General :: Install Virtualbox On Fedora11?
Mar 27, 2010
i want to install virtualbox on fedora. I have downloaded rpm from virtualbox website the latest one for fedora 11. When i try to install in my system the following dependencies are occur. I dont know internet connection.
libxml2.so.2(LIBXML2_2.4.30)
libxml2.so.2(LIBXML2_2.6.0)
libxml2.so.2(LIBXML2_2.6.17)
libxml2.so.2(LIBXML2_2.6.8)
what package I need to be install. I searched in the google but i cant get it. Help me also for vlc player. Where can i get the entire package including codecs. Vlc has lot of dependencies.
View 2 Replies
ADVERTISEMENT
Jul 31, 2009
This is my Fedora 11 installation review:The pc (cd2, 7600gs, 2gb ram) boots ok from any of the many Fedora live cd/dvd.After booting it goes to a nice window with a (3 colored flashing forward motion) tollbar at the bottom, where the words Generic 11 are written at the bottom right.
So far so good: no questions to answer, the Dvd is speaning out loud. 2 min later the above mentioned screen changes into a b&w verbose mode sreen.After a dozen of written lines, where the last one says "bridge firewalling ..." the drive noise gradually extinguishes, its red light turns off, the b&w verbose screen dies and even the Pc looks like dead too. Could be waiting here until next day, nothing more happens. So, I do various alt/ctrl/del, until the Cd/dvd (liteon) ejects and the pc reboots.
This is really CRAZZY. Lately I'v been trying many different distribution installations and this never happened. It's equal with any of the many fedora live cd/dvd's, window manager's, 32/64 bit. I did try last week, 2weeks before, today.... and did also try fedora Omega but is the same result at the end.I wonder if this is just me, missing some Fedora fundamental specific thing, or if ithis has happened to some of you.I browsed and searched but this looks like an uncommon issue, as I didn't find nothing similar.
View 5 Replies
View Related
Mar 14, 2011
Can any one give me suggestion which rpm to install for dream viewer installation on fedora11
View 2 Replies
View Related
Nov 25, 2009
I am using f11 and cannot run any VCD.
I tried to run it via totem, which says "Could not open location; you might not have permission to open the file."
but I have the read permission for sure. while on mplayer, it says "seek failed" and exits.
any solution?
View 1 Replies
View Related
Aug 24, 2009
I just installed OpenSUSE 11.1 along side my Ubuntu 9.04 and Fedora11 installs, how ever the OpenSUSE grub installer did not auto detect my other distros and add them to the grub list as Ubuntu does. How can I about adding them manually? My Ubuntu resides on the sdb6 partition and my Fedora resides on sdb8
View 5 Replies
View Related
Sep 6, 2009
I have just upgraded my system from fedora9 to fedora11.IN 9 i didnt hav any problem in accessing internet from firefox.but here in fedora11 firefox is not working .firefox cannot establish a connection to the server.i have tried to fix the problem by disabling firewall and proxy.but still im having the same problem..
View 8 Replies
View Related
Feb 11, 2010
I am trying to ftp a whole directory tree using vsftpd as ftp server in fedora11
Code:
I am getting error while transfering a directory tree ...
View 1 Replies
View Related
Aug 20, 2009
i have fedora11 installed on my computer as well as windows xp,but now i want to delete all my drives from windows and add those drive to fedora11 because i do not need windows any-more.how can i do that?also i want to increase size of root partition, can i do that?
View 1 Replies
View Related
Apr 27, 2010
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
View 6 Replies
View Related
May 6, 2011
I want to install a Centos 5.0 Virtualbox for Windows 7 x64. Can someone please let me know where I can go to get that, because I would like to have the virtualbox to further understand how LINUX works. I have taken a course in Redhat Enterprise Linux Computing Essentials, and I enjoyed using LINUX. So that is why I am searching for a 5.0 free download of Virtualbox.
View 8 Replies
View Related
Jan 25, 2011
I no it can be done BUT you could explain in easy form how to install into wine please, or virtualbox.
View 2 Replies
View Related
Jul 15, 2011
how to install linux redhat and oracle 11g in sun virtualbox?. That thing is giving me a lot of headache.
View 2 Replies
View Related
Jun 6, 2011
I'm using VirtualBox on MacOS and I need to install version 10.0.4 of Ubuntu.The setup for VirtualBox only allows you to specify Linux > Ubuntu (64-bit).How can I install a particular version? I've been told that you can download it as a disk image and install it in VirtualBox somehow: can anyone point me at more details?
View 2 Replies
View Related
Mar 4, 2009
1. Why do we need to use virtual simulation software such as VirtualPC, VirtualBox and VMWare to install linux?
2. Why linux OS always came with newer version and updates?
View 2 Replies
View Related
Sep 24, 2009
My Fedora11 hangs on boot. I have no idea where or why it is hanging so I want to disable graphical boot. I booted the installation media, the root file system mounted on /mnt, seted /mnt as my root with the chroot command and edited /etc/inittab, then unmounted and rebooted but it didn't help me. Is it possible to run gconf-editor under live cd and disable splash? How can I boot Fedora in single mode? For example use the following steps I'll be able to boot RHEL into single-user mode:
At the GRUB splash screen at boot time, press any key to enter the GRUB interactive menu.
Select Red Hat Enterprise Linux with the version of the kernel that you wish to boot and type a to append the line.
Go to the end of the line and type single as a separate word (press the Spacebar and then type single ). Press Enter to exit edit mode.
View 5 Replies
View Related
Feb 27, 2010
i am using NCTUns simulator and having problem while receiving message from an OBU. sending a message works properly but recving creates problem and fails. i am using exactly the same function as used by the developers in the demos but still no luck. i copy the code attch the screen shots to have a look
sendto() and recvfrom() are used for message transfer. they both return >-1 if they are executed successfully. please have a look in the screenshots. agentClientReportStatus is the built in packet format which im using here whose fields i filled manually are in the code below.
agentClientReportStatus *message,*mssg;
int remainTime,n,n2,n3,i,sendingaddress,value;
sockaddr_in cli_addr;
timeval now;
[Code].....
View 3 Replies
View Related
Mar 17, 2011
I have Intel Atom based development board which has eMMC chip. I can successfully boot Fedora 11 on this board from SATA drive. However Fedora doesn't see this eMMC chip as external storage. The "fdisk -lu" command doesn't show presence of any mmc device.
View 4 Replies
View Related
Jun 21, 2010
how to compile assembly code in linux? I am using AMD processor code instructions...is that amd registers inbuilt? with what file extension i should give while writing assembly code program?
View 14 Replies
View Related
Aug 20, 2009
i have fedora11 installed on my computer as well as windows xp,but now i want to delete all my drives from windows and add those drive to fedora11 because i do not need windows any-more.how can i do that?also i want to increase size of root partition, can i do that?
View 2 Replies
View Related
Sep 12, 2009
I have one Windows-XP on Machin 1 and one Linux on Machine 2. I want make Linux machine as CVS server and Windows Xp as CVS client. How to setup CVS Server in Fedora-11 machine and CVS client in Windows Xp?
View 1 Replies
View Related
Apr 22, 2010
I have installed Fedora 11 and Fedora 8 on two differnt machines and I am doing an rdesktop to connect to a Windows 2003 server. The connectiviy is pretty fast when I try and connect the same from fedora 8 machine but it very slow when I try and connect it from fedora 11 system. I have tried using TS client but even then it is pretty slow. I have also tried using an Nvidia 8400 graphic card and Nvidia 9600 on Fedora11 OS.
I have also tried using Fedora12 OS as well. Is there any thing specific I can check on Fedora11? Or do I need to do some thing on my windows 2003 machine?
View 1 Replies
View Related
Feb 10, 2010
I want to compile the the source code given in a well known unix programming book(stevens) .I downloaded the codes but unable to build it ,giving me an errorerror: stropts.h: No such file or directoryI don't know what to do....I am using fedora 11 latest gcc in the system.
I also try to include the search path which include a file -I./usr/include/xulrunner-sdk-1.9.1/system_wrappers but itI open the header file and the definition is there #include_next<strops.h>so ultimately there is not the original file
View 5 Replies
View Related
Apr 3, 2011
I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?
View 2 Replies
View Related
Oct 14, 2009
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors.I have two Geforce Fx3500 card in the machine.
View 10 Replies
View Related
Oct 14, 2009
I have just installed Fedora11 on my machine - the installation failed to start the x server so I had to install with the textbased installer. When the installation completes, I boot up and first I update Fedora with "yum update". Then I install a nvidia driver with "yum install kmod-nvidia". Then I run nvidia-xconfig to make a config file. But when I try to run "X", I just get a blank screen. I can run system-config-display fine, and setup my resolution etc. The log doesnt seem to give me any errors. I have two nvidia Fx3500 card in the machine. I have tried the 173, 185 and 190 driver - same thing.
View 2 Replies
View Related
Mar 8, 2011
I am have some issues getting VboxAddtions installed. I try to mount a shared folder and I get... FATAL: Module vboxvfs not found. When I try to install the additions I get...
Code:
jgleaso@linux-s7o8:/media/VBOXADDITIONS_4.0.4_70112> sudo ./VBoxLinuxAdditions.run
root's password:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.0.4 Guest Additions for Linux.........
[code]....
View 4 Replies
View Related
Mar 8, 2010
I was trying to install VirtualBox from AUR [URL]... it wants libpng12, which is outdated and makepkg cannot install it. Whan should I do? Here is what happens:
[code]...
View 3 Replies
View Related
Oct 28, 2009
This is my humble tutorial on how to get VirtualBox up and running on Fedora 12. It's located on my web blog here: How To: Install VirtualBox 3 on Fedora 12 [Tutorial]
View 7 Replies
View Related
Jul 2, 2010
What is the best way to do this..and should it work well with F13? Can it be done with yum? I read here that you need to install Qt first but am not clear if that is really a requirement or if that can be done with yum as well:[URL]Are there any other installation requirements necessary? I saw posts mentioning specific kernel versions and deleting old kernels.... looking for the safest and simplest way to set this up
View 13 Replies
View Related
May 13, 2011
I'm on Fedora 14 and tried to install virtualbox using yum install virtualbox It seemed to install but wouldn't run and I got messages saying there was an issue with it not recognising the kernel. I used the Add/Remove software function and added the right kernel but on reboot it didn't complete the boot up process. I get as far as the loading progress bar being fully loaded but don't get to the login screen I've tried loading earlier kernels to no avail - the same issue.
I can access the install via my live CD but I'm not that experienced a user and how to proceed. My guess is I need to remove all the Virtualbox components but I don't know how from where I am.
View 4 Replies
View Related
