Ubuntu :: Wireless Adapter Connects But Internet Doesn't Work / Get That?
Jan 16, 2011
My wireless adapter connects to my WPA2 network perfectly, but when I run firefox it says it can't load the webpage, no matter what page I go to. Also, downloading new software doesn't work either. Any ideas please?
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
Have tried methods from every thread I could find for past 10 hrs. Have tried installing rt3070sta etc.Monitored message log; appears that the driver isn't recognized, though the USB port sees that something is plugged in (when I plug in the adapter, and unplug it).All of the threads miss something; I can't get a wireless port listed under ifconfig no matter what I try. Seems that every method leaves out something (I guess because everyone's box is different in some way). Network manager doesn't help much. Downloaded Wicd, which does even less.I guess I could try ndiswrapper, but I'm scared away by the hundreds of pages I see on going that route; I'm almost certain it wouldn't work (1000 possible points of failure).Does anyone have a strategy to recommend?AM64 box, newly installed Edubuntu 10.04, ran update manager.
Will the Netgear WPN111 wireless adapter work with Ubuntu 10.10? If so what action is required to get connected with it running Ubuntu 10.10. The adapter works with Windows XP.
I've just upgraded to Ubuntu 11.04. Everything worked fine, until I rebooted. Now I can not connect to my home wireless internet, so I can't re-enable third party software sources. I am currently using a different computer, so I know that our internet works. I checked the wireless switch on my laptop, and it says that wireless is enabled. I've rebooted, and it still doesn't work. I tried our wired internet, and that didn't work either (although I'm not sure if our wired internet works; we haven't used it in a few years)
Since I have 3 Network cards in my Desktop PC I've configured it to act as a Router using GNU/Linux Ubuntu Lucid in combination with Samba so I could share my internet connection. It works on any laptop a connect to it using any of the network cards ports [regardless of the operating system installed on the Laptops], but when I plug that same network cable to any Desktop PC [regardless of the operating System installed] it doesn't even light the LED in the netcards. From the Client PC seems like nothing is plugged in the the netcards.
The computer connects wirelessly to a router. The router is connected to the internet and that is working well. (If i use a cable connection to the router, I can reach the internet).
Why wont the wireless connection reach the Internet? It is a strong connection. It worked before wirelessly. I am on 10.04 beta, with the recent updates installed.
(Beginner)Just installed openSUZE 11.1 Dual boot with Vista. I can set up my wireless settings, wep, etc and it says it connects just fine. But when I try to USE the internet it doesn't work. Nothing in update, nothing in firefox. It says it is connected but it's acting like something is blocking it.
I'm using the new opensuse 11.4 with KDE desktop. I can connect to my WPA2 personal network fine, but some other networks, like a WPA2 enterprise network connects, but no Internet(pinging too) resolves.
Got a laptop with a RTL8187B wlan card, installed opensuse 11.2 on a 50gb partition. Card was detected straight away but only connects when I enter ip addresses manually, DHCP don't work.
When it is connected it always stays at a speed of 1mb/s and it cannot ping my router or anything else.
Me kernel is 2.6.31.8-0.1-desktop
Searched around the forums but no love, tried compat-wireless but it started crying about dependencies. Modprobed it too..
In openSuse I can connect to a wireless network. It says that it is connected, and I can open the router page (http://192.168.1.1/basic.html). But I cannot load any other pages. Nothing else recognizes internet either; I tried using konqueror, YAST and wget with the command line, and none of them could load anything. It is not a router problem or a wireless card problem because both Ubuntu and Kubuntu can connect, from the same computer. I know this is odd because in the only other thread I could find with this issue, it was a different distro and installing openSuse seemed to fix it.
I am a convert from Ubuntu (9.04 kept freezing on my laptop; when it did work, many packages it seemed were outdated--ie only Eclipse 3.2, rdesktop was messed up [and apparently is also in Fedora]), and I am having some trouble with getting my wireless working.I am running Fedora 11.First off, there is a problem when trying to connect when using DHCP. NetworkManager gets to the second green dot, and then after a short while I am given a message that the connection was disconnected.
Configuring the interface manually, not using DHCP, allows the connection to complete. However, the internet is very slow. There is a 15-30 sec delay before website loading actually commences, and then another delay each time an ad must be fetched from another server.How can I fix this delay? I know I have encountered it in earlier versions of Ubuntu, but I can't remember how I fixed it.About the rdesktop problem, if anyone is able to help [maybe I should post another thread?], the cursor color (the color of the pointer) is inverted---where it should be white it is black, and where it should be black it is white. I use rdesktop a lot to connect to my terminal server in my basement. Any idea how to fix it?
I have an Acer Aspire One D255 netbook with opensuse 11.3 installed and after several painstaking days of tinkering I successfully installed the broadcom wl drivers, and now my wifi card is operational. However, i can connect to my wireless network, but still have no internet access. I have searched the forums and google for a solution but most issues I have found that are similar to mine have been resolved once the wl drivers and firmware where installed
I recently moved out of state and don't have access to the net, however the neighbor of where I am staying is nice enough to let me leech off of her network till I get going. I know next to nothing about slackware and wireless networks since I have never had to mess with it. I have done my reading and have gotten this far.
1) wirelss card is installed and recognized, its a PCI b/g card that uses the ath5 module. The module is loaded and seems to be working.
2) I have heard wicd is easy so I installed it from /extra and it found my essid and accepted the wep password and it says connected at 45% and shows an IP.
however when I launch firefox or try to ping out nothing happens.
I spent $70 on a brand-new Wireless-N adapter for my Ubuntu computer in hopes that I could get it to connect to the main router in the house and get me internet access. However, the driver install CD is designed for Windows and thus will not run. I have tried to get it to set up, but it takes no action when plugged in and I am still without access to the internet. what I can do to get my computer connected and save me from having wasted $70?
I love ubuntu, but I don't know how to use a command line to save my life. I'd just as soon never use a terminal ever. My big issue is I cannot get my wireless adapter to work. It is a keebox w150nu, which is based off the Ralink RT3070 chip. I am willing to use command line to get this thing to work because I love ubuntu to death, but everything I have tried has failed. I have gone to the Ralink website and downloaded the Tar.bz file from there. t
The file I grabbed is the third one down from the top: [URL].
I have absolutely no idea what to do from there with the file however. Please understand that I have zero idea how to use command line in a terminal. What I have to do to make this work? Is there a usb wireless N adapter that works straight away with ubuntu 10.10, as in I plug it in before the install, and it is immediately recognized and works immediately?
I've been trying to get a Zoom wireless-n usb adapter to work. It works under Windows once I enable file & printer sharing.I tried to connect directly to the D-Link router using its IP4 address. I received the message the site could not be found. I used network manager (I think. I'm new to wireless ubuntu networking) and manually set the computer's IP4, Gateway, and netmask addresses. Nothing. I connect the ethernet patch cable and I'm in. Network Manager show the wireless network, set as automatic log in, as never used even tho I've connected to it manually several times. The router is in multi-mode - b, g, & n.
I'd show the output from sudo ifconfig -a, and sudo lsmod | grep rt but I keep getting this error message: " 1. You are only allowed to post URLs to other sites after you have made 15 posts or more."Windows shows the adapter as rt2780 but here you can see it's claiming rt3070. The wireless icon shows it's getting a signal and I can connect to the local network, or so it seems. I'm running it thru a D-Link DIR-628 router. Is there something else I'm missing?
I have a Belkin Wireless G USB Network Adapter but I cant get on the internet with it.The laptop is running Damn Small Linux.Heres what is going on and the code I typed:
ndiswrapper says the driver and hardware are present but iwconfig and ifconfig don't say anything.The wireless adapter works fine in windows 2000 and windows xp with the same driver.The green LED on the wireless adapter never flashes like it is supposed to.
I just got a buffalo bluetooth wireless internet adapter and I need to find out if it can work. I am a linux noob and am using ubuntu lucid lynx, where should I start?
So I recently installed Slackware 13.1 and now want to get my D-Link DWA-140 to work with it. However I'm quite an amateur at Linux and can't seem to figure out how to. After following many different how-tos and tutorials this is where I am: I got 2010_0709_RT2870_Linux_STA_v2.4.0.1 (supposedly USB driver)package and rt2870.bin (supposedly firmware) in my root catalog. What I have already done with them:
make & make install in 2010_0709~ blacklisting modules 2x00usb, 2x00lib, 2800usb modprobe rt2870sta copying rt2870.bin to /lib/firmware
Regardless of everything, my adapter still is not active.. and how can I make the OS load the module at startup?
I recently installed Ubuntu 10.04 (and eventually upgraded to 10.10) on a 6+ year old Gateway Laptop. When I booted Ubuntu up after installing it, I was rather surprised to discover that the wireless card didn't work. I am almost certain that the wireless card is a Broadcom BCM4306, but I am unable to determine what revision it is, if at all. When I look at the network connections widget, it says that the wireless card is not ready, and iwconfig (I think) says that it's disabled.
It's not a problem with the laptop itself, because I was able to get a Linksys usb wireless adapter to work just fine on it, although it was SLOW (about 90 kbs). I am trying to fix this on a FRESH installation of Xubuntu 10.04 with the default packages on it, nothing more. Now, I was able to get the wireless working ONCE on ubuntu, using fwcutter I think, but it went away upon reboot. One last thing, I am running the 32 bit Xubuntu 10.04 on what I think is a 64 bit machine (I think it ran x64 Ubuntu 10.04 before I ditched it), so how to figure out if it is 64 bit.
I use Fedora now for 2 days and all worked fine, but now I have a problem:My wireless internet doesn't work anymore. Normally I see a icon at topbar that tells me I'm connected but now it doesn't.I connected my laptop to my router directly and downloaded WiFi radar to see if that works. That program says: "Not connected".I'm sure the internet card is connected and the switch on my laptop is on. I only deleted BlueTooth, but I don't think that's the problem.
i can't get my wg111t netgear wireless adapter to work. I followed the help thing by installing ndisgtk, which installed successfully. I was able to load up the file on the cd that also the help page said. The problem is that the computer won't load up the adapter as it would load up my cd's and flash drive. Here's how i installed ndisgtk. I installed the files ndiswrapper_common, ndiswrapper_1.9, and then the ndisgtk_0.8.5.All of these were for i386.
Basically I am looking to short-cut the whole learning curve thing and just buy the adapter that I need! What I need is for someone / what usb wireless-n adapter that DOES work with very little effort on my part!
I've got a new laptop with Ubuntu 10.10 (2.6.35-23-generic x86_64 architecture) and with a wireless adapter I can't get to work. The adapter is Realtek RTL8191SEvB: