Networking :: Connectivity Using Rdesktop From Fedora11 To Windows 2003 Is Slow?

Apr 22, 2010

I have installed Fedora 11 and Fedora 8 on two differnt machines and I am doing an rdesktop to connect to a Windows 2003 server. The connectiviy is pretty fast when I try and connect the same from fedora 8 machine but it very slow when I try and connect it from fedora 11 system. I have tried using TS client but even then it is pretty slow. I have also tried using an Nvidia 8400 graphic card and Nvidia 9600 on Fedora11 OS.

I have also tried using Fedora12 OS as well. Is there any thing specific I can check on Fedora11? Or do I need to do some thing on my windows 2003 machine?

View 1 Replies


ADVERTISEMENT

Networking :: Configure Rdesktop To Connect To A Windows (XP/2003) Computer?

Mar 22, 2009

how to configure rdesktop to connect to a Windows (XP/2003) computer, but going through a Terminal Services Gateway or connecting to a Terminal Services Server through TLS/SSL? The command line options or any on-line documentation I was able to find, omits this entirely. Using the Windows Remote Desktop Client (RDP6) you can configure Terminal Services Gateway connections from the Advanced Tab. I suspect that rdesktop, gnome-rdp, tsclient et el can't do this yet as they support up to RDP5. Currently I am using a WinXP VM to accomplish this, but would like to do this natively on my Linux box.

View 3 Replies View Related

Networking :: Connectivity Between Window 2003 Server And Santos 5.4 Server

Apr 29, 2011

we have deployed linux Santos 5.4 server and window 2003 server. we are able to ping window server from linux but not linux server from window. all are in same network.

View 1 Replies View Related

Networking :: Setup CVS Server In Fedora11 And CVS Client In Windows Xp?

Sep 12, 2009

I have one Windows-XP on Machin 1 and one Linux on Machine 2. I want make Linux machine as CVS server and Windows Xp as CVS client. How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?

View 1 Replies View Related

Ubuntu Networking :: Initial Wireless Connectivity Slow?

Jan 9, 2010

I'm running Lucid Alpha 1. Installed it about two weeks ago. Until a few days ago, the wireless networking was the best I've witnessed on any o.s. However, after last Wednesday's updates, connectivity now lags about 10-30 seconds whenever I open any web-page or access the repositories via aptitude. Granted after it gets going, it's fine. I noticed this same behavior in 9.10. I tested my XP connection and found no problems. .

View 3 Replies View Related

Networking :: Any Tool To Test Website With Slow Connectivity?

Mar 8, 2010

Any tool where I can test a web site with slow connectivity? E.g.:
A web server running at Location A
and from Location B want to test the web site hosted at location A with various speeds
How is the loading of the web site from location B at 256kbps, 512mbps etc..

View 6 Replies View Related

Networking :: Can Not Ping Windows Servers 2003 ?

Apr 13, 2010

windows servers 2003 can ping linux system,while linux system can not do that? why?

View 4 Replies View Related

Ubuntu Networking :: Connect To A Windows 2003 Server?

Jun 25, 2010

I'm runnning Ubuntu 10.04 Desktop, and i need to connect to a Windows 2003 server, i've clicked on places at the top of the screen selected connect to server and put in my detains in all the vairing options and i still cant get on.

if it could be explained that information i need and where i can get it from in XP, i also need to log in then i access it from xp.

View 4 Replies View Related

Networking :: Connect System Pc To Windows Server 2003?

Sep 29, 2010

I am a primary school teacher at a school with hardly any money running 50 pcs on windows server 2003. We recieved 2 donated pcs without windows, so thought of installing a free copy of linux on them and then connect them to the server. Which linux version does this best and how would i do this?

View 6 Replies View Related

Networking :: Run Windows Server 2003 With KVM On Slackware 13.1, Two Dedicated IP

Feb 4, 2011

I have a server running slackware 13.1, and it is running windows server 2003 with QEMU-KVM. I followed [URL , now two system can connect each other.

The problem is: I bought two dedicated IPs, and I wanna know how to setup these two system to be Internet Servers.(Nginx in slackware, IIS in 2003) I found some subjects but I can't find what I want.

View 2 Replies View Related

Ubuntu Networking :: Can't Login Into Windows 2008 Using Rdesktop?

Nov 11, 2010

I have problem with login into Windows 2008 server usning rdesktop 1.6. While I'm connect Windows 2008 host, prompts username and password i get an error: "Wrong username or password" but i'm sure that username and pass are correct (I can connect this server using windows Remote Desktop). My OS is Ubuntu 10.04 64-bit.

View 1 Replies View Related

Ubuntu Networking :: AR5001 Chipset - Wireless Networking Randomly Loses Connectivity And Can Not Regain Connectivity

Jun 25, 2011

Wife's laptop has AR5001 Wireless Adapter laptop model is Toshiba Satellite A215

Problem : Wireless networking randomly loses connectivity and can not regain connectivity, the only apparent solution is a full power down , this is not even certain to work. The card works under Windows, she hates Windows. (I love her for this) I know it's not faulty hardware , because it will work for days on end under Windows without problems.

Things I've tried : madwifi drivers (any and all versions available) : These increase stability of the signal and seem to delay the inevitable however it still happens. When using these drivers the only option is to unload them modprobe -r then reboot then remove them again and re add them. It makes no sense why this works, and if I don't remove them prior to rebooting it will not work.

ATH5K drivers : These are pretty much junk, results are unpredictable at best, sometimes it will work perfectly for a few hours, sometimes it will not work at all. Nothing is repeatable, I can't seem to force whatever condition is causing this. rfkill does not show the wifi being blocked (hard or soft), unblocking it anyway does nothing, only way to make this work and it's iffy is to fully power down wait 5-10 minutes turn it back on and it MAY decide to work.

Firmware update : Updated the Toshiba BIOS to the latest version of the firmware 2.0 no joy here either. Same issue both sets of drivers.

Tried different distros and kernels : I've tried Mint 9, 10 ,11 ; Ubuntu 10.10, 10.04 , 9.10 and 11.04 (which is currently installed) , Fedora and OpenSUSE. All are giving the same problems. I have also tried a slew of different kernels no joy from any of them (I'm not at the computer with the issue now I will post exactly what kernel versions I've used when I have access to the machine).

Another useful bit of information, the hard switch to disable/enable wifi WILL disable it but turning it back on does absolutely nothing. The hotkey does nothing at all. The bios does not have an option to disable or enable the wireless card.

I will also post the typical lsmod , lspci , iwconfig all that good stuff when I get back to the computer in question. I'm probably just going to buy a PC card for it and give up on that one, but this is driving me insane and I would really like to see it resolved even if I do replace the hardware.

View 3 Replies View Related

Ubuntu Networking :: Rdesktop Map 9.10 Local Disk To Windows 2008 Server?

Mar 1, 2010

Using the following command, I can access a windows 2008 server: rdesktop -u myusername -d mydomain -p - -fP -r sound:local -r disk:myhome=/home/myhome serveraddress

connection works fine, and to start with I can see my local disk "\tsclientmyhome" and navigate around + open files. If I try to delete a file or rename a folder, I get an Error 0x8007048F:The device is not connected.

After this, I can no longer access the local disk. It says: "\tsclientmyhome is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Attempt to access invalid address." As I understand it, I should be contacting myself about permissions... Can anyone tell me what I need to do on my local ubuntu machine to fix this?

View 6 Replies View Related

Networking :: Rsync-like Use Of Rdesktop For Continual Load Of Data Files Off Windows?

Jul 19, 2011

Windows computer continually generates images (AutoGrabnnn). All downstream analysis on linux computer. I need analog of rsync bringing files over as they arise. rdesktop seems to be the approach. Is this already described somewhere to bypass much trial-and-error?

View 2 Replies View Related

Networking :: Configure Squid Users To Authenticate Against Windows 2003 Active Directory?

Feb 5, 2010

I have running on RHL enterprise 4. I want to configure squid users to authenticate against windows 2003 active directory. How do I go about from scratch

View 1 Replies View Related

Networking :: QEMU: Tap Host: Windows 2003 Server - Guest: Ubuntu 9.04 - No Ip Address And Can't Access Public

Oct 28, 2010

host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0

from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:

NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0

Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.

View 1 Replies View Related

Ubuntu :: Switching From Windows Server 2003 To 11.04

Jun 1, 2011

I am switching from Windows Server 2003 to Ubuntu 11.04.

These are two different machines, the Windows Server has 2 2TB Hard drives in it, that are setup as a RAID 1. The data on the drives is irreplaceable. I've scoured the internet for about two weeks, trying to find the best solution. It seems like everyone else had a slightly different setup, or the was no solution.

The Ubuntu Server has a 40GB SSD in it. I just installed a 2TB Hard drive (same make and model of the two in the Windows Server) and made the filesystem for it ext3.

First thing I did was just throw the 2 2TB Hard Drives in the new server, and tried to set them up as a software RAID. After it prompt me to erase the drives, I strayed away from that idea.

My end goal is having Ubuntu machine completely replace the Windows machine, so I'll need to setup Samba (which I'm sure I can figure that part out).

How can I get all the data off the 2TB Hard Drives that are using NTFS onto a RAID in the Ubuntu machine with an ext3 filesystem?

View 3 Replies View Related

General :: Can't Connect To Windows Server 2003 R2

Feb 28, 2011

9.10 Ubuntu (Karmic) I could never connect from home using rdesktop, grdp, krdc, etc to the Windows Server 2003 R2 at the office: "Connection reset by peer" or the client simply remains "connecting to...", depending on the client used. Some days I work from home as if I'm sitting in front of my PC at the office.

So I used to boot in Win XP to run mstsc. But the XP partition doesn't boot anymore, no way to fix it, so I need to try the Ubuntu rdp clients.

I even installed a Win XP in a VM (VirtualBox), but now mstsc doesn't connect, it ends due to timeout (as if the Windos Server "knows" I'm not a windows family client)

View 4 Replies View Related

General :: Get The Rid Out Of Windows 2003 Print Servers?

Jan 16, 2010

we want to get the rid out of windows 2003 print servers. we become sick of restart printer spooler services everyday when printing hang,halth,jam on printer. as admin we have to go to server and restartint services.ow let us continue,1)if using rhel installation time, what customer packages,binaries i should install it.

2) is cup is the print server name in linux world?3ing all windows xp,2000,2003,vista,win7 client4) where our all printers having ip based, 99% they r network ip based printers5) currently we open print share area on windows and all os(windows related) drivers r inside v right click and connect printers6) in linux will it stored drivers for windows for client?7) for ip base hp printers, do i need to download drivers from hp website or it will recongize detect over network all ip printers8) any chance of hanging printing similar to windows machines encounter then we have to go to restart "print spooler" services. as no alternate provide from microsoftkeeping above scenario what step should i follow and start practicing.

View 6 Replies View Related

Slackware :: 13.1 - Run Kvm To Host Windows Server 2003

Jan 26, 2011

I wanna do that like this subject. And I don't have any experiences about KVM. Are there any idea about this.

View 5 Replies View Related

Software :: Rdesktop 1.6 And Windows Server 2008?

Aug 1, 2010

I can get a connection to Windows server 2008 using rdesktop 1.6, but after a few seconds the connection is dropped and I get a message of and internal licensing error. I think rdesktop 1.6 uses rdp 5.x, and WIndows server 2008 uses rdp 6, but there must be some way to get a linux terminal server client to connect to Windows Server 2008.

View 2 Replies View Related

Fedora Installation :: Dual Boot 8 And Windows 2003?

Sep 10, 2009

I am attending college and I am starting my first Linux class tomorrow. I am going to be learning Fedora 8 (why they don't upgrade, is beyond me) anyways, I also have a third Server 2003 class. We have our own hard drives that we put in the school computers. (80gb) But here is the problem, I know normally your suppose to install Windows first and then Fedora second and you do not have a dual boot problem.

However my Server 2003 class was suppose to be on Monday (which was labor day) so I didn't have school. I am going to be installing Fedora tomorrow first thing, then on this next Monday I will be installing Server 2003 on the same hard drive, but Windows will be going on second. So my question is, how would I fix the bootloader so I can still dual boot Fedora and Windows without having to reinstall Fedora again?

View 5 Replies View Related

Red Hat / Fedora :: Rsync Via Ssh To Windows Sbs 2003 Protocol Mismatch?

Feb 17, 2011

I am trying to backup my CentOS5.5 webserver to our local windows sbs 2003 server in the office. I have set up ssh and cwrsync on the windows server and have confirmed that the linux server can reach the windows server via the command: ssh RemoteUser{AT} It asks for a password and connects fine. However when I run this command to start the backup: rsync -avz -e ssh home/account/public_html/some/small/directory/ remote_user{AT}/cygdrive/c/backup/destination/directory/

I get this error after entering the password: protocol version mismatch -- is your shell clean? PS I had to use {AT} instead of the proper character as the forum thought I was posting a URL

View 9 Replies View Related

Networking :: Data Transfer In V2V Communication (Fedora11)

Feb 27, 2010

i am using NCTUns simulator and having problem while receiving message from an OBU. sending a message works properly but recving creates problem and fails. i am using exactly the same function as used by the developers in the demos but still no luck. i copy the code attch the screen shots to have a look

sendto() and recvfrom() are used for message transfer. they both return >-1 if they are executed successfully. please have a look in the screenshots. agentClientReportStatus is the built in packet format which im using here whose fields i filled manually are in the code below.

agentClientReportStatus *message,*mssg;
int remainTime,n,n2,n3,i,sendingaddress,value;
sockaddr_in cli_addr;
timeval now;

[Code].....

View 3 Replies View Related

Ubuntu :: Transfer A Tiny CA Cert To A Windows Server 2003?

Apr 14, 2010

At work we are trying to avoid paying for a cert for our outlook owa. I thought of Tiny CA, but can't find a windows variant, it appears to depend on things that would not allow that.

Does anyone know if it is possible to create a Tiny CA Cert and install it on a Windows Server 2003? If not does anyone know of a good free Cert creation utility for Winedoze.

I have a feeling this is going to be another feather in the basket to convince my boss to go Ubunutu.

View 1 Replies View Related

General :: Fedora 13 Mounting Share On Windows Server 2003?

Sep 1, 2010

I'm trying to mount a Windows Server 2003 share in Fedora 13. With Fedora 8 and with RHEL 5.5 this works properly, but not with Fedora 13.

The mount point I'm using is /usr/eg

The symptoms are: Nautilus (the file browser) does not display the mount in the places or tree as a mounted drive. Using the file broser I can browse under file system down to the files on the server Programs cannot find the files under /usr/eg ie the files on the server.

Here is my fstab entry:

//192.168.1.40/eg /usr/eg cifs auto,user=<user>,password=<password>,rw,uid=500,gid=500,file_mode=0774._netdev 0 0

View 1 Replies View Related

General :: Sharing Folder With Windows 2003 Server Using Cifs?

Jul 12, 2010

I want to share linux folder with Windows server 2003 using cifs;I have install samba on linux system;

View 1 Replies View Related

Server :: Samba Backup Domain Controller - Windows 2003?

Nov 1, 2009

is possible configure a samba server to a Backup Domain Controller in a windows 2003 Domain ? I have a Primary Domain controller Windows server 2003 , can integrate my network with a linux samba Backup Domain Controller server ?

View 1 Replies View Related

General :: Remote Desktop (linux Rdesktop) To Windows 7 Timing Out?

Apr 8, 2011

I have a remote desktop session to a Windows 7 Workstation that keeps timingut/disconnecting after a minute or two of idiling. Also, sometimes it disconnects while I am in the middle of using it.I have tried turing off all NIC power saving options, the sound option for remote desktop, and all the go to sleep power saving options. I don't have any issues with remote desktop connecting to various Windows Server 2008 R2 Machines and VMs.

View 1 Replies View Related

Ubuntu :: Rdesktop To Windows Vista Full Screen Does Not Work?

Mar 17, 2011

Noticed few discussions on ubuntuforums on the problem "ctrl alt enter key combination" not working in toggling full screen rdesktop connection on Window session. Dealing with the same problem. Tried noticed solutions and just not succeeded.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved