up the desktop it forces me to set up the domain or something It would not recognize my internet/network connection. My ISP provider doesn't use any type of authentic. My internet connection is automatically configured through my modem. How do I get Linux XP to recognize my internet connection and finish the final process so that I can load into desktop ?? I also had a very similar problem with Linux Ubuntu Studio as well. I installed it and I was able to get into the desktop but still was unable to establish an internet connection.
View 4 Replies
View Related
Jan 22, 2011
I have installed Centos 5 on my laptop.And I have installed Oracle databases and also VMWARE server 2 software on it.But I see no page opens in firefox browser on this laptop.I can't understand why.The laptop doesn't have internet connection. But the VMWare web access page where we can login to console and create virtual machines doesn't require internet access.I am a newbie to linux and also network issues.How to figure out what is the problem? Are there any step by step guide to investigate this issue?All the pages I open get stuck with "waiting for abc.com" etc.It never opens.Javascript is enabled for this browser.
View 2 Replies
View Related
Aug 25, 2009
Networking on Fedora 11 doesn't work for me on various machines. Fedora 10 does, but only if you don't do an update.Why does Fedora get worse the more you keep it up-to-date?
View 1 Replies
View Related
Dec 25, 2010
I am using MTS datacard. I have usb_modeswitch installed and have configured the wvdial.conf file. When I do sudo wvdial cdma, the IPs and DNS addresses are also allocated but I still cant access internet.
Code:
dmesg | grep -e 'tty' -e 'modem'
is:
Code:
[ 0.000000] console [tty0] enabled
[ 11.098238] USB Serial support registered for GSM modem (1-port)
[ 11.098352] option 6-1:1.0: GSM modem (1-port) converter detected
[code]....
View 1 Replies
View Related
Feb 15, 2011
I have 2 guest machines on 1 VBox host installed : - one guest with hostname 'debian' is configured as follows and has IP Forwarding enabled to be able to route traffic from eht1 to eth0.
Code:
eth0 Link encap:Ethernet HWaddr 08:00:27:f1:ef:5f
inet addr:10.0.2.1 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fef1:ef5f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 2 Replies
View Related
Feb 26, 2010
I'm trying to troubleshoot some networking issues I'm having between my Linux servers connecting to a server at another location after a Cisco ASA firewall has been installed at my location. I can make the connection work if I lower the mtu on the NIC (ifconfig eth0 mth 1000) - however that supposedly can break the local network if I don't set everything else's mtu to match. Supposedly I can use the iproute package (debian etch) to lower the mtu on a per-route basis, but it doesn't seem to work for me.
Code:
ip route delete default
ip route add default via X.X.X.X mtu 1000
View 2 Replies
View Related
Jul 3, 2010
I have two simultaneous active mobile connections through my two mobile phones and USB data cables. Yet I can only send/receive with one connection.
Each of the phone modems have a node in /dev, namely ttyACM0 and ttyACM0. So the modems are detected correctly. After setting up two dial-up connections with the two modems I have two ip's. Ifconfig-a confirms this:
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.10.219.60 P-t-P:10.6.6.6 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:15209 errors:0 dropped:0 overruns:0 frame:0
[Code]....
View 1 Replies
View Related
Feb 4, 2010
I'm using ubuntu 9.10 with kernel 2.6.33.I want to plot the cwnd of some tcp connections over the time.So I activate the module (as root) with:modprobe tcp_probeand after that I did:cat /proc/net/tcpprobe > test.log &And than I do a little bit surfing or other things, which use tcp - but the file test.log is empty
View 6 Replies
View Related
Feb 9, 2010
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies
View Related
