Debian Hardware :: With Kernel Upgrade To 3.16.0 Lost WiFi Module

Jun 7, 2015

I got notebook HP Pavilion 15-p171nr. Have installed Debian Wheezy. There was some problems, for example with screen brightness (backlight) and it was solved here: [URL] .....

The problem was solved with upgrading kernel 3.2.0 to 3.16.0 from backports... but... with these steps i lost my wi-fi wl module...

It was downloaded somewhere, compiled and worked well until kernel upgrade... For the current moment i can not compile it.

My hardware:
Code: Select all08:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)

Within last steps official wiki recommends (my device is in the supported list): [URL] .... but I got problems with compilation... here they are:

I have installed correct linux-headers:

Code: Select allroot@hpnote:/home/yaroslav/Загрузки# apt-get install -t wheezy-backports linux-headers-amd64
Reading package lists... Done
Building dependency tree       
Reading state information... Done
linux-headers-amd64 is already the newest version.

[Code] ....

Then I am trying to reconfigure already installed broadcom-sta-dkms package and here is what I got:

Code: Select allroot@hpnote:/home/yaroslav/Загрузки# dpkg-reconfigure broadcom-sta-dkms
------------------------------
Deleting module version: 5.100.82.112
completely from the DKMS tree.
------------------------------
Done.
Loading new broadcom-sta-5.100.82.112 DKMS files...
Building only for 3.16.0-0.bpo.4-amd64

[Code] ......

View 4 Replies


ADVERTISEMENT

Debian Configuration :: New Kernel Requires WiFi Module Update

Jun 15, 2010

Squeeze's latest update has upgraded my kernel from 2.6.32-3-686 to 2.6.32-5-686.My wireless stopped working and then I realised that I had to rebuild the wifi modules. I had followed this earlier.URL...For this new kernel, which I step of the process should I repeat? Rebuild module? Or just do a modprobe?

View 4 Replies View Related

Debian Configuration :: Dell D620 Wifi Lost After Installed 2.6.38 Kernel In Squeeze

May 9, 2011

Hi,I'm using a Dell Lattitude D620 laptop. I just installed the latest kernel 2.6.38 in my Squeeze amd64 :

Output of uname -r
2.6.38-bpo.2-amd64

Now I'm running on new kernel,everything seems fine except my wifi ( now I'm connected through ethernet ). Before I do the process with the guide in http://wiki.debian.org/wl to activate my wifi,I'd like to ask for some advice here,is this latest kernel support my wifi card? If yes,how to activate it?

Output of lspci :

00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)

[code]....

View 4 Replies View Related

Hardware :: Install Kernel Module For New Usb Wifi Dongle?

Apr 13, 2011

I:m trying to install the module RTL819CU onto my kernel so that I can use my wifi usb dongle. When I try to install it I get a make error 2.

[code].....

View 2 Replies View Related

Ubuntu :: Lost WiFi With Upgrade To 11.4

Apr 29, 2011

I have lost wifi access with the upgrade to 11.4.Previously, the receiver icon showed on left click a menu of available networks, and on right click, available network by network settings for editing. The menu also included enable wireless connection and enable wired connection. I have wireless enabled.

But with the upgrade, the same menu appears on left click or right click, and they both show a greyed out "wireless disconnected" tab, so you can't connect from there, the tab is disabled. There's also no place else to go to find available networks or to lock into one. There also does not seem to be a place to find wired networks either.I installed my wifi network in it, and put in the correct password and set it to come on automatically, and 3x restarts did not yield any changes. Apparently network finding is disabled in this version or at least my copy.It isn't the computer: I'm on line with it now on the Windows XP side.

This is doubly problematic because if I can't get on line, I can't download a fix, and even if I could by downloading it to the Windows side, it is probably a binary with some very scripts and meticulous BASH coding or tarballing something else that I have no idea how to do even with a walk through by an expert because most of the time the experts assume I know as much about using a Linux terminal and code as they do, and I basically know absolutely nothing, it is all Greek to me from the point at which they say "open a terminal." "Go to root" might as well be said in Chinese as far as its usefulness to me. What is the plan here? A complete redo from the get go?

View 8 Replies View Related

Ubuntu Networking :: Natty Upgrade - Lost Wifi ?

May 2, 2011

After being prompted by UpdateManager, I upgraded my Compaq Presario CQ71 from 10.10 to 11.04 yesterday. Most things seem fine, except that my wifi is disabled (it was working fine in 10.10).

Here are some details:

Code:

Code:

View 1 Replies View Related

Ubuntu Networking :: Natty Upgrade With Lost Wifi?

Jun 19, 2011

Our Acer 5820T handles Natty nicely in all respects except for the wifi not working. It was fine under 10.10. It uses the Atheros ath9k driver ... details:

Code:
rick@pond:~$ uname -a
Linux pond 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

[Code]...

View 9 Replies View Related

Hardware :: B44 Module Won't Autoload After Kernel Upgrade?

Jun 24, 2009

Since I upgraded Jaunty from 2.6.28-13 to 2.6.30, I have to modprobe b44 by hand every time I boot the latter. I used the .debs in http://kernel.ubuntu.com/~kernel-pa/mainline/.I know I could just add it to /etc/modules or some .rc, but it loads without that in .28 and I really want to understand what changed (something else in /etc?) .

Code:
$ lshw -C network
...

[code]...

View 3 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

OpenSUSE Install :: Kernel Upgrade On 11.1 - Cannot Find Module After Reboot

Nov 10, 2010

I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.

Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.

View 1 Replies View Related

Fedora Installation :: Upgrade Kernel And Enable Statistic Module In Iptables?

Apr 12, 2011

Here is my problem:

I need to enable the statistic module in iptables.

I had Fedora 13 32 bits, iptables-1.4.7-2 and kernel 2.6.18

But kernel 2.6.18 does not support statistic module.

So, I upgraded from Fedora 13 to Fedora 14.

Now I have Fedora release 14 (Laughlin) and Kernel 2.6.18
I did this to upgrade: url

Also, I did this too.

# yum update kernel

No Packages marked for Update

How can I ugrade to newer kernel?

View 9 Replies View Related

Ubuntu :: Broke WiFi By Kernel Upgrade / What To Do?

Jan 13, 2010

I'm running Ultimate Edition 2.4 on an Acer Aspire 3500 lappy, yesterday I allowed my system to upgrade the kernel (from 9.10 kernel 2.6.31-17 to 2.6.31-18 generic) as per usual but when it rebooted I had no WiFi. The network manager didn't even have a wireless section, only wired, and I couldn't setup a wireless network either. If I reboot into the earlier 2.6.31-17 kernel everything is OK.
Another problem is that even tho I have no screensaver enabled and no power saving options enabled, (ie screen never disabled) after a short time of no use the screen goes blank. If within a few minutes I touch the pad or hit a key the screen returns but if it's been an hour or so nothing I do will wake it up,even tho there is still disk activity etc, and the only way to recover is with a hard reset, hold power key to reboot.

View 4 Replies View Related

Fedora Hardware :: After Upgrade Kernel Wifi Deactivated

May 10, 2011

I have problem with my wifi hardware. After upgrading kernel from 2.6.35.13-88.fc14.i686 to 2.6.35.13-91.fc14.i686, my wifi is deactivated.

I'm using fedora 14 in my netbook HP Mini 210 (wifi broadcom).

View 5 Replies View Related

Debian Configuration :: Add New AMD PCI-IDs To Kernel Module

Jul 9, 2015

I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.

Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h

From the 4.1rc1 kernel I know what to patch and where.

Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?

View 6 Replies View Related

Debian :: Rebuild Kernel-included Module?

Jun 7, 2010

my wireless doggle is not suppoerted out of box on squeeze.It's based on zd1211rw,just lack the vendor and product id.how can I hack the source and rebuild the driver module?

View 1 Replies View Related

Debian :: Failed To Load Kernel Module

Jun 23, 2015

I'vd a problem with loading modules. Booting gives the this error:

Code: Select alllucas@debian8-1:~$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

[Code] ....

Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.

I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.

I've reinstalled Debian 8 several times. Still, both errors stay.

The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.

View 12 Replies View Related

Debian :: Compiling XIllybus Kernel Module

Sep 25, 2015

I'm having problems to compile XIllybus kernel module. As this guide explains, [URL] ..... (on the top of page 8 of 25) I unpackaged the tar.gz file and compiled the kernel module by typing the make command in the proper path. When I compile the module with make command, I get the following error:

make -C /lib/modules/3.16.0-0.bpo.4-amd64/build SUBDIRS=/home/xillybus/module modules
make: *** /lib/modules/3.16.0-0.bpo.4-amd64/build: No such file or directory. Stop.
make: *** [default] Error 2

/lib/modules/3.16.0-0.bpo.4-amd64/build path does not exist. What does it mean? Should I have to install some kernel packet? www does not work for me.

View 3 Replies View Related

Debian Programming :: Building Kernel Module

Dec 8, 2013

I'm trying to build the kernel module for dvbhdhomerun. The problem is the linux kernel headers provided by Debian do not have the dvb header files. Trying to set up my own kernel source tree to use is not working out so well.

I'm following the instructions in the Debian section here: [URL] ....

My first try compiled, but the modules ender up under /lib/modules/3.2.51/extra instead of /lib/modules/3.2.0-4-amd64/extra. Why?

I tried to start over, but noticed this while running apt-get source linux-image-3.2.0-4-amd64:

Code: Select allReading package lists... Done
Building dependency tree       
Reading state information... Done
Picking 'linux' as source package instead of 'linux-image-3.2.0-4-amd64'
NOTICE: 'linux' packaging is maintained in the 'Svn' version control system at:
svn://svn.debian.org/svn/kernel/dists/trunk/linux/

[Code] ....

The failure to verify the signature has me concerned, but beyond that, what do I do about the different version number when compiling and installing the kernel modules?

View 1 Replies View Related

Debian Configuration :: How To Load Own Kernel-module (KO) In Jessie

Mar 14, 2016

I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type

Code: Select allsudo modprobe 8821au

I get a

Code: Select allmodprobe: FATAL: Module 8821au not found..

But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:

Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko

it seems to work:

Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.

But lsmod doesn't show me the module after that.

I also added

Code: Select all./kernel/drivers/edimax/8821au.ko

to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.

So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.

View 3 Replies View Related

Debian Configuration :: Building A Loadable Kernel Module?

Jul 30, 2010

I upgraded my kernel in my Debian Lenny to version 2.6.32-bpo.4-amd64 to fix a problem with a software and ALSA-related issues. The thing is that now, when I boot, eth1 is not enabled and I have to "load" (I guess) the driver each time. To do this, I go to the folder where all the files for the drivers are and I run:

modprobe lib80211
and then
insmod wl.ko

That I got from the readme file. That gets the wireless working perfectly again, but when I reboot the wireless is dead again and I have to run the commands above again. I imagine that what I should do is to build the driver again, for my new kernel. However, according to the readme file, before I need to install linux-headers-generic and build-essential. With build-essential, it says it's already the newest version, and with the linux-headers, I don't know which one should I install for my kernel! I thought it would be the linux-headers-2.6.32-bpo.4-xen-amd64, but when I tried that, this is what happened:

debian:/home/hernan/Programas/hybrid_wl# apt-get install linux-headers-2.6.32-bpo.4-xen-amd64
Reading package lists... Done
Building dependency tree

[code]....

So the warning says something about the MODULE_LICENSE being missing... how to build the driver again to make it load each time I boot?

View 3 Replies View Related

Debian Hardware :: NVidia Kernel Module Won't Build?

Apr 24, 2011

I can't get the nVidia kernel module built. Each time DKMS runs to install it (I'm trying to install it with the nvidia-kernel-legacy-173xx-dkms package on ), the build fails with a different error. Here is an exemple /var/lib/dkms/nvidia/173.14.27/build/make.log (I have a geForce FX 5200 on the computer I'm trying to install the nVidia driver):

DKMS make.log for nvidia-173.14.27 for kernel 2.6.32-5-686 (i686)
dimanche 24 avril 2011, 17:28:09 (UTC+0200)
make: entrant dans le rpertoire /var/lib/dkms/nvidia/173.14.27/build

[code]....

View 3 Replies View Related

Debian Programming :: Compiling Linux Kernel Module

Aug 27, 2014

I'm trying to compile a Linux kernel module called hello-2.c using the command "make -C /lib/modules/$(uname -r)/build M=${PWD} modules" (without the quotes) (which I found online), and the following is the (seemingly successful) output.:

Code: Select allmake: Entering directory `/usr/src/linux-headers-3.2.0-4-amd64'
  Building modules, stage 2.
  MODPOST 0 modules
make: Leaving directory `/usr/src/linux-headers-3.2.0-4-amd64'

However, I don't see a hello-2.ko (in the same folder or anywhere else for that matter). I'm Using Debian GNU/Linux 7.6.

Everything I am doing is within a folder/directory called "thefolder" (without the quotes) in the "/tmp" directory (without the quotes).

Why I can't see a hello-2.ko, and what to do to get it?

View 2 Replies View Related

Debian :: Blacklist Kernel Module (stop Autoloading)?

Aug 29, 2010

Running Debian lenny.I want Debian to stop from loading certain kernel module at startup. For now I tried adding "blacklist my_module" line in /etc/modprobe.d/blacklist file with no luck. Also I tried to add line above into some new file in /etc/modprobe.d directory - not working.How do I blacklist kernel module in Debian lenny ?

View 4 Replies View Related

Debian :: Change The Module And Create Custom Kernel

May 7, 2011

I'd like to change the existing kernel module (driver) file and compile a custom kernel.

Is this the correct way:

View 9 Replies View Related

Ubuntu Networking :: WiFi Link 1000 Series Stopped Working With 2.6.32-32 Kernel Upgrade

May 31, 2011

My Intel Corporation WiFi Link 1000 Series wireless card stopped working yesterday after I did an update via Update Manager.After the upgrade, wireless is disabled and the option to enable it in Network Manager is grayed out. I thought that it might be the new kernel, but changing back to the old kernel I still have the problem.

View 8 Replies View Related

Debian :: How To Install Iptables-persistent As Loadable Kernel Module

Nov 10, 2015

I'm working on my iptables rules on a debian 8 vps and I tried to install iptables-persistent but I was told "Unable to locate package"...

Where can I get this so that I may save my rules for reboot?

View 5 Replies View Related

Debian Multimedia :: Two Sound Cards Sharing Kernel Module

Dec 5, 2014

I have an nvidia card and a motherboard with an internal sound card.

The nvidia card hogs alsa, and it's really obnoxious because I don't use hdmi for audio (or video, for that matter, crt all day)

I would normally just blacklist the module that the card is using, but I hit a hiccup...

This is the readout for the gfx card from lspci -v

Code: Select all01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
   Subsystem: ASUSTeK Computer Inc. Device 84bb
   Flags: bus master, fast devsel, latency 0, IRQ 25
   Memory at fe080000 (32-bit, non-prefetchable) [size=16K]
   Capabilities: [60] Power Management version 3
   Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
   Capabilities: [78] Express Endpoint, MSI 00
   Kernel driver in use: snd_hda_intel

And this is the readout from the motherboards internal audio card

Code: Select all00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
   Subsystem: Gigabyte Technology Co., Ltd Device a132
   Flags: bus master, slow devsel, latency 32, IRQ 16
   Memory at fe500000 (64-bit, non-prefetchable) [size=16K]
   Capabilities: [50] Power Management version 2
   Kernel driver in use: snd_hda_intel

Since they have the same kernel module, all the internet advice is pretty much moot, because I can't figure out how to effectively shut off one without killing the other as well. Huge PITA.

View 1 Replies View Related

General :: Adding A New Kernel Module To Wireless Driver Module?

Apr 22, 2010

I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.

View 2 Replies View Related

Debian :: Lost Sound After Upgrade?

Nov 1, 2010

I'm running 32bit Lenny on an older Dell Dimension 2400 running the 2.6.26 Kernel. This box was mainly used to play movies for my son over the network (most are encoded by me using xvid and lame). One of my kids wanted to use the computer to watch videos on ...... I attempted to install the flashplugin-nonfree from the backports and it kept timing out on downloading the package, so I ran apt-get update and then apt-get upgrade. I rebooted and tried the flashplugin-nonfree again and finally got ..... videos to play but there was no sound. I assumed it was a permission issue, so I switched users and attempted to play some of the movies which I've played before and currently the video plays fine but the audio sounds very ugly. I attempted to play an mp3 using mpg123 from the command line and I get mostly static. You can hear some sound but it's all jumbled and there is a lot of static. I have a creative soundblaster card using the EMU10k1 driver. Everything was working fine before I started mucking with the flashplugin and I'm afraid something I "upgraded" may have caused my issue.

Any suggestions? Is there a way I can remove any sound related drivers etc and attempt to reinstall them? I attempted to run sudo alsaconf but afterwards, it acts like there is no sound card. a reboot resolves that issue as I didn't save any changes, but I'm not sure where to go from here. I've become spoiled by all of the newer distros which detect all of my hardware and everything is configured for me.

View 2 Replies View Related

Debian :: Lost Desktop After Sid Upgrade?

May 5, 2015

Desktop lost (Cinnamon 2.2.16 for me) after a recent dist-upgrade in Sid. I'm new to Sid, so is this normal?

Here's what happened:

Code: Select allsudo apt-get update
sudo apt-get dist-upgrade

Code: Select allCalculating upgrade... The following packages were automatically installed and are no longer required:
  x11-apps x11-session-utils xinit
Use 'apt-get autoremove' to remove them.
Done

[Code] ....

I also have run

Code: Select allsudo apt-get update
sudo apt-get -f install
sudo apt-get install task-cinnamon-desktop

but it says something to the effect that task-cinnamon-desktop has been moved out of incoming, and that it's unable to install since I have held broken packages.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved