I want to configure Xean Extranet Client on linux (ubuntu 9.10). Is any one aware of:
:- Were can I download the XEAN client
:- How to configure it.
Let me know what else details is required.
(ubuntu10.10)i want to use use the Intranet and Extranet at the sanme time at school,how to set ?my Intranet ipv4 :10.62.14.79 255.255.255.0 gw 10.62.14.1my Extranet is DSL(use DHCP)my problem is when i use one of them,i must break the other.
View 3 Replies View RelatedAlright, I've been trying to get this fixed on my own, but I think I am missing a fundamental principle and no amount of scripts or hacks is gonna take place of that. I have adito/OpenVPN installed on my media center. It runs fine and I can access adito in my internal network from other computers just fine. But, the whole point is I want to be able to access it remotely!
Now, I had previously made a run at an external FTP site and failed miserably at that, and I think its all coming down to me not knowing how to configure my own router. I have a Netgear router, I can log into it and under Router status I can get what looks to be my routers external IP address. But if I try to access it at https://XXX.XXX.XXX.XXX:4433 (didn't want to use the default port, 443) I get nothing.
So, my main problems as I understand them are:
1)I need to clear the firewall on my router to allow traffic in/out of my reserved port
2)I need to forward incoming requests on that port to the static internal IP of my media center
3)I really would like a more reliable way to verify the info im getting from my routers admin settings page is actually my external IP, is there a command for this or a website that will tell me?
I until yesterday when trying to configure the wireless (broadcom) on my laptop could browse the internet and install packages normally. but now none of the connections are working
[Code]....
I just installed Debian 5 on my system and I didnt have it on the network and I chose not to configure networking during installation. I plan to use static ip to stay on a private network most the time, but right now I want to quickly get out on the net to get some things..... So I want to get dhcp going and connect to my router to get out.I set up my interfaces file to say:
Code:
auto eth0
iface eth0 inet dhcp
[code]...
i am not aware how to configure pptp and vpn connection ?
View 2 Replies View RelatedI just got a new wireless router (Asus WL-520GC). I can connect to the Internet, but I can't access 192.168.1.1 to configure the router (this is the correct address, according to the manual). It doesn't respond to a ping either.
Code:
$ ping -c4 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
[code]....
The configuration is completely different than any other version of linux i've used.
View 2 Replies View Relatedi just successfully downloaded and installed ubuntu koala (9.10 i think...) and its a great interface. i am just having extreme difficulty trying to set up the wireless connection. when i log back in osx, i am able to access the router and use the internet as i am doing now when i post in the forum. i am just trying to learn how to configure the wireless in ubuntu as well. have someone who has successful been able to connect wirelessly on an imac, or apple laptop in ubuntu.
View 7 Replies View RelatedHow can we configure a wireless network from commandline in Ubuntu?
I understand iwlist will give us the list of access points.
Next using iwconfig it is possible to connect to a wireless network without network manager. connect to a wireless network using commandline?
I have install ubuntu 9.10 on my Dell studio, I have local broadband connection with its user name and password which i use to connect internet everytime i need along with its IP Address, subnet mask, Default gateway, Preferred DNS server. Where should i put all this details to connect internet, i have already tried with Network connection in System -> Preference . It all work well in window
View 9 Replies View RelatedIn WindowsXP I am able to assign multiple IP Addresses to a single LAN Card/NIC Port by clicking "Internet connections> Local Area Connection>Internet Protocol (TCP/IP)> Advanced> Add".
Is there a way to configure an Ubuntu 8.04 LAN connection to use more than one IP address?
cant continue when i install or delete ndiswrapper I got this message:
Errors were encountered while processing:
ndiswrapper-dkms
Setting up ndiswrapper-dkms (1.56-1) ...
Removing old ndiswrapper-1.56 DKMS files..
Deleting module version: 1.56
completely from the DKMS tree.
[Code]...
I have an ubuntu PC with 2 nics, 1 for the internet, the other one should be to connect other computers an analyze the network traffic with Wireshark. How do I configure this 2nd nic to achieve this.
View 1 Replies View Relatedi have tried several methods to connect to internet but nothing has worked
details
ifconfig
eth0 Link encap:Ethernet
HWaddr 00:04:61:5e:ab:9c
[Code]....
I've installed 10.10 server edition on a box I just want to use for file storage/backup, uPnP server, etc. The area I need to put the box doesn't have ethernet as an option so I'm trying to get this wireless NIC configured. It's a Buffalotech WLI2-PCI-G54S which runs the Broadcom 4306 chipset. I've managed to get the drivers for the card installed via the instructions here: [URL]
The drivers are working properly as I can run
Code:
iwlist scan
and see all the wireless networks it detects. I found the info here: [URL] to complete the configuration, but I'm still unable to get it right. My wireless router is configured to use WPA2-PSK with AES. I could just try installing gnome and get the GUI network config, but would like to avoid that if possible.
I'm setting up a home webserver with Ubuntu 10.10 and want to configure the interface to static. I'm using a router, which is setup and working correctly. I have been using linux workstation with dhcp for some time.
I've edited my interfaces file to reflect the parameters for setting static ip, with the exception of 'network'. No matter what I put into this setting, it causes me to loose connectivity to the outside world. I've tried to put my router IP, and my IP set by my provider. What should the 'network' value be?
At this time, my 'interfaces' files only includes the following and has connectivity out to the internet:
Code:
Do I need the 'network' settings as shown in every tutorial (but never explained)?
I try to configure a server at home on Ubuntu 10.04 (French Server)
I have 3 network :
eth1 for lan (IP FIX) 192.168.1.100
ppp0 for a vpn connection on an English Server (IP DHCP)
tun0 for openvpn i use it to connect to my French Server from Anywhere
I draw it here
My problem is when i activate my ppp0 connexion i can't connect tun0 because all port are redirect on ppp0 connexion (i can connect only when i'm on the LAN)
OF course i redirect the port of my IP Public to my French Server IP Private. If i don't activate the ppp0 connexion i can connect to my server with tun0 connexion from everywhere !
So i try do this redirection but it's not working and i don't no why ???
Code:
### Routing acces openvpn et vnc de la connexion ppp0 vers eth1
sudo iptables -t nat -A PREROUTING -j DNAT -i ppp0 -p udp --dport 1194 --to-destination 192.168.1.100
[Code]....
I m new to Linux and I wanna to configure DSL modem wired connection in Ubuntu Please help
View 2 Replies View RelatedI am trying to follow this tutorial below so that I can get Text to the right of icons on the GNOME desktop. [URL] Everything so far has worked fine, except when I get to step 3 where I compile Nautilus. When I try to run the command ./configure --prefix=/usr It tells me bash: ./configure: No such file or directory
View 5 Replies View RelatedI found a tool made for Ubuntu called Xautoclick. I downloaded it and it is called "xautoclick-0.30.tar.gz" The installation notes say "tallatBe sure you have the proper development packages for your distribution installed (i.e. something like xserver-xorg-dev, gtk2-dev, et cetera). After that, run:
./configure make sudo make install" I have no clue what to do... I typed in "./configure" in the terminal and it says "bash: ./configure: No such file or directory?
I have a machine running Karmic sat in the corner of my office. I scp stuff from my mac to it quite a lot over my local wireless network.At the moment, it holds a .sparsebundle backup of my mac created by SuperDuper! (mac backup application) that I periodically transfer over. I'd like to make this system a little more sophisticated and use Apple's Time Machine to automatically backup to my Ubuntu box if possible.
Anyone have any experience of this? I'm kinda hoping for something a bit more straight forward than this: http:[url]....
My father recently installed Ubuntu 9.10 on my new AMD dualcore, but we have not been able to access the net.we tried resetting the modem/router. Windows XP had no problem getting us online - why is it such an issue with Ubuntu?
View 3 Replies View RelatedI tried to configure my vpn connection using pptp from the shell following following tutorial: [URL] now, if i use Code: pppd call novax to connect to my vpn i see following appearing in /var/log/messages:
Code:
Feb 10 21:11:57 reg-laptop pppd[2655]: pppd 2.4.5 started by root, uid 0
Feb 10 21:11:57 reg-laptop pppd[2655]: Using interface ppp0
Feb 10 21:11:57 reg-laptop pppd[2655]: Connect: ppp0 <--> /dev/pts/0
Feb 10 21:11:58 reg-laptop pppd[2655]: CHAP authentication succeeded
Feb 10 21:11:59 reg-laptop pppd[2655]: MPPE 128-bit stateless compression enabled
Feb 10 21:12:00 reg-laptop pppd[2655]: local IP address 10.243.249.22
Feb 10 21:12:00 reg-laptop pppd[2655]: remote IP address 10.243.249.20
verifying with ifconfig, my ppp0 ip is correctly set to 10.243.249.22 - i can also ping this ip but i tried to ping other ips in our network and i can't reach any of them - did i mess up the route maybe? Content of my /etc/ppp/ip-up.d/route-traffic:
[Code]...
I cant configure internet connection.
View 3 Replies View Relatedhow-to configure squid proxy server. I still haven't been able to find a solution. I want to set up squid as a open http proxy server. So people from other networks can connect through the proxy without having to login.Do I have to use iptables to reroute http traffic to squids proxy port? I have forwarded the port in my ISP modem so I know thats working, its the squid config that has flaws or iptables locally.
View 1 Replies View RelatedI have tried various rules, like opening port 53 for the DNS with little success. I finally figured that you need to set the source port to 53 and NOT the destination port.However, I have been unable to figure out what ports apt-get requires. The only way I get it to work is to accept everything in iptables.
View 1 Replies View RelatedI have an MSI Megabook M662. Can't get my wireless working. I have "enabled" checked, but can't view any connections. I don't have wireless at home, I'm trying to make this work for free connections at the library, etc. From the Help Menu troubleshooting I tried:
mag@MSIubuntu:~$ sudo lshw -C network
[sudo] password for mag:
*-network
description: Ethernet interface
[code]...
This reports Disabled, and the advice is to check that device is on. But I just want to roam for service, I don't have my own wireless at home. I thought I might need to use ndiswrapper but I cannot locate a driver for this card info:
lspci -nn 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
What should I try now?
Networkmanager applet does not allow setting ip address manually. The "Apply" button is grey. Is this a bug?
View 3 Replies View RelatedI've looked everywhere and tried everything. All I want to do is set up a static ip with my wireless network interface wlan0.
View 5 Replies View Related