Hardware :: Install Kernel Module For New Usb Wifi Dongle?
Apr 13, 2011I:m trying to install the module RTL819CU onto my kernel so that I can use my wifi usb dongle. When I try to install it I get a make error 2.
[code].....
ADVERTISEMENT
Debian Configuration :: New Kernel Requires WiFi Module Update
Jun 15, 2010Squeeze's latest update has upgraded my kernel from 2.6.32-3-686 to 2.6.32-5-686.My wireless stopped working and then I realised that I had to rebuild the wifi modules. I had followed this earlier.URL...For this new kernel, which I step of the process should I repeat? Rebuild module? Or just do a modprobe?
View 4 Replies View RelatedDebian Hardware :: With Kernel Upgrade To 3.16.0 Lost WiFi Module
Jun 7, 2015I got notebook HP Pavilion 15-p171nr. Have installed Debian Wheezy. There was some problems, for example with screen brightness (backlight) and it was solved here: [URL] .....
The problem was solved with upgrading kernel 3.2.0 to 3.16.0 from backports... but... with these steps i lost my wi-fi wl module...
It was downloaded somewhere, compiled and worked well until kernel upgrade... For the current moment i can not compile it.
My hardware:
Code: Select all08:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
Within last steps official wiki recommends (my device is in the supported list): [URL] .... but I got problems with compilation... here they are:
I have installed correct linux-headers:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# apt-get install -t wheezy-backports linux-headers-amd64
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-amd64 is already the newest version.
[Code] ....
Then I am trying to reconfigure already installed broadcom-sta-dkms package and here is what I got:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# dpkg-reconfigure broadcom-sta-dkms
------------------------------
Deleting module version: 5.100.82.112
completely from the DKMS tree.
------------------------------
Done.
Loading new broadcom-sta-5.100.82.112 DKMS files...
Building only for 3.16.0-0.bpo.4-amd64
[Code] ......
General :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27
Jan 30, 2011I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
Ubuntu :: Load Module On Usb Dongle Insert?
Nov 12, 2010I have a problem with a wireless mouse on my laptop running Ubuntu 10.10. If thw receiver is plugged during boot, it works out of the box. But if I plug it in afterwards, I have to manually do
Code:
sudo modprobe usbhid
for it to start workin.
My question is how to automatically load a module when a usb device with a given id is inserted?
Hardware :: WiFi USB Dongle Not Seen
May 10, 2010I'm running Debian Squeeze on my desktop computer. I have a USB dongle of italian brand Dikom (they just re-brand Chinese products). It has a Zydas ZD1211B chip. Now, according to this, drivers for that chip have been included in all distros for a while. And yet, Debian doesn't want to know about my dongle. Wicd can't connect, the system doesn't seem to do anything with hotplugging when it's inserted, and lspci doesn't list it. What to do (short of threading Ethernet cable from one end of my home to the other)?
View 8 Replies View RelatedHardware :: Wifi Usb Dongle Don't Support
Nov 9, 2010I'm looking for a usb dongle which allows an extended wifi range (usually looks like a usb stick with a small antenna on top). Buffalo and Planex have both replied they don't support linux. Alfa makes one but I cannot get it locally.
View 6 Replies View RelatedGeneral :: Install New Module On Newly 2.6.35-rc5 Kernel?
Jul 16, 2010Recently I was trying to look into vmware pvscsi modules for newly announced linux kernel 2.6.35-rc2. I compiled the kernel with option: make oldconfig where it asked me for various interactive options and all I did is Kept pressing the Enter ENTER key(Donno if that is the correct way to slect default ).The Kernel Compilation anyway went fine and I can see new kernel at grub screen, booted and it went fine.Now when I explored I found that nor the vmware_balloon and vmw_pvscsi modules are present which means I need to install these modules.I came to know that recently a new version of the vmware memory drivers being included through this page:
[URL]
where you can see an entry like:
Code:
MODULE_AUTHOR("VMware, Inc.");
MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
-MODULE_VERSION("1.2.1.0-K");
+MODULE_VERSION("1.2.1.1-k");
Doesn't it mean that the new kernel has new driver version inboxed?Also, I tried to install modules through modprobe and insmod(seems that this doesnt work) but couldnt do that.
Red Hat :: Install A Module Without Recompiling Kernel In Centos?
Apr 24, 2011if i wanted to just download and install a module, how does centos have it where i don't have download the source and recompile the whole kernel withthe module enabled? i read about install kernel-devel but nothing much more on using it. for instance, if i wanted to download ext4 module and have the kernel use it?
View 1 Replies View RelatedGeneral :: Adding A New Kernel Module To Wireless Driver Module?
Apr 22, 2010I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedGeneral :: Linksys WiFi Usb Dongle And Woes?
Jun 3, 2010I have a Linksys WUSB54GC usb dongle and I have exhausted every thing I know about making this thing work in linux. I am using Fedora 13. Since it is not ready I can not view any networks. Any ideas would be great.
lspci -v does not list the the item. tail of the system log
Jun 2 20:14:35 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 8
Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device found, idVendor=1737, idProduct=0077
Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jun 2 20:14:35 localhost kernel: usb 1-7: Product: 802.11 g WLAN
Jun 2 20:14:35 localhost kernel: usb 1-7: Manufacturer: Ralink
[Code]...
Ubuntu Networking :: Getting USB WiFi Dongle To Work?
Nov 19, 2010I've bought this Blumax USB WLAN adapter 9009 (ID 148f:2573 Ralink Technology, Corp. RT2501/RT2573 Wireless Adapter). I was specifically happy to read in its specs that it supports Linux [URL].
However, it turned out that the co-packaged CD drive doesn't contain anything Linux-related, and the support page online has gzip package with many files I don't know what to do with [URL]. The online support swallowed my query and hasn't returned any answer.
So, now I am wondering what to do. I don't feel so competent as to be able to compile the drivers on my own, specifying several specific parameters. At least it doesn't compile with default params. how to move forward with this. Apart from returning the device, because I'm too far now from the place where I bought this.
CentOS 5 Hardware :: Which WIFI USB Dongle Works Best?
May 8, 2009could anyone here report from experience which WIFI USB dongle "just works" with Centos 5.2?
OpenSUSE Install :: Apparmor Module Does Not Load On Kernel-rt?
Aug 6, 2010I have just reinstalled OS 11.2 but this time the 64bit system variant. I installed the real-time kernel and saw that the apparmor module reported an error and wasn't loaded. I have never looked into apparmor and only knows it has something to do with security, and thus I wonder if it is important to do something with this issue? I plan to use the kernel-rt and have more or less always used a variant of this kernel flavour, often self built. Though I can not recall having seen that error before and I have not used a 64bit system before
View 2 Replies View RelatedUbuntu :: 11.04 - Get And Install Newer Kernel Module For Fglrx?
Apr 30, 2011Excerpt of Xorg.0.log output:
[Code]....
September 20 2010? Is there a newer kernel module for fglrx? How can I get and install it?
Ubuntu Networking :: Installing - Wifi Dongle Driver ?
Sep 25, 2010I have just installed Ubuntu on an old laptop for a little bit of programming and to gain some familiarity with linux. Im looking forward to getting to know my way around the OS
Unfortunately, the wireless card (for wifi) on this laptop is broken, so instead I have been using a wifi usb dongle on windows. I am having some trouble installing this dongle in ubuntu, i cant find a driver for it!
Its a "MicroNext MN-WD546J 54M Wireless Adapter"
[url]
I have my modem connected directly at the moment via LAN, and this works no problem, but id like to get it connected wirelessly
Hardware :: Get The AWU212n Wifi Dongle To Work With Debian?
Sep 6, 2010I have a AWU212n wifi dongle that I would like to use to get a debian computer to connect to connect to the network. There aren't any linux drivers and it seems to need a realtek program to connect. I'm running debian Squeeze. Wine doesn't work to run the installer, I don't know if I copied the realtek program from a windows computer and ran it with wine if it would work then or not.
View 1 Replies View RelatedHardware :: Plug Out And In Wifi Dongle At Every Boot To Get Detected
May 28, 2011I just bought a Belkin F7D2101 USB Wifi N dongle, it works great, but every time I start my computer, it's not detected. At least, my network applet shows no network adapter. I have to unplug and plug it back in on another USB port to get detected. Then, my network dmon automatically connects to my wifi network.
View 4 Replies View RelatedNetworking :: Netgear WG111v2 Wifi Dongle Drivers?
Oct 30, 2010I have a Netgear WG111v2 Wifi dongle, sadly there is no linux drivers for it. The only solution i can find is to use Ndiswrapper.
Will it be a major challenge writing a Linux driver ?
Where should i start ?
NB. I want to write my own driver for the following reasons:
Get a better understanding of Linux Device drivers. Probably, get a better understanding of C/C++ and Linux in general.
General :: WiFi Dongle For Ubuntu - Compatible With Windows ?
Jun 28, 2011I need a WiFi dongle for Ubuntu and most people at the shops only know if its compatible with windows
View 2 Replies View RelatedDebian :: How To Install Iptables-persistent As Loadable Kernel Module
Nov 10, 2015I'm working on my iptables rules on a debian 8 vps and I tried to install iptables-persistent but I was told "Unable to locate package"...
Where can I get this so that I may save my rules for reboot?
OpenSUSE Install :: 11.2 (64bit) - Kernel Module Will Not Start In Vbox
Jan 23, 2010I Just loaded 11.2 64 bit, initially the kernel was "default", however, after I installed my Nvidia drivers it changed to desktop, I'm not sure I understand? In GRUB my screen lists it as desktop. Is "default" somewhere? Was it replaced? Things seem to be working alright in most cases although I'm having inordinate problems with "virtual Box" and Vmware server. In Vbox the kernel module won't start.
View 7 Replies View RelatedOpenSUSE Install :: Kernel Upgrade On 11.1 - Cannot Find Module After Reboot
Nov 10, 2010I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
OpenSUSE Network :: Wifi And Usb Dongle Modem Doesn't Working?
Apr 15, 2010my wifi and dongle usb modem both are not working doesn't work on dell laptop inspiron 1520 withn opensuse 11.2.
View 1 Replies View RelatedHardware :: FATAL Error On Interfacing USB Wifi Dongle (Fedora 8)?
Jun 14, 2010Trying to Interface USB Wifi Dongle with Linux (Fedoracore 8 While giving modprobe zd1211rw following FATAL Error throws;
[root@localhost linux-2.6.22.18]# /sbin/modprobe zd1211rw //////////////modprobe command
WARNING: Error inserting ieee80211_crypt (/lib/modules/2.6.23.1-42.fc8/
kernel/net/ieee80211/ieee80211_crypt.ko): Invalid module format
WARNING: Error inserting ieee80211 (/lib/modules/2.6.23.1-42.fc8/
kernel/net/ieee80211/ieee80211.ko): Invalid module format
[Code]...
Software :: FATAL Error On Interfacing USB Wifi Dongle With Fedora 8
Jun 14, 2010Trying to Interface USB Wifi Dongle with Linux (Fedoracore 8)
While giving modprobe zd1211rw following FATAL Error throws;
How to overcome this FATAL Error? What prerequisites need to check?
OpenSUSE Wireless :: Can't Connect Asus N13 Wifi Dongle (Ralink RT2870 )
Nov 7, 2010Im a Linux newbie and am running OpenSuse 11.3 (Gnome, 2.6.34.7-0.5-desktop Kernel) and Ive an Asus N13 wifi dongle (linux compatible). I currently connect using my laptopś internal wifi but I bought the dongle due to trouble with weak signal. It came with some sort of code that can be "compiled" but I havent got a clue how to do that (and I have been researching this matter for quite some time now). I then came across a post where someone with the same USB stick created and added only two small files to his filesystem and it worked...for him (maybe becasuse he was on a different Distro )
Ralink RT2870 USB Stick and created the two files mentioned in the post (network_drivers.rules and network_drivers.conf) and placed them in ETC... etc, etc! I rebooted the system but NetworkManager only lists it as "device not ready" ... So now back to square one.
[Code]...
OpenSUSE Install :: Boot.preload Complains About The Missing Preloadtrace.ko Kernel Module?
Nov 23, 2009I've built my own kernel and now boot.preload complains about the missing preloadtrace.ko kernel module.
Where can one find the source for this module?
Software :: Audio Driver Install - ERROR - NVIDIA Kernel Module Was Not Created
May 29, 2010I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).
It ended up in this error.
I am attaching nforce-installer log for your details.
Code:
By default I can use internet (without network drivers installed), how is this possible? And why not audio?
OpenSUSE :: Kernel Module / Building VirtualBox Guest Additions Kernel Modules - Failed?
Feb 10, 2010I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
