I'd like to compile a generic kernel for my netbook on my desktop. They are both F12 64bit. On my desktop can I do:
make xconfig
make
make modules_install
Then copy the folder to my netbook then:
make install? Is there a better way? I don't really want to make .rpms.
I am trying to figure out how to load the generic kernel in Grub2.
I have run the /usr/hare/mkinitrd/mkinitrd_command_generator.sh and ran the output:
Code:
Why this will not load.
When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
View 1 Replies View RelatedI need to build a new kernel. I was directed toI tried following the instructions but I think I may have ended up with way more than I wanted. After just over 3 hours the build exhausted the 5.2GB I had available and fell over. The .config file used was nearly twice the size of the one I supplied. Why was it changed?I don't need an rpm.Are the patches supplied with the 2.6.38 sources required or nice to have?
View 3 Replies View RelatedMy VMWare Player was working fine After updating the kernel it is throwing the error "Unable to build kernel module" my kernel is 2.6.40-4.fc15.x86_64 what to do?
View 2 Replies View RelatedI'm building a Kernel on System A to use on System B. I've followed the walkthrough on [URL], and I get the following rpms:
kernel-debuginfo-common-i686-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-firmware-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-debuginfo-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAEdebug-devel-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-debuginfo-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
kernel-PAE-devel-2.6.30.8-64.hymerfania_dbg.fc11.i686.rpm
What I don't get are any
kernel-headers-<version>.<arch>.rpm
Files. Don't I need them to rebuild modules and drivers on System B? Otherwise, how should I copy my new headers to System B? BTW, System B crashes when I try to build the Kernel on it, that's why I'm building debugger Kernels on System A.
I am having problems install VirtualBox and followed the errors to see that the link for Build (2.6.29) links to a non existent folder.
I also find it weird that there is actually a 2.6.30 kernel folder as well.
Not sure if this is just n00b issue, but VBox won't install and I was wondering why one of the kernels listed would link to nothing...
I have a fresh installation of Fedora14_x64 and after that I have updated the OS also.
Then I have installed VMware-Player-3.1.2-301548.x86_64.
All the installation procedure has completed successfully without any error.
But when I am going to run VMWare It is throwing some error.
I am attaching all the needed screenshot and log file also.
I had no problems up to the newest kernel version. But for 2.6.40-4 akmods fails to build the kmod with the following error:
Code:
Building RPM using the command '/usr/bin/akmodsbuild --target x86_64 --kernels 2.6.40-4.fc15.x86_64 /usr/src/akmods/VirtualBox-OSE-kmod.latest'
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-4.fc15.x86_64/vboxnetflt/vboxnetflt.mod.o
LD [M] /tmp/akmodsbuild.yob64XwN/BUILD/VirtualBox-OSE-kmod-4.0.4/_kmod_build_2.6.40-
[Code]...
I want to compile a custom kernel, because I need a path for a device. Here is what I've done:
Code:
$ cd /media/work/temp/
$ apt-get build-dep --no-install-recommends linux-image-$(uname -r)
$ apt-get source linux-image-$(uname -r)
$ cd linux-2.6.31
[Code].....
What is the difference between those kernels that you can install from this PPA:
[URL]
ppa:kernel-ppa/ppa
...which currently has 2.6.35-19.25-generic
AND
[URL]
...which currently has 2.6.35.3-maverick (even has later version 2.6.36-rc2-maverick)
AND
[URL]
...which currently has 2.6.35.3 (even has later versions 2.6.36-rc2 and 2.6.36-rc2-git4)
Are they the same? Which is newer? Is 2.6.35-19-generic = 2.6.35.3?
Just installed the patches/upgrades for the 2.6.35.30 kernel. Ubuntu will not boot without me typing "y" and hitting enter and later hitting the enter key again. Just have a blank screen unless I do this. Discovered what to do by booting into recovery mode. Had to make a display selection. Just guess at the enter key the second time the boot process stopped. I new to Ubuntu so don't know where to look in the logs to provide additional information to help trouble shoot the problem. If some one can guide me as to where to look I'll post log info. Hope this is the right place to post this. If I need to make a bug report let me know.
Forgot to add: HP Pavalion dv5000 (dv5020us to be specific). AMD Turion64 processor. ATI Radeon Mobility 200M video.
I was previously using kernel-huge until a slackware update caused some problems for me, so I switched over to kernel-generic but now I'm wondering if it uses both of my cpus on my dual core processor.
View 1 Replies View RelatedOne thing I always do is switch to the vmlinuz-generic(-smp) kernel in /etc/lilo.conf and build an initrd (see /boot/README.initrd for details). The "huge" kernel used by default is only meant for installing and not recommended for everyday use. It has a lot of drivers you don't need built-in and uses more RAM than the "generic" kernels.
still trying to find my feet and get to know Slackware. In one of my previous threads, 'things to do after installing' i was told the above message. When i installed, it used the huge kernel, but i'm unsure if that was the one that got installed. when i start slackware up, above the login screen it say, �wecome to Linux 2.6.37.6-smp (tty1)� I was wondering how to swich to the generic smp kernel, do I just change the vmlinuz to the desired, in lilo?
I reported a bug at [URL].., then I had been asked to test the latest generic kernel in order to test whether the bug exist in latest kernel or not. I had read the information at [URL]... I installed the most current version of generic kernel. After that, I restart my computer and try to use the latest installed kernel. Then, the laptop freeze. Then, I restart my computer by turning off and on again, select the older kernel, successfully boot into Ubuntu to post this thread. What can I do since I am required to test the latest generic kernel?
View 2 Replies View RelatedI installed Mint 9 and directly after installation there were updates to download and install, which I did. One of the updates is a newer kernel, 2.6.32-24-generic.
When I manually install the nVidia driver 256.44 and restart gdm it works. When I reboot I land in low resolution, have to remove and re-install the older (195.36) driver through "Hardware Drivers". Somehow the new kernel and the latest nVidia don't match together. Am I the only one suffering from this or are there more people with this problem,and what to do about it?
I just noticed I'm not running with the latest kernel.
This box was originally installed as Ubuntu 10.04, then upgraded to 10.10.
I just recently noticed that, even though kernel 2.6.35-24-generic is installed, this box seems to insist on booting up with 2.6.32-24-generic.
Looking at /boot/menu.lst, it looks ok. (default is 0, and first kernel in list is 2.6.35-24. 2.5.32-24 is the *last* one in the list!)
Trying to compile Kernel 2.6.35 on Ubuntu 9.10 (2.6.31-14-generic).
got: The UTS Release version in include/linux/version.h""
does not match current version:
"2.6.35-xxx"
Please correct this
make[1]:***[debian/stamp/install/linux-image-2.6.35-xxx] Error 2
make[1]:***leaving directory `/usr/src/linux-2.6.35'
make:*** [kernel_image] Error 2
Can any one tell me what should I do? Is this Ok for using the compiled vmlinux image?where can I find the correstponding initrd file if this kernal compile is Ok?
I've changed for huge kernel to a generic+initrd setup per the instructions in the README.initrd file however my machine fails to boot using that method. I get the following errors:
/boot/initrd.gz: Loading kernel modules from initrd image:
mount: mouting /dev/sda2 on /mnt failed: No such device
ERROR: No /sbin/init found on rootdev (or not mounted)
1. I've created the initrd using the results from /usr/share/mkinitrd/mkinitrd_command_generator.sh
mkinitrd -c -k 2.6.33.1 -f ext4 -r /dev/sda2 -m usbhid:ehci-hcd:ext4 -o /boot/initrd.gz
2. my root fs is ext4 on /dev/sda2
3. I've changed all necessary links in /boot
4. I've changed my /etc/lilo to:
image = /boot/vmlinuz
initrd = /boot/initrd.gz
root = /dev/sda2
label = Linux-Generic
read-only
I am going to change my hardware soon, just a new motherboard and cpu, same sound card,gfx card and other stuff. Will it boot and run ok ( like a live cd/dvd) until I have time to do a reinstall or does it have specific ports the hardware is installed on now?
View 6 Replies View RelatedI was interested in the idea of the btrfs subvolumes, so I made a virtual machine and installed Slackware as per the instructions here: [URL] It all went very well, but when I tried to switch from the huge kernel to the generic kernel and use the initrd.gz generated from step 29 (except that I used 2.6.37.4-smp instead of whatever's there) in lilo.conf, it failed to boot. I also noticed that in the instructions themselves, the poster doesn't actually add the initrd.gz to lilo.conf, so I'm guess the huge kernel has everything it needs to boot properly.
View 13 Replies View RelatedI've installed Slackware64 on a Toshiba Qosmio laptop (booting with ext4, SAMSUNG HM500JI HDD, 3 GB Ram, Intel Core 2 Duo Processor, Intel chipset and graphics).The system boots the huge kernel just fine. But after booting with the generic kernel AND after having prepared a mkinitrd with the mkinitrd generator, the boot process crashes at ~4sec with a panic.
View 14 Replies View RelatedI've recently upgraded from Ubuntu 9.04 Server edition to Karmic Koala 9.10 server.Earlier when I ran uname -r it showed: KernelVersion-serverNow the current version I've upgraded to shows 2.6.31-20-generic-pae.Should the Ubuntu server edition be using a generic-pae kernel?
View 9 Replies View RelatedMy sound was working in the past, but since I upgraded to kernel 2.6.31-20, it's no longer working. I am using Ubuntu on a Macbook and followed instructions from the Macbook 6,1 wiki on [URL]... I just installed the lastest alsa-driver using the following commands:
[code]...
I installed Ubutnu 9.10 Server on my Dell Server for LAMP & OpenSSH server. After the install was complete, I noticed the the kernel installed on the server was 2.26.31-14-generic instead of 2.26.31-14-server.I am wondering why would generic kernel be installed from ubuntu-server 9.10 cd? And how do go about chaning to server kernel? Or do I even need to do that? Would generic kernel work as server kernel ?
View 2 Replies View RelatedI have problem with my laptop, the last week I update my kenel to 2.6.32-24-generic-pae and in this moment the wireless drive dosen't work.
View 1 Replies View RelatedI did the kernel update via Update Manager today. Unfortunately , after this , disaster happened whereby sh.grub> prompt appeared on screen.
I got no idea how to rescue or repair the grub. I installed Ubuntu 9.10 in my E: under Windows 7 partition and labeled as "ubuntu". It has dual boot capability.
This week my ubuntu 10.10 was updated via update center. I obtained the new kernel headers 2.6.35-23-generic but now I can't boot using this kernel version and I have to select manually 2.6.35-22-generic in grub. I can see the ubuntu plymouth splash screen but it never rise gnome. where are the boot logs and how to activate them, In /var/log/ I have "boot" file but is empty and in "boot.log" I cant see any usefull information (I have BOOTLOGD_ENABLE=yes in /etc/defaul/bootlogd).
View 4 Replies View RelatedI'm on Ubuntu 10.10 - fresh install 2 days ago, I marked all packages for upgrade in Synaptic, everything upgraded except 'linux-image-2.6.35-22-generic' kernel image. Now everytime I use apt-get or synaptic it takes ages as it tries to update the kernel image every time. The error I am receiving is as follows:
[Code]....
My Slackware boots using the huge kernel. I am not using LILO; I am using GRUB from the extras directory on the DVD. I followed the tutorial @ [URL] up to the point where it discusses modifying LILO. My /boot/grub/menu.lst reads, in part:
# Linux bootable partition config begins
title Slackware Linux on (/dev/sda7)
root (hd0,6)
kernel /boot/vmlinuz root=/dev/sda7 ro vga=normal
# Linux bootable partition config ends
This boots the huge kernel. What changes must I make to the above menu.lst entry to boot using the generic kernel?
