I have Intel Atom based development board which has eMMC chip. I can successfully boot Fedora 11 on this board from SATA drive. However Fedora doesn't see this eMMC chip as external storage. The "fdisk -lu" command doesn't show presence of any mmc device.
View 4 Repliesi want to install virtualbox on fedora. I have downloaded rpm from virtualbox website the latest one for fedora 11. When i try to install in my system the following dependencies are occur. I dont know internet connection.
libxml2.so.2(LIBXML2_2.4.30)
libxml2.so.2(LIBXML2_2.6.0)
libxml2.so.2(LIBXML2_2.6.17)
libxml2.so.2(LIBXML2_2.6.8)
what package I need to be install. I searched in the google but i cant get it. Help me also for vlc player. Where can i get the entire package including codecs. Vlc has lot of dependencies.
I am using f11 and cannot run any VCD.
I tried to run it via totem, which says "Could not open location; you might not have permission to open the file."
but I have the read permission for sure. while on mplayer, it says "seek failed" and exits.
any solution?
My Fedora11 hangs on boot. I have no idea where or why it is hanging so I want to disable graphical boot. I booted the installation media, the root file system mounted on /mnt, seted /mnt as my root with the chroot command and edited /etc/inittab, then unmounted and rebooted but it didn't help me. Is it possible to run gconf-editor under live cd and disable splash? How can I boot Fedora in single mode? For example use the following steps I'll be able to boot RHEL into single-user mode:
At the GRUB splash screen at boot time, press any key to enter the GRUB interactive menu.
Select Red Hat Enterprise Linux with the version of the kernel that you wish to boot and type a to append the line.
Go to the end of the line and type single as a separate word (press the Spacebar and then type single ). Press Enter to exit edit mode.
i am using NCTUns simulator and having problem while receiving message from an OBU. sending a message works properly but recving creates problem and fails. i am using exactly the same function as used by the developers in the demos but still no luck. i copy the code attch the screen shots to have a look
sendto() and recvfrom() are used for message transfer. they both return >-1 if they are executed successfully. please have a look in the screenshots. agentClientReportStatus is the built in packet format which im using here whose fields i filled manually are in the code below.
agentClientReportStatus *message,*mssg;
int remainTime,n,n2,n3,i,sendingaddress,value;
sockaddr_in cli_addr;
timeval now;
[Code].....
I just installed OpenSUSE 11.1 along side my Ubuntu 9.04 and Fedora11 installs, how ever the OpenSUSE grub installer did not auto detect my other distros and add them to the grub list as Ubuntu does. How can I about adding them manually? My Ubuntu resides on the sdb6 partition and my Fedora resides on sdb8
View 5 Replies View RelatedI have just upgraded my system from fedora9 to fedora11.IN 9 i didnt hav any problem in accessing internet from firefox.but here in fedora11 firefox is not working .firefox cannot establish a connection to the server.i have tried to fix the problem by disabling firewall and proxy.but still im having the same problem..
View 8 Replies View Relatedhow to compile assembly code in linux? I am using AMD processor code instructions...is that amd registers inbuilt? with what file extension i should give while writing assembly code program?
View 14 Replies View RelatedThis is my Fedora 11 installation review:The pc (cd2, 7600gs, 2gb ram) boots ok from any of the many Fedora live cd/dvd.After booting it goes to a nice window with a (3 colored flashing forward motion) tollbar at the bottom, where the words Generic 11 are written at the bottom right.
So far so good: no questions to answer, the Dvd is speaning out loud. 2 min later the above mentioned screen changes into a b&w verbose mode sreen.After a dozen of written lines, where the last one says "bridge firewalling ..." the drive noise gradually extinguishes, its red light turns off, the b&w verbose screen dies and even the Pc looks like dead too. Could be waiting here until next day, nothing more happens. So, I do various alt/ctrl/del, until the Cd/dvd (liteon) ejects and the pc reboots.
This is really CRAZZY. Lately I'v been trying many different distribution installations and this never happened. It's equal with any of the many fedora live cd/dvd's, window manager's, 32/64 bit. I did try last week, 2weeks before, today.... and did also try fedora Omega but is the same result at the end.I wonder if this is just me, missing some Fedora fundamental specific thing, or if ithis has happened to some of you.I browsed and searched but this looks like an uncommon issue, as I didn't find nothing similar.
i have fedora11 installed on my computer as well as windows xp,but now i want to delete all my drives from windows and add those drive to fedora11 because i do not need windows any-more.how can i do that?also i want to increase size of root partition, can i do that?
View 2 Replies View RelatedI have one Windows-XP on Machin 1 and one Linux on Machine 2. I want make Linux machine as CVS server and Windows Xp as CVS client. How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
View 1 Replies View RelatedI am trying to ftp a whole directory tree using vsftpd as ftp server in fedora11
Code:
I am getting error while transfering a directory tree ...
Can any one give me suggestion which rpm to install for dream viewer installation on fedora11
View 2 Replies View RelatedI have installed Fedora 11 and Fedora 8 on two differnt machines and I am doing an rdesktop to connect to a Windows 2003 server. The connectiviy is pretty fast when I try and connect the same from fedora 8 machine but it very slow when I try and connect it from fedora 11 system. I have tried using TS client but even then it is pretty slow. I have also tried using an Nvidia 8400 graphic card and Nvidia 9600 on Fedora11 OS.
I have also tried using Fedora12 OS as well. Is there any thing specific I can check on Fedora11? Or do I need to do some thing on my windows 2003 machine?
i have fedora11 installed on my computer as well as windows xp,but now i want to delete all my drives from windows and add those drive to fedora11 because i do not need windows any-more.how can i do that?also i want to increase size of root partition, can i do that?
View 1 Replies View RelatedI want to compile the the source code given in a well known unix programming book(stevens) .I downloaded the codes but unable to build it ,giving me an errorerror: stropts.h: No such file or directoryI don't know what to do....I am using fedora 11 latest gcc in the system.
I also try to include the search path which include a file -I./usr/include/xulrunner-sdk-1.9.1/system_wrappers but itI open the header file and the definition is there #include_next<strops.h>so ultimately there is not the original file
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies View RelatedI have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors. I have two nvidia Fx3500 card in the machine. I have tried the 173, 185 and 190 driver - same thing.
View 2 Replies View RelatedI have a backup HDD with a different distro for my laptop and i can boot into it via external usb or if swapped into the laptop. This HDD/install in question is debian testing and was working fine, the issue arose suddenly. I was first suspecting a failure of hardware somewhere on the motherboard, but the hdd i was using with an external usb adapter also works when installed into the machine. also, the HDD is recognized once i have booted using the external HDD and distro, but it is not recognized by the bios. so i dunno, my first guess is something became corrupt within the testing install, but i guess its also possible that there is some wrong with the HDD but thats not immediately apparent as all the data is still accessible.
Should also note that the HDD with testing on it is also recognized when connected via the external usb adapter, while booted from alternative distro/HDD.
Also. just tried this, but i can get the testing HDD/disto to boot if connected externally. it was going pretty quick, but there i did catch a line about a corrupt filesystem. any commands to run to see what might be going on?? log files to look at?
I just installed Ubuntu 11.04. The drive was formatted when I installed so it's 100% Ubuntu. The only major problem I have encountered is that Ubuntu will not recognize my SD cards. I really need to access these cards, all my film footage is on there. I think the internal SD card reader (If such a thing exists) would have been deleted during the installation process. I am a greenthumb to Ubuntu and have never used it before so I am rather stuck...
View 7 Replies View RelatedIs it possible to do this? I'm just thinking maybe I can run KDE without using the GPU so that I can use the GPU for computation (CUDA). The system I'm thinking of using is a laptop with Nvidia GTX260M video card. I've seen people talk about frame buffer, but I don't quite understand it because it seems that some people are talking about using frame buffer even when they have a video card on their system.
View 9 Replies View RelatedIs there a way to use my nvidia chip in my eee pc 1215n?
It has an integrated graphic card and a discrete card (nvidia). I don't care about battery but I'd just want to use nvidia chip.
I put Ubuntu 9.04 Linux on my computer a while ago and I found that my integrated graphics chip is going unrecognized. I've tried many ways to get it to "turn on" and be recognized, but nothing works
View 9 Replies View Related11.3 installation appears to be completely unusable for mission critical workit's running/freezing on a Toshiba a300 laptop, intel 965gm gfx, using the drivers that where installed by 11.3whenever the unstoppable screen/monitor saver kicks in, it freezes the machine irrecoverably.same as: 11.3 kde constant lock upsthe unstoppable screen/monitor saver has been a pain in the neck in 11.2 too, is it possible to COMPLETELY REMOVE any code that will make the gfx go on standby? what a pain when you are watching a movie! disabling everything obvious never worked! wtf?
View 5 Replies View RelatedI have no experience with embedded systems hardware and am looking to build a micro-budget underwater robot for exploring the bottom of a lake on the family homestead. I don't have much money to spend on this, but I want to run Debian Linux (I have lots of Linux Admin experience and am right at home with a terminal) or something like that on a small chip which needs to be able to:
Connect to the control computer via ethernet. Get digital or analog data from a GPS module, pressure sensor, etc. Control a few thrusters. Do various other hardware IO functions. Possibly control a robotic arm (this is a long shot, I know). And costs less than about 100 dollars. I have no experience with embedded systems hardware so I really don't know what to buy or where to start, aside from the fact that I heard that this would be a good place for something ARM-related. I am a software developer with time to burn as far as writing the programs to support this goes.
I programming a software using the FTDI chip Ft232 ,and using the D2XX driver(version 1.0.4).I already written some software in the MS Windows and the function FT_GetBitMode works , although in the Linux( Fedora 64 bits and Ubuntu 32 bits) this function returning FT_IO_ERROR (4). I already try differents different USB ports, run as root user or change the USB dev permissions.
View 1 Replies View RelatedDoes CentOS 5.4 support Intel Q45 graphics chip? If it does not support, How do I install the driver manually?
View 1 Replies View RelatedI was installing DYMOUM from [url]. "make" command is issuing this error:
Code:
Prior to this, ns-2.34 was working fine. Patches are applied very well.
I am in under fedora 9 and:
Code:
I installed (for PC i686 Pentium4 1. the PCI-card InnoVISION EIO DM-8401, connect a two hard drives, configured Raid1. established a basic system "Debian 5.0.3", and reboot system. system gave me a message:
Loading, please wait
[ 3.004004] 8139cp 0000:02:07.0: This (id 10 es: 8139 rev 10) is not an 8139C + compatible chip
[ 3.004004] 8139cp 0000:02:07.0: Try the "8139 too" driver instead
I have the disk driver:
- Components : For Mandrake 9.0 / Kernels Tested : 2.4.19-16mdk
- Components : For Redhat Linux 7.3 / Kernels Tested : 2.4.18-3
When trying to install fedora, I frequently run into the problem where it locks up on boot.
The line that I am able to read right before it locks up is: "No TPM chip found, activating TPM-bypass!"
I was wondering if anyone has any similar problems or how I could fix this.