I have a homemade box with the following specs: 512MB memory
600 (or so) MHz AMD Duron processer
A SCSI controller (DPT something)
On it, I have:
7-disc CD changer
some CD-RW burner
ATI Rage 128 Video card
[Code]...
Computer: Toshiba Satellite Pro L510 laptop, 10.10.This has always happened but I have gotten around it by time-out and putting my menu.list in order. When I first boot the machine (switch on for the day from computer being off) I get to the grub options to select a kernel and I have no keyboard. No up/down arrows so have to go with the kernel on top of the list (not always desirable).
When I get to the log-in screen if I hit restart and go back to the grub screen I have a keyboard and can select any kernel. If I login to the kernel I have full keyboard, no problem. If I then restart, I have keyboard at the grub list.
Nutshell: It is only when starting the computer fresh that the keyboard is dead at grub menu (and then only). Any time after that, once the computer has been switched on, if I restart I have keyboard at grub menu and can select different kernels. (Of course, if I switch the computer off and back on again, no keyboard ...)
is it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
I was unaware of the difficulties of installing and booting Ubuntu from the "onboard raid" that the NVIDIA nForce chipsets provide. However, I've managed to get it working reliably with one single caveat:
When update-grub builds the grub.cfg, it refers to all of my partitions as follows:
Code:
menuentry 'Ubuntu, with Linux 2.6.35-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(/dev/mapper/nvidia_caifaefg,msdos5)'
[Code]...
So I'm guessing that the whole nvidia_blah,msdos5 is because of that. However, it doesn't seem to explain why Grub would THINK that would work and it in fact does not work. That's the biggest source of confusion on my part.
My questions are as follows: First off, because as an IT person I want to know: Why does this sort of change work? What does changing that device name change in GRUB's behavior? Is there a setting in /etc/default/grub that would change the way it's naming these RAID devices? Is there a value for this setting that would give me the device names that work, as explained above?
If there is no setting change I can make in /etc/default/grub, could I add a sed command on to the end of update-grub or can I make a modification to one of the scripts in /etc/grub.d? What sort of change would be recommended? How would I preserve this change through later package upgrades that would possibly rewrite these files?
I just formatted the partition that contains fedora 15 using windows.. Now when I attempt to boot my PC the grub bootloader comes up and I cannot boot anything.... The error that I get|| i feel i need a boot command to boot boot win7 from grub... grub propmts me " minimal bash-like line editing is supported. for the first word tab possible list a possible commands completion anywhere else tab list
View 1 Replies View RelatedI've tried Ubuntu awhile ago. I popped the CD then restarted my Mac. Upon restarting I usually pressed the C key. The system boots to the Ubuntu CD but when I get to the language selection thing, I cannot use my keyboard. I had to snag my PC's keyboard from the other room to make it pass through the said window.
Is it normal? I selected the "Try Ubuntu" first to get my feet wet.
I have a working server running CentOS 5.5 (similar to RedHat EL) with the 2.6.18-194.el5 kernel. The hardware is a few years old, but we were able to accomplish this following goal using CentOS 4.4. What I'm trying to do is to back the system up to an external USB hard drive such that it can be booted from for recovery or to then take that drive and restore its contents to a second server with identical hardware. We have been successful implementing this on other server pairs, but I'm having a great deal of trouble getting this to work on this hardware and OS. I'm not using LVM or dual-booting with another OS. The USB drive is set up with identical partitions to the RAID set, and all the files have been successfully copied over, but I can't get the system to boot from it. Below is what I get when trying to boot from the USB drive:
Code:
Booting 'CentOS (2.6.18-194.el5)'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz-2.6.18-194.el5 ro root=LABEL=/
[Code]...
How can I run a Debain ISO from a USB using GRUB4DOS like Boot Multiple ISO from USB (MultiBoot USB)? This way I can keep several install disks on one USB key.
This entry didn't work:
title Debian live
find --set-root /debian-504-amd64-CD-1.iso
map /debian-504-amd64-CD-1.iso (0xff)
map --hook
[code]....
I have tried and failed to install F14 and 15 on my system for a while now and I have been running Ubuntu in the mean time as it installs and runs fine as does Mint, and Suze.
My Pc is getting a little old now but is still very capable, however the Primary master Sata port seems to have a fault on it so I don't use that anymore as it ends up corrupting my hard drive after a few weeks.
I am running one hard disk on the secondary sata port which shows up as the primary slave in Bios.
When I install F14 or 15 all goes well till I restart then it boots to Grub with no errors.
I have tried assigning root in grub and it doesn't seem to think any hard disk exists from what I have tried, what am I missing?
Just to confirm I am running one hard disk on the second SATA port, Fedora detected it on install as sda1, and the rest of the linux partition as sda2.
I have tried this multiple times and the grub was installed to the MBR
I just install ubuntu Linux fully on my computer. Now i then install Grub-EFI, and EFI amd64. I also blessed my Linux partition. Now did i install everything to boot grub EFI? if i did. how do i know im booting using Grub EFI and not GRUB?
View 4 Replies View RelatedI was installing fedora 13 just for fun and it move grub boot to different partition. Now I can't boot anything but fedora I know I need to be booting from hd0 sa1 but grub loads from hd0 sa7 .I just need my ubuntu os back .
View 2 Replies View RelatedSince this morning my system refuses to boot Ubuntu 9.04 installed in Vista using Wubi.It has been working for months, but now it fails to start. I get to the windows bootloader screen. When booting Ubuntu (pre-selected) it goes straight to GRUB. Performed test several times: it is consistent.
View 7 Replies View RelatedAbout a week ago my netbook (Samsung N220) stopped booting, after been working fine since installing it 4 months ago - not aware of any changes, though some updates may have been applied. It is not getting to the grub menu and instead just getting a flashing cursor in the top left corner of the screen. Booting fine from a USB, and the bootinfo results.txt is:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb
sda1: _________________________________________________________________________
File system: ntfs
[Code]...
Not sure if this is the exact right spot for this post, I've got an .ISO file of windows 7, but no DVD's to burn it to. I've read that I should be able to use GRUB to boot, but I can't exactly get it to work. I've been poking around the map function trying to sort of mount the iso somewhere within the hard drive, but I'm not sure if that's how it should be done.
View 3 Replies View RelatedI installed Ubuntu on w7 using Wubi and I set in w7 that it on startup automatically boots Grub without asking. Now when I am in Grub and when I select Windows 7 (loader) it goes black and returns to Grub so I cant boot w7 at all.
View 4 Replies View RelatedI work in a very restrictive environment and I want to use linux on my work laptop (currently running Windows XP prof). I am planning to install linux in a dual boot mode but I dont want to install grub/lilo or any other boot loader. i cannot even modify Windows bootloader to boot into linux partition.
Is there a way I can boot into linux partition without installing new boot loader or modifying the current windows boot loader? Any boot CD etc available that can boot into linux partition from my laptops HDD?
I recently installed Ubuntu 9.10 and when i rebooted, GRUB fails to boot to windows. What exactly happens is that when i select Windows, it simply goes to a black screen with GRUB at the top, and a blinking cursor (that accepts no input) Summary:I am running Windows XP Professional No, i do not have the Windows disk My hard-drive has been partitioned between Ubuntu and Windows I have Ubuntu 9.10, which boots normally Windows failes to boot, and hangs on a screen that says GRUB _ I am a total linux noob I dont want to simply rewrite the mbr as i still want to be able to dual boot. I have important data on the windows partition that i want to keep.If you want any logs/info, you'll have to tell me EXACLY how to view/capture them
View 6 Replies View RelatedI am trying to boot linux kernel from a USB stick. I performed following steps:
1. wrote Grub stag1 to MBR of USB with this command on my linux host.
dd if=/boot/grub/stage1 of=/dev/sdb1 bs=512 count=1
2. Mounted the USB and I copied the following files in my USB.
boot/grub/stage1
boot/grub/stage2
3. Plugged in the USB in the the target machine. Rebooted and changed the booting sequence to boot from USB
My problem is that instead of getting a boot prompt, iIam getting GRUB GRUB GRUB all over the display. I googled out for it and found that if we change the auto-detection oh HDD in bios to manual that may solve the issue, but that did not help. If you happen to know that I am following the correct steps and in right order please point me how can I resolve this issue of GRUB.
I would like to know if what I am thinking is possible and, if so how to set it up. I have a Compaq Workstation that I have loaded on it VMWare ESX 3.5 and FreeBSD. I have successfully edited the grub menu.lst file to boot into either, but i would like to select my choice from another machine running Win7 using Putty ( Since I only have one monitor and keyboard!
Once my workstation loads the grub, presenting the options of OS's, is there a way using putty or some other software GUI on my Win7 machine to see that grub menu and then select which OS the workstation should boot into? ( ESX 3.5 or FreeBSD - This would come in handy so I dont have to disconnect my monitor, keyboard and mouse each time just to select the desired OS!!!)
i installed Rhel5 as dual boot with windows.after installation it worked nicely.i forgot to eject the installation dvd of rhel5 from the cdrom.while rebooting the installation menu appeared. so rebooted and eject the dvd.The problem is the GRUB loader not showing the boot menu(windows or Redhat).it shows grub>what sould i have to do, to boot
View 2 Replies View RelatedMy working OS uses grub, but I've just installed Sabayon 5.5, which uses grub2, on hda10. I want to keep using grub until I've got time to RTFM on grub2, so I installed the Sabayon bootloader on hda10. I should be able to point grub at the partition and boot indirectly, as with Windows, but after following the grub 'info' page I get an error message. Can anyone point to the error in the following grub script:
title hda10 110330 Sabayon 5.5
rootnoverify (hd0,9)
makeactive
chainloader +1
[Code]...
I have a multiboot system chainloaded by SUSE grub. I have installed CENTOS on an extended partition thrice with various grub install options available in install media. I am unable to chainload CentOS with SUSE grub or PCLinuxOS grub.
Here is my menu.lst -
# Modified by YaST2. Last modification on Mon Sep 20 05:43:13 SGT 2010
# THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
# Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
default 0
[Code]....
How do I get CentOS to boot from openSUSE 11.2-11.3 grub.
First happened after the installation of VirtualBox OSE. Freezes right afterStarting GNOME Display Manager: gdm3and, in one instance, on the following line. Doesn't accept input and the cursor stops blinking on either state. VirtualBox's drivers are one of the closest lines to the last one and, in one instance, one of these lines reported an error. I can boot recovery mode and have already removed VirtualBox. Given it was installed with a live netinst CD image (on a USB stick) and I have a history of bad installations with this image, I'll try to install the normal CD image, although this will take some time.
Specs:
HP Mini 110-3110BR
Intel Atom N455 (1,66 GHz)
160 GB (5400 RPM) HD
1 GB DDR2 SDRAM (1 Dimm)
3 USB ports
1 SD/MMC port
No CD/DVD drive
Latest Debian
I have been mucking around with Linux on and off for a while now, but this is the first time I have used a Debian distro. I have to say, it's been a pleasurable experience with it all going easily from install to now. I installed it to my external WD 1tb drive. It worked first up not a worry in the world. I have 2 internal drives also and when the installation of Debian was finished I had a GRUB with all operating systems duly noted. I was able to choose at start up between my Windoze 7 on HD0 and my PCLOS on HD1 and my Debian on HD2. (sda, sdb, sdc).
I noticed today as I was booting into Debian that the Windoze option was gone from the GRUB. I thought I'd put my trusty GRUB disc in, reboot and have the issue sorted in no time, as I have in the past. No such luck. After trying almost every option on the super grub disc I have a list of errors, 15 file not found, error 6 mismatched, error17 can not mount and error 12 invalid device. The only thing I can crank up now is windoze and whilst I have had a pretty good experience with win 7, I would like to have the option of choosing between the 3.
I am using Debian Squeeze, having installed it after Windows 7, each on a separate HD.
What happened was that Win7 became unbootable and, after failing to recover it, decided to live without it.
After a (happy) week of Windows-free life, I'm wondering if I can safely remove GRUB ("Grub-pc" and "Grub-common" are installed) since, as far as I know, GRUB is there only to boot/load more than one OS?
When I netinstall debian squeeze an asus netbook using using Unetbootin usb stick, at the end I am asked if I want to install grub on MBR. I agree, yes, but on booting I find that the netbook has not grub. I go back to usb stick that stole my grub and I use it to boot. I go to sunaptic and install grub, still nothing, the netbook won't boot without the usb stick.
View 2 Replies View RelatedI have recently (today) installed Debian on a logical partition of my master hard disk, but when booting it will just list Debian or Debian recovery not listing windows at all. I know there may be some that will think that is a good thing but I do need access to windows.
I had a root about and found this thread which I thought might solve the problem as it is similar:
viewtopic.php?f=17&t=63601
But when I got to the part where I entered the command su -c "nano /boot/grub/grub.cfg" the terminal prompt changed to a > and I felt a little unsure of what I was doing as I would have prefered to have opened the grub.cfg file as a text file, as it is I recieved a syntax error.
As you can probably tell Linux to me appears to be a bit of a black art, but I am enthusiastic none the less. I will list the output of the terminal window so that you may see the steps I have taken.
anthony@Debian:~$ su -c "grub-mkconfig"
Password:
Generating grub.cfg ...
#
# DO NOT EDIT THIS FILE
#
[Code].....
What is the configuration issue in the other-than-Fedora-11 stanza below that prevents that OS from booting? That stanza is taken directly from the /boot/grub/menu.lst of that OS, whose root partition is on sda5. All I get upon choosing the menu entry is a blinking cursor and a steady HD light. obsessing over this for a couple of weeks, reading what I can find about grub configuration but without joy.
Here is /boot/grub/grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that
# all kernel and initrd paths are relative to /, eg.
[Code]......
I recently installed Fedora as dual boot with XP on my netbook, but then decided to uninstall it again. I probably did it in the wrong way because everything is messed up. I installed Fedora in a separate partition, so I just deleted that partition. Now when I rebooted my netbook, it starts GRUB.
I get some sort of command prompt like cmd.
grub> {here I can type commands}
I tried several stuff to get everything normal again. First I made a bootable USB which starts the XP Recovery console. Then I used these commands :
Code:
fixboot
fixmbr
I reboot, and there it is again ... the GRUB. How can I get Windows XP working again? I didn't touch the C: boot partition, so the XP installation should still be intact.
I am shortly getting a new computer, It will arrive with Windows 7 on one disk and will have a second disk, on which I will install Fedora. In the past, when I've set up a dual boot system, I always used the standard configuration with the first part of grub put in the MBR. But this time I would like to put grub entirely in the Linux disk and then use Windows 7's boot loader to boot. I set up another computer that way where the disk originally came with Vista. But in that case, I set it up the standard way and then changed it afterwards to use the Vista boot loader.
This time, I want to set it up when installing Linux so grub is entirely on the second Linux disk. So until I manage to figure out how to get the Windows boot loader to do the job, I need a separate way to boot Linux, say from a CD with grub on it. But that CD should have the appropriate grub configuration on it. The easiest way I know to create such a CD is from Fedora, but there is the problem that I first need to get into Fedora to do it. I can think of several ways to approach that problem, i.e., using the installation disc in rescue mode or using some raw grub booter created from my old system. But I would like to keep things as simple and direct as possible, since otherwise I'm sure there will be false starts and a lot of fiddling.
So could someone direct me to some simple instructions to do what I want as quickly as possible. In particular, are there any options to do it in the installation process?