Fedora Installation :: Reset The Bootloader Back To XP'S?
Aug 22, 2009
I am having to get off UBUNTU cause flash runs HORRIBLY.. I can log on to facebook and open apps and FF 3.0.18 almost comes to a hault same thing for ..... the video lags anyways, someone on another Linux forum im on said try FEDORA. well what if I have windows XP and lets say FEDORA isnt for me.. how do I reset the bootloader back to XP'S will it do like UBUNTU and say ok XP'S bootloader is on SDA2 so this is where I need to go so when I run the XP recovery cd, I can FIXBOOT FIXMBR then its restored back to XP's then just go in and delete the partition
I ask cause, I got really screwed by suse... It put my boot loader on ANOTHER partition instead of finding XP'S and basically was locked out and had to reinstall windows cause I had no clue how to link it back up to the partition that XP was on, because I had no clue it was put somewhere else. I was so mad.
View 4 Replies
ADVERTISEMENT
Feb 4, 2009
I thought it would be cool and easy to install Windows 7, ended up being a headache and worthless so far. Now I only have the windows bootloader with vista and windows 7 as options. How can I get grub going again? I have all 6 fedore core 10 cds and a live cd in case those will help, I am using the live cd to play in fedora right now, but I am not sure how to get access to grub.conf and what to change in it, because I am pretty sure I have to add Windows 7 to it.
View 4 Replies
View Related
May 2, 2011
I have Windows 7 and Ubuntu installed and have the Windows installation encrypted with Truecrypt
I upgraded my Ubuntu installation today to 11.04 from the previous version (sorry can't remember its number / name) but I have a problem.
Because I had my Windows installation encrypted with Truecrypt I have to go through Truecrypts bootloader or I can't access Windows.
The upgrade to the latest version of Ubuntu replaced Truecrypts bootloader with Ubuntu's (GRUB 2 I assume) and now I can't access Windows.
Is there a way to restore the old bootloader ?
View 1 Replies
View Related
Dec 5, 2008
I know practically nothing about Linux but am trying to learn. I actually want to get certified Linux+. So I figure this forum would be a great resource. Anyway, I have a dual boot situation going on my laptop with Windows XP and Ubuntu, and am pretty frustrated that I seem to forced to use GRUB. I really dont feel like reinstalling. Is there a way to simply change it back to using the Windows bootloader?
View 3 Replies
View Related
Jun 21, 2009
my question is simple and yet in true linux fashion the answer eludes my best google searches.
i accidentally removed my taskbar from the bottom of my Fedora 11 KDE desktop. after messing around with it i was able to get a working panel using the add panel feature, but i dont like it.
how do i restore my KDE desktop to the Leonidas default that it installs with?
View 4 Replies
View Related
Jul 27, 2010
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
View 3 Replies
View Related
Sep 13, 2010
I have windows 7 home premium currently installed and I have just recently installed Linux Mint and it has replaced my MBR with GRUB. Is there any way I can restore the normal Windows 7 Boot Loader and have the secondary option to boot my Linux Mint?
View 3 Replies
View Related
Jan 29, 2010
ok this is going to sound 1/2 retarded
i have a desktop that had had vista on it forever and i decided to install ubuntu on the 10gigs i had free for the longest time so i installed ubuntu but i did a stupid thing in my opinion and installed grubboot loader on the windows partition now when i try to boot vista it takes me back to the bootloader and i need to be able to use both vista(grphicswork) and ubuntu(networking) i cannot loose my vista files by re installing vista
View 2 Replies
View Related
Sep 20, 2010
I installed ubuntu on my lappy but due to battery life reasons and driver issues I cannot use it; must return to windows . I do not want GRUB on it but I'm stuck with it now. how do I wind the clock back?
View 1 Replies
View Related
Jun 3, 2011
I'm unable to reset using either the reset option in gnome shell or the command using a terminal. When I select it the shell exits and displays the graphic "exploding" and then it just sits there. Shutdown works fine; just no reset. Any ideas? I've installed from the DVD. I booted the live CD and it resets just fine so I know it's no my hardware
View 1 Replies
View Related
Aug 20, 2010
I accidentally deleted my /etc/fonts/font-config file and now my fonts are all terribly out of whack in several applications including Synaptic, Chromium, Firefox, etc. How do I reset my fonts back to the Lucid Lynx default?
View 4 Replies
View Related
Aug 23, 2010
I was trying out a theme from gnome-look (elegant gnome) and it had an option to change my gdm theme. I used it, did not like the look, but when I uninstalled it said there was no back-up. Now my gdm looks like something from windows 95! How can I reset it back to the original settings? I tried reinstalling GDM in synaptic but no change
View 3 Replies
View Related
Jun 27, 2010
I'm an Ubuntu Lucid user who is trying Fedora 13. Successfully installed, but did something wrong at the bootloader stage. For identifier I typed "Ubuntu." the dropdown menu below was already reading sda1 as the partition that Ubuntu is on, so I kept it. Now Ubuntu is on the boot menu, but will not load... error message about an unrecognized system. How can I manually add it now? Sorry, should have done a search. I found an answer in editing the menu.conf file.
View 5 Replies
View Related
May 30, 2010
I've been using Ubuntu on my servers, deskto PC and laptop. But this time I decided to give a try for Fedora 13. Earlier my tests failed because of nVidia driver installation for every kernel update was so pain for me. Fedora's Live CD is quite stripped. It has good tools installed but it's missing OpenOffice.org. That should be mostly for demostration to Windows users.Installation with Live CD is straight forward even I haven't tried with Windows partitions (shrink or so). Ubuntu can be installed inside Windows drive (into loop file) without shrinking partitions. I don't know if Fedora can do the same.
But issues what I have got even before getting in... Disk partition tools are very great. But when I tried to install Fedora into LVM without using separate /boot partition - that failed. I am using Ubuntu's GRUB2 and it can boot from LVM root directly. And I thought Fedora-13 can do the same. I have been installing Red Hat Enterprise Linuxes many many times. And there is an option to skip bootloader installation. Why it is missing on Fedora? I just want Fedora into LVM without anything else. Ubuntu's GRUB2 can boot from Fedora's /boot -directory even it's on LVM. If I get Fedora installed.
So error what I get trying to install Fedora...Harddrive sda has just one big LVM partition, nothing else. Ubuntu GRUB2 is on MBR.I have just one 10Gb LV for Fedora, existing /home and swap. Plus Ubuntu's own root partition what I don't need with Fedora.partitioning program is completed as I like but then I get error message: Bootable partitions cannot be on a logical volume. I have tried to install using Live CD, DVD with graphics and text modes. None of them gives me option to skip installing bootloader. Another option I had on my mind is that I could try to use USB memory stick to have /boot. But I'm not sure if it works and installer will overwrite my existing GRUB2 on sda. If it works then I could move /boot -stuff into LVM and tell Ubuntu's GRUB2 to boot from Fedora's root LVM.
View 3 Replies
View Related
Oct 11, 2010
I'm currently in the process of installing F13 from a LiveCD into a dualboot configuration with Windows 7 and I used 80 gigs of unpartitioned space for the install.The step after it creates the boot, swap etc partitions is to install the bootloader.Should I install it to the MBR or to the first sector of the boot partition? What are the pros and cons of both?
View 5 Replies
View Related
May 29, 2010
Going from Fedora 12 to 13. Got to the point where I have to reboot to install, system reboots to 12. This is a triple boot system with Open Suse and Mint, and the grub2 bootloader from Mint is the bootloader for the whole shebang. In the "how to use preupgrade" instructions there's a line that says "dentify the drive and partition of your Fedora /boot folder." How? If that sounds odd, consider that in my set up "computer" shows 4 partitions (and with just three operating systems..?). I can mount them, but have a problem telling which sytem is Fedora, Suse or Mint. And getting the FEDORA bootloader to find the PREUPGRADE kernel ... Momma said there'd be days like this.
cat /etc/fstab just returned /dev/sda1 on /boot. I installed Fedora first, before Suse or Mint, so being on the first drive or partition sounds right, but the multiple drives throws me, and "just guessing" doesn't seem like the way to go.
View 12 Replies
View Related
Sep 1, 2011
I had Fedora on my laptop (as well as Windows Vista 32-bit) working fine but I wanted to add Ubuntu for some things, and I did, however something unexpected happened: When I go to boot the the computer, the GRUB 2 bootloader (from Ubuntu) showed ubuntu, and windows, but not fedora, so I can't get into fedora. From a knoppix disk, I determined that all my fedora stuff is there, and (to the best of my ability to determine) intact, but I can't access it. What can I do from Ubuntu or the GRUB 2 bootloader itself to simply add fedora to that list?
View 3 Replies
View Related
Aug 9, 2009
I recently installed Fedora on a triple boot system with Winows XP and Ubuntu JJ. how to add Ubuntu's grub to the bootloader. Here is the output of Fdisk -l.
[root@localhost rabbit]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
View 8 Replies
View Related
Nov 15, 2009
I have the Ubuntu 9.10 installed and another partition where I want to have Fedora.
But I would like to install it without messing up with the Grub 2 bootloader that I already have there.
Is it possible to install Fedora and then add it to Grub 2? If so, how can I do that?
View 10 Replies
View Related
Nov 2, 2010
Just got done installing F14 64 and all went well however when I rebooted the machine it boots straight into windows, where is my GRUB boot loader? Only one drive in this machine (sda) and I remember going through the GRUB settings during the install. How to get a bootloader working now because in my linux experience (since RH5) it has always just installed the bootloader and worked. Apparently ext4 is bunk for me and when using LVM settings. I am up and running and grub is working.
View 2 Replies
View Related
Apr 16, 2011
I am trying to install Fedora 14 with the LILO bootloader. The live installation disc does not let you select a bootloader during installation. how to install with GRUB2, that will work as well
View 3 Replies
View Related
Oct 23, 2009
I have my FC11 system set up to automatically download and install updates. I had to reboot yesterday because of one of these updates. It seems that this update messed up grub. When I rebooted I only got the flickering cursor. So far I have tried the following using the rescue disk and executing chroot /mnt/sysimage
fdisk -l gives me this result :
I have /dev/sda, /dev/sdb, /dev/sdc
Boot flag is with /dev/sda1 which also has FIlesystem Linux, where the other I notice have filesystem Linux LVM (don't know if that is relevant).
I tried to restore grub.
grub
> find /grub/grub.conf
hd(0,0)
> root (hd0,0)
Filesystem type is ext2fs partition type 0x83
> setup (hd0)
and there were no error messages. However, no change when rebooting.
The device map says that
hd0 = /dev/sda
hd1= /dev/sdb
hd2= /dev/sdc
I also did a grub-install --recheck /dev/sda. All to no avail.
The following struck me as strange, but not sure how relevant :
- In grub, "find /boot/grub/grub.conf" gave me "file not found"; however, with ls I do see a /boot/grub/grub.conf and also a /etc/grub.conf
- This grub.conf file says that boot=/dev/sdc (where the boot flag is with /dev/sda) and all references are to (hd2,0) whereas the "find /grub/grub.conf" always gives me "(hd0,0)" as said above.
- There seems to be no /grub/grub.conf file on my system except under the /boot directory
- I have also tried resetting the boot flag to /dev/sdc with fdisk, but that did not help either.
- originally, I did set the system up on /dev/sdc by the way
Am just trying to guess now what other combinations I could try. I already tried in BIOS to boot from all the different devices. No luck.
View 3 Replies
View Related
Dec 9, 2009
I've installed Fedora to dual-boot with Ubuntu. I'm using /dev/sda1 for Ubuntu, and /dev/sda3 for Fedora. Unfortunately, I unchecked the "Install boot loader" checkbox, so I still have the Ubuntu boot loader but no way to boot Fedora. While still logged into the Fedora Live CD, how can I install the Fedora boot loader to /dev/sda3 and set it up to chainload from Ubuntu's GRUB menu? (I'm thinking it would be 'grub-install /dev/sda3' as root, and then just edit /dev/sda1:/boot/grub/menu.lst, but I'd like confirmation.)
View 2 Replies
View Related
Mar 12, 2010
I have installed Windows 7 and fedora 12 on my system.I want to reinstall my windows 7 but as I know after installing windows 7 , i will not be able to boot my fedora 12 how to recover bootloader of fedora 12 after installing windows 7. [URL]
View 1 Replies
View Related
Dec 25, 2010
I've just gotten another kernel upgrade, and need to copy it to a bootloader on another Linux sytem, so Fedora will boot, using legacy grub. The problem is that when I check /boot/grub/grub.conf, I get title Fedora (2.6.34.7-66.fc13.i686) root (hd0,2)
[Code]...
It's all Greek to me, but evidently it means something to grub, as that's what is in the Fedora kernel(s) that work. I can't find where this "bunch of stuff" is for the new kernel, so I can paste it into the grub file on the other system. The other system is Linux Mint9, and I've made Mint work using (legacy) grub, and deleted grub2 so that it's no longer Mint's bootloader.
View 4 Replies
View Related
Jan 19, 2011
I am getting a new computer with Windows 7 installed. It will contain a second hard disk on which I will install Fedora Linux. I plan to put grub in the /boot partition of that disk,so I won't be able to boot Linux directly to start. I plan to use the Windows 7 bootloader to dual boot, and I understand in principle how this is done. I set up a previous computer which was running Vista this way, using the program Easy BCD which simplified setting up the Vista bootloader. But the Easy BCD website doesn't address the question of what to do with Windows 7.
View 2 Replies
View Related
May 29, 2010
I have a working Ubuntu install with the Grub2 bootloader. I need to manually add an entry to boot Fedora 13 off of sda. Sda1 is the boot partition, sda2 is LVM. None of the examples I've tried work. I do also have F13 grub installed on sda, but chainloading to it didn't do anything other than a blinking cursor.
View 5 Replies
View Related
Nov 21, 2009
I ran preupgrade, and everytime it boots to begin the upgrade the video goes away and I have no idea what it is doing, which appears to be nothing.I was going to try something else before booting preupgrade, but when I run it now, it just immediately takes me to the ready to reboot part and doesn't download the packages again. I expect it to because I deleted all the stuff in /boot/upgrade and /var/cache/yum/preupgrade. I suspect there is another file somewhere making it think its ready to upgrade when it really isn't Any help locating it or know what the problem is appreciated.I tried to upgrade off of DVD, but that resulted in the very first RPM saying it is corrupt, even though media check and imgburn/verify said if was OK.
View 13 Replies
View Related
Jan 18, 2011
I installed the nvidia driver from the vendors homepage. But since it does not support regulation of brightness (and the display is that bright that I want to downlevel it), I wanted to go back to the default display driver which is the nouveau driver.So I uninstalled the nvidia driver and then I realized that I didn't make any backup of the xorg.conf file prior installing the nvidia driver. Shame on me, yeah.Now when the x-server started, it couldn't find the nvidia driver. Okay, fair as it was removed. Next to that my keyboard becomes unresponsive. That's really aching as I can not switch to a text-based console any longer.I'm able to boot into initmode 3 by editing the kernel parameters in the boatloader. I'm also able to edit the xorg.conf with vi in the shell then and start the xserver to test things by calling xinit.
I already tried to recover a bit from this situation by removing the references to the nvidia driver and replaced it with some information I could find on the nouveau homepage - but no luck so far, keyboard still freezes and login window does not appear. I could take a look into the xorg.0.log which warns me about the keyboard getting disabled but I do not really understand why. Next to that I find some other additional information. My computer experience is quite okay, but I'm somehow new to Fedora, I started half a year ago with Fedora 13 on my other laptop which worked like a breeze.
I wondered where I can find information about how to configure the xserver in the default configuration, if there is some reset functionality or so, that brings me back to installation defaults. Those worked ok for the nouveau driver. Unfourtionatly I was not able to gather the correct package name that would probably had helpded me by removing and installing it again.Next to fixing my setup, I had another idea as this is a quite new install to just re-run the install again on to that machine. Is this possible with keeping the files in my homedir?
View 9 Replies
View Related
Mar 15, 2011
The update was hanging for hours I gave up and did yum update in commandline mode.Software Update still says everything needs doing. How can I reset it to match what is now installed?.
View 4 Replies
View Related
