Networking :: Configure VRRP In System?
Jan 31, 2010Can any one tell me how to configure VRRP in Linux or any other link redundant solution for linux?
View 1 Replies
ADVERTISEMENT
Networking :: Name Resolution In Fedora 10 - Configure The System?
Feb 2, 2011I have loaded Fedora 10 in my PC and have configured the network (wired and wireless [Netgear Wifi Adapter] both). But I am able to make the hostname resolution work. configure the system?. I have unsuccessfully tried a lot of things.
View 4 Replies View RelatedFedora Networking :: How To Configure Proxy Settings For Whole System In F12
Nov 24, 2009The problem is that he did not specify exactly where in /etc/profile. I am trying to make a custom spin of F12 but I cannot do it behind the proxy as it is now.
View 4 Replies View RelatedNetworking :: Configure Dynamic DNS In Redhat Enterprise System 5.2?
Dec 14, 2010I am using RHEL 5.2. I want to configure Dynamic DNS on it. Can anyone tell me how to configure Dynamic DNS on RHEL 5.2
View 1 Replies View RelatedCentOS 5 Networking :: Unable To Configure Default Gateway Onto The System
Dec 19, 2010I could not able to configure the default gateway ip address onto the system. i use the route command (" route add default gw 192.xxx.xxx.xxx eth0 ") to add a default gateway onto the routing table but it is "disappear" in the routing table when i had restart the service network.
View 3 Replies View RelatedNetworking :: Unable To Configure Wireless Network On Dell Laptop And Oracle System / Fix It?
May 26, 2010I am a first time Linux user - though I've Unix and Windows experience. So though I can follow your most tech instructions, I'll need some hand-holding.
Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.
Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info, I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).
Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth.
General :: Installing Hudson In Centos 5 - Manage Hudson By Using Configure System And Configure Options?
Aug 9, 2011I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
OpenSUSE :: Configure The X11 System 11.2?
Feb 12, 2010I was just looking today,and it appears that suse 11.2 no longer uses the xorg.conf file to configure certain hardware...(the only thing written to the file is my ATI info) so where would I find what I'm looking for? (I'm specifically looking to configure my synaptics touchpad mouse)
View 1 Replies View RelatedRed Hat :: Configure Yum On System Enterprise 5.4?
Apr 15, 2011Configure Yum (Yellow dog Manager)on RedHat Linux Enterprise .
View 1 Replies View RelatedUbuntu :: Configure Coriander On 32-bit System (v10.04)
Aug 26, 2010I've been trying to configure Coriander on my 32-bit system (Ubuntu v10.04), but I've run into an issue that I've only found discussion boards for in French, a language I'm nowhere near fluent enough in to translate on a tech forum. When I run the ./configure command in the coriander folder, things run fine. Everything configures normally, and I move on. But then, when I run 'make', it runs a few lines making folders, and then this error message pops up:
In file included from coriander.h:92,
from main.c:24:
conversions.h:26: error: expected declaration specifiers or ... before SDL_Overlay
make[2]: *** [main.o] Error 1
[Code]....
General :: Configure A File To Fit With System
Oct 7, 2010I need to use MFix a open source program Therefore, because i don't have Linux on my computer i use Cygwin_NT-5.1 the latest version. From the help desk they told me that i need to configure a file to fit with my system. I just changed operation system to CYGWIN_NT-6.0 (instead of the command uname -s ; set opsys=$1. this was the only way i had an idea to do it, so i tell the programm that my sytem is a 6.0 but it isn't
then i wanted to install mfix and it gives me the error
../../model/make_mfix: line 119: syntax error near unexpected token '('
../../model/make_mfix: line 119: 'echo -n "Do you need debug version? (y/n) [no] "'
by looking in he make_mfix file it looks like this echo -n "Do you need debug version? (y/n) [no] "
General :: Configure System To Use Theme In X For Program?
May 7, 2010My program (GTK) runs in Linux (Ubuntu) without any problem and its themes are fine but when I change my system to run just X and then my program, it runs but without any theme. How can I configure my system to use theme in X for my program?
View 2 Replies View RelatedUbuntu :: Unable To Configure Quota System?
Sep 2, 2010I am trying to enable quota on my /home directory for understanding how quota works. I have not made a separate partition for my /home. The logical name of the directory "/" is /dev/sda5 on my machine
[Code]...
I tried to search this on Google as well but didn't get any satisfactory results. I usually post questions only when I have do not get results by checking earlier threads on various forums. If you find I am going the wrong way then please show me the right track.
Ubuntu :: Configure Accpac Workstation In System?
Mar 25, 2011How to configure ACCPAC ACCOUNTING SYSTEM IN Ubuntu 10.04 or above.
View 2 Replies View RelatedApplications :: Install And Configure Subversion On System Box?
Apr 30, 2010I want to know how to install and configure subversion on linux box. if it new subversion version
View 1 Replies View RelatedGeneral :: How To Configure System To Make Connection
Apr 11, 2011Its very easy to make DSL connection in the windows operating system.But I do not know how to configure my system to make connection on Linux.Anyone can suggest me what type of modem and router i should have to use to make a connection on the linux.If there any commands to make connection then mention it.
View 2 Replies View RelatedRed Hat / Fedora :: Configure Webalizer On A CentOS 5.5 System?
Sep 14, 2010I have been trying to configure webalizer on a centOS 5.5 system.I did the yum install and I found this helpful link...[URL]..However when I try to change the dir it puts the info into, it keeps giving me an error cannot cd to the directory. I changed the /etc/webalizer.conf file as described in the above article and try to run it manually same results.
/etc/cron.daily/00webalizer Error: Can't change directory to /home/webalizer/ When I put the original dir back in the path it writes to /var/www not /var/www/output like it should. I even tried a local /var/wwww/output dir. Then I tried a link to /home/webalizer/output (a dir I created) and same results.(with orginal .cfg in place) I go to my www page remote or on the local network I get page not found errors. http://mysite.com/webalize or 192.168.1.80/webalizer page not found.
In summary.
1. Why wont the /etc/webalizer.cf file allow me to change the location of the files?
2. How do I display the www page to view the data?
3. How can I secure the www page so only I can view the data.
just saw this in my email too :
header info deleted...
/etc/cron.daily/00webalizer:
Error: Can't change directory to /home/webalizer
/etc/cron.daily/logrotate:
Current logging target is:
`- SYSLOG
edit: i should also mention SeLinux is in permissive mode not enforcing while i am testing this.
CentOS 5 :: Install And Configure X Window System/KDE?
Jan 25, 2011I've got CentOS 5.4 without access to internet (install all from DVD).When I try ti run Eclipse via remote desktop I've got error:
Quote:(.:30196): GLib-GObject-WARNING **: invalid (NULL) pointer instance
(.:30196): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
[code]....
Fedora Installation :: How To Configure System To Interpret PHP Script
Jul 8, 2009I used to configure and run PHP script in Redhat Linux System for a long time ago. Now I forgot almost everything in Linux. I downloaded and install Fedora 11 Live CD. Start httpd service(Appache). It does work with html but not PHP script. And I can't remember how to configure the system to interpret PHP script.
View 13 Replies View RelatedGeneral :: Configure System To Act As A Bluetooth RFCOMM SPP Server?
May 18, 2010I'm writing a phone app for Android that connects to a bluetooth RFCOMM device in my car. My phone app talks AT commands with it. For development work, I often need to communicate with the device to try different commands and things.
My neighbors are starting to think I'm weird because I sit in my car for hours on end with my laptop screen shining on my face, typing away like a script kiddie.
I'd much rather configure one of my many Linux servers to act as a bluetooth RFCOMM device and allow me to connect to it (indoors, while I sit on my couch).
I imagine I have to start with something like
sdptool add SP
But then what?
I'm perfectly happy writing a perl app to handle the I/O, but I just don't know how to make the bluez stack accept connections and subsequently pipe that stream to a perl app.
Ubuntu Security :: Setup And Configure Snort 2.8.5.2 On A 10.10 System?
Dec 11, 2010does anyone know of a good tutorial on how to set up and configure snort 2.8.5.2 on a ubuntu 10.10 system.I have been trying to set up snort and have run into alot of problems setting up the config file and the rules. It works in sniff and packet log mode but i cannot seem to set up IDS mode correctly. There is alot of different info on the net but not much help. There seems to be alot of work involved in setting this up which i do not mind provided i can find the proper documentation to configure the set up.
View 9 Replies View RelatedHardware :: FC6 - Unable To Configure System Sound Card
Mar 27, 2009I am using FC6 on my system, I tried to configure the soundcard using, system-config-soundcard utility. But once I type system-config-soundcard from my shell, it doesn't start at all. However its not showing any error also. What can I do next?
View 1 Replies View RelatedGeneral :: Unable To Configure System For Dual Boot
Jan 8, 2011I am new Linux, but have already installed a new HDD in my PC and successfully installed Fedora 14. Unfortunately, I am unable to configure my system for dual boot and my PC always boots right up into Windows Vista which is the original OS on my original HDD. I have searched the web, but only find examples of splitting partitions and dual booting into different versions of Windows. I apologize for the simple question, but I am certain that someone in here can point me in the right direction. My intention is to migrate to Linux entirely, but want to learn Linux before completing a full migration.
View 4 Replies View RelatedGeneral :: How To Configure Network(internet) In Scientific System
Apr 3, 2010I am using both suse linux and scientific linux 4.6. my ether net card is RTL8111/8168B PCI Gigait.In suse i can configure internet and its working fine.
1. How to configure network in scientific linux 4.6 ? which driver should i install ? i don't find any driver corresponding to to this Ethernet card.
2.how to configure epiphany web browser in suse 11.0 ? it is not working.
General :: Configure X And Adds Fonts To Its Window System?
Aug 9, 2010I'm having some difficulty to confgure the windows X manager...
I can't find /etc/X11/xorg.conf
I'm trying to do this in opensuse 11.1 and fedora 12
I tried to install in fedora yum install system-config-display but I think that isn't the best thing to do...
And can anyone tell me a distribution that use XFree 86.4.4.x?
Opense suse, Fedora and Ubuntu use X.org-X11 isn't it?
Server :: Configure Vsftpd With Virtual And System User?
Jul 6, 2011Can some one help me to configure vsftpd with Virtual and System user
View 37 Replies View RelatedSoftware :: Configure Internet Connection In System Ubuntu?
Sep 12, 2010How to set up internet сonnection in ubuntu...I have TCP / IP connection through the network card
View 9 Replies View RelatedSoftware :: GUI To Configure Apache For System Stuff Like ReverseProxy?
Jun 12, 2010Is there any GUI to configure Apache for linux stuff like ReverseProxy etc taken care by it.Doesn't seem many.
View 2 Replies View RelatedSlackware :: Configure System To Start Wlan0 Instead Of Eth0?
Nov 29, 2010I'm running Slackware-13.1 on my laptop. Connection to my network is via wlan0, a cable in most cases not pluged in.When starting the system the first attempt to configure the network is via eth0, which ends with dhcpcd timing out since there is no cable pluged in. Afterwards wlan0 is set up properly.
I have installed ifplugd, which is a daemon who connects to ethernet only if a cable is connected. With Gentoo this works out of the box. With Slackware ifplugd is started after rc.inet1 (probably). So the the system still tries to connect via ethernet before connecting to the wireless network.
I have also installed wicd.How can I manage that wlan0 is prefered over eth0?I noticed that neither wicd nor ifplugd belong to the default full installation of Slackware and therefore assume, there must be a solution which meets my requirements without even one of both programs.The laptop is only used at home. Wireless connection is normaly used. I need eth0 only in a case of emergency.
CentOS 5 Server :: Configure Global File System?
May 17, 2010I need to enable GFS for a shared storage file system, I need to share it to different ip's so that every one get syn data on that file system
ex : /data on 192.168.0.10
I need /data to be in GFS and need to share to 192.168.0.20 & 192.168.0.21
so that this two machines can have sync file system
/data is in shared storage
