Hardware :: USB Wireless Pointer / Slide Changer Stopped Working On Fedora 11?
Jan 1, 2010
Distribution - Fedora 11
Kernel - 2.6.30.9-102.fc11.i686.PAE
I have a USB pointer/slide changer, which was working fine in Fedora 9 and also works fine in Windows or even some old Fedora 2 on a Desktop.
After I did a fresh install of Fedora 11 and updated it with all the new packages, It is no longer working. Here is what output of "lsusb":
======
Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 4 Replies
ADVERTISEMENT
Mar 18, 2010
I am having problem with wireless networking my fedora 12 since i opened network manager yesterday. But to my notice i haven't done any changes. But still i am not able find any reason for the wireless network not to work. When i try to restart the network servies it gives the following msg.
Quote:
Bringing up interface eth0:
This version of ISC DHCP is based on the release available on ftp.isc.org. Features have been added and other changes have been made to the base software release in order to make it work better with this distribution.
Please report for this software via the Red Hat Bugzilla site: [url]
Did i do something wrong with the network manager or did something go wrong with fedora.
View 2 Replies
View Related
Sep 17, 2009
I have a wireless router at home, but I usually have my laptop connected to it through an ethernet cable. It had always worked with no problems until some time last week when the wired network stopped working (but the wireless still works with no problem). At first I thought that it was some update, but no. My laptop works ok with the wired network at my office, and I also tried a different laptop at home and it didn't work. It's not the cable either, I tried a different one. I haven't changed any settings in my router.So I really don't know what's going on. I just find it weird that the router's wired networking suddenly stops working but the wireless still works fine...
View 1 Replies
View Related
Jan 9, 2010
I have a relatively new F12 install (one week old) on which I got my wireless Broadcom card working using kmod-wl-PAE. It was a very easy process - not really a process just yum install kmod-wl-PAE.
After a few updates, I notice that the wireless card stopped working. I assumed maybe there was an update that conflicted, so I did a reinstall of kmod-wl-PAE and it worked again immediately.
Then I started installing compiz-fusion. Immediately after, wireless is broken again. So I yum erase kmod-wl-PAE and then yum install kmod-wl-PAE and it works again.
Now, only slightly later that same day, wireless stops working more or less randomly and I cannot get the reinstall of kmod-wl-PAE to fix it. So I uninstall, disable compiz-fusion, shut down, and restart the computer to try again. My thought is that maybe along the way my autostart compiz or something about compiz is causing the wireless not to configure properly. When I restart, wireless is working. Without kmod-wl-PAE installed:
yum info kmod-wl-PaE
Loaded plugins: presto, refresh-packagekit
Available Packages
Name : kmod-wl-PAE
Arch : i686
[Code].....
One, how is this even possible, and two, what is going on with the wireless working, not working, working, not working?
View 14 Replies
View Related
Mar 7, 2010
have a gateway nv78 laptop. I just ran the latest update on Fedora 12, and after Fedora stopped seeing wireless networks all together.
View 8 Replies
View Related
Oct 1, 2010
Just acquired a slide/negative scanner (Traveller TV6500) which is reputed only to work under Winderz. Anyone know of a way to get it to run under Fedora 12?
I'm running
Linux Fedora-Blue 2.6.32.21-168.fc12.i686 #1 SMP Wed Sep 15 16:25:04 UTC 2010 i686 athlon i386 GNU/Linux
lsusb shows
Bus 001 Device 019: ID 05a9:1550 OmniVision Technologies, Inc. VEHO Filmscanner
I've tried running it in a VirtualBox Windows XP, but it doesn't appear to work - goes off & churns but doesn't appear to get a picture back.
View 1 Replies
View Related
Sep 23, 2009
A few days ago (september 7) my wireless suddenly stopped working. I am using FC11, and have an Atheros AR5211 wireless card and have been using the ath5k driver with GNOME NetworkManager. Wireless networks are detected by NM perfectly fine. When I try to connect, the icon spins around those two dots, and one of them becomes green. If the network is wep protected, it asks for the password. After a while, it times out, regardless of the protection. I don't remember changing pretty much for the last two months, so I'm sort of surprised. I did download and install a kernal, along with an selinux-policy update.
If I run dmesg, relevant looking lines included:
ADDRCONF(NETDEV_UP): wlan0: link is not ready
and a long series of these at the end:
wlan0: direct probe to AP 00:0b:86:4f:8a:20 try 1
wlan0: direct probe to AP 00:0b:86:4f:8a:20 try 1
[code]....
Note: I previously posted this in "Laptops," but Networking seemed like a better place to do it.
View 14 Replies
View Related
Jan 12, 2010
I have a Broadcom wireless card in my hp dv6500z laptop, I had it all working properly in FC9 thanks to bbfuller and his post on the subject. After I upgraded to FC11 I have been unable to get it to connect.
I can see my neighbor's sites and suppose I could see my own if the SSID was allowed to broadcast but I keep that turned off. I put in all of the setting, including the network security key, but it won't connect, then when I go back and look again, the security key is not even close to what I put in; it gets changed to a huge string of characters.
I redownloaded broadcom-wl-4.150.10.5.tar.bz2.tar and followed the instruction on the post once again but no luck, which, after I thought about it, was a waste of time because if I can see other's wireless, then the card must be working. I have tried using Network Manager and not using Network Manager and still no luck...
View 6 Replies
View Related
Jul 29, 2010
I use Fedora now for 2 days and all worked fine, but now I have a problem:My wireless internet doesn't work anymore. Normally I see a icon at topbar that tells me I'm connected but now it doesn't.I connected my laptop to my router directly and downloaded WiFi radar to see if that works. That program says: "Not connected".I'm sure the internet card is connected and the switch on my laptop is on. I only deleted BlueTooth, but I don't think that's the problem.
View 1 Replies
View Related
Sep 11, 2009
I have an HP mini 110 with Fedora 11 install. I installed the broadcom-wl and wl-kmod from yum but still no wireless. First I can't get the broadcom card to turn on using the slide switch on the front of the computer. The device is inactive in the network configuration-devices window. The card is not in the network configuration hardware window. When I try to add it manually, there is no entry for the card in the drop down list. I am new to Fedora but have used linux for years. Unfortunately this is my first attempt at wireless networking.
The posts and google stuff doesn't say much more than "yum install broadcom-wl" Can anyone point me into the right direction? I have a feeling I am missing something very simple, because this computer dual boots Linux Mint and wireless works flawlessly.
View 12 Replies
View Related
Jul 13, 2011
When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
View 1 Replies
View Related
Jun 6, 2010
The wireless on my 64-bit openSUSE-11.2 installed on my Dell Studio 1537 laptop stopped working some time back (possibly more than a one or two months back). I just discovered this last week when on business. I have not used the wireless under openSUSE-11.2 for a while so I am not certain what broke it, but I am suspicious of an update. I note openSUSE-11.3 milestone-7 works great with the wireless (on a liveCD). I note possibly two related threads, although I note no failed request for firmware in my case:request for firmware file 'iwlwifi-5000-2.ucode' failed [INTEL 5300 AGN] [OPENSUSE 11.2] - openSUSE Forums, and I see another thread here: Suddenly No Wireless Network Card - openSUSE Forums... but I can not tell if what I have is the same problem, so I did not add to those threads. In my case I can scan for the network, and see the SSID. An ip address is assigned. But a ping does not work.
Some details, the wireless is:
Code:
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Kernel driver in use: iwlagn
In terms of installed apps:
Code:
rpm -qa '*wireless*'
wireless-tools-30.pre8-5.1.x86_64
wireless-regdb-2009.09.08-2.2.noarch
[code]....
I know the router wireless network is good, because I can connect to the router via wireless with another laptop (old Fujitsu-Siemens Amilo 7400M with older Intel wireless), and the router wireless also works with this Dell Studio 1537 PC (with same hardware) but with openSUSE-11.3 milestone7 version.
View 9 Replies
View Related
Oct 21, 2010
I have Fedora 13 x86_64 on my Lenovo Ideapad laptop. I am not able to run vlc. When I run vlc in a terminal, I get the following output.
Code:
VLC media player 1.1.4 The Luggage (revision exported)
*** glibc detected *** vlc: free(): invalid pointer: 0x0000003ffc6f43a0 ***
Backtrace:
/lib64/libc.so.6[0x3ff4c75676]
/usr/lib64/libstdc++.so.6(_ZNSbIwSt11char_traitsIwESaIwEE7reserveEm+0x8e)[0x3ffc4b497e]
/usr/lib64/libstdc++.so.6(_ZNSbIwSt11char_traitsIwESaIwEE6appendEmw+0x81)[0x3ffc4b4ab1]
/usr/lib64/libtag.so.1(_ZN6TagLib6StringC2EPKcNS0_4TypeE+0xdc)[0x3011c51aac]
/usr/lib64/libtag.so.1[0x3011c359c9]
/usr/lib64/libtag.so.1[0x3011c6d416] .....
I have tried reinstalling vlc.
View 3 Replies
View Related
Feb 25, 2010
pulled the wireless USB adapter out of the back of my laptop when I was using it. I plugged it back in and it can see my wireless network, but it can't connect. Everytime it tries, it just shows the connecting icon on the top bar for a few minutes and then says that the network has been disconnected.
I've tried uninstalling and reinstalling the USB adaptor, but nothing I've done seems able to fix the issue. Anyone know how to fix this?
The USB adaptor I'm using is a Trendnet TEW-424UB
View 1 Replies
View Related
Apr 29, 2010
I have had ubuntu about a month now and everything has worked great up until now, I was surfing the web and all the sudden I lost connection. I tried to connect to the signal but got nothing so I did a reboot. After the reboot my wireless signal didn't show up. i right clicked the connection icon on the top taskbar and the enable wireless is blacked out to where i cant click it.
View 7 Replies
View Related
Aug 4, 2010
Just recently the wireless stopped working on Ubuntu 10.04. The machine is AcerOne AOA-150. I did notice recently the wireless would stop working, and I would need to either 1) reboot 2) switch the wireless off by moving the switch from left to right in front of the laptop.
However, this time nothing is working. I've provided some detail and if more information is needed, let me know.
LSPCI:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
[Code]....
View 4 Replies
View Related
Aug 17, 2010
My wireless mouse stopped working about a week after i bought it. i replaced the batteries, and tried restarting my computer. I also tried putting the receiver in all of the other usb ports, to no avail. Where is the driver software that was installed when the receiver was plugged in located on my computer? I plan to un-install this and hope that it works when it is installed again.
View 1 Replies
View Related
Nov 19, 2010
A couple days ago I booted up my Ubuntu 10.10 machine as usual,but the wired LAN connection did not work; it doesn't seem to see any wired connection devices. I can still connect to a wireless network with no problem, and if I plug that same ethernetable into another machine it works fine. I've been happily using this setup for weeks; the LAN only stopped working a day or two ago. So I figure there's two possibilities:A recent update caused NetworkManager to stop working with wired LAN connections, but I'm e only persothed affected (unlikely)My motherboard's ethernet port died (this motherboard only a couple weeks old, so this also seems unlikely)I'm not good at diagnosing problems with networking, so who can tell me where to st
View 9 Replies
View Related
Jul 26, 2011
Yesterday I installed many updates on my compaq presario cq60-214dx running ubuntu 11.04.
This morning my 2 year old son was pressing buttons, generally playing with the notebook. When he was done the wireless stopped working. I cannot get it to come back on. What could he have possibly done without entering the password.
I have restarted several times. ifconfig does not show the wireless adapter. iwconfig says its not active. i turned on txpower using iwconfig but still nothing.
View 6 Replies
View Related
Nov 25, 2010
I'm running Slack 12 on a Thinkpad T60 and my wireless has stopped connecting to my wireless network at home. I'm using wicd for network management and it was working up until yesterday. I don't know what to do to track down the problem, so I'm looking for advice to do so.Other wireless devices in the house can still connect, so I don't believe my router is the problem.
View 6 Replies
View Related
May 18, 2010
After upgrading to the latest Ubuntu, my wireless card stopped working. I keep on pressing the button but the little orange light wont come on...I have an aspire 5517 with "Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)" I have tried drpjkurian's tutorial for madwifi with no success . (http://ubuntuforums.org/showthread.php?t=1309072
View 2 Replies
View Related
May 25, 2010
I updated to 10.04 recently and everyhting worked fine. Yesterday my wireless stopped working. Now I just get "Networking disabled" when I mouse over the greyed out wireless icon. Everything still works fine when I boot windows.
Here's the details from the HOWTO log an wireless issue guide http://ubuntuforums.org/showthread.php?p=6183681 . sorry for the length of dmesg and lsmod , I couldn't figure out how to add a spoiler tag on this forum. code...
View 1 Replies
View Related
Jul 24, 2010
I'm using Ubuntu 10.04. I was happily connected to internet and surfing some forum, when wireless connection suddenly stopped working.
Now I can't find any access point, and I'm pretty sure I didn't do anything to justify this behaviour.
It already happened a month ago, but I had to format my drive, so I didn't really bother to try to solve the problem.
Anyway. I'm posting here the results of the commands I think I can help with a diagnosis; if something else is needed.
I'm using a different computer to post this thread, so I'm manually writing the output.
Code:
sudo iwconfig wlan0
wlan 0 IEEE 802.11bg ESSID: off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
sudo iwlist wlan0 scan
wlan0 No scan results
View 2 Replies
View Related
Oct 20, 2010
About a week ago I upgraded to Maverick from Lucid.
All networking worked fine on Lucid.
I am using an Acer Laptop with the Atheros AR928X Wireless Network Adapter.
I can connect to my home network (visible, with WPA2-Personal) fine. However, I cannot connect to my university's wireless network. The only difference I noticed is that its network is using WPA2 Entreprise with Tunneled TLS Authentication and MSCHAPv2.
I tried dmesg and I got:
wlan0: authenticate with 00:1a:1e:ef:f4:e1 (try 1)
wlan0: authenticated
wlan0: associate with 00:1a:1e:ef:f4:e1 (try 1)
wlan0: RX AssocResp frin 00:1a:1e:ef:f4:e1 (capab=0x431 status=0 aid=2)
[Code].....
Unless the driver has changed, I suspect this is not a driver issue, since it worked fine on Lucid. Is this a NetworkManager issue?
View 1 Replies
View Related
Jan 18, 2011
I have a HP Mini 5105 SSD netbook, runing Ubuntu 10.10 with 2Gb RAM. My wireless card is a Broadcom BCM43224 802.11a/b/g/n. Its driver is enabled and running. The wired network connection runs fine too. The problem: Wireless stopped working. When I right click on the network icon, the enable network option is clicked, but the "enable wireless" option is listed in dark grey and cannot be clicked on. I have recently updated my kernel version to 2.6.35-24-generic. What I have already tried: this one too I got to know there seems to be a problem with the 2.6.35-24-generic kernel. I have gone into the GRUB menu (it took some time to find out that you have to keep the Shift key pressed during startup for the GRUB menu to show), chosen the older kernel version (2.6.35-23-generic) and then removed the faulty one. Nevertheless, nothing has changed. I still cannot enable the wireless. The outcome to lshw -C network is:
[code]...
View 8 Replies
View Related
Apr 18, 2011
I'm running a gateway lapbook w/10.04 LTS and an etheros wirless card. Card has been working fine for almost a year - from cold boot, warm boot, and recovery from standy (shut lid, open, press power button). I was fiddling with setting a static IP for the wirelss card by modifying the interfaces text file. I made some changes, and restored the file to its original contents after some noodling around. Wireless still worked fine after that. Last night I took the laptop out of suspend as usual - lifted lid, pressed power button - but the wireless indicator remained grayed out and I haven't been able to reenable wireless connectivity since. ifconfig shows the wireless card is there, and cabling the e-net port directly to my hub works fine.
View 3 Replies
View Related
Jul 13, 2011
I go to the icon and it says "wireless is disabled by hardware switch", well I didn't press any hardware switch. My laptop is a Dell L501X, the "hardware switch" is the Fn button and F2. I've tried pressing this but nothing happens.
Is this a bug with the latest linux version? Cos everything was working fine until my laptop updated.
The version I have now is "Linux 2.6.38-10-generic"
I'm running 11.04 64bit.
Here is some info from console :
Quote:
me@XPS-L501X:~$ sudo ifconfig -a
eth0 Link encap:Ethernet HWaddr f0:4d:a2:59:00:34
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::f24d:a2ff:fe59:34/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]....
View 5 Replies
View Related
Jan 30, 2010
After doing a reconfigure of my wrt54gl router, trying to activate WEP encryption, and then finding WICD wouldn't connect, and returning to the original config on the router, now wicd won't reconnect the wireless card. Here's the wicd.log entry from the attempt to connect:
Code:
2010/01/30 18:40:46 :: ifconfig wlan0 up
2010/01/30 18:40:46 :: iwlist wlan0 scan
2010/01/30 18:40:47 :: ifconfig eth0
2010/01/30 18:40:47 ::
2010/01/30 18:40:47 :: {}
2010/01/30 18:40:47 :: hidden
2010/01/30 18:40:48 :: scanning done
2010/01/30 18:40:48 :: found 4 networks:
2010/01/30 18:40:48 :: found use_settings_globally in configuration 1
2010/01/30 18:40:48 :: found afterscript in configuration None .....
View 3 Replies
View Related
Jan 20, 2010
Today my wireless has stopped working. I have a laptop hp6720s with network controller: Intel corporation PRO/Wireless 3945 ABG [Golan] Network connection (rev 02), dual boot vista/ubuntu 9.10, fully updated (kernel 2.6.31-17). I use a router edimax BR-6204 wg to use the net with other laptop. Till now i have using wicd for controll wireless without any problem, internet was quick and responsive. (Quick connection without any failure).
But today the internet was very slow and wireless starts to connect and disconnects intermitently, doing it unusable. This was what occured when i upgraded from jaunty to karmic and used the network manager from gnome, but then i fix the problem installing wicd. Now wicd behaves in the same way as gnome-network-manager. If i connect directly the computer to the router by wire, i have internet and everything works perfectly. How i can fix the wireless?. How i can do it works with ubuntu 9.10 and?.
View 1 Replies
View Related
May 5, 2010
after having tried out almost all suggestions found here and elsewhere on the internet, i'm somewhat at my wits end The situation: I'm running Kubuntu 32Bit Version (at the mom 10.4) on a HP-Compaq 6735s (AMD Processor, Vanilla 32Bit Install). My first Install was last year with 9.4 and the Broadcom 4322 wireless worked like a charm after installing the proprietary STA-driver under System -> Hardware Drivers. As the update didn't work out really without glitches, i did a fresh install and lost my wireless. I tried various combinations and tutorials but to no avail. My card is found, the driver installed, but i cannot access my access-point. I can SEE the access point (and all my neighbors'), but knetworkmanager does not seem to do anything. To be sure, I installed wicd (nice tool by the way). Trying a connect here told my my credentials were bad (incorrect passphrase for my WPA2 Personal auth), which is not true. I tried connecting without security, didn't get an IP. So it seems somehow the card is working, but all functions needed for passing information to the access-point are unavailable.
This is what I tried:
both broadcom-drivers
fw-cutter
installing the driver by hand
Installing the driver via Hardware Drivers produced the same results as any other, viz the card is working, but not connecting. Unfortunately knetworkmanagers error messages are a bit sparse, or rather non existant. My guess is that somehow the firmware is not properly loaded (or the wrong type??).
View 9 Replies
View Related
