Debian Installation :: Emachines G725: Ethernet Card Not Recognized
Mar 4, 2010i can't install debian 5 in my emachines G725 notebook, the ethernet card is not recognized, it's name: Atheros AR8132 PCI-E Fast Ethernet Controller .
View 2 Replies
ADVERTISEMENT
Debian Hardware :: Ethernet Card Intel I217-LM Not Recognized By Wheezy
Mar 7, 2014I tried to install the latest stable version of Debian (download yesterday : Debian Wheezy 7.4.0) on my new computer Fujitsu Celsius W530.The version installed is exactly this one (given by the commande "uname -a") :
PCNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
=> A Debian Wheezy 64 bit
I have a problem with the Intel ethernet card : I217-LM (the model was verified on the Fujitsu specifications and also on the Windows 8 I use on another partition).During the install procedure, Debian did not find the ethernet card.I continued the install without it and after I tried to make it found.I got a Linux driver in the Intel Web Site but I saw after that Debian loaded yet this driver (e1000e), so I did not install the driver from Intel (I needed to get linux-headers and to compil the files).
So when I force the system to load the driver, it gives no error but the device is still not found when I try to bringup the network interface.URL...
- understand why I see the Device (with "lspci" command) and the module "e1000e" (I tried also the "e1000" one) loaded with "lsmod" command ?
- make the card work to allow my debian for connecting to internet ?
Here some commands which can show you the problem :
Code: Select all~# lsmod | grep e1000
e1000e 120822 0
root@PC-DEV-JB-debian:~# ll /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
-rw-r--r-- 1 root root 184K févr. 2 02:04 /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
[code]....
Debian Installation :: No Ethernet Card Detected
Jul 28, 2015I am installing Linux for the first time right now and I am facing a bit of an issue when it comes to network hardware driver installation. The NIC on my motherboard is a Marvel 88E1111 (computer is very old). During the installation of Debian, I got to a menu which read "No Ethernet card detected. If you know the name of the driver needed by your Ethernet card you can select it from the list", then provides me with said list of driver names.
However, the only driver I could find that came close the NIC I am using was one called just "Marvel", and selecting actually didn't do anything (screen flashes blue and returns me to the same menu). So I continued by selecting the "none of the above" option, and now the new menu reads: "A driver for your hardware is not available. You may need to load drivers from removable media (...)". So I thought I should google for the drivers and see what I can find. The official site of the company that made my NIC doesn't even list my model in their drivers' list (to be expected since it is so old).
Then I found this: URL.., but I was expecting more of a download than the source code itself.
Debian Installation :: CD Cannot Find Ethernet Card?
Aug 27, 2011I'v just brought a notebook computer with a CPU i7 2630QM. I install debian 6.0.2.1 via CD driver, but it failed to success. The probles are three, (1).it reported "cannot find ethernet card" ; (2). It reported "cannot install continue" after the diskpartion step have been successed; (3). It said "netinstall may be a choice", so I say "Yes" and It really downloading something (543 files) and successed . After reboot, I loggin and cannot link to the internet. There is no such files ralated to netware config and I'm not able to config that, for I'm always only a bar finder in an meau.(shy a little,but this is ture). I do it 4 times and the situation and results are the same that I got a smallest netinstalled debian system on my computer and I cannot play music, cannot link to internet. I wonder: How could I install a real debian on my computer? Need I download anther version of iso file or do something that I do not know to makes it works. I can burn an iso image to a real CD by my old computer. I can also install OS such as mint via USB flash drive. In the computer Highly-Orangized world (already-wisdomed world), I have a body already but I've never been installed a sprit or a soul. So I really need to learn from you, from the great debian bbs, learn something of vital importance to take me into wise and freedom.
View 8 Replies View RelatedDebian Installation :: Didn't Recognize Ethernet Card
Sep 15, 2010I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.
I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?
Debian Installation :: Can't Get Pci Express Ethernet Card To Work
Dec 22, 2010I have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.
I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.
[code]....
Debian Installation :: Installer Doesn't Detect Ethernet Card
Dec 19, 2010I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
View 14 Replies View RelatedUbuntu Installation :: Ethernet Not Recognized
Dec 8, 2010I have installed Ubuntu 10.10 on a new hard drive on an old Acer Veriton M464 but the network adapter is not recognized.
System/Preferences/Network Connections (Wired tab) shows no connections.
Debian Hardware :: WiFi Card Not Recognized (Laptop HP 430 G2)
Sep 12, 2014I'm a brand new user of Debian, and I just bought a (too much?) new laptop, the HP 430 G2. It seems to work great for almost everything, except that I don't have any wifi available.
I tried so many different things (without any success) that it would be hard to resume. But for now, all I have is a new installation (to avoid parasite installations of weird things), and a kernel updated to 3.16. I don't know if it's useful though...
Some information from my system :
Code: Select allbonyhoax@bonybook:~$ sudo ifconfig
[sudo] password for bonyhoax:
eth0 Link encap:Ethernet HWaddr 14:58:d0:09:72:bd
inet adr:130.125.57.144 Bcast:130.125.57.255 Masque:255.255.255.0
adr inet6: fe80::1658:d0ff:fe09:72bd/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:27329 errors:0 dropped:0 overruns:0 frame:0
TX packets:3491 errors:0 dropped:0 overruns:0 carrier:0
[Code] ....
The first element I notice is that I don't have the line with "Kernel driver in use...". Which seems to indicate that there's a problem with the kernel module (is that right?). But I don't know how to fix it...
The other thing that puzzles me with these last two commands is that according to this page, my wifi card is a Broadcom BCM43142. But it's not the result I get with the lspci command.
Anyway, I'm really lost, I don't know what to do, what to check, what to install. I don't want to go by random, testing all the different solutions I see on the web blindely. This is the reason why I ask it here.
Debian Hardware :: Sound Card Is Not Recognized By System
Oct 14, 2014I've got a problem on my Debian, I've tried installing all the correct alsa packages and all packages that have the word sound or audio description. The problem that is happening here is that when I go into settings and click on sound in Gnome, it appears to have a dummy output and in fact, a few weeks ago, the sound was working properly. Now, I believe, that after an update, the sound card was not recognized. Used the lspci command in root mode, and showed my sound card which is onboard. I'll leave the model below it, because I've tried everything and could not solve anything.
Code: Select allroot@debian:/home/weiller# lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
[code]....
Debian Hardware :: Graphic Card Intel HD4400 Not Recognized
Sep 15, 2014I'm trying to make things work on my laptop. Almost done, but there is one hardware issue left. I have a Intel HD4400 graphic card. But it seems that it is not recognized. I had an issue loading Gnome3.
Code: Select allGNOME 3 Failed to Load
Unfortunately GNOME 3 failed to start properly and started in the fallback mode.
This most likely means your system (graphics hardware or driver) is not capable of delivering the full GNOME 3 experience
Another thing :
Code: Select all$ grep EE /var/log/Xorg.0.log
[ 29.117] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
Also, if I go in "applications" ->"system tools" -> "Preferences" -> "System settings" and then in "Details, under Graphics I have "Drivers : unknown", "Experience : Fallback".
And as a consequence, I can't use dual-screen. If I plug another sreen, I have an exact copy, not even with a good resolution.
I search on the web for solutions, but I didn't understand much. I don't know what Xorg is, x-window, etc...
Debian Configuration :: Squeeze No Detect Ethernet Card
Aug 17, 2010i install devian squeeze with the netinstall iso, all work fine except for the auto-detect of my ethernet card.i have a mother asrock p4i45gv with an onboard ethernet card realtek rtl8139/810x family fast ethernet NIC.i try everithing, the ifconfig shows only lo, but ifconfig -a shows a eth0 any ideas?
View 12 Replies View RelatedDebian Hardware :: Unable To Browse Web Using Ethernet Card
Jan 19, 2016Just turned on my computer after being away for a month and I am unable to browse the web when connected using my ethernet card.Skype is able to work fine and I am able to ping my router yet both Iceweasel and Chrome are unable to connect to any websites. Apt-get did not work as well, and Chrome states that there is an error with the DNS lookup, which lead me to try:
# /etc/init.d/nscd restart
yet it didn't work. I am able to browse the web normally when connected using the wireless card.
Debian Hardware :: Connecting To Device With Ethernet Card
Mar 18, 2011I just did a fresh install of Squeeze with a KDE desktop on my computer. I use this computer to run an instrument in my lab. The instrument is connected to my computer through an ethernet card. Since my reinstall I cannot figure out how to get my computer and instrument communicating again. I'm guessing that I need to somehow tell my computer to connect to the device, but I don't know how. Here is my interface configuration:
[Code].....
I think my instrument is connected to eth2, which does not show any inet addr or Bcast ip, so I'm guessing that is a problem. How do I fix this?
Debian Hardware :: Network Card Not Recognized : On Intel DH57JG Motherboard?
Jul 20, 2010I bought a Mini ITX motherboard Intel DH57JG bu the installation DEBIAN does not recognize the ethernet card.
View 9 Replies View RelatedDebian Configuration :: Ethernet Card And DSL Modem - Internet Setup?
Feb 13, 2010I am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?
View 5 Replies View RelatedDebian :: How To Check The Ethernet - Wireless Chipset And Video Card
Nov 5, 2010Out of curiosity, in linux, how do we check:
- The make/type of ethernet card
- The wireless chipset
- The video card
Used in a computer?
Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?
Feb 8, 2011I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.
DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)
The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).
Debian Configuration :: Ethernet Card Missing/Compile Latest Kernel?
Dec 17, 2010This may sound ridiculous, but after installing Debian 5 (from CD 1) in my laptop, ASUS UL80VT, it fails to detect the Ethernet device. The device is "Atheros AR8131 PCI-E Ethernet Controller". I guess the problem comes with the old kernel of version 5. I was intending to compile the latest kernel anyway. But the problem is is there any heads up i need to download the kernel and trying to compile it? Is there anyone who uses Debian on UL80VT. If there is, does it works okay?In short I want to compile the latest kernel, hoping it will fix the Ethernet device. There are installers available with the latest kernel. But I want to do it on my own.
View 4 Replies View RelatedUbuntu :: Sd Card Not Recognized - How To Make It Recognized
Jun 2, 2010I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies View RelatedUbuntu Installation :: After Installing - 10.4 - Driver For My Wireless Network Card Isn't Recognized
Sep 29, 2010I have recently installed Ubuntu 10.04 beside my Windows XP on my laptop:
Dell XPS 1330
I`m now facing some problems with my new OS :
1. The driver for my wireless network card isn't recognized although I have installed the recommended driver which was in Ubuntu Hardware Driver section.
2. When I connect my laptop to my TV using HDMI port, the screen is OK but there is no sound!
3. When by any reason my network cable is unplugged, the whole network service goes down and I have to restart the system.
lspci results:
Installation :: Can't Get MCP73 NVidia Ethernet Card To Work In Fedora 10
Dec 7, 2008I just installed Fedora 10 on a brand new machine with an on-board nvidia MCP73 ethernet card. Now, when I initially boot up the box after installation, the card comes up and gets a DHCP address just fine. When I go to edit the network settings (change to static) the NIC dies. I don't think I have the proper driver. Does anyone know a) where to get the driver and b) how I can install it?
[code]...
Debian :: Install Ethernet Network Card Module For Notebook Toshiba QOSMIO X500-121 64-bit On Lenny?
Feb 16, 2011How to install Ethernet network card module (driver) for the Notebook Toshiba QOSMIO X500-121 64-bit on Lenny?
View 1 Replies View RelatedUbuntu Installation :: No Sound On EMachines Notebook?
Mar 13, 2011I just installed Ubuntu 10.4.2 on a M622 eMachines notebook. I have no audio what-so-ever even after installing an ALSA mixer and updating everything. I can control every option as if the sound drivers were functioning fine. I've made sure nothing is muted and I've checked the headphones as well. What's strange is that the microphone input works and I'm able to record with sound recorder (according to the audio in level meter). The only thing I can think of is that the wrong drivers are installed but I'm not sure how about changing them or what to change them to. Here is a copy of my ALSA report:
Code:
!!Linux Distribution
!!------------------
Ubuntu 10.04.2 LTS
l DISTRIB_ID=Ubuntu DISTRIB_DESCRIPTION="Ubuntu 10.04.2 LTS"
[code]....
Ubuntu Installation :: Live CD Or Install Will Not Run On Old EMachines Desktop?
Jul 11, 2010I'm attempting to install Ubuntu on my girlfriend's old desktop. Her gateway laptop's motherboard just died on her, and until we can figure out a real solution she's using this old desktop that was running Windows XP. It was her parent's and it's an eMachine. So, meh. It's whatever.
I have an Ubuntu disc from Canonical and one from burning the .iso image. I've been fighting with it all evening trying to just get the thing to boot. It starts up, shows a purple screen with an Ubuntu logo on the bottom. If I don't hit Enter it will go into a crazy cycle of black screen command line things. It says various errors, but moves too fast for me to see anything that is actually happening. However, if I do hit Enter it takes me to the "Try Ubuntu without installing, etc." screen.
No matter what I hit from the selection, it goes to the black screen with random command line entries floating about. Various error, various actions being done. If I hit to run as Live CD or Install it, it will eventually stop and say "Welcome to Ubuntu! *insert website address here*" and give me the chance to type in commands.
ONCE during the power on/power off cycles of me fighting did the Live CD actually run. It ran nicely, and I clicked the icon to install Ubuntu and it got to 49% complete and said there was an error with the disc. I installed Ubuntu on my desktop last week with the same disc flawlessly. It ran with the real Ubuntu disc, the burnt ones do nothing.
I could tell you system specs but Windows was erased during the Live CD stint and there are no stickers on the front to tell you. But I can crack it open and look if needed.
Ubuntu Installation :: Black Screen After Upgrade 10.10 To 11.04 Acer EMachines?
Apr 30, 2011Got a black screen after upgrade from 10.10 to 11.04. My Computer is an Acer eMachines E527 [URL]
I) Just started Computer normally, using new Kernel and 11.04 then the screen became black as before. Waited until Harddisk (Light) wouldn't work too much and boot seemed to be over.
II) IN BLIND FLIGHT (without seeing anything, since screen is black):
1) opened the Terminal using Ctrl+Alt+F2
2) typed my "Username" (enter)
3) typed my "Password" (enter)
4) typed "sudo setpci -s 00:02.0 F4.B=30" (enter)
5) typed my "Password" (enter)
III) Now it is not really satisfactory to do this over and over again each time restarting my computer. Is there any way to use a batch or use the grub to setpci ? I'd like to install 11.04 with an USB Stick on a similar computer - how do I setpci there?
Fedora Networking :: 14 Can't Connect To SpeedTouch 585 - Either Wireless Broadcom Card Or The Wired Ethernet Card
Dec 4, 2010Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Ubuntu Networking :: Ethernet Port Not Recognized?
Jul 27, 2011I am running 11.04 on a Dell Inspiron 1501 (the first gen.). I was using my Ethernet port to connect to the internet until about two weeks ago - suddenly the system no longer recognised that port even existed and just kicked me offline. I am able to get online now with a wireless card (replaced the broadcom card, that was a whole different can of worms...).
why my system is unable to connect with the Ethernet port? If I plug in the cable nothing happens.
Ubuntu Networking :: No Ethernet Connection Recognized - No Such Device
Jun 17, 2010I just installed 10.04 on my new netbook and I am suprised to see that the ethernet is not recognized. When I run
Code:
ifconfig eth0
the result is
Code:
no such device
The machine was working fine before I installed Ubuntu. I am suprised to see this problem as I have already installed it on a few machines without any problem such as this.
CentOS 5 Hardware :: Broadcom Ethernet Controller Not Recognized?
Sep 7, 2010Running CentOS 5
System see the device with an lspci, yet will not load
Vendor:Device ID is 14e4:1691
Broadcom BCM57788 on board ethernet controller
Cannot find driver or anyone that seems to support it. Am I missing something?
This is in a Dell computer.