When I netinstall debian squeeze an asus netbook using using Unetbootin usb stick, at the end I am asked if I want to install grub on MBR. I agree, yes, but on booting I find that the netbook has not grub. I go back to usb stick that stole my grub and I use it to boot. I go to sunaptic and install grub, still nothing, the netbook won't boot without the usb stick.
i have lucid lnyx installed as my main system and added natty on a seperate drive. after installing, the new grub detected lynx & i was able to boot into each without any problem. after doing some tweaking on natty (changed run level), it didn't boot properly so i reverted to the old config via rescue disk. after rebooting, the old grub menu didn't show & it loaded lynx automatically.
i tried the suggestion from another post changed the hidden menu and updated grub but it didn't detect natty (below).
------ update-grub ------ Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-31-generic Found initrd image: /boot/initrd.img-2.6.32-31-generic Found linux image: /boot/vmlinuz-2.6.32-30-generic
So here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
How can I run a Debain ISO from a USB using GRUB4DOS like Boot Multiple ISO from USB (MultiBoot USB)? This way I can keep several install disks on one USB key.
This entry didn't work:
title Debian live find --set-root /debian-504-amd64-CD-1.iso map /debian-504-amd64-CD-1.iso (0xff) map --hook
First happened after the installation of VirtualBox OSE. Freezes right afterStarting GNOME Display Manager: gdm3and, in one instance, on the following line. Doesn't accept input and the cursor stops blinking on either state. VirtualBox's drivers are one of the closest lines to the last one and, in one instance, one of these lines reported an error. I can boot recovery mode and have already removed VirtualBox. Given it was installed with a live netinst CD image (on a USB stick) and I have a history of bad installations with this image, I'll try to install the normal CD image, although this will take some time.
Specs: HP Mini 110-3110BR Intel Atom N455 (1,66 GHz) 160 GB (5400 RPM) HD 1 GB DDR2 SDRAM (1 Dimm) 3 USB ports 1 SD/MMC port No CD/DVD drive Latest Debian
I have been mucking around with Linux on and off for a while now, but this is the first time I have used a Debian distro. I have to say, it's been a pleasurable experience with it all going easily from install to now. I installed it to my external WD 1tb drive. It worked first up not a worry in the world. I have 2 internal drives also and when the installation of Debian was finished I had a GRUB with all operating systems duly noted. I was able to choose at start up between my Windoze 7 on HD0 and my PCLOS on HD1 and my Debian on HD2. (sda, sdb, sdc).
I noticed today as I was booting into Debian that the Windoze option was gone from the GRUB. I thought I'd put my trusty GRUB disc in, reboot and have the issue sorted in no time, as I have in the past. No such luck. After trying almost every option on the super grub disc I have a list of errors, 15 file not found, error 6 mismatched, error17 can not mount and error 12 invalid device. The only thing I can crank up now is windoze and whilst I have had a pretty good experience with win 7, I would like to have the option of choosing between the 3.
I am using Debian Squeeze, having installed it after Windows 7, each on a separate HD.
What happened was that Win7 became unbootable and, after failing to recover it, decided to live without it.
After a (happy) week of Windows-free life, I'm wondering if I can safely remove GRUB ("Grub-pc" and "Grub-common" are installed) since, as far as I know, GRUB is there only to boot/load more than one OS?
I have recently (today) installed Debian on a logical partition of my master hard disk, but when booting it will just list Debian or Debian recovery not listing windows at all. I know there may be some that will think that is a good thing but I do need access to windows.
I had a root about and found this thread which I thought might solve the problem as it is similar:
viewtopic.php?f=17&t=63601
But when I got to the part where I entered the command su -c "nano /boot/grub/grub.cfg" the terminal prompt changed to a > and I felt a little unsure of what I was doing as I would have prefered to have opened the grub.cfg file as a text file, as it is I recieved a syntax error.
As you can probably tell Linux to me appears to be a bit of a black art, but I am enthusiastic none the less. I will list the output of the terminal window so that you may see the steps I have taken.
anthony@Debian:~$ su -c "grub-mkconfig" Password: Generating grub.cfg ... # # DO NOT EDIT THIS FILE #
Recently I installed Debuan "jessie". I previously had Windows 8.1 and Xubuntu installed. After installation Debian installed it's own version of GRUB, with entries for Debian, Xubuntu and Windows. The problem is that after I selected Windows when booting, GRUB menu no longer appears. It boots straight into Windows.
It's lenovo Ideapad z510 laptop, with special button that allows me to select between 4 options before booting - one of them is "Boot menu".
I didn't use it before windows "removed" GRUB, but now there are 2 options: Windows boot loader and Ubuntu. When I select Ubuntu it loads my old boot menu (from before installing Debian).
I thought that when I use update-grub from Xubuntu I will at least eb able to boot into debian. After I did that Debian option appeared in the GRUB menu, but it didn't work - black screen.
How to get GRUB menu working again (and avoid replacing it by windows boot loader)?
I recently did a single boot install of Lenny-xfce on a Compaq Armada laptop. There were no errors and grub indeed found that Lenny was the only OS on the hard drive and installed itself on the MBR. My problem is that I'm getting an error 18 when booting the freshly installed system from hard disk. I booted into rescue mode and started a shell to take a look around. There are files on the drive and /etc/grub exists. device.map shows dev(0,0) as being mapped to /dev/hda. A search on the forum for "grub error 18" came up with nothing.
I recently installed another Linux distro, Kali Linux, alongside my Debian 8 and discovered to my chagrin that my computer boots to Kali's grub rather than to the Debian grub. I had spent some time customizing Debian's grub and would hate to see that effort go to waste. Is there a way I can get my computer to boot to Debian's grub instead? I tried deleting Kali's boot partition with gparted but that did not seem to do anything.
I'm not sure of what is going on here, I might be missing something obvious, but anyway my fresh netinstall of Testing doesn't boot without the USB stick that I installed from plugged in. When USB plugged in it boots without problems.
Every single theme has at least one or more broken UI element. In Arc, I'm missing highlighting in the context menu, and in Numix, some application's backgrounds are just completely black. All of these themes don't give me a urlbar. I'm also missing a lot of boxes. There is no box around the word "submit" in reddit, and neither around "cancel". If you go into the search bar, I'm missing the checkbox for "limit my search to /r/...". I know these themes work, because I had them working in my last install of Debian. Except, last time I used the XFCE iso instead of the netinst. Even default themes, like Raleigh, are not working correctly. I installed all the necessary packages like the gtk2 murrine engine, but if the default themes aren't working then something is definitely missing.
I'm trying to manually boot (from the GRUB console) into a system set up as follows: crypt partition -> LVM -> root LV, and I'm having some trouble figuring out how to do this from the GRUB console.
I have successfully manually booted a system which is set up as just LVM -> VG -> root LV. All I have to do is load the LVM module. In GRUB, that partition shows up as (hd0,gpt5). Once I load the GRUB LVM module, I can see the logical volume within the LVM as well. (My volume group name is "caesar", and the single logical volume is named "root".)
Code: Select allgrub> ls ... (hd0,gpt5) ... grub> insmod lvm grub> ls ... (lvm/caesar-root) ...
It's fairly simple to manually boot:
Code: Select allgrub> set root=(lvm/caesar-root) grub> linux /vmlinuz root=/dev/mapper/caesar-root grub> initrd /initrd.img grub> boot
Where I am having difficulty is in trying to insert crypt before LVM. I can set up such a scheme, and put a minimal installation on it, without issues. It's booting into it upon reboot that I can't figure out. Once I load the GRUB crypto, cryptodisk and luks modules, I can mount the crypto partition:
Attempting to decrypt master key... Enter passphrase for hd0,gpt5 (<long hex string here>): <type my password> Slot 0 opened grub> ls ... (crypto0) ...
At this point, GRUB sees the crypto partition as (crypto0). But the GRUB LVM module doesn't see "inside" of the crypto partition, so I don't see the root logical volume within the LVM listed; all I see is (crypto0).
Code: Select allgrub> insmod lvm grub> ls ... (crypt0) ...
Setting it as root doesn't work:
Code: Select allgrub> set root=(crypto0) grub> ls / error: disk `crypto0' not found.
So, How do I get GRUB to "see" LVM inside the crypto partition?
I would really like to try and do a Netinstall on my laptop with it. I know I could just download the CD's/a DVD, but I would rather customize it for my laptop, and I've heard that's the fastest way. The problem is that I have to compile the drivers for both my wireless and my wired internet. I have guides to compile both the wireless [URL] and wired [URL] internet. I was wondering if there was a way to compile these drivers in a Netinstall (preferably the wireless, but wired if necessary)?
I am trying to install Squeeze on a HP mini netbook. I have been trying to make a USB to netinstall Squeeze and cannot get it right. I cannot get past the message SYSLINUX 4.02 debian-2010.............. on booting.
I have tried to make the netinstall usb from this [URL] dInstaller I am also trying to understand this [URL] I have also tried using Unetbootin. Nothing works so far. Some simple steps to make a workable USB.
I have internet connection - you need to open a browser & in the login screen enter your user name & password to get connected. The connection is via a ethernet cable. I have the netinstall cd for debian testing. How to connect to internet & get debian testing installed.
I'm hoping to install XFCE 4.8 after a fresh install of Debian via the netinstall. Do I just change the source.list file to point to testing and then install xfce4?
I figured I'd rather do a netinstall for Debian, but it cannot find my network card. This has been the issue for Ubuntu as well. I did find this, but I haven't installed Debian yet: [URL] .... Not to mention it's 5 years old, and the links are obviously dead. I'm somewhat inexperienced with Linux in general, and I've searched for incorporating driver modules into the install but couldn't figure it out.
Where can I find the driver, and how can I incorporate it into the install? I wanted to do the netinstall to have Debian as minimal as possible.
I installed Squeeze on a server today, and struggled a bit because the network card needed non-free firmware (Broadcom something). The server had no floppy, so I had to go and get a pen drive and put firmware from non-free on it to get it to work.
I agree on the political issues on this, but sometimes it's non-free or nothing.
So I was wondering if someone know of a patched netinstall, or know how to make one? Then I could give the pen drive away to something more useful that keeping non-free firmware. Warnings and questions about the non-free would also be nice.
Debian if my first OS and i want to dual boot Fedora12.Ok i installed Fedora12 and choose not to install the bootloader(gonna use the one Debian installed)What i'm tring to do in Debain is edit my /boot/grub/menu.lst Here is what i have
I downloaded and installed the debian 8 ppc netinstall on my powerbook G4. upon the option of which desktop environment I wanted, I de-selected debian desktop environment (I only selected printer and utilities.) After finishing the install I am prompted with terminal. I logged in and did the following:
Code: Select allnano /etc/apt/sources.list
to include
Code: Select alldeb http://ftp.us.debian.org/debian jessie main contrib non-free deb-src http://ftp.us.debian.org/debian jessie main contrib non-free deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free
I tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?
I installed the Squeeze with CD-ROM netinstall. My /home is in /dev/hda6, reiserfs format, and I want to preserve it, I didn't make backup, and there is not the reiserfs option in the partition editor of the netinstall, so that it would be formated the home, otherwise it is not used as home, and I can not even mount it. I try to edit /etc/fstab with the UUID of the device hda6 as home. I have just found reiserfs in http://packages.deb.at/squeeze/i386/rei ... i/download.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
i'm trying to intall an old etch debian release using the netinstall netinstall debian-40r9-i386-netinst.iso. But i've got an issue while configuring the miror. Here where i'm blocked (it seems my archive miror is not right but why ?): in the previous screen, i entered the right path (i think): and as you can see in my screen cap of the broswer, the website of the archive is right, so where am i go wrong ?:
It seems as though every time that I want to grab a multi-arch, netinstall ISO from the site (not very often) I have an insane amount of trouble navigating the site and finding what I want. I mean there's no freaking "downloads" section that is split into testing and stable with links to the mirrors and such. I want to grab a multi-arch netinstall of both Lenny 5.0.5 and the latest, frozen Squeeze. I cannot find either. In other words, I'd have to burn six CDs instead of two. Not happening. Can somebody point me to the images that I am seeking?