Ubuntu Networking :: Ubuntu And Win Won't Ping But Address Gets Assigned
Dec 4, 2010
I have two machines
1. Ubuntu (static IP 192.168.1.1, running dhcp server)
2. Windows 7 (dhcp assigned IP based on mac - >192.168.1.2)
Now when I fire up both machines, Linux assigns IP to win BUT they dont ping. From ifconfig I know:
eth2 Link encap:Ethernet HWaddr 00:1b:21:7b:2d:68
inet addr:192.168.1.1 Bcast:192.168.1.3 Mask:255.255.255.252
inet6 addr: fe80::21b:21ff:fe7b:2d68/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
Now I get time exceeded icmp every time I try to ping both from linux OR windows...
View 2 Replies
ADVERTISEMENT
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Apr 24, 2010
Consider the following program:
Code:
#include <stdio.h>
#include <stdint.h>
[code]...
View 2 Replies
View Related
Mar 13, 2010
Do any one knows how to ping global inet6 addresses assigned between two systems. I assigned inet6 address through "ip addr add 2001::4 dev eth0" and similarly 2001::5 in another machine and tried to ping 2001::5 from 2001::4, but it is showing,
sait87@static-host:~$ ping6 2001::5
connect: Network is unreachable
Do any one knows solution for this problem.
View 2 Replies
View Related
Mar 14, 2010
my network expertise is tenuous at best. This started because one computer on my network is having trouble updating Google Toolbar information. This is a laptop which joins other wifi networks outside of the house.
Code:
BROKEN:~$ ping toolbar.google.com
PING toolbar.google.com (208.68.139.89) 56(84) bytes of data.
[code]....
View 9 Replies
View Related
Jul 29, 2011
I have installed openvpn on an ubuntu 10.04 server. I run 11.04 on my desktop. It can connect to my VPN server. The problem is, I have ZERO internet access. I cannot even ping an IP address.
View 5 Replies
View Related
Jun 15, 2010
Since two days i m not able to browse websites using the domain names but able to ping/browse using IP addressed. I have done the following:
1. Using wireless i m able to get IP address of DNS (8.8.8., Gateway, localhost & router ip address
2. Disabled wireless and connected ETH0 but still the same problem
3. not able to edit resolv.conf
sudo gedit resolv.conf
** (gedit:4179): WARNING **: Hit unhandled case 0 (Error opening file: Input/output error) in parse_error.
[code].....
View 4 Replies
View Related
May 29, 2010
I am not able to move original thread so I am linking to it: [URL]
View 2 Replies
View Related
Oct 14, 2010
Something strange with my firewall i used firestarter I dont know why i cannot ping outside on a specific IP address here is my setup. I have IP from ISP
119.92.56.77 - eth0
192.168.50.1 - eth1
with DHCP features from 192.168.50.1 - 254. my problem is i cannot ping this specific IP address which is 119.93.232.234 if you can try there and pinging is ok but here cannot because that IP address (119.93.232.234) they used that to connect to our openvpn which is the IP is 119.92.56.78 <---- this system linux(centos) or IP has no firewall enabled. meaning i separeted this connection. which my setup is like this for OPenVPN
[code]...
View 1 Replies
View Related
Mar 17, 2011
A brief description of my network:It is a small home network consisting of an Ubuntu 10.04LTS server edition, an Iomega ix2 NAS, a WinXP pro server and several family laptops.This is all routed through a Netgear WNDR3300 home router. All are assigned IP's via DHCP and all but the laptops are static (via DHCP though). The WAN address/DNS is assigned via DHCP from my ISP.The problem:When one of the machines is offline, Ubuntu does not resolve the netbios name correctly. No surprise here. But what is happening is that it is finding some arbitrary machine on another network. Below is what a ping to an offline host reveals:
Code:
ping -c3 hostname
PING hostname (204.232.162.92) 56(84) bytes of data.
[code]....
View 9 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Apr 7, 2010
I have a server with centos 5 and plesk 9 and I have buy an additional IP address for my server, when i create it in plesk, there is no problem, all its ok I can assign it to a new domain, but the ip only responds ping, none of other services as http, ssh or smtp.I paste here the configuration of files
ifcfg-eth0
device=eth0
bootproto=dhcp
[code]....
View 12 Replies
View Related
May 5, 2010
we are trying to install this NIC Rosewill RC-400 Chipset RTL8169S-32 in Ubuntu 9.04 we downloaded the drivers from Rosewill website (For kernel 2.4.x and 2.6.x V 3.1) but when we follow the instruction in the readme file and do make clean modules and error comes out
Code:
make -C src/ clean
make[1]: Entering directory `/home/trinity/Desktop/r8169-6.006.00/src'
rm -rf *.o *.ko *~ core* .dep* .*.d .*.cmd *.mod.c *.a *.s .*.flags .tmp_versions Module.symvers Modules.symvers rset[code]...
So I went do realteak downloaded latest available drivers that seems to be were release yesterday did same command and same error So I made only make and it went fine did then make clean modules and went fine so made make install, depmod -a and modprobe r8169 verify int was up and getting correct ip from router but I'm not able to access the internet or ping any IP address
Code:
xxx@xxx-desktop:~$ uname -a
Linux xxx-desktop 2.6.28-18-generic #60-Ubuntu SMP Fri Mar 12 04:40:52 UTC 2010 i686 GNU/Linux
xxx@xxx-desktop:~$
View 9 Replies
View Related
Jun 25, 2009
I run an centos server. From the console I can ping google.com and get a reply. But when I ping another address say xyz.com, the IP address is resolved (11.22.33.44) but there is no reply. In the same network in our office from my desktop I ping [URL] and there is a reply.I turned of the firewall but still the same problem.
View 9 Replies
View Related
May 29, 2014
I have 2 PCs, each running Oracle VirtualBox with about 30VMs installed and standing on the same table
On shopping router I found TP-Link
TL-WR741ND
150Mbps Wireless N Router
[URL] ....
How can it assign 30 IP address to each PC?
View 0 Replies
View Related
Nov 18, 2009
I'm stumped here as it seems like after an update etho:0 has assigned itself 2 x IP Addresses. I don't understand how this happened or how to fix it so some help would be great as I cannot access cPanel while it's like this or my sub directories.Here is a print of ifconfig
-bash-3.2# ifconfig
eth0 Link encap:Ethernet HWaddr AA:01:5F:9A:FE:26
inet addr:95.154.254.38 Bcast:95.154.254.38 Mask:255.255.255.255
[code]....
View 4 Replies
View Related
Jan 31, 2010
I've only been using linux for a few days so I don't know all the tricks. I'm pretty savy configuring windows networks however.My adapter is (according to windows) a: CNet PRO200WL PCI fast ethernet adapterLinux says it is a: 21x4x DEC-tulip compatible 10/100 EthernetI do seem to be getting an ip address from the DHCP router, but I cannout ping any other ips or connect to the internet.I've tried a bunch of different options, switching things back and forth, but it still doesn't work, and honestly i don't even know what some of the options mean.
ALSO, if this helps:
paladin:~ # ifconfig eth0
Eth0 Link encap:Ethernet HWaddr 00:08:A1:03:3C:99
[code]....
View 14 Replies
View Related
Aug 13, 2010
I would like to create several aliases to eth0, but have the addresses assigned by DHCP instead of being set to static IP's. Is this even possible? All the examples I've seen assign a static IP using the command:
ifconfig eth0:0 192.168.1.11 up
View 5 Replies
View Related
Jun 10, 2011
How to find the Address which is already in 2632 port?
View 1 Replies
View Related
Aug 7, 2011
I am just trying to get SSH working between 2 local machines on OpensSuse 11.4 boxes. I have the SSHD daemon running, the firewall is configured to allow SSH to pass, and I am using SSH's password authentication. However, my machines cannot see each other. Anytime I try to SSH, I get "Could not resolve hostname<hostname>: Name or service not known."
Of course, that leads me to believe I need an entry in my /etc/hosts file. However, I use DHCP, and therefore have a dynamic IP address. Therefore, my hosts names will only be good until the next IP renewal. How in the world do I configure SSH with a DHCP assigned address?
View 4 Replies
View Related
Dec 17, 2009
I have an HP Pavilion A6750F with an AMD Phenom 9650 Quad Core. 8 GB memoryThe NIC is a REALTEC Semiconductor RLT8111/81688 PCI Express Gigabit Ethernet Controller.The actual MAC address for the NIC is 00:24:21:55:DE:40I have loaded CentOS 5.3 on this host three of four times in various configurations and patching levels.THE PROBLEM: The system identifies the NIC as having MAC FE:FF:FF:FF:FF:FF.When this happens, the network connectivity obviously stops working.It identifies everything else OK, just maps the wrong MAC.I'm no sure how to troubleshoot this problem. I tried rebooting a couple times and once that fixed it. Usually it does not. I reloaded (gasp) Windows Vista on it and it worked ok.This last time, I reloaded CentOS it hung on the bootup (ASK ??), I reset it, it rebooted and everything looks ok; for now.
The system says it is presently using driver r8169
View 4 Replies
View Related
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
View Related
May 2, 2010
I have configured DNS on ubuntu server 8.10 and it is working fine. There is one question I have though. Everytime I ping a LAN device by name I get the reply from the server with only the IP Address.
View 2 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Dec 5, 2010
I have currently installed Slackware 13.1 64bit version on a laptop Acer computer. This computer is connected to my cable service (comcast) modem via a dlink router. This computer has linux and Windows 7 dual boot systems installed. Initially I was able to connect to the internet with either linux or Windows. Now I cannot get on the internet with linux, but I can with windows.
I cannot even ping the address of my internet provider,which I can obtain through windows 7 by running the program ipconfig. When I ping the address, in linux,it gives me the message that "network is unreachable".I can ping it in windows 7.If I run on linux the program ifconfig, it does not even show an ethernet, like it does on my other computer connected to this network.I set the thing up initially with netconfig and used DHCP.As I said, initially it worked.I did not use this computer for some time, and now it has the previously described problems.Where should I start, trying to run this down?I have already done everything I can think of,like powered things off, and reset the cable modem etc.
View 15 Replies
View Related
Feb 1, 2011
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
View 10 Replies
View Related
Apr 29, 2010
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies
View Related
May 26, 2010
I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
View 2 Replies
View Related
Sep 18, 2010
I'm trying to assign like 80 IPv6 addresses on eth0 for virtual webhosting, but after 55 addresses I get the following error:# ip addr add 2a01:9f8:a171:1651::4b:a8af dev eth0 RTNETLINK answers: File exists.What's the problem? I don't understand that error message at all. Is the number of IPv6 addresses per device somehow limited?Ubuntu 10.4.1 server, 64 bit.
View 1 Replies
View Related
Mar 23, 2011
I'm running Ubuntu Server 10.10 on a 64 bit laptop (also have GNOME installed just for convenience), and have a website up using apache2. I am wondering if it is possible to configure both eth0 and wlan0 to the same local static IP address? I would like to walk around my house and do stuff when I want and still have the website accessible, but also be able to jack my laptop back into the router when I am away, just for peace of mind.
Is this possible? If it is, do I need to do some configuring in apache2 to tell it to use another device? Is this even a smart way to get what I want done?
View 2 Replies
View Related
