Networking :: Atheros Error "set Encode" (AR9285). Can't Set An Encryption Key
May 28, 2010
I keep getting the following error when I run the following:
Quote:
# iwconfig wlan0 key s4ssw0rd Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid Argument
No matter what method I try for setting an encryption key for my card, it doesn't work. I am only able to connect to wireless access points that don't use encryption.
details: I have an Atheros AR9285 wireless card, I have the mac80211,ath9k modules loaded. Also when I run lspci, my Atheros AR9285 card shows up on the list. I am using the 2.6.30.9 kernel.
View 4 Replies
ADVERTISEMENT
Nov 3, 2010
I'm facing problems with Fedora13 and the AR9285 wifi card... the connection is just too slow, and the wired connection works fine. I just figured out that a lot of VAIO users (so am I) were in the same situation, and solved their problem by downloading ath9k drivers from linuxwireless.org. Fine, I did it! That's what I found :
Quote:
Building and installing
cd /path/to/compat-wireless-2.6.32-rc5
./scripts/driver-select <driver-name>
make
sudo make install
...but make is looking for source files in /usr/src/kernels/2.6.34-7-61.fc13.x86_64/build/ , which doesn't exist! The /usr/src/kernels/ folder is just empty. I also found something about the fact that Fedora13 didn't came with kernel's source files... So how can I install that driver? (I didn't find the package via yum...)
View 5 Replies
View Related
Nov 12, 2010
I've been trying to install the network adapter for the ar9285 driver using compat-wireless-2.6.32.16.tar.bz2 found at [URL] The commands I run after extracting are:
cd ~/Desktop
cd compat-wireless*
scripts/driver-select ath9k
Then after typing scripts/driver-select ath9k. This happens:
Processing new driver-select request...
Backing up makefile: Makefile.bk
Backing up makefile: drivers/net/wireless/Makefile.bk
scripts/driver-select: line 73: perl: command not found
[code]...
View 1 Replies
View Related
Mar 30, 2010
I bought this new computer with an Atheros AR9285 wireless adapter, signal dropped out after a couple of minutes, sometimes reconnected, I looked up different posts on [URL] and [URL].
First I installed linux-backports and linux-backports-wireless, still dropped. Then I installed compat-wireless-2.6.33 and it still dropped. Finalley I blacklisted the driver with gksu gedit /etc/modprobe.d/blacklist-ath_pci.conf and it still drops. What should I do, it seems to pick it up again after 30 sec or so, but it a bit frustrating.
P.S.: It seems to be getting much better now that I have the torrent program shut down.
View 1 Replies
View Related
Nov 5, 2010
I've a big trouble that curses me for months. I've an Asus K52Jc laptop with wireless card Atheros AR9285, Ubuntu 10.10 and this network set-up: a WDSL (so an antenna on my house) wired to a switch; the switch shares connection through 2 ethernets cables: one to my uncle house, one to my router Netgear DG834v5.If I connect my laptop via ethernet, internet works good, if I connect to my router, wireless works (I can ping my router), but no internet. I've been helped a lot in official ubuntu chat: after some tries we understood that the problem aren't drivers, isn't Netgear, but probably it's something messed up in routes or arp cache.Anyway note that I have also some difficulties to ping my router, on 3 tries he often loses 1 or 2 packets.
[Code]...
View 9 Replies
View Related
Feb 5, 2011
I am kind of new to linux and have installed the lucid lynx ubuntu distro (10.04) and then "upgraded" it to ubuntu studio but it still says is the lucid lynx. I got a Samsung Q430 laptop with the Atheros AR9285 wireless adapter.I have everything up and running EXCEPT my wireless card. The wireless card DOES work, it does see all the connections available, but when I choose to connect it does not, and keeps asking for the password.
Weird thing is that when I use my samsung galaxy tab as the wireless adapter for its 3G signal, it does seem to work fine (although really slow). I have tried looking for a solution, some say to just install the drivers, but ubuntu does not recognize anything to need a driver except the video card. I have installed linux-backports-modules-wireless-lucid-generic I have also tried the bleeding edge drivers.
After a while of experimenting by myself I came with the following, somewhat rudimentary. I managed to fix the problem by installing the windows wireless driver utility. Here is a tutorial on how to do it. So I just installed it, went to system/administration/windows wireless drivers and just installed it. Downloaded the file from here [URL]. It may not be the best way to fix it, but it does work. Still if you can use ethernet, don't hesitate to do it.
View 9 Replies
View Related
Nov 8, 2010
I recently got a Samsung NF310 netbook. It has a Broadcom 802.11n wireless card, which is not very well supported currently. In order to have reliable wireless, I switched it out with an Atheros AR9285 wifi card. The Atheros card seems to be invisible to the system. It doesn't show up in the output of lspci, and I can't find anything weird in dmesg. It's like it just doesn't exist.
At first I thought the card was just dead, but then I tried it out in my old EeePC900 and it works fine. I know the slot on the the NF310 is OK, because the original Broadcom card still works. I also determined that the NF310 isn't doing some BIOS weirdness to only us the Broadcom card, because my AR5BXB63 802.11g card works in it. (Unfortunately it's a full-length footprint, and the NF310 has a half-length Mini PCIe slot, so I can't leave it in there.)
The NF310 is running Maverick. The EeePC identifies the wifi card as:
Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Anyone have any ideas what I should try next?
View 1 Replies
View Related
Aug 12, 2009
installing my wireless card Atheros AR9285.I have tried to get it working with both compat wireless - Ath9k driver but I dont know exactly how to do.I have also tried to get it to work with ndiswrapper, but it is really tricky because nothing is available in centos like precompiled ndiswrapper.I used to work with Arch Linux so everything in Centos is totally new to me and I don�t understand a thing:I need to get it to work as soon as possible.What I have read the should go to just "activate" the ath9k driver with my card and it would work,
View 3 Replies
View Related
Mar 13, 2010
I have a Samsung N150 netbook with Atheros AR 9285 WiFi card. I installed Ubuntu 9.10 on it, although this problem happens on other distros too (Network Remix 9.10, OpenSuse 11.2) My wifi card and networks get detected. The problem is when I try to connect to my network, which is protected by WPA key (I don't know if it matters whether it's WPA or not). After I input my network key, the network manager is trying to connect, but obviously cannot, because just prompts me for password again. I can connect without problems to this network from my other computer running WinXP
View 3 Replies
View Related
Jun 29, 2011
I need to change my network key number in my router, because I think it is beening used by a near neighbour in the apartment above, can anyone tell me how to do this.
View 3 Replies
View Related
Jan 12, 2011
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies
View Related
Nov 1, 2010
When I run the following GET commad:
./snmpget -m ALL -M /data/net/naamab/snmp/snmp_mib/ -v 3 -a MD5 -l authPriv -u test1 -A welcome1 -x DES -X privpass 127.0.0.1 NOVELSAT-MODULATOR-MIB::nsModLineCMMode.0 -d
I get the error:
Encryption support not enabled.
snmpget: USM encryption error
I have defined a user (and user, view and access) that should work with encryption:
snmpd.conf:
createUser test1 MD5 welcome1 DES privpass
group debugGroup usm test1
view debugView included .1
access debugGroup "" usm priv exact debugView debugView none
General details:
I am using net-snmp on linux embedded
version 5.5
Configuration (part of it):
./configure --target=mips64-octeon-linux-gnu
--build=mips64-octeon-linux-gnu
--host=i686-pc-linux-gnu
message dump:
Sending 64 bytes to UDP: [127.0.0.1]:161->[0.0.0.0]
0000: 30 3E 02 01 03 30 11 02 04 1D 23 6A FA 02 03 00 0>...0....#j....
0016: FF E3 04 01 04 02 01 03 04 10 30 0E 04 00 02 01 ..........0.....
0032: 00 02 01 00 04 00 04 00 04 00 30 14 04 00 04 00 ..........0.....
0048: A0 0E 02 04 4C 08 7B B5 02 01 00 02 01 00 30 00 ....L.{.......0.
Received 118 bytes from UDP: [127.0.0.1]:161->[0.0.0.0]
0000: 30 74 02 01 03 30 11 02 04 1D 23 6A FA 02 03 00 0t...0....#j....
0016: FF E3 04 01 00 02 01 03 04 24 30 22 04 11 80 00 .........$0"....
0032: 1F 88 80 2D 53 AF 7D 00 00 00 00 00 00 00 08 02 ...-S.}.........
0048: 02 02 CF 02 03 01 11 C5 04 00 04 00 04 00 30 36 ..............06
0064: 04 11 80 00 1F 88 80 2D 53 AF 7D 00 00 00 00 00 .......-S.}.....
0080: 00 00 08 04 00 A8 1F 02 04 4C 08 7B B5 02 01 00 .........L.{....
0096: 02 01 00 30 11 30 0F 06 0A 2B 06 01 06 03 0F 01 ...0.0...+......
0112: 01 04 00 41 01 09 ...A..
View 1 Replies
View Related
Jul 12, 2010
we have postgresql database in our server. when i tried to install our application it throws some error like "org.postgresql.util.PSQLException: ERROR: encoding UTF8 does not match locale en_US Detail: The chosen LC_CTYPE setting requires encoding LATIN1". the locale which is set in our server is
[code]...
I don't know how to approach to solve this error.
View 1 Replies
View Related
Jan 1, 2011
Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
View 1 Replies
View Related
Aug 25, 2010
I have a Toshiba NB300 netbook that has an Atheros AR9285 wireless chipset and is running Ubuntu 10.04 Lucid Lynx. At my University there is a FreeRadius authenticated wireless network (called "UCC") that I would like to connect to. Using NetworkManager I have created an automatic profile called "Auto UCC" that contains my user details for the connection. When attempting to connect to the network, the NetworkManager icon spins for a couple of minutes and then presents me with the authentication dialog. If I re-enter my details (and disable the CA cert prompt), it repeats the process seemingly infinitely (spin-spin-spin, auth box) Attached is a copy of the syslog from first attempting to connect to stopping the connection attempts. The wireless card's 'lspci' line is
Code:
07:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
View 1 Replies
View Related
Apr 26, 2011
I had U10.10 installed prior to running U10.10 Desktop, and the wlan worked flawlessly on that.My understanding is that the packages are the same and so this should be installed with Desktop, however it will not action the final connection. The wlan is finding networks and prompts for the Key when connecting, but it never actually connects.
Quote:
sudo lshw -C network
gives the following:
Quote:
*-network
[Code]...
View 1 Replies
View Related
Dec 23, 2010
I am building an active directory and using BIND9 as my DNS. To allow for secure dynamic updates from the domain, I am enabling GSS-TSIG as detailed here and here. Unfortunately, some of the commands and configurations used here seem to be depreciated, at least in the newer versions that I'm using. My issue is one of keytab encryption. I generated a keytab using ktpass.exe on the Windows Server 2008 domain controller. I have tried DES/MD5, AES128/SHA1 and AES256/SHA1, each have been turned down by ktutil on the kerberos server (FreeBSD). Each time, it outputs the following error: ktutil: AES256/SHA1*: encryption type AES256/SHA1* not supported *Respective to encryption used.
I cannot find a list of suitable encryption schemes that ktutil will accept. The FreeBSD handbook details a means of producing a keytab file, but I'm not sure how to configure the Domain Controller to use the keytab.
View 1 Replies
View Related
Oct 17, 2010
How do I install the correct driver for my Ubuntu 10.10 system for the AR9285 wireless card? code...
View 2 Replies
View Related
Mar 14, 2016
I made the debian installation 8.3 more adapters wi fi and cable do not connect to the network ... How I could solve this?
View 0 Replies
View Related
Sep 22, 2010
I tried to compile Atheros AR8152 PCI-E Fast Ethernet Controller driver for fedora 13 64 bit kernel version is 2.6.34.7-56.fc13.x86_64. I have installed kernel source , kernel header and necessary all things to compile it. (linux-firmware-20100806-4.fc13.noarch also installed). I tried AR81Family-linux-v1.0.1.13 source from Atheros web site.
But when I try to make it it give following error.
Code: Makefile:173: *** *** Aborting the build. ***
This driver is not supported on kernel versions older than 2.4.0. Stop. It is not compiling issue because I compiled and installed broadcom wireless driver.
Makefile is attached here (renamed as Makefile.txt -> Makefile)
View 5 Replies
View Related
May 25, 2010
When I use evolution to encrypt an email I get the following error
Code:
could not create message
Because "gpg: writing to `-'
gpg: DSA key AC806A0E requires a 256 bit or larger hash
gpg: signing failed: General error
", you may need to select different mail options.
Information:
Code:
# gpg --version
gpg (GnuPG) 2.0.12
libgcrypt 1.4.4
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later [URL]
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Home: ~/.gnupg
Supported algorithms:
Pubkey: RSA, ELG, DSA
Cipher: 3DES, CAST5, BLOWFISH, AES, AES192, AES256, TWOFISH, CAMELLIA128,
CAMELLIA192, CAMELLIA256
Hash: MD5, SHA1, RIPEMD160, SHA256, SHA384, SHA512, SHA224
Compression: Uncompressed, ZIP, ZLIB, BZIP2
# cat /etc/SuSE-brand
openSUSE
VERSION = 11.2
# egrep -v '^#' gpg.conf | egrep -v '^$'
require-cross-certification
keyserver hkp://keys.gnupg.net
personal-digest-preferences SHA256
cert-digest-algo SHA256
View 3 Replies
View Related
Aug 8, 2010
Trying to encrypt my partitions for swap, root and /home directories. However, when I go to partitioner and select the drives as sdb1, sbd2 or sbd3 and click on the encryption. It errors with a -3016 error. Can't find anything in the release notes or the security documentation that would lead me to why this screen is popping.
View 3 Replies
View Related
Jun 19, 2011
Using SUSE 11, I'm trying to change my existing login user id HOME directory to use encryption. I use YAST to do this, just by clicking the ENCRYPTION box inside the USER AND GROUP MANAGER tool.I receive this error message -- "Not enough disk space left to copy existing data".Which file system do I need to add space to?Here are the filesystem existing sizes --
Filesystem: / Size: 6g Used: 3g
Filesystem: /home Size: 1.8g Used: 65m
View 4 Replies
View Related
Sep 27, 2009
I installed Fedora 11 on an Acer Aspire 5516 and everything works except my networking interface card. In Windows XP it is listed as an "Atheros Ar8132 PCI-E Fast Ethernet Controller" and it works. In Fedora 11 it is listed as "Attansic Technology Crop. unknown (OX1062)" and does not work. I have tried the default driver "ath5k" and also downloaded madwifi and modprobed "ath-pci" but I still get the same problem. What is weird is that the wireless does work. Is this chip not supported yet in Linux?
View 1 Replies
View Related
Nov 18, 2010
I'm new to the linux community -started using Slax as of this morning. I'm having trouble getting wireless set up for my Atheros AR9287, I found that Compat Wireless should get the thing to start working.
Problem is I have no idea what I'm doing setting it up. Can anyone explain this to a total novice? Or have anything else that will get it to work?
View 2 Replies
View Related
Dec 26, 2009
from time to time, wireless connection gets very slow, and i have to make it reconnect, and some times, restart fedora. The wireless card has an Atheros AR5212 802.11abg NIC (rev 01). This happens mostly when i use Tucan Downloader, or Torrent, meaning, heavy internet use.
View 3 Replies
View Related
Jan 16, 2011
I'm just having a bit of trouble with activating my wireless card (see title for details). rfkill - I installed it but nothing was soft / hard blocked (whatever they mean). I did the rfkill unblock command anyway but it didn't appear to change anything Tried doing it manually through system-config-network but this yielded no luck either. Basically all it does is continually ask for my WEP key, even though I've typed it in correctly a million times. why I don't have WPA2 because I do not have the ability to change it
View 1 Replies
View Related
Jan 11, 2010
I spent days trying to figure out how to get my atheros AR928x 802.11n wireless card to work in Ubuntu. The card worked perfect in Windows 7 but the connection kept dropping in Ubuntu. It would find my router and connect with 60% signal for about 5 seconds, then fall down to about 25% signal and then cut out altogether. After searching for days to find a solution, I finally figured it out and figured Id post it here to let everyone else in the same boat have a working wireless too!
I found this solution from:[URL].. This solution is for JAUNTY (Ubuntu 9.04), so if you are running Jaunty, you can just follow that post. If you are using Karmic (Ubuntu 9.1), you can follow this tutorial I'm posting. It's pretty simple: First, make sure you got all your files up to date. Type in a terminal:
sudo apt-get update Let that run, and once its done, type into terminal:
sudo apt-get upgrade
Once that finished, restart your computer. Again open up terminal and type:
sudo apt-get install linux-backports-modules-karmic
If you are using Jaunty, instead of karmic type in jaunty, if you use another version of ubuntu, you can find a list of versions and their names here:[URL].. Restart your computer one more time, and you should be good to go! This has been tested and confirmed to work on: -Ubuntu 9.1(karmic) with an Atheros 928x 802.11n wireless card, using the Ubuntu installed network software, in a Gateway NV53 laptop connected to a belkin 802.11n wireless router.-HP base station / 802.11g airport express
This has been tested and does not work/has issues with:
-airport extreme I hope this works for you too, and if it does, please let me know with your hardware and Ubuntu version so I can post here what other setups have been confirmed to let this work.
View 9 Replies
View Related
Apr 20, 2010
Just rebuilt my file/print server using an ECS 945GCD-M Atom motherboard. Running it under 9.10 (2.6.31-20) using the same cable and port on my Netgear switch that my old server connected to at 1GB/s without issue (old server's NIC was Intel-based).
Found the driver is an AR813x, & downloaded & installed the latest driver from here (1.0.1.9). sudo lshw -C network now shows that it's using the new driver, but still sitting at 100MB/s:
Code:
*-network
description: Ethernet interface
product: Attansic Technology Corp.
[Code].....
I can't seem to get it to come up at the full 1GB/s. I also tried ethtool -s eth0 speed 1000 without success. why networking restart ignores eth0?
View 1 Replies
View Related
Dec 30, 2010
I got a used computer (Toshiba Satellite A215-S5829) for Christmas, and it was running Vista *shudder* so I decided to wipe the hard drive, and install the latest Ubuntu. This is my first real foray into linux, and I've loved the system, but the only problem I've had with is so far is I can't get the wireless to work. I believe the card it has is Atheros AR5001, and I've tried installing the "madwifi" drivers, but I can't get them to register. I've been following the suggestions of dozens of different forum posts and answers I've found scattered around the internet, but I haven't been able to get anything to work correctly.
When I view the "Additional Drivers" in System > Administration, it says "Alternate Atheros "madwifi" driver: This driver is activated but in use," but when I click on the internet icon in the top panel, it only gives me the wired connection. It used to also give me the wireless option, just without ever successfully finding any wireless networks to which it could connect. Like I said, I've done about a half-dozen different things without any success.
View 3 Replies
View Related
