Networking :: Intermittent "No Network Connection"?
Nov 29, 2010
Over the past two months I've migrated two NetWare servers 6.5 SP7 to SLES10 SP3 and OES2 SP2.'ve had some consulting assistance and been learning linux as I go. Now I have a b!tch of a problem with a Dell PE SC 1430 with integrated Broadcom BCM 5751 GB Ethernet working ok, but then after a reboot it will come up with no networking. I've used Network Manager to configure a static IP but it willsometimes come up and ifconfig will show no ip assigned.I can manually assigned ip, netmask, gw and can ping the gw, but can't ping any host on the subnet. I disabled the integrated NIC and installed another, but same problem.
View 3 Replies
ADVERTISEMENT
Jul 17, 2009
I'm having a bizarre problem where my network connection stops working randomly. At first I thought it was a DNS issue since Firefox simply chilled out on "Looking up [hostname]" until it timed out, but after further investigation (pinging IP's, "host" and "dig" being unable to reach servers) it became apparent that I couldn't even access the DNS servers i.e. the Wicked Connection of the East was most sincerely dead.
There are two strange things about this: one, there are no errors except "timeout". The network manager is happy, Firefox is happy until the lookup fails... Two, the failures only start *after* DHCP configuration. DHCP configuration never has any trouble sending or receiving packets. I'm going to try static IP and whatnot to see if that helps, more information later.
View 3 Replies
View Related
May 7, 2011
Sometimes my file share network stops working,and will then work again.I'm lost with this problem. The server pc is a Zenwalk pc.The other pc is a win7 pc. This error only occurs on Zenwalk. When i run puppy from the live cd the file shares are always visible,without fail.Under puppy i use pNethood. When the ping command is used there is no problem, and the pc name can be pinged.This is shown below:
[Code]...
View 6 Replies
View Related
Apr 3, 2011
In the last week I have noticed that sometimes my Mobile Broadband connection just goes off without me doing anything! I have credit on the dongle account, so it isn't that. I'm using fedora 14 on an acer aspire one netbook. Dongle is a Huawei E160 on o2 here in the UK Kernel is 2.6.35.11-83.i686.fc14
Sometimes unplugging and replugging the usb dongle works. Othertimes, I have to leave it out for several hours. It does seem to happen daily, though.
View 2 Replies
View Related
Mar 27, 2010
Using my usb mobile broadband dongle I am able to access the internet about 25% of the time. I am able to make a connection to the '3' wireless network 100% of the time, but often Mozilla and all other applications that rely on an internet connection do not recognise that this connection has been successfully established, and give me error messages claiming there is no internet connection.
I can't discern any pattern as to whether the connection will be recognised or not. When it isn't recognised, the only solution is to disconnect and reconnect to the network. Sometimes this works and sometimes it doesn't. Sometimes restarting the computer fixes the problem, and sometimes it doesn't. I also have access to a wireless network at uni. I have no problems using this network whatsoever. Housemates using the same dongle on Windows have no problems. I'm using an Acer Aspire one, the dongle is a Huawei e220, I'm running Ubuntu 9.10. I have only recently reinstalled the operating system and have not needed to mess around with any network settings to get the usb dongle to 'work' the way it is currently.
View 1 Replies
View Related
Nov 7, 2010
I've got UNE 10.10 installed on a Samsung N150 that uses the RTL8192E for wireless. When the wireless works then it generally works okay, but I'm having problems with reboots and long-running connections. This is different to the mass of posts (mainly from 2009) about the card not working at all, so I started a new thread.Basically, 90%+ of cold boots result in a successful wireless connection, with Network Manager remembering my WPA password.
When the wireless is up then it never obviously drops out, but I've got an app with a long-running connection that seems to disconnect itself occasionally. Looking at Wireshark then it appears that there are a number of retransmits, and a big batch just before it disconnects (which implies that the app is dropping its connection because it thinks the other end disappeared). Running the app on another machine with a different card but through the same release of Ubuntu and the app and the same router doesn't result in retries or drop-outs.On the times when a cold boot doesn't successfully reconnect then it asks for the WPA password, then continues trying, then asks for the WPA password again, then continues trying, then asks...and so on until I rmmod and modprobe the driver.
I originally had problems with the machine refusing to restore after a hibernate/suspend, but this was solved by a tip to rmmod the driver on hibernate/suspend and modprobe it on restore.The wireless will now work okay on some restores, but is more likely to repeat the behaviour described above for the failed cold boot.
Code:
$ lspci -nn
...
05:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8192E Wireless LAN Controller [10ec:8192] (rev 01)[code]....
Attached is a file with some snippets from dmesg around the time of the wireless failure, and the log of what it does after a remove and re-add for comparison of the "correct" messages.
View 3 Replies
View Related
Feb 25, 2011
I have set up one of my linux box as link load balancer for two ADSL connection. After deployment, I have found out that instead of being fast, it has become slow. What I have observed that my request get out to internet but comes back intermittently. Is this a standard scenario ?
View 1 Replies
View Related
Oct 28, 2010
i have just installed 10.10 under wubi, first time trying to use this network card under ubuntu. works fine on XP where it connects with good signal strength to a zyxel p-600 b/g router (my 3 other machines also connect fine to this router)
i am using WPA2, it takes 30secs to 1min to connect in the first place, then runs slowly and with intermittent disconnects, reports good signal strength in network manager.
i have been fortunate enough to have 3 machines that run ubuntu flawlessly out of the box..
View 1 Replies
View Related
Mar 31, 2010
I'm having problems with my internet connection; it seems to be working fine then every other click of a page there is no connection, then I click it again a second later and it works. I am using a wired network connection plugged into an addon wireless router.
When I use ping under network tools it seems to be fine, then freezes halfway through and doesn't receive those few packets, giving me a transmission percentage of about 70%.
View 2 Replies
View Related
Jul 31, 2010
I have a Dell laptop with a bcm4312 wireless card. Every once in a while though, the laptop is unable to send or receive any data for 30 seconds. The connection is not dropped, and nothing shows up in any system logs. Both the wl and b43 drivers have this problem, but it works fine under vista.
View 1 Replies
View Related
Jan 4, 2011
I just installed 10.10 (2.6.35-24-generic) and my wired network connection is cutting out. I'm dual booting with Windows 7, and it works fine over there. I'm confident it's not a hardware issue. It works initially, but after a few minutes (this varies) the connection will drop out. If I'm on Firefox, I'll get "Loading" until the connection times out. If I'm using RDP to a local computer, I'll lose the connection. When it happens, if I ping a local computer, I'll get:
[Code]....
So I'm getting a bunch of packet loss. Some of the time, once the packets do start going through again, Firefox will finish loading the page. Other times, I have to click on network manager and click on "Auto eth0" which will give me the "connection established" message, and kick the network card back into gear. Sometimes I have to do this several times. It never shows as disconnected, but this somehow gets it going again.
[Code]...
View 1 Replies
View Related
Oct 3, 2010
From time to time I have no connection to the net after booting the machine. This is a wired connection that goes through a switch, then a router to a DSL modem. When there is no automatic connection, I can't connect manually either However if I re-boot the connection works normally.
The Network Connection indicates eth0 and eth1 are both set at "Auto" Strangely the "Last Used" column indicates "Never" for both even when I am actually connected, and on line.
View 3 Replies
View Related
Jul 9, 2010
I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies
View Related
Jan 24, 2010
Its a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
View 5 Replies
View Related
Mar 2, 2011
I have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
View 5 Replies
View Related
Apr 1, 2010
I'm running Federa12 on my Asus EeePC 1005HA and I can't upgrade my system because my network connection flakes in and out. I'm connecting to the D-Link DIR-655 802.11n router. Any hints or ideas? I'd rather solve this than just plug-in the ethernet cable.
View 7 Replies
View Related
Oct 12, 2010
I'm having intermittent network failure on my laptop but I can't figure out why. I have a cable modem and a 10Mb/s (bits) connection (at least that's what I'm paying for). The modem is connected to a wireless router, to which my laptop connects wirelessly. Quite often my speed drops considerably-- sometimes as low as a few hundred bytes per second. Other times it fails completely. This will happen with just about any server you can imagine, including the Debian FTP mirrors in the US.
- When I do file transfers over the local network from my laptop to my desktop, they go pretty fast, around 2 MB/s. I believe my wireless card (Intel 3495) maxes out at 3 MB/s (bytes), so that seems reasonable.
- When I download a file from the outside network, it usually goes pretty fast too, around 1 MB/s, which is close to my limit.
So why is it that the connection between the laptop and the external network is so slow? I've tried power cycling, but it doesn't really help. I can't think of anything else to try.
View 14 Replies
View Related
Apr 3, 2010
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
View 2 Replies
View Related
Jul 20, 2010
Installed openSUSE 11.3 over an existing 'very stable' 11.2 installation and started experiencing wireless connectivity issues immediately. Network Manager would show connected 100% - 92% but I would lose connectivity to mail, browser and messenger(s). This disconnect would last less than 30 secs but would occur every 2 to 4 minutes.
dmesg reported:
[ 3663.672098] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.101085] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.529050] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
BTW Channel 3 is the channel my wifi is broadcasting on. I've tried other channels and other computers and it is only openSUSE 11.3 having an issue. I am also using WPA2. Modifying the Global Options in Network Settings from User Controlled with NetworkManager to Traditional Method with ifup seemed to stabilize most of the issues, but I do notice occasional drops. I've also switched from Network Manager to wicd to provide some UI while dealing with this issue. Since iwl3945 drivers are now in the kernel I don't know if I should try to revert to an older driver or if there is another issue.
View 3 Replies
View Related
Oct 12, 2009
I am losing network bandwidth and I am quite frankly I am not sure why, I don't have allot memory 495.6Mib
But I clean my PC every few days "BleachBit"
I have read some where on the magazine Network receiving suppose to be higher. so how can I fix this issue please i am having allot problems, u use cable from Comcast
I am not quite sure what Information you might need from me to give.
I use Ubuntu 8.04 LTS
View 1 Replies
View Related
Jan 29, 2011
I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
View 4 Replies
View Related
Jul 30, 2011
I am using FC 2, and I get 'eth0 failed' during startup.
I am configured for DHCP
device is 'inactive' under network device control after reboot
click 'activate', sometimes I can surf, others not.
When I can't get online, sometimes deactivating and reactivating works.
edited connection to 'activate device when computer starts'
eth0 still fails at start-up, and device is inactive.
I am supposed to use FC2 for my schoolwork
View 14 Replies
View Related
Feb 9, 2010
I have 2 computer: 1 computer install ubuntu v9.10, in this computer already installed openssh-server and openssh-client, and 1 computer install windows. In computer with windows , i used putty connect to computer with ubuntu, but i can't connect. I don't understand what's error.
In the Putty , i configured:
IP : IP address of computer Ubuntu.
Port 22
Connection Type SSH
This is error: "Network Error: Software caused connection abort"
In computer with windows, i can ping computer with ubuntu and in computer with ubuntu i can ping computer with windows.
View 5 Replies
View Related
May 14, 2010
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies
View Related
Oct 31, 2010
I have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
View 4 Replies
View Related
Mar 12, 2010
Every so often while browsing, DSN fails. The thing is that if I DIG the address at the command prompt the site immediatly pops in in Firefox. what I should do to diagnose the problem.
View 2 Replies
View Related
Dec 30, 2010
I have been running 10.10 server with no GUI for a few months without issue. I decided to install ubuntu desktop (GUI), because I want to turn it into a media server, and I'm finding that my Internet browsing fails intermittently. i.e. I can get [URL] sometimes and sometimes not. I have tried traceroute and found that I do not reach my local router on addresses that fail, and yet I get a full trace on addresses that are ok. Ping tests too.I remember from some time ago that the GUI may cause a network problem but I'm not sure.
By the way, other computers on the network can access this host through Samba so the NIC is working fine.
View 6 Replies
View Related
Jan 16, 2011
Just recently I've been having strange connectivity problems with my wireless network. The connection has previously worked fine and haven't had any problems with it. I haven't installed anything that would have affect it as far as I know. how do I go about testing the network to see where the problem lies? I'm running Ubuntu 10.10 with a Netgear WG111v2 wireless adapter and my guess is it is some strange configuration problem or a rogue application is eating up packets because the system works fine when I boot it up into Windows.
When I try to ping my router I'll usually get something like 98% packet loss. However in the output below, the network sprang to life half way through my pings so it went up to 63%. What other tools can I try to find out what's going on?
Code:
alex@obsidian:~/dev $ ifconfig
eth0 Link encap:Ethernet HWaddr 00:1a:4d:4e:03:3f
UP BROADCAST MULTICAST MTU:1500 Metric:1
[code]....
View 1 Replies
View Related
Oct 21, 2010
I'm also new with linux i tried ubuntu and mandriva, and they worked fine out of the box.But I wanted to try Fedora because it looks great to my opinion.After installing it, everything worked fine, so I updated the system, and after the update my internet doesn't connect anymore, but it does see my wlan ssid. but it just keeps on asking my wpa key.... everytime.
View 4 Replies
View Related
Feb 17, 2010
I have Ubuntu 9.10 installed. Been using it no problem for months. I have a Belkin wireless USB. Worked fine. Until 8 days ago. Just stopped working. During troubleshooting I also discovered that the wired connection also does not work. Rebooted, checked settings, did all that. Nothing. I've plugged the network wire into another machine. It picked up IP via DHCP within seconds proving that it's not the network. I've tried everything that I can think of. What would cause the network within Ubuntu to just stop working? Wired and wireless. The only thing I can think of doing now is to reinstall Ubuntu.
View 6 Replies
View Related
