My logitech quickcam express works fine with gstreamer-properties and cheese, but i need to take webcam pics from console. It worked before the latest upgrade to squeeze, then:
My kernel is kernel 2.6.32-5-686
I don't know what to do... i'd like to run another kernel but i don't know which one..(and how to do that, i'm on remote)
Choising an hardware in LINUX is not easy since one has to check before whether it is supported. A large hardware base is supported , but not everything.
Which webcam is sponsored by DEBIAN TESTING that works surely with just a plug and play (skype / camorama...) ?
After a required:
Code:
I am trying to use streamer to set up a cron job to take a picture with my webcam once/minute. The image that it is capturing is too dark - does anyone know a way to lighten it? I am capturing the image as JPEG.
View 3 Replies View RelatedI have Debian 8.3 version, and I do not know how to operate the webcam, Cheese blocks itself, and skype doesn't show image, just black screen.
View 11 Replies View RelatedTried to install aMSN using Sid package... can't do it because no TK8.5. Installed TK8.5 and aMSN, now I get another strange message ...
Error in startup script:
OK ...
Let's check out 'Empathy IM Client' , no longer any support for MSN because ...?
Tried to setup Mercury which needs Java. Go to run Mercury, no java!
Had to set up Pidgin so that I could go on msn!
gpsbabel has always been a little awkward to get going, but it works well once it does. Out of the box on Lenny, gpsbabel just gave errors for me reading from a garmin unit, and the required solution was two steps: firstly, remove (and blacklist) the kernel module "garmin_gps". Secondly, add a udev rule like this:SYSFS{idVendor}=="091e", SYSFS{idProduct}=="0003", MODE="0660", group="plugdev" and save this as /etc/udev/rules.d/51-garmin.rules.
Now, I never understood why or how that worked, but it did (on Lenny), straight away, and was listed as gpsbabel's solution here (I notice it now says MODE="666").
Anyway, now I'm on Squeeze and have the same problems again. I've blacklisted garmin_gps again, and it doesn't appear in lsmod.
I've still got my udev rule, but now gpsbabel fails as a normal user with the error:
Are you running Lenny? If yes, try this:
Be sure that there is an active X.
Press Ctrl+Alt+F1 to switch to tty1.
Login with your normal username and password.
Enter the command: "xrandr -d :0.0 -q"
You should be rewarded with information about your current screen.
Are you running Squeeze? If yes, try the above procedure and please explain to me what this means: No protocol specified
Can't open display :0.0
I have a fresh install of 64 bit Squeeze and for a few boots the sound worked great using my motherboards onboard intel audio not the creative soundblaster pci card I also have.
But now sometimes I boot up and get no sound, other times I get sound. I cannot find out why.
If I type:
Typing:
Although I only have two cards so not sure what the first item is.
I have been using my system for couple of weeks, and normally update software when the icon is displayed on top bar (gnome). Last couple of days there were updates for X, and I am not sure whether that is the cause of my problem. Once bootup, I get the login screen. When enter the password the login screen keep coming back. there is no error about any password issue, or anything. It keeps prompt me to enter the password.
I could login back the following way.
1. ctrl + alt + F1 , and login with the same username/pwd as for X
2.change to root
3.pkill gdm3
4.exit from root to user privilege
5. startx
The system starts X correctly and no login screen is displayed. I could use the system as usual.
The only thing I did custom to my system was upgrading to the latest kernel (2.6.38) using the source. This was to get support for my hardware, but that was about a month ago. I do not see anything in /var/log (X, demesg etc).
I've just install debian squeeze version, or the testing one, but I am not really happy with it. Is not listening me all the time. If I install the debian stable I don't have internet connection. Is it possible to update the kernel somehow using the testing version?
View 12 Replies View RelatedI run into a problem when trying to update from lenny to squeeze. Seems that util-linux fails to install due to some error and that this causes xorg as well as udev to fail. If this is the case then it might be a bug in the post-installation script for util-linux..Am I on the right track or is it completely wrong?
View 5 Replies View RelatedI am running a lenny server. So I don't have physical access.How can I upgrade to Squeeze without everything breaking? Also, I want to use "apt-get", not "aptitude".
View 8 Replies View RelatedI just upgraded to Debian Squeeze (from Lenny) and there are several errors occuring.
The first one is that whenever I want to use mplayer it gives me the following output:
Maybe that has to do with faulty drivers, I'm not sure yet.
What's bugging me a little bit more is whenever I start a shell like konsole or xterm it displays the following:
It roughly translates to:
A third problem is when I try to use something like mplayer or java and then try the tab completion I get yet another error.
Which would be:
So I get "bash: _get_comp_words_by_ref: command not found", however it's not like that with all of my applications. Tab completion after the command "vlc" for example works just fine.
I have a Debian Lenny LAN Gateway machine running shorewall, squid and a source install of ossec in the opt dir. The machine is an Intel Atom based asus hummingbird with no gui. It works well and has been very stable so far. However, i am considering upgrading to Squeeze. Is it feasible to attempt to upgrade this machine, or am i realistically looking at a reinstall and reconfigure with Debian Squeeze over a long weeked?
View 2 Replies View RelatedI installed a Debian server a few time ago, with the Squeeze version.
Now I want to upgrade it to Jessie, but all related documentation only talk about the procedures to upgrade from Wheezy to Jessie.
What should I do? Upgrade first Squeeze to Wheezy and after that to Jessie, or I can upgrade from Squeeze to Jessie?
Now when new stable debian is squeeze I was wondering how do I apply updates to my lenny distro?I just want to apply all updates available for lenny, but DO NOT WANT to upgrade my lenny to squeeze.
View 1 Replies View RelatedI live in Swizterland and am using a Swiss mirror.I want to upgrade my Lenny installation to Squeeze
View 6 Replies View RelatedSince upgrading my laptop to Squeeze, terminals (tested Gnome terminal and xterm) show simply a "$" prompt; machine, path and username are missing. What's really annoying though is that tab completion doesn't work, it inserts a tab character instead. Fooling around showed me that typing in the command "bash" brings everything back to what I'm used to. So in my dire newbiness do I ask, how do I reenable bash as the default shell for these programs?
View 5 Replies View Relatedwhen I tried to upgrade my computer from Lenny to Squeeze and it downloaded everything but it's stuck at installing udev which it said it couldn't do on the 2.6.26 kernel. I then did update-grub and Squeeze's 2.6.32 kernel was seen (on grub). I have grub-legacy chainloading (if I'm not mistaken) but I don't have grub2 installed. When I try to boot through the 2.6.32 kernel so that I can complete the upgrade (that is to install udev and have everything working fine), instead of reaching the OS, it says something along the lines of "kernel panick not syncing vfs" and something about "root(hd1,0)".
View 10 Replies View RelatedI've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround
View 3 Replies View RelatedI'm currently using Debian Lenny 5.0.7 and I tryed to upgrade to Squeeze. I followed the instructions from Debian's Guide:
1. I changed my repositories to squeeze in sources.list
2. # aptitude update
3. # aptitude install apt aptitude dpkg
4. # aptitude safe-upgrade
After this last command, the computer kept working for about 7 hours, it consumed 2 gb RAM and 1 gb swap, and in the end aborted with the following message:
I searched around and I found out that this error is somehow related to C/C++ package compilation, but I found nothing specific related to Debian's upgrade.
When I had Lenny installed I made this computer be my alarm clock (with sanduhr) to wake me up for school in addition to my mom's TV (because I am a heavy sleeper) and now I cannot use this computer to do so. I'm not saying it's a bug. I'm just asking, how do I enable it again? I know that with Lenny to enable/disable beeping, I went to System=>Preferences=>Sound but now I don't see how to make beeping work again.
View 11 Replies View RelatedI am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
View 14 Replies View RelatedI have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
View 6 Replies View RelatedA week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
1) old a1300 laptop: P3 800, 256 MiB RAM, HDD, PC-CARD NIC. from lspci: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10) with debian (i386), previously lenny, now squeeze. running as server.
[Code]...
Smaller files seem to transfer faster, but I have no idea why. I've checked with ethtool that both NICs are running at 1000Mb/s, and both are connected to the same Gigabit switch. The HDD in the laptop had previously provided (nfs) transfer speeds of 12-13 MiB/s. The options in fstab on the client are what I've changed them to since, while trying to fix the problem. Can't remember exactly what they were, but rsize, wsize and nfsvers are some I put there trying to fix it.
I had considered buying a new, faster HDD for the laptop, but that is certainly out of the question until this is resolved. Edit: Is this the right place to ask about this? I did wonder if the 'General Questions' category was a better fit.
After upgrading to squeeze I have now X Server 1.7.7 installed and it won't start.
When I try to run startx script, monitor gets blank for few seconds and then I get back to command prompt and no errors is displayed.
When I try the same as root, system locks up with blank screen and no functioning keyboard.
Initially I had kernel 2.6.28 which worked fine with earlier Lenny's X Server and Matrox P650 AGP video card. After upgrade I found, that Matrox P650 is not longer supported in new xorg and I swapped it to Matrox G550 AGP card.
Tried mga driver's many options, upgraded to kernel 2.6.37.2, tried with Matrox G200 PCI and Savage 4 Pro AGP card but without a success.
With kernel AGP support turned on I got both with Matrox G550 and Savage card an MTRR error: "error setting MTRR, Invalid argument (22)". Without AGP support in kernel, Matrox G550 gets initialised as PCI card and no errors and X still not working. Same with Matrox G200 PCI card.
With vesa driver the behavior is also the same and output at the end of Xorg.log file is almost the same.
So I understand, that this is some X server problem?
Nothing special in xorg.conf file and tried without it also.
End of the Xorg.0.log file:
>>
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
[Code].....
Finally ran the upgrade from lenny to squeeze and ran into a few issues. I have to admit this is the first dist-upgrade I've ever had go this badly (kernel issues, xorg issues, mysql transition problems, mythtv... Yikes!).Anyway, the first problem I'm trying to fix is getting dpkg to like the new squeeze kernel. Here's the errors
Code:
Errors were encountered while processing:
linux-image-2.6.32-5-686
[code]....
Yesterday, I ran a security update that upgraded my Squeeze kernel from 2.6.32-48squeeze8 to 2.6.32-48squeeze9.
Ever since then, my suspend to ram (STR) function is broken.
The machine will suspend normally, but will not resume. When I try to awaken the machine, I can hear the fan in the tower start up (the subject machine is a desktop computer, please see below for specifics), but the machine seems to be otherwise dead (e.g. the monitor stays blank, pressing the "caps lock" key on my keyboard does not activate said keyboard's "caps lock" led, Ctrl-Alt-F[x] has no effect, etc). My only recourse at that point is a hardware reset (ouch!).
I tried running Code: Select allpm-suspend from a terminal, with no joy. Same result running Code: Select allecho -n "mem" > /sys/power/state from a terminal.
I checked the /var/log/pm-suspend.log file and noticed that each Code: Select all...performing suspend line used to (before said kernel upgrade) be directly followed by a Code: Select all...Awake. line, but, now, all said Code: Select all...performing suspend lines are followed by an Code: Select allInitial commandline parameters... line.
Before this, STR has worked well ever since I first loaded Squeeze on this machine back in 2012.
Code: Select allSqueeze 6.0.10; 2.6.32-5-amd64
Intel i7-980 Gulftown CPU
Asus P6X58D Premium Motherboard
EVGA GeForce GTS-450 Graphics Card
G.SKILL Ripjaw DDR3-1600, PC3-12800, 1.5v RAM (6x4GB sticks, 24GB total)
Crucial RealSSD C300 128GB SSD
Western Digital Caviar Black 1TB HDD
Corsair HX850 PSU
[CODE]
I've found myself using Ubuntu more recently because of newer packaged apps, so I finally decided I'd upgrade my laptop and desktop”each amd64—to Squeeze, instead of starting a bunch of apt-pinninng. I started with the laptop, which despite my preparations is now broken.
View 14 Replies View Related