Ubuntu Networking :: Sharing 3g Connection On 10.04 And Vista Via Router?
May 28, 2010
i'm totally new to Linux and Ubuntu. I own a huawei 3g modem through which I connect to the internet. I plan to share the internet from that connection between my Vista pc and another pc running Ubuntu Lucid Lynx. The computer I plan to use to share the internet, let me call it Server, is equalling running Ubuntu Lucid Lynx. My Server perfectly recognises my modem and connects to the internet using it and I can browse.
I plan to connect the routers internet port to my Server using my servers network card. Then i intend to let the router do the sharing of the internet to the other computers on its own. I don't have any idea how to go about doing this. Originally, I tried a direct connection between my Server and the other pc running Lucid Lynx without bothering with the router and using the following settings which i found on an online tutorial:
Server ip 192.168.0.1
netmask 255.255.255.0
and no gateway
then on the client
client ip 192.168.0.5
netmask 255.255.255.0
gateway 192.168.0.1
I used open DNS servers for the DNS
However, i was unable to browse the internet from the client even though a connection between the two was established. Then I thought to myself, why go through this trouble, I have a router so why not go ahead and use it. But then I do not know how to do that. Using the router will enable me to effortlessly connect all my computers irrespective of operating system and ease the network creation process.
View 5 Replies
ADVERTISEMENT
Oct 25, 2010
ubuntu recognizes the router im using that goes to my ps3 but for some reason i cant link the router to my internet connection.
View 1 Replies
View Related
Jan 1, 2011
I have internet access through 3G/4G USB dongle direct into my Ubuntu 10.04 box. Works great! Now I would like to share this connection out through my Netgear WGR614 wireless (and wired) router. Any clues? I've tried the simple (GUI) instructions using Network Manager, but just can't seem to get it right. Previously, I had DSL and this plugged nicely into the WGR614 and internet and ethernet access was had by all. Now, I'm a bit confused on how to get the sharing (ethernet and wireless) between my Ubuntu box and the wired/wireless network while at the same time getting Internet access to all through the Ubuntu box.
View 2 Replies
View Related
Apr 19, 2011
I have two laptops connected to each other with a crossover cable. One laptop runs vista and has internet connection sharing enabled and the other laptop has a new installation of ubuntu server 10.10.
The LAN network device is configured as 192.168.0.1 and is on subnet 255.255.255.0.
The ubuntu network device is configured as 192.168.0.1, is on subnet 255.255.255.0, and uses gateway 192.168.0.2. Those are the values that I entered in /etc/network/interfaces.
The laptops are able to ping each other but I am not able to connect to the internet on the ubuntu machine. Am I missing something here? I did
Code:
sudo /etc/init.d/networking restart
and also rebooted the ubuntu machine but no luck. I am unable to update apt-get.
View 1 Replies
View Related
May 23, 2010
I have a mobile broadband usb modem that I get my internet connection from, and I would like to share this connection through a router that is connected to the same computer via ethernet. I'm running Ubuntu 9.10.
View 8 Replies
View Related
Mar 7, 2010
Trying to set up network sharing between Ubuntu 9.10 and Vista. I already did this with a wired Ubuntu 9.10 desktop and my Vista laptop but for some reason my Ubuntu 9.10 wireless and Vista wireless aren't as easy. They are all on the same workgroup "MAGIC" and I can see my ubuntu shares on the Vista computer but can't see the Vista shares on the ubuntu computer. In ubuntu I go to network>windows network>MAGIC but it times out at the MAGIC workgroup part and says 'unable to mount'.
[URL]
but no luck I also checked and there isn't a firewall that's in the way.
View 3 Replies
View Related
Nov 24, 2010
After a reinstall of 10.10, I am able to turn on file sharing and so I set up a shared folder.
Windows Vista can see this folder but in my network place, there is only one icon, and it's a "Windows Network" icon. Upon clicking on that, I can see the local network, "Rompus Room".
When I click on Rompus Room, nothing happens for a while, then I get a message saying, "Opening "ROMPUS ROOM". Then I get the final message, "Unable to mount location", followed by, "Failed to retieve share list from server"
View 3 Replies
View Related
Jul 28, 2010
I'm trying to do a SSH connection between my home and work PC both machines are running ubuntu 10.04. I have read all the comunity documentation at [URL] from Work PC. I went on to the web site what is my ip address and noted down the number, From Home i opened a terminal and typed: pnig (ip address). to which their was no reply, now i'm assuming i need to configure the works router to except connection requests, is this Correct?
Also what information do i need from my works network and how do i get it? I understand that I need the routers expernal ip address, but how do i referiance a specified computer after that address? What program do i use in ubunu and how is that information applied to it?
View 4 Replies
View Related
May 18, 2010
I use Opensuse 11.2 & Edge/Gprs Modem to connect Internet.I configured /etc/wvdial.conf & /etc/resolv.conf. Now I can connect Internet using this command "wvdial MYNET" in terminal.Now I want to share my internet using Lan card & Netgear Router. If i connect my PC with Router using wire & change option ON BOOT find this device in ifup then it'll show in ifconfig command.
My Router IP : 192.168.0.1 & It gives my PC an IP automatically : 192.168.0.2
I can ping my router.. even I can browse Router Admin page in browser. No problem there.But now If i want to connect my net using wvdial command... net connected... but no data passing!!! If i disable Lan card in ifup then Edge/Gprs net connection again OK!
View 9 Replies
View Related
Mar 19, 2011
For my broadband Internet I have several computers connected by cable to a Netgear DG834Gv5 router which has its own firewall.I have the wireless turned off by choice.My desktop and laptop are Linux only. (Ubuntu lucid lynx) I use the same username and password (very strong password) on both.What I want to know is can I set things up so I can browse and copy files between the computers using say nautilus on either computer?if not nautilus then I would happy to be able to do the same via a terminal window.I am not necessarily wanting to be told how but either what to Google for or where to find it.
View 2 Replies
View Related
Jun 14, 2011
I have done the ICS in my ubuntu 10.10 according to this article using eth0 connecting to wan router and eth1 connecting to the lan switch. Everything works fine.I have an open vpn connection which have full tunneling through the server. I want the vpn connection to be shared on the lan, and every internet connection will go through the vpn server. If I change the eth0 to tunnel adapter in iptables forwarding rule, will it work?
View 2 Replies
View Related
Feb 5, 2010
I am using Ubuntu 9.10 and trying to use Internet Connection Sharing through my Dell Mini 9 laptop.
The incoming internet is from wireless The outgoing internet is from Ethernet I am using a crossover cable as I have heard this is necessary I followed the 9.10 method on my Auto Eth 0 connection Here is a link to the Ubuntu Documentation I used The computer I am trying to share to does not pick up the internet being shared from the cable.
View 7 Replies
View Related
May 10, 2010
I need to share internet from my dsl connection to laptop (who is using windows) through my wireless usb d-link gwl-122. How to do that?
View 1 Replies
View Related
Aug 4, 2010
I want to use the wifi card in my laptop to share my internet connection to my Android Phone.Android phones don't support Ad-hoc networks yet (maybe not ever) so I need to the shared network in Infrastructure mode not ad-hoc mode.Using Ubuntu 10.04, If I click on the NetworkManager Applet ( 0.8 ) and select Create new wireless network, it will create an ad-hoc network, I then tried changing this to infrastructure, but it didn't work.Is there some way of modifying this created network to make it appear as infrastructure, or alternatively create a shared internet connection in infrastructure mode?
View 2 Replies
View Related
Mar 5, 2009
A friend of mine is trying to setup internet connection sharing in Ubuntu, which is something I've never dealt with before. Here's the situation:One desktop PC is dual-booting Ubuntu and Vista. This box is connected wirelessly to the router and can access the internet just fine. The desired setup is to have an xbox360 connected (wired) to the desktop PC, allowing it to share the internet connection.
1) A crossover cable would need to be used between the desktop PC and the xbox.
2) The xbox would still have the router's internal IP as the default gateway (I have zero experience configuring networking on an xbox... I hope these options are easily available).
3) The internal IPs can all be on the same network (i.e. router = 192.168.1.1 ; desktop = 192.168.1.100 ; xbox = 192.168.1.101)
4) IP forwarding would need to be enabled on the Ubuntu host
Is there anything I'm overlooking or just oversimplifying, or should that just about do it?
View 1 Replies
View Related
Jan 9, 2010
I have a 100MBit connection and previously when I used vista I had no problem downloading files at 100Mbit with my vpn provider. Hower the PPTP vpn connecion I'm using on ubuntu seems to be capped to 10 MBit.
View 1 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Jan 27, 2010
I've got wired connection on my ubuntu and I set up a wireless network so I can share internet with other computers. I added another computer to the network, but it's asking for:
* an IP address
* router address
* subnet mask.
Where can I find these values?
View 3 Replies
View Related
Feb 5, 2010
At my home I am using firestarter to connect my XBOX 360 to the internet and it works perfectly, never crashes etc and I get a moderate NAT which I've never experienced any problems in having.
I have my devices set up like this
eth0 - ifconfig eth0 192.168.2.1 netmask 255.255.255.0 broadcast 192.168.2.255
XBOX - 192.168.2.10 netmask 255.255.255.0 broadcast 192.168.255 gateway 192.168.2.1
This configuration works perfectly on my router at my house which has the IP of 192.168.0.1
However at my friends house he has a router with the IP adress of 192.168.2.10 or 192.168.2.7*, I don't remember exactly but I'll find out tonight. I have tried changing my IP settings on my xbox and eth0 to no avail. I noticed instantly that the XBOX IP is the same as my friends router. what the new settings would be, or simply changing the router's IP.
However there is also an issue with the DNS servers. I can't find them anywhere on the router or on the router box itself. I heard that I could point it towards my default gateway however.
View 2 Replies
View Related
Feb 18, 2010
How to share internet between two ubuntu PCs via bluetooth?
I have a Desktop and a Laptop. Their Configuration is as below:
Desktop:
Laptop:
Internet Connection: I want to use my desktop internet connection via blutetooth for this computer.
So the question is that how to share internet connection between these two Ubuntu computers via Bluetooth?
Remember that:
I've seem that HOWTO about connecting ubuntu PC to internet via mobile phone. I don't mean that!
View 3 Replies
View Related
May 4, 2010
i have an evdo connection with which i connect to the internet. i have been trying to share this connection for quite a few days from my lucid machine to a windows 7 pc but have failed. i have tried dhcp3-server, firestarter, network manager's built in capabilities but have failed! today i manually configured da windows 7 pc to an ip address within da range which network manager ws assigning when 'shared to other computers' ws selected and it worked! Now da question is how do i do it automatically? dhcp3-server never starts, it always fails with the error 'not configured to listen' or sumthng like it! Plus i want the wireless of my laptop to make an ad hoc connection to my mobile fone, which is also no possible...i think its some problem with da dhcp server.
View 1 Replies
View Related
Jun 20, 2010
I'm trying to share the internet connection of my Windows XP Virtual Machine (virtualbox) to Ubuntu. I know it sounds weird, but what happens is that i'm using a 3G modem to connect to the internet and 3G connections are still very unstable with ubuntu's network manager. Fortunately, the modem works a lot better with my Virtual Machine. I have already set up a "host only" network between my Windows XP guest and my Ubuntu host and i can they can ping each other but i still can't share the connection of my virtual machine. I already selected "share this connection" on win xp but i think i still have to configure something on ubuntu for it to work. The interface Ubuntu uses is vboxnet0 (not eth0).
This is the last thing to do before i can get rid of my Windows XP partition
View 3 Replies
View Related
Jul 25, 2010
May I ask if I can share my mobile broadband connection via Wifi?
View 2 Replies
View Related
Jul 31, 2010
i have searched and searched for an answer but nothing i've found has worked for me what i have is an old computer with 2 network cards in it the 1 conected to the internet is eth1 one connected to the xbox via crossover cable is eth2, what i'm trying to do is share the internet connection to the xbox using ubuntu,i've tryed alreadyusing the network manager,using firestarter,ip tables,even nat,and all have failedi've been using ubuntu for 4yrs now, and i have always before been able to find answers to my problems by simply googling the answer. but this is one i can't seem to find an answer on.
View 3 Replies
View Related
Aug 4, 2010
Here's the setup:
I have 2 laptops:
1. Dell Inspiron 8600 with an intel 2200BG wifi card (Ubuntu 10.04)
2. Asus eeePC 1000 (Ubuntu 9.04)
Internet setup:
Laptop 1 connects to a 3G connection and shares it with laptop 2 using an ad-hoc network.
I upgraded to Lucid on Laptop 1. Prior to the upgrade everything was working. Now, when laptop 1 tries to connect to the ad-hoc network it almost immediately disconnects and tries to reconnect again.
Ad-hoc network settings:
The ad-hoc network uses a WEP key. In IPv4 settings, "Share to other computers" is selected.
Dmesg output:
Code:
are: requesting ipw2200-bss.fw .....
** (nm-applet:4259): WARNING **: _nm_object_get_property: Error getting 'Default' for /org/freedesktop/NetworkManager/ActiveConnection/327: (19) Method "Get" with signature "ss" on interface "org.freedesktop.DBus.Properties" doesn't exist
** (nm-applet:4259): DEBUG: going for offline with icon: notification-network-wireless-disconnected
View 9 Replies
View Related
Nov 18, 2010
configuring Internet Connection Sharing from my Ubuntu 10.10 machine to a Windows XP machine. I've seen How To's but they didn't work, yet.
The Ubuntu machine connects to the Internet through a DSL USB modem that required packages not provided with the distribution, and specific instructions to configure it; so getting Internet working alone was difficult. As a result, I don't even use Network Manager, rather connect using the command pppoe-start. The machine is connected to the Windows PC through a simple cable, through the Ethernet card.
Some tutorials I've seen on ICS are for machines with two Ethernet cards, or for wireless connections; but I've seen none for a USB modem. However I once found one, years ago, and it worked, but I couldn't find it now. It was using iptables, and I didn't really understand what I was doing, but it worked. But then I had to format the disk, and now I can't find a way to get it working again.
View 8 Replies
View Related
Dec 9, 2010
I have a laptop with Easy Peasy / Intrepid Ibex connecting to internet through wifi (firewalled VPN), a PC with Windows 7, and a crossed ethernet cable to connect them. How can I get Internet on the PC? I tried to connect them but I can't even ping each other!
View 3 Replies
View Related
May 30, 2011
i connect to the internet on my laptop using a usb modem. i want to share this connection with other computers. connected through lan cable. i want to manually assign ip on all computers. what should i do
View 3 Replies
View Related
Jul 25, 2011
I have a modem connected to my router (pfsense on 192.168.1.1) which is then connected to a wireless AP (192.168.1.253). A number of PCs pick up the wireless and all is well.I've just received another broken PC that I've kicked into life and was going to run a FreeNAS box with it to back up a number of the PCs on the network. I've actually hooked this up via ethernet to my "server" PC (192.168.1.125 on its wlan NIC). Its all set up so that the server eth NIC (10.42.43.1) is connected to the FreeNAS box (10.42.43.2) and the FreeNAS box can ping both interfaces of the server, the router and the net, and any other box on the 192.16.1.x network. The problem is that I can't for the life of me get any of the 192 boxes to ping the FreeNAS box. I'm presuming its a routing / gateway issue with the server box but being pretty damn hopeless with these things I've been stumbling about breaking things.
View 5 Replies
View Related
May 10, 2010
I have fedora12 installed on my old laptop. I would like to use it as a wireless router so that I can use my new laptop without wires. The old laptop will be wired connected to the internet. I have already tried creating a wireless ad-hoc connection with the Network Manager and I manage to connect to the internet with my new laptop but only if I don't use any protection. If I want that connection to use WPA or WEP-128 it doesn't work!
View 10 Replies
View Related
