Hardware :: How To Make Webcam Led Works
May 7, 2011i have a life tec webcam which automatically installed by ubuntu 10.10 and working except the led of the cam is always off how to make the webcam led work?
View 13 Repliesi have a life tec webcam which automatically installed by ubuntu 10.10 and working except the led of the cam is always off how to make the webcam led work?
View 13 RepliesI have Debian 8.3 version, and I do not know how to operate the webcam, Cheese blocks itself, and skype doesn't show image, just black screen.
View 11 Replies View RelatedFrom time to time I have seen messages asking if their new device works on Ubuntu. This is to advise that I recently purchased a "Smart Webcam" brand inexpensive webcam at a local U.S. building products chain. Strange place to find such a thing but it was very low priced so I thought "why not give it a try". As it turned out, it works with my 10.04 install. Shows up ok on Ekiga and in gstreamer-properties in terminal. The video image quality is not as good as some but is suitable for casual use.
The microphone is brought out via a "Y" off the USB cable and ends in a 1/8" audio plug that will plug into a sound input port. I have not tried the mic but it should work. There is almost no documentation provided. Lastly, I have no connection with either the manufacture or the store. Just thought someone might be considering one of these and wondering it would work in Ubuntu. It does for me.
I have the following webcam : Microsoft Corp. LifeCam VX-1000.
Code:
ben@vegas:~> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code].....
So 11.2 obviously supports that webcam somehow, since it works on my desktop. Looks to me like something simple should make it work on the laptop as well, but I have no idea what...
Did you test a webcam which is immediatly recognized by ubunty 9.10 and works well on skype?
View 9 Replies View Relatedjust installed ubuntu 10.04 a week back.It updated as well through the update manager.Then I installed latest version(beta) of skype from the .deb downloaded from their website.In the beginning my webcam was detected but the video used to flicker.So I searched the net for a solution.I tried launching skype using 'LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype' command but there was hardly any difference.Then I came across gstreamer properties.I tried the three options and there started the problem.Now my webcam is detected only on its first launch.Once i stop the test there appears a black screen.I uninstalled and reinstalled skype but in vain.I tested it using cheese and vlc as well.
View 9 Replies View RelatedI am running Maverick 10.10, kernel 2.6.35-22 (32 bit) on an HP DV2000 with Skype version 2.1.0.81The webcam is detected by lsusb as Bus 001 Device 002: ID 0c45:62c0 Microdia Sonix USB 2.0 CameraI have tried some of the normal fixes found on many other threads (and HERE), including running the following commands from the terminal:
Code:
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
Code:
[code]....
By using the preload command D_PRELOAD=/usr/lib/libv4l/v4l2convert.so skype I got my Labtec Webcam 6 to work in cheese and in skpe (although with a number of errors coming up in the terminal - see another post of mine) in ubuntu 10.04. I now updated to ubuntu 10.10 and now I do not get any errors but not any picture either. It just remains black regardless of whether I do the preload or not.
View 8 Replies View RelatedOn a PC with 4 users (Karmic), I have installed a webcam. Everything (cam and mic) works for the default user. Cam works in cheese. For the 3 other users, there only are a "testpicture" in cheese and no mic . ???
View 4 Replies View RelatedI have used my webcam with skype before in several ocations, but now im not able to do so.The wencam works with cheese, so i dont now where to got form here.On skype video options, it shows only one video/webcam device (CNF7017 (/dev/video0). when i with test on the options shows a gray screen, which is the same that im sending to my contacts when we video chat.
View 9 Replies View RelatedI'm running Ubuntu 10.10 on both my laptop and desktop. I've gotten a Gigaware Webcam with Mic (Radio Shack) 25-157 camera to work out of the box on my Del E-1505, no problems. Even interfaces with Skype correctly.
On my desktop, though, the camera light comes on, the camera is recognized through lsusb:
Code:
Bus 005 Device 003: ID 093a:2620 Pixart Imaging, Inc. and /dev/video0 exists, but I can't access it through VLC or Skype.
Choising an hardware in LINUX is not easy since one has to check before whether it is supported. A large hardware base is supported , but not everything.
Which webcam is sponsored by DEBIAN TESTING that works surely with just a plug and play (skype / camorama...) ?
After a required:
Code:
My logitech quickcam express works fine with gstreamer-properties and cheese, but i need to take webcam pics from console. It worked before the latest upgrade to squeeze, then:
My kernel is kernel 2.6.32-5-686
I don't know what to do... i'd like to run another kernel but i don't know which one..(and how to do that, i'm on remote)
I was impressed with the hardware detection in Fedora -- it picked up my wireless & webcam right out of the box. The odd thing is, that Fedora picked up the webcam right away, and it worked perfectly in Cheese (I was able to take both photos & video), but when I try to use it in Skype all I get is green "snow". The webcam is a Logitech QuickCam Communicate STX.
View 6 Replies View RelatedI'm using Ubuntu 9.10, and a usb webcam that is shown as 'Bus 001 Device 005: ID 0ac8:3450 Z-Star Microelectronics Corp.' by lsusb.
The problem is that on connecting the cam, it just works with the first program I start (skype, tokbox, messenger), and if I disconnect it or switch to another program, it stops to work and I have to restart my computer to make it work again.
Is there some good solution to reset the camera without rebooting to make it work again?
I have a vx-6000 and the video and pictures actually works good but there is no sound can you get sound to work and how?
View 2 Replies View RelatedMy webcam works at my end but two people have said they can't see me their end using skype. They webcam with other people so i know it is not their settings or anything. One has a mac and the other a windows machine. I really don't have anyone else to test this with as most people i know don't have webcams.
View 9 Replies View RelatedI'm using a basically vanilla Lubuntu 11.04 My Logitech E 3500 webcam works fine with Cheese. I have just installed Skype, but my voice isn't picked up on the test call, and no video either (the webcam light remains off). I've tried logging off and into Skype.
View 5 Replies View RelatedI'm running Kubuntu Karmic Koala 9.10. I just got a no-name USB webcam. It works fine under Windows. Under Linux the behavior is odd and a little frustrating. xsane does recognize it, but when I attempt to preview it or scan, I get the message "Failed to start scanner; invalid argument". Under skanlite, I can scan an image but if I attempt a preview, skanlite generates an internal error. The USB code is...
Unlike the other USB devices, no name shows up.
I'd like to use this device under Skype, but the Linux version of Skype doesn't provide any way to test whether the device works or not. Windows does provide such a test (via Welcome), and the webcam works correctly there.
How can I civilize this beast?
i have dell inspiron N5010 and i have installed ubuntu on it.i am using ubuntu for the first time and i am having a real hard time as my mic and my webcam which are built in my laptop.how can i make them work.
View 2 Replies View RelatedI have an Acer Aspire One D255. What package would I install to make myself able to record with my webcam?
View 2 Replies View RelatedI'm trying to make a webcam work on my Slitaz 2.0.
SysInfo :
Kernel 2.6.25
Busybox
I tested the webcam on my Mandriva 2010 and it works just fine with UVCvideo so i decided to compile UVCVideo for the slitaz Kernel.
I downloaded the files, then uncompressed them. I cheched my kernel source and gcc,make,.... utilities. Then I typed make and ....
There was an error with an ln command in v4l/Makefile in the following line:
Code:
links::
@echo creating symbolic links...
@find ../linux/drivers/media -name '*.[ch]' -type f -print0 | xargs -0n 255 ln -sf --target-directory=.
[Code]....
I want my webcam to be gray-scale when I use it in Skype and with other programs. I know I can make it gray-scale with Cheese, but that is only with that program. In windows it is a program called Manycam that allows the user to play it in the background and makes the webcam gray-scale over all. Is there an equivalence to Manycam for Ubuntu?
View 9 Replies View RelatedToday I wanted to make my webcam work in a flash chat. I added myself to the video group and added export LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so to my ~/.basrc file Then I loggued in again... and the problem is:
If I open a shell and start firefox from there (as a regular user), webcam will work ok. If I start Firefox from the top bar, it will NOT work. I checked preferences and it does not seem to do anything weird anybody has a clue? It seems weird to have that pretty top toolbar and not be able to use it.
I've browsed the forums on how to make the Logitech Quickcam Messenger webcam work. The problem I am running into is that the one and only website that seems to have the patch is[URL]...This website seems to be defunct. So does anyone have this patchfile or know where I can find it? Or some other option or work around?
View 3 Replies View RelatedUsing webcam component of XawTV package as supplied with Ubuntu 10.10. My implementation seems pretty basic, just needs to snap every 5 seconds and ftp to web site. It actually works just fine, but only for an hour or so. Then process continues to run, but image does not update. Kill & restart webcam and it works fine again, until it doesn't. Video stream in XawTV window is fine throughout, so I don't think there's a hardware problem.
View 10 Replies View RelatedI have a Dell laptop studio 1735 with a integrated webcam. The webcam seems to be recognised without issue:
1) dmesg | grep Webcam
Code:
Product: Laptop_Integrated_Webcam_2M
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63fa)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input13
And in the Hardware Info applet I found the following:
Code:
: USB 00.0: 0000 Unclassified device
[Created at usb.122]
Unique ID: +rmv.ZLiQYW8YBnE
[code]....
The manifacturer is:
manufacturer = "SONiX Technology Inc."
Do I have to install a special application? Or edit a configuration file in order to make it work?
I am trying to make a script which will analyze jpeg images taken from a webcam. i can get a image easily enough but i can't figure out a way to get the images average brightness as a number.
View 1 Replies View RelatedI'm trying to make a DVD that'll play on my stand alone DVD player. I import and edit the video using Kino and then export in an MPEG format. Fool that I am....I then waste hours and hours of time trying to create a DVD using Qdvdauthor. Then I click Create DVD and what does it do? It creates a bunch of useless files that when burned into a DVD produce a piece of junk.
Does anyone know exactly how to make a working video DVD on Ubuntu? unless you know exactly how to solve this problem don't send a bunch of links. I'm tired of reading the same regurgatated "how tos" that don't work.
I would like to create a code that is working on windows XP. I would like to have it like visual basic or very simple so that I can run some execlp, exec, or command="program.exe parameters" with also some internet support?GCC ? G++ ? but those require some DLL to be installed on any PC before running; it is for a friend to simplify his operations
View 5 Replies View Related