I'm running Slack 12 on a Thinkpad T60 and my wireless has stopped connecting to my wireless network at home. I'm using wicd for network management and it was working up until yesterday. I don't know what to do to track down the problem, so I'm looking for advice to do so.Other wireless devices in the house can still connect, so I don't believe my router is the problem.
View 6 Replies
After doing a reconfigure of my wrt54gl router, trying to activate WEP encryption, and then finding WICD wouldn't connect, and returning to the original config on the router, now wicd won't reconnect the wireless card. Here's the wicd.log entry from the attempt to connect:
Code:
2010/01/30 18:40:46 :: ifconfig wlan0 up
2010/01/30 18:40:46 :: iwlist wlan0 scan
2010/01/30 18:40:47 :: ifconfig eth0
2010/01/30 18:40:47 ::
2010/01/30 18:40:47 :: {}
2010/01/30 18:40:47 :: hidden
2010/01/30 18:40:48 :: scanning done
2010/01/30 18:40:48 :: found 4 networks:
2010/01/30 18:40:48 :: found use_settings_globally in configuration 1
2010/01/30 18:40:48 :: found afterscript in configuration None .....
I've used Katapult to launch applications on both my laptop and desktop boxes for a long time, but yesterday it stopped working on my laptop. It will bring up folders, but not apps. I checked the settings and compared the katpultrc file with the one on my desktop (they are the same) and also compared katapult.la and katapult.so from /usr/share/kde3 and they are the same also. I'm not having any other problems, and it doesn't appear to be a problem with katapult itself, and I'm getting no warnings of any kind. Also I have done the same package updates on both machines.
View 1 Replies View RelatedMy USB printer stopped working after I upgraded Slackware, using the Current.Also can not install any USB printer. CUPS version 1.4.2.
View 14 Replies View RelatedI just installed FC13 on my HP laptop and everything has been working great with one exception. When I plug in my headphones, it doesn't mute the speakers and there is no sound in the headphones. I've checked alsamixer and the gnome-volume-control and all necessary channels are unmuted and turned up. But I have no idea how to proceed. I'm afraid to make any configuration changes because I don't want to lose the sound completely. Here is the output from lspci
Code:
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller
fsck died with exit statusAn automatic file system check of the root file system failed. A manual fsck must be performed then the system restarted. The fsck should be performed in maintenance mode with the root file system mounted in read only mode..This is the message I now get with the word "warning" in red
View 2 Replies View RelatedI have a keypad with a numeric part to it (as well as the traditional numbers above the alpha keys)It stopped working after I installed Moonlight - and although I have uninstalled Moonlight it is still not working (I may be wrong that Moonlight was the problem, but I can't think of anything else)The number lock indicator still lights up, but there is no response to any numeric input. With the number lock key off, the alternative actions (cursor up, down, etc) work normally.
View 7 Replies View RelatedWhen originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
The wireless on my 64-bit openSUSE-11.2 installed on my Dell Studio 1537 laptop stopped working some time back (possibly more than a one or two months back). I just discovered this last week when on business. I have not used the wireless under openSUSE-11.2 for a while so I am not certain what broke it, but I am suspicious of an update. I note openSUSE-11.3 milestone-7 works great with the wireless (on a liveCD). I note possibly two related threads, although I note no failed request for firmware in my case:request for firmware file 'iwlwifi-5000-2.ucode' failed [INTEL 5300 AGN] [OPENSUSE 11.2] - openSUSE Forums, and I see another thread here: Suddenly No Wireless Network Card - openSUSE Forums... but I can not tell if what I have is the same problem, so I did not add to those threads. In my case I can scan for the network, and see the SSID. An ip address is assigned. But a ping does not work.
Some details, the wireless is:
Code:
04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5300 AGN [Shiloh] Network Connection [8086:4235]
Subsystem: Intel Corporation Device [8086:1121]
Kernel driver in use: iwlagn
In terms of installed apps:
Code:
rpm -qa '*wireless*'
wireless-tools-30.pre8-5.1.x86_64
wireless-regdb-2009.09.08-2.2.noarch
[code]....
I know the router wireless network is good, because I can connect to the router via wireless with another laptop (old Fujitsu-Siemens Amilo 7400M with older Intel wireless), and the router wireless also works with this Dell Studio 1537 PC (with same hardware) but with openSUSE-11.3 milestone7 version.
My laptop's (Acer Travelmate P243-M-6456) headphone jack had been working fine, and has no issues when booted into Windows, but it suddenly stopped working.
I've gone through alsamixer, and the volume is up, and nothing seems to be muted, and I've tried to do everything I could throughout the sound options in the Gnome System Settings.
Here is my ALSA information script output : [URL] .....
I've been running Ubuntu 10.04 on my Dell Studio laptop for a few months now with no audio problems. Last night I was listening to music just fine, then put my laptop to sleep and went to bed. Today, I go to play music, and nothing comes out of the speakers. Both headphone/speaker jacks work, but when I unplug the headphones, nothing happens.
View 2 Replies View RelatedYesterday I used slackupdate.sh [0.7.3] from darklinux.net to update Slackware 13.1, 32 bit version. I got Firefox 3.6.6, installed it, moved the libflashplayer.so to the new plugins directory. Now I can't play utube videos. about: plugins says that flashplayer is installed and working. Grabbed flash from Adobe website, overwrote the existing one, still no joy. Asked in the Firefox user forum. Answer 'same thing happen to me -- Windows Vista' ...I'm not an advanced user. So, is this a Slackware problem, an Adobe problem, or a Firefox problem? I'm asking here because y'all are more likely to point me to a solution. I've always been able to grab the Linux version of Flash from Adobe website and install it
View 7 Replies View RelatedI'm on Firefox 3.6.11 with Flash 10.2 d161 on Slackware 13.1 32-bit. Hulu stopped working sometime this past week. (Actually when it stopped working I was still on the previous versions of Firefox and Flash - I upgraded 3.6.10 to 3.6.11 to see if it would help.) Worked fine before that. I've tried Firefox safe-mode, disabling add-ons and using default theme and none of this matters. Flash works fine and Hulu worked fine before a week ago.
View 5 Replies View RelatedI have 13.0 64 with alien's multilib packages.
Adobe Acrobat has stopped working. If I try it from the command line I get
Quote:
./acroread: No such file or directory
I have tried re-installing but there is no difference and the file is clearly there. Is it possible a recent upgrade of a slackware patch might have caused this?
With Firefox 3.6 from the official repository, and the flash-player-plugin from Slacky.eu installed here. It's worked fine up until now, where websites either claim it's not installed, or show a blank box instead.NoScript is installed on my Firefox, but given that on fully trusted pages (of which there are very few) it still happens, and nothing else blocks Flash besides AdBlock and Firefox's own settings (both checked too) I suspect the plugin.I also tried downloading direct from Adobe, and plonking the libflashplayer.so in /usr/lib / mozilla/plugins and making a backup of the original one (The one provided from Slacky's package) but to no avail.So it seems to be the plugin, but for inexplicable reasons.Would anyone happen to be able to explicate this inexplicability?
View 12 Replies View RelatedSetting up my slackware system for prime use, i downloaded robby's xfce 4.8 package and upgraded xfce 4.6. Later i downloaded slackpkg and upgraded all my packages for the first time. When i did a restart, xfce 4.8 had gone back to xfce 4.6. I just went back to the directory where i was storing all the xfce 4.8 files and did the upgrade again, it worked; now for some reason though my terminal emulator no longer works, as regular user and root. I get an eroor saying, failed to execute terminal emulator. Input/output error.
View 3 Replies View RelatedWhen I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
View 1 Replies View RelatedAfter updating my system today, sound stopped working. VLC said I should update alsa-lib. Slackbuilds had none to offer, so I got the sources from http://www.alsa-project.org/main/index.php/Main_Page. It compiled and installed without problems, but the error from VLC states the same. Is my system the only one affected by the update, and how do I fix it?
View 4 Replies View RelatedI just installed Slackware 13 with xfce and everything went well (eventually). At first, my wireless didn't work, but then I found /etc/rc.d/rc.wireless.conf. Everything was working, and I was happily surfing and downloading packages.But then one day... It just stopped! I tried to ping google, and it could send packets but not receive them.I'm connecting through an unlocked network in my building, so I guess it's DHCP (thats what i set it up with the first time 'round
View 1 Replies View RelatedI am having problem with wireless networking my fedora 12 since i opened network manager yesterday. But to my notice i haven't done any changes. But still i am not able find any reason for the wireless network not to work. When i try to restart the network servies it gives the following msg.
Quote:
Bringing up interface eth0:
This version of ISC DHCP is based on the release available on ftp.isc.org. Features have been added and other changes have been made to the base software release in order to make it work better with this distribution.
Please report for this software via the Red Hat Bugzilla site: [url]
Did i do something wrong with the network manager or did something go wrong with fedora.
pulled the wireless USB adapter out of the back of my laptop when I was using it. I plugged it back in and it can see my wireless network, but it can't connect. Everytime it tries, it just shows the connecting icon on the top bar for a few minutes and then says that the network has been disconnected.
I've tried uninstalling and reinstalling the USB adaptor, but nothing I've done seems able to fix the issue. Anyone know how to fix this?
The USB adaptor I'm using is a Trendnet TEW-424UB
I have had ubuntu about a month now and everything has worked great up until now, I was surfing the web and all the sudden I lost connection. I tried to connect to the signal but got nothing so I did a reboot. After the reboot my wireless signal didn't show up. i right clicked the connection icon on the top taskbar and the enable wireless is blacked out to where i cant click it.
View 7 Replies View RelatedJust recently the wireless stopped working on Ubuntu 10.04. The machine is AcerOne AOA-150. I did notice recently the wireless would stop working, and I would need to either 1) reboot 2) switch the wireless off by moving the switch from left to right in front of the laptop.
However, this time nothing is working. I've provided some detail and if more information is needed, let me know.
LSPCI:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
[Code]....
My wireless mouse stopped working about a week after i bought it. i replaced the batteries, and tried restarting my computer. I also tried putting the receiver in all of the other usb ports, to no avail. Where is the driver software that was installed when the receiver was plugged in located on my computer? I plan to un-install this and hope that it works when it is installed again.
View 1 Replies View RelatedA couple days ago I booted up my Ubuntu 10.10 machine as usual,but the wired LAN connection did not work; it doesn't seem to see any wired connection devices. I can still connect to a wireless network with no problem, and if I plug that same ethernetable into another machine it works fine. I've been happily using this setup for weeks; the LAN only stopped working a day or two ago. So I figure there's two possibilities:A recent update caused NetworkManager to stop working with wired LAN connections, but I'm e only persothed affected (unlikely)My motherboard's ethernet port died (this motherboard only a couple weeks old, so this also seems unlikely)I'm not good at diagnosing problems with networking, so who can tell me where to st
View 9 Replies View RelatedYesterday I installed many updates on my compaq presario cq60-214dx running ubuntu 11.04.
This morning my 2 year old son was pressing buttons, generally playing with the notebook. When he was done the wireless stopped working. I cannot get it to come back on. What could he have possibly done without entering the password.
I have restarted several times. ifconfig does not show the wireless adapter. iwconfig says its not active. i turned on txpower using iwconfig but still nothing.
Kuser no longer works for 'rob' but still works for 'robert' & 'root'. It launches (i.e. the cursor bounces up & down and a Kuser box appears in the task bar) but the Kuser screen never opens. Finally, the bouncing cursor disappears as well as the Kuser box in the task bar.
View 1 Replies View RelatedI have had my computer set to dual boot Windows 7 for months now with no issue. Now today when I logged on to Slackware (13.1 x86_64) it suddenly stopped recognizing that my Windows 7 drive has anything on it. Fdisk cannot see any partitions anymore. Yet I can reboot the computer and run Windows 7 off it just fine. The windows drive should be /dev/sdb with sdb1 being its system reserved partition and sdb2 being the actual Windows partition.
Dmesg sees that it is there like my other drives, but it appears that the Windows 7 partition is not unaccessable to anything in Linux.
How could this work yesterday yet today it doesn't? I didn't change anything.
I haven't used my VB for a few weeks however all of a sudden it refuses to work for my normal non-root user. It's almost as if it can't find libraries in the /opt/VirtualBox directory. Initially it refused to start completely so I linked the required libs into /usr/lib64 ( yip real hack. Then it started but a vm would not start, and comes up with an error about a missing lib again which is definitely there. My non-root user is in the vb group and nothing besides system updates has changed. vb 3.2.10 slack64-current.
View 14 Replies View RelatedBooting up this morning, no problem. But I accidentally let my laptop go into suspend mode, which doesn't work, so I had to force a restart (Suspend mode on my laptop won't allow me to wake it up again). Now, on rebooting, X doesn't work. I usually boot to RL3 then use startx. Now it just flashes the screen then gives me this error -
Code:
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices .....
Fatal server error:
Failed to activate core devices.
Please consult the The X.Org Foundation support at [URL] for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. If I su - to root and then do "init 4", I get to xdm, and I can log in. X then starts, but with no sound, wrong keymaps, launchers not working; all sorts of things wrong. If I startx as root I get a normal desktop. I have tried copying root's xinitrc to /home/spoovy, but makes no difference.
