Networking :: Accessing (ping - Ssh) Via MAC Address Only
May 29, 2010I am not able to move original thread so I am linking to it: [URL]
View 2 Replies
ADVERTISEMENT
Networking :: Cannot Ping With Command - Ping IP - Address But Can Ping With - Ping IP -I Eth0
Jul 15, 2011I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
Networking :: Can't Ping Outside On Specific IP Address
Oct 14, 2010Something strange with my firewall i used firestarter I dont know why i cannot ping outside on a specific IP address here is my setup. I have IP from ISP
119.92.56.77 - eth0
192.168.50.1 - eth1
with DHCP features from 192.168.50.1 - 254. my problem is i cannot ping this specific IP address which is 119.93.232.234 if you can try there and pinging is ok but here cannot because that IP address (119.93.232.234) they used that to connect to our openvpn which is the IP is 119.92.56.78 <---- this system linux(centos) or IP has no firewall enabled. meaning i separeted this connection. which my setup is like this for OPenVPN
[code]...
General :: Ping - Gives Unknown Host Error - Ping To LAN Address Works Fine
May 13, 2011Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
Ubuntu Networking :: Ping Gets Wrong IP Address?
Mar 14, 2010my network expertise is tenuous at best. This started because one computer on my network is having trouble updating Google Toolbar information. This is a laptop which joins other wifi networks outside of the house.
Code:
BROKEN:~$ ping toolbar.google.com
PING toolbar.google.com (208.68.139.89) 56(84) bytes of data.
[code]....
Ubuntu Networking :: Can Connect But Cannot Even Ping Address
Jul 29, 2011I have installed openvpn on an ubuntu 10.04 server. I run 11.04 on my desktop. It can connect to my VPN server. The problem is, I have ZERO internet access. I cannot even ping an IP address.
View 5 Replies View RelatedNetworking :: 2 Ip Address In The Same Nterface, The Second One Only Respond Ping?
Apr 7, 2010I have a server with centos 5 and plesk 9 and I have buy an additional IP address for my server, when i create it in plesk, there is no problem, all its ok I can assign it to a new domain, but the ip only responds ping, none of other services as http, ssh or smtp.I paste here the configuration of files
ifcfg-eth0
device=eth0
bootproto=dhcp
[code]....
Ubuntu Networking :: Able To Ping IP Address But Not Domain Names?
Jun 15, 2010Since two days i m not able to browse websites using the domain names but able to ping/browse using IP addressed. I have done the following:
1. Using wireless i m able to get IP address of DNS (8.8.8., Gateway, localhost & router ip address
2. Disabled wireless and connected ETH0 but still the same problem
3. not able to edit resolv.conf
sudo gedit resolv.conf
** (gedit:4179): WARNING **: Hit unhandled case 0 (Error opening file: Input/output error) in parse_error.
[code].....
CentOS 5 Networking :: Unable To Ping - No Reply From Certain Address While Others Work Ok
Jun 25, 2009I run an centos server. From the console I can ping google.com and get a reply. But when I ping another address say xyz.com, the IP address is resolved (11.22.33.44) but there is no reply. In the same network in our office from my desktop I ping [URL] and there is a reply.I turned of the firewall but still the same problem.
View 9 Replies View RelatedNetworking :: Setup Firewall / Gateway Address And Dns / Give To Clients For Accessing Internet?
May 12, 2010I have 17 system (sys1,sys2,sys3.....sys17) in my office, and i am willing to setup a dedicated system to act as a firewall for that i have selected sys1 with two NIC(eth0 for local network and eth1 for internet) and i have configured to access internet in my office for that i have opened a wellknown port 80.but my clients are not accessing the internet..
and please check my sample IP configuration !!!
interface : eth1 (ISP IP)just for example
IP :192.168.0.2
gateway:192.168.0.1
dns:202.56.230.5
dns:202.56.230.6
Interface : eth0 (my local lan )
192.168.1.1
255.255.255.0
IP address of xp clients ranges form 192.168.1.2 to 192.168.1.16 with default 255.255.255.0
my question is that which gateway address and dns i have to give to my clients for accessing internet ?...
Ubuntu Networking :: Ping To Offline Host Returns Arbitrary Ip Address?
Mar 17, 2011A brief description of my network:It is a small home network consisting of an Ubuntu 10.04LTS server edition, an Iomega ix2 NAS, a WinXP pro server and several family laptops.This is all routed through a Netgear WNDR3300 home router. All are assigned IP's via DHCP and all but the laptops are static (via DHCP though). The WAN address/DNS is assigned via DHCP from my ISP.The problem:When one of the machines is offline, Ubuntu does not resolve the netbios name correctly. No surprise here. But what is happening is that it is finding some arbitrary machine on another network. Below is what a ping to an offline host reveals:
Code:
ping -c3 hostname
PING hostname (204.232.162.92) 56(84) bytes of data.
[code]....
Networking :: Getting An Ip Address From The DHCP Router, But Cannout Ping Any Other Ips Or Connect To The Internet?
Jan 31, 2010I've only been using linux for a few days so I don't know all the tricks. I'm pretty savy configuring windows networks however.My adapter is (according to windows) a: CNet PRO200WL PCI fast ethernet adapterLinux says it is a: 21x4x DEC-tulip compatible 10/100 EthernetI do seem to be getting an ip address from the DHCP router, but I cannout ping any other ips or connect to the internet.I've tried a bunch of different options, switching things back and forth, but it still doesn't work, and honestly i don't even know what some of the options mean.
ALSO, if this helps:
paladin:~ # ifconfig eth0
Eth0 Link encap:Ethernet HWaddr 00:08:A1:03:3C:99
[code]....
Ubuntu Networking :: Install NIC Wired RC-400 - Error Comes Out - Unable To Access The Internet Or Ping Any IP Address?
May 5, 2010we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
Code:
make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code:
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux
xxx@xxx-desktop:~$
Ubuntu Networking :: Ubuntu And Win Won't Ping But Address Gets Assigned
Dec 4, 2010I have two machines
1. Ubuntu (static IP 192.168.1.1, running dhcp server)
2. Windows 7 (dhcp assigned IP based on mac - >192.168.1.2)
Now when I fire up both machines, Linux assigns IP to win BUT they dont ping. From ifconfig I know:
eth2 Link encap:Ethernet HWaddr 00:1b:21:7b:2d:68
inet addr:192.168.1.1 Bcast:192.168.1.3 Mask:255.255.255.252
inet6 addr: fe80::21b:21ff:fe7b:2d68/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
Now I get time exceeded icmp every time I try to ping both from linux OR windows...
Ubuntu Servers :: Accessing MySQL Via IP Address
Jul 9, 2010I need to Install MySql Server somewhere that I can access. Instead on installing it in a Windows box like I have for years, I'm thinking of putting it on a Ubuntu Server box (or virtual machine) instead. Should I do it on a Ubuntu Server or a Ubunto desktop box? I have never installed Ubuntu as a server, is it more or less the same as installing the desktop version? Lastly, is there multiple versions of Ubuntu where one might be more appropriate than another? All I want is a machine that I can access MySql via an IP address. Don't need DHCP, dns, Mail server or anything.
View 4 Replies View RelatedGeneral :: Monitor The IP Address Of Machines Who Are Accessing The Server?
May 7, 2010I have developed a website. Now i would like to monitor the IP address of machines who are accessing the server. The simplest possible solution to this that comes first into my mind is to use jsp inbuilt tags.
Code:
<%
out.print( request.getRemoteAddr() );
out.print( request.getRemoteHost() );
%>
but it has given me some other IP address(May be a proxy server's ip address)
So i was left with one choice is to run netstat on host server . Here is what i have done.
Code:
netstat -an | grep 8080 (As tomcat runs on port 8080).
Should i modify the command or there is any other way around to monitor the IP address?
Networking :: Debian 5 - After SysCp Installation And Configure Ping Valure - Ping - Unknown Host
Jul 9, 2010Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
Slackware :: Cannot Even Ping Address Of Internet Provider
Dec 5, 2010I have currently installed Slackware 13.1 64bit version on a laptop Acer computer. This computer is connected to my cable service (comcast) modem via a dlink router. This computer has linux and Windows 7 dual boot systems installed. Initially I was able to connect to the internet with either linux or Windows. Now I cannot get on the internet with linux, but I can with windows.
I cannot even ping the address of my internet provider,which I can obtain through windows 7 by running the program ipconfig. When I ping the address, in linux,it gives me the message that "network is unreachable".I can ping it in windows 7.If I run on linux the program ifconfig, it does not even show an ethernet, like it does on my other computer connected to this network.I set the thing up initially with netconfig and used DHCP.As I said, initially it worked.I did not use this computer for some time, and now it has the previously described problems.Where should I start, trying to run this down?I have already done everything I can think of,like powered things off, and reset the cable modem etc.
Ubuntu Networking :: Unable To Ping Over Wireless But Can Ping Over Wired?
Jul 24, 2010I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
Networking :: BIND9 SLOW Ping When Ping By Hostname
Feb 1, 2011I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
Networking :: Can't Ping Past Gateway / Can Ping Server From Outside
Apr 29, 2010So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedNetworking :: Ping Connection To Router OK But No Ping Between Boxes In LAN
May 26, 2010I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
Ubuntu Servers :: DNS - Ping A LAN Device By Name - Get Reply With Only The IP Address
May 2, 2010I have configured DNS on ubuntu server 8.10 and it is working fine. There is one question I have though. Everytime I ping a LAN device by name I get the reply from the server with only the IP Address.
View 2 Replies View RelatedCentOS 5 Server :: Cannot Ping Webmail Address Inside Proxy
Dec 23, 2010I am using CentOS 5.5, I installed squid3 in that machine. From my users machine i am not able to use our webmail address. Outlook shows pop3 error.cannot ping webmail address inside proxy.
View 1 Replies View RelatedFedora Networking :: Xp Can Ping 10 - But Can't Ping Xp
May 21, 2009I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
Networking :: Ping Using PHP Exec("ping -n 1 $ip",$output[],$retval)?
Apr 23, 2010I try to ping with php : exec("ping -n 1 $ip",$output[],$retval); it works fine in window. but in linux i got this error : ping: icmp open socket: Operation not permitted are there any ways to solve this ?
View 5 Replies View RelatedSoftware :: Accessing Memory Address Outside Standard Memory
Nov 22, 2009I am writing an application that wants to access periphals registers outside the standard (allowed) memory area.
Doing so gets me "segmentation fault".
I know, this is natural behaviour.
One way of getting around this is writing the module which has to be loaded by linux. I will consider this some time later.
For now, I want to come to some quick result and allow linux or gcc compiler to write to those memory areas of periphals. Is there a direct way to do so?
Ubuntu Networking :: Port Forwarding From Public Address To Private Address?
Feb 24, 2010Currently my OS is Ubuntu 9.04 Jaunty Jackalope Desktop OS and my web server is Apache2. I have a public address 60.x.y.z and my pc local address is 10.x.y.z. I have a web app in my Apache2 which currently run in localhost(10.x.y.z).
I would like to enable the web app so that it could be browse from outside. I know there maybe some port forwarding process and some commands involved in order to do that. But I have no idea on the steps to do that.
Networking :: Error Str2addr:Address 35 Outside Range Of Address Field Length 1?
May 12, 2011I am working on implementing a protocol on NS2.34 .I really need help to solve this problem . Actually , I don't now whether the problem is generated by the tcl code or the c++ code when I run the simulation, I get this result :
Code:
num_nodes is set 64
INITIALIZE THE LIST xListHead
34
45
channel.cc:sendUp - Calc highestAntennaZ_ and distCST_
highestAntennaZ_ = 1.5, distCST_ = 550.0
SORTING LISTS ...DONE!
code....
Networking :: Program To Assign Globa LIPv6 Address And Bind() To The Previously Assigned Address?
Apr 24, 2010Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...