I'm working on my iptables rules on a debian 8 vps and I tried to install iptables-persistent but I was told "Unable to locate package"...
Where can I get this so that I may save my rules for reboot?
I upgraded my kernel in my Debian Lenny to version 2.6.32-bpo.4-amd64 to fix a problem with a software and ALSA-related issues. The thing is that now, when I boot, eth1 is not enabled and I have to "load" (I guess) the driver each time. To do this, I go to the folder where all the files for the drivers are and I run:
modprobe lib80211
and then
insmod wl.ko
That I got from the readme file. That gets the wireless working perfectly again, but when I reboot the wireless is dead again and I have to run the commands above again. I imagine that what I should do is to build the driver again, for my new kernel. However, according to the readme file, before I need to install linux-headers-generic and build-essential. With build-essential, it says it's already the newest version, and with the linux-headers, I don't know which one should I install for my kernel! I thought it would be the linux-headers-2.6.32-bpo.4-xen-amd64, but when I tried that, this is what happened:
debian:/home/hernan/Programas/hybrid_wl# apt-get install linux-headers-2.6.32-bpo.4-xen-amd64
Reading package lists... Done
Building dependency tree
[code]....
So the warning says something about the MODULE_LICENSE being missing... how to build the driver again to make it load each time I boot?
At linux-kvm.org it is stated: "KVM ... consists of a loadable kernel module, kvm.ko that provides the core virtualization infrastructure" and yet there's no mention of Xen, which runs as the hypervisor with KVM. The site seems to be implying the module is the hypervisor. My question to you is: What is the relationship between KVM and Xen on a server that is "running KVM"?
View 2 Replies View RelatedIs there a way to programmatically determine whether a particular driver support is built-in rather than a loadable module? I'd be grateful if somebody would share how. I have written a shell script using the RTC (real time clock). I can check whether the rtc-cmos kernel module exists and load the module accordingly as needed, but I don't know how to determine when the driver is built-in. Of course, if the driver is built-in then the module does not exist.
I seem to recall there is a method to query the kernel config file (/proc/config.gz), through which I probably could grep for the CONFIG_RTC_DRV_CMOS parameter. I also can check whether /proc/driver/rtc exists. If that file exists then either the driver is built-in or the module was loaded.I realize the rtc-cmos driver is built-in with the standard Debian kernel build, but I still would like a way to query where the driver is supported.Is there a straightforward or direct method to query the kernel whether a particular driver is built-in?
I wrote a hello world loadable module and tried to pack it as a .deb package. While trying to do so, I came across some technique that were applicable to userland applications.
Is there any way to pack a loadable module in to .deb package?
Here is my problem:
I need to enable the statistic module in iptables.
I had Fedora 13 32 bits, iptables-1.4.7-2 and kernel 2.6.18
But kernel 2.6.18 does not support statistic module.
So, I upgraded from Fedora 13 to Fedora 14.
Now I have Fedora release 14 (Laughlin) and Kernel 2.6.18
I did this to upgrade: url
Also, I did this too.
# yum update kernel
No Packages marked for Update
How can I ugrade to newer kernel?
installing and setting the iptables on U 8.04 LTS? currently iptables is not installed nor as package nor included as kernel module.
View 4 Replies View RelatedI need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
View 2 Replies View RelatedI recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
So i installed debian squeeze in virtualbox with xfce and i thought that it was persistent. when i powered down the virtual machine and started it up again later I only had the option of installing it again. Do i use save state to keep it in the installed stage? would i have to do that each time i made a change? i want to make sure so that i don't keep having to re install it.
View 7 Replies View Relatedmy wireless doggle is not suppoerted out of box on squeeze.It's based on zd1211rw,just lack the vendor and product id.how can I hack the source and rebuild the driver module?
View 1 Replies View RelatedI'vd a problem with loading modules. Booting gives the this error:
Code: Select alllucas@debian8-1:~$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
[Code] ....
Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.
I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.
I've reinstalled Debian 8 several times. Still, both errors stay.
The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.
I'm having problems to compile XIllybus kernel module. As this guide explains, [URL] ..... (on the top of page 8 of 25) I unpackaged the tar.gz file and compiled the kernel module by typing the make command in the proper path. When I compile the module with make command, I get the following error:
make -C /lib/modules/3.16.0-0.bpo.4-amd64/build SUBDIRS=/home/xillybus/module modules
make: *** /lib/modules/3.16.0-0.bpo.4-amd64/build: No such file or directory. Stop.
make: *** [default] Error 2
/lib/modules/3.16.0-0.bpo.4-amd64/build path does not exist. What does it mean? Should I have to install some kernel packet? www does not work for me.
I'm trying to build the kernel module for dvbhdhomerun. The problem is the linux kernel headers provided by Debian do not have the dvb header files. Trying to set up my own kernel source tree to use is not working out so well.
I'm following the instructions in the Debian section here: [URL] ....
My first try compiled, but the modules ender up under /lib/modules/3.2.51/extra instead of /lib/modules/3.2.0-4-amd64/extra. Why?
I tried to start over, but noticed this while running apt-get source linux-image-3.2.0-4-amd64:
Code: Select allReading package lists... Done
Building dependency tree
Reading state information... Done
Picking 'linux' as source package instead of 'linux-image-3.2.0-4-amd64'
NOTICE: 'linux' packaging is maintained in the 'Svn' version control system at:
svn://svn.debian.org/svn/kernel/dists/trunk/linux/
[Code] ....
The failure to verify the signature has me concerned, but beyond that, what do I do about the different version number when compiling and installing the kernel modules?
I installed debian 8 on a 16 GB usb drive using this guide. I used a debian 8.2 64-bit image with mate. If I were to get a larger usb drive, would I be able to transfer everything from the 16GB drive to it? How?
View 1 Replies View RelatedI built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type
Code: Select allsudo modprobe 8821au
I get a
Code: Select allmodprobe: FATAL: Module 8821au not found..
But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:
Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko
it seems to work:
Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.
But lsmod doesn't show me the module after that.
I also added
Code: Select all./kernel/drivers/edimax/8821au.ko
to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.
So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.
I can't get the nVidia kernel module built. Each time DKMS runs to install it (I'm trying to install it with the nvidia-kernel-legacy-173xx-dkms package on ), the build fails with a different error. Here is an exemple /var/lib/dkms/nvidia/173.14.27/build/make.log (I have a geForce FX 5200 on the computer I'm trying to install the nVidia driver):
DKMS make.log for nvidia-173.14.27 for kernel 2.6.32-5-686 (i686)
dimanche 24 avril 2011, 17:28:09 (UTC+0200)
make: entrant dans le rpertoire /var/lib/dkms/nvidia/173.14.27/build
[code]....
I'm trying to compile a Linux kernel module called hello-2.c using the command "make -C /lib/modules/$(uname -r)/build M=${PWD} modules" (without the quotes) (which I found online), and the following is the (seemingly successful) output.:
Code: Select allmake: Entering directory `/usr/src/linux-headers-3.2.0-4-amd64'
Building modules, stage 2.
MODPOST 0 modules
make: Leaving directory `/usr/src/linux-headers-3.2.0-4-amd64'
However, I don't see a hello-2.ko (in the same folder or anywhere else for that matter). I'm Using Debian GNU/Linux 7.6.
Everything I am doing is within a folder/directory called "thefolder" (without the quotes) in the "/tmp" directory (without the quotes).
Why I can't see a hello-2.ko, and what to do to get it?
Running Debian lenny.I want Debian to stop from loading certain kernel module at startup. For now I tried adding "blacklist my_module" line in /etc/modprobe.d/blacklist file with no luck. Also I tried to add line above into some new file in /etc/modprobe.d directory - not working.How do I blacklist kernel module in Debian lenny ?
View 4 Replies View RelatedI'd like to change the existing kernel module (driver) file and compile a custom kernel.
Is this the correct way:
Recently I was trying to look into vmware pvscsi modules for newly announced linux kernel 2.6.35-rc2. I compiled the kernel with option: make oldconfig where it asked me for various interactive options and all I did is Kept pressing the Enter ENTER key(Donno if that is the correct way to slect default ).The Kernel Compilation anyway went fine and I can see new kernel at grub screen, booted and it went fine.Now when I explored I found that nor the vmware_balloon and vmw_pvscsi modules are present which means I need to install these modules.I came to know that recently a new version of the vmware memory drivers being included through this page:
[URL]
where you can see an entry like:
Code:
MODULE_AUTHOR("VMware, Inc.");
MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver");
-MODULE_VERSION("1.2.1.0-K");
+MODULE_VERSION("1.2.1.1-k");
Doesn't it mean that the new kernel has new driver version inboxed?Also, I tried to install modules through modprobe and insmod(seems that this doesnt work) but couldnt do that.
if i wanted to just download and install a module, how does centos have it where i don't have download the source and recompile the whole kernel withthe module enabled? i read about install kernel-devel but nothing much more on using it. for instance, if i wanted to download ext4 module and have the kernel use it?
View 1 Replies View RelatedSqueeze's latest update has upgraded my kernel from 2.6.32-3-686 to 2.6.32-5-686.My wireless stopped working and then I realised that I had to rebuild the wifi modules. I had followed this earlier.URL...For this new kernel, which I step of the process should I repeat? Rebuild module? Or just do a modprobe?
View 4 Replies View RelatedI have an nvidia card and a motherboard with an internal sound card.
The nvidia card hogs alsa, and it's really obnoxious because I don't use hdmi for audio (or video, for that matter, crt all day)
I would normally just blacklist the module that the card is using, but I hit a hiccup...
This is the readout for the gfx card from lspci -v
Code: Select all01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 84bb
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [60] Power Management version 3
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Capabilities: [78] Express Endpoint, MSI 00
Kernel driver in use: snd_hda_intel
And this is the readout from the motherboards internal audio card
Code: Select all00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
Subsystem: Gigabyte Technology Co., Ltd Device a132
Flags: bus master, slow devsel, latency 32, IRQ 16
Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Kernel driver in use: snd_hda_intel
Since they have the same kernel module, all the internet advice is pretty much moot, because I can't figure out how to effectively shut off one without killing the other as well. Huge PITA.
I got notebook HP Pavilion 15-p171nr. Have installed Debian Wheezy. There was some problems, for example with screen brightness (backlight) and it was solved here: [URL] .....
The problem was solved with upgrading kernel 3.2.0 to 3.16.0 from backports... but... with these steps i lost my wi-fi wl module...
It was downloaded somewhere, compiled and worked well until kernel upgrade... For the current moment i can not compile it.
My hardware:
Code: Select all08:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
Within last steps official wiki recommends (my device is in the supported list): [URL] .... but I got problems with compilation... here they are:
I have installed correct linux-headers:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# apt-get install -t wheezy-backports linux-headers-amd64
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-amd64 is already the newest version.
[Code] ....
Then I am trying to reconfigure already installed broadcom-sta-dkms package and here is what I got:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# dpkg-reconfigure broadcom-sta-dkms
------------------------------
Deleting module version: 5.100.82.112
completely from the DKMS tree.
------------------------------
Done.
Loading new broadcom-sta-5.100.82.112 DKMS files...
Building only for 3.16.0-0.bpo.4-amd64
[Code] ......
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI have just reinstalled OS 11.2 but this time the 64bit system variant. I installed the real-time kernel and saw that the apparmor module reported an error and wasn't loaded. I have never looked into apparmor and only knows it has something to do with security, and thus I wonder if it is important to do something with this issue? I plan to use the kernel-rt and have more or less always used a variant of this kernel flavour, often self built. Though I can not recall having seen that error before and I have not used a 64bit system before
View 2 Replies View RelatedExcerpt of Xorg.0.log output:
[Code]....
September 20 2010? Is there a newer kernel module for fglrx? How can I get and install it?
I:m trying to install the module RTL819CU onto my kernel so that I can use my wifi usb dongle. When I try to install it I get a make error 2.
[code].....