I've tried Ubuntu awhile ago. I popped the CD then restarted my Mac. Upon restarting I usually pressed the C key. The system boots to the Ubuntu CD but when I get to the language selection thing, I cannot use my keyboard. I had to snag my PC's keyboard from the other room to make it pass through the said window.
Is it normal? I selected the "Try Ubuntu" first to get my feet wet.
Neither Ubuntu's Unity or KDE respond to the function keys on a regular Apple USB keyboard. I can plug in a non-Apple keyboard and they work just fine. What needs to be changed or configure so that F1 and company on the Apple keyboard work as on other keyboards?
View 1 Replies View RelatedThis morning I bought an Apple wireless keyboard and I got it connected through Blueman. It works like a charm, but I have on problem;
When I log out I can log back in by typing in my password. However, when I restart the computer it seems that bluetooth is not loaded yet and I cannot enter my password. So I have to log in using my wired keyboard, and then disconnect & re-connect to my wireless keyboard using blueman before I am able to use the wireless keyboard.
Is there any way that I can already auto-load bluetooth and connect to my keyboard before I log in?
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
[code]...
I had a thread about installing on a Mac and decided to go the VirtualBox route and everything is running splendidly EXCEPT for the fnmode setting in /sys/module/hid_apple.
The problem is that the directory hid_apple does not exist for me to modify the settings for the apple keyboard. I'm assuming that when installing in VB, Ubu assumed it was a PC. Anyone know of a way to get the keyboard config directories in there so I don't have to hit Fn to do Alt-F2? Also, I tried to create the directory (sudo mkdir) and it returned "Cannot create directory...no such file or directory", but not in so many words.
Doing some experimentation with the XP Home BootCamp on my MacBook, I installed Wubi. (Yes, installed Wubi, on a BootCamp partition, on a Mac). Amazingly, it works flawlessly! But I thought up something while considering the issues with booting from USB on a Mac. My theory is this: Its the EFI and the Firmware which has compatibility issues with booting from USB. But when running BootCamp to use a Windows Partition, it emulates BIOS, which nowadays is good with booting from USB..
So, If I select to boot from Windows, which then leads to another selection asking for Ubuntu (GRUB) or Windows, you could select Ubuntu, which chucks you up at the standard version of GRUB, which to my understanding does support from USB booting? Select your stick and your off. If somebody would be willing to try this theory or correct me, maybe you could think up some easier way in which to boot from a USB with a Mac.
I just install ubuntu Linux fully on my computer. Now i then install Grub-EFI, and EFI amd64. I also blessed my Linux partition. Now did i install everything to boot grub EFI? if i did. how do i know im booting using Grub EFI and not GRUB?
View 4 Replies View Relatedafter loading kernel we get /pci@f0000000/mac-io@17/ata-4@1f000/disk@0:3,/boot/vmlinux : input/output
Every install does this.
What is it with PPC ubuntu lately? Starting with 9.04 it has been nothing but snake bit. And is there any other mirrors beside britain for PPC it seem frequently unavailble or slow.
I just installed the latest version of Ubuntu on my intel-based iMac with OSX 10.6 (Snow Leopard), but I don't know how to bring it up.
I partinioned my hard drive for it. I inserted the CD and pressed C when restarting my computer for it to come up, then I installed it on the partition. It was done installing and said the computer must restart now, so I pressed OK. I got a black screen with a bunch of white text saying something about an error. It was pretty much "frozen" (I didn't know how to get off the screen), so I turned off the power manually by pressing the power button. I turned the power back on, but I get no option for Linux. I tried putting the CD back in, and it boots from the CD but it's still the non-installed version. So I thought maybe it didn't install, so I pressed install again. It said to choose where to install it, but my partition of free space said Ubuntu was already installed on it.
I'm really confused and don't know how to get it to start up when I turn on my computer.
EDIT: Here's some more info about my mac incase you need it:
iMac
OSX 10.6 Snow Leopard
Intel
4 Gb of RAM
250 Gb hard drive (29 Gb partitioned for Linux)
I'm stuck with a problem trying to boot an Ubuntu Desktop 10.10 x64 CD into a white Macbook (2.1 gen, Core2Duo ) I've installed rEFIt, and synchronized GPT with MBR - all ok.
But when I insert the cd (works ok, the same CD on a DELL laptop ) and boot it via rEFIt, the computer hangs with this console message
Code:
1.
2.
Boot from Ubuntu CD-ROM:_
And I can't go further... anyone knows ?
I have an Intel iMac that has about 500 GB of unused space and I was wanting to install Ubuntu or Ubuntu studio or any Linux distro on about an extra 50 - 100 GB of space. I currently have the iMac with a windows bootcamp partition on it as well. Is it too late to partition the main partition and install Ubuntu on it without having to erase it and reinstall the Mac OS and Windows on it? Also, I wanted to try Ubuntu studio on a live CD, but when I hold C and bring up the preboot environment then I don't see an option to "try Ubuntu without changing anything".
View 2 Replies View RelatedI can get ubuntu to work fine on its own (except for sound, a problem for another day), but I can't get dual booting to work.I'm using this page as a guide:URl...I started out with a clean OSX snow leopard install. I ran bootcamp and shrank my 320G hfs+ file system to 160G. I installed rEFIt, and rebooted twice (you don't see the menu after rebooting once). Then I booted from my 10.04 CD, and deleted the partition created by bootcamp using gparted.When I run the installer and tell it to use the largest continuous space, it makes the / file system in partition #5, and the swap partition in partition #5.
I figured that might cause problems with a MBR partition table, so I partitioned manually, and set up / in sda3 and swap in sda4.When I tried to configure the installation of the bootloader, I had a menu of possible places to install it. I picked /dev/sda3, but then the OK button was grayed out.
I would like to triple boot my Macbook Pro. I don't want to use rEFIt. Although it worked on my iMac, it would randomly not load the OS's sometimes.
1. Is there a way to use Boot Camp?
2. I know how to use Mac with the windows xp bootloader. How can i put Ubuntu in too? I got this thing about taking 512 megabytes of the bootloader grub or something like that but I don't get it.
Machine: 2008 Mac ProKeyboard: Aluminum/wired/numeric keypad/US layoutKernel: 2.6.35-22-generic x64 (maverick)Bootloader: GRUB 1.99 BetaI have been trying to EFI boot Ubuntu since June - without success. My goal, for now, is to boot into an initramfs environment succesfully. I'm booting with these grub commands:
insmod efi_uga
linux (hd1,gpt1)/ubuntu/vmlinuz-2.6.35-22-generic video=efifb noefi
initrd (hd1,gpt1)/ubuntu/initramfs-2.6.35-22-generic
[code]....
I have been running ubuntu on my macbook for a while, and have been using a USB keyboard as the R F and V keys on my laptop are broken. In windows i had:
F5 > R
F6 > F
F7 > v
I would like to be able to keep the configuration - how would i go about doing this? BTW, graphical interface would be nice.
I have Ubuntu 10.04 (Netbook Remix) installed on Asus EeePC 1000. Sometimes I use Apple Wired Aluminum keyboard for comfortable typing. There is no problem for me with netbook's keyboard, but i want to change the keys for the Apple one. For example: make F1-F12 keys really work like F-keys, not control keys; make Fn key to work like Insert key, and swap Cmd/Alt keys.
So, the main question - is it possible to change the layout of apple keyboard without changing the behavior of netbook keyboard? If not, then maybe there are some "switchers" that can constantly change mappings from one to another and back? And, at last, if there is no such tools, then what is the easiest way to do it manually?
Drive will not read on the Mac after booting in Ubuntu!I haven't booted Ubuntu in months (October?), but no hardware changes except for the expresscard. Ubuntu runs nicely in a virtual machine from the Mac side, so I made a fresh VM with Karmic. Couldn't remember the cool apps I had running before (it's been a while), so I booted into Ubuntu to check it out. The HDD was connected and on. (Oops.)It was fine last night on the Mac. I did not notice if it mounted this morning (still in OSX, 10.6.2, Mac sleeping overnight and HDDs on for an unrelated backup). So there is a very slim possibility this has nothing to do with Ubuntu.
Back to Ubuntu, the other external (Firewire 800, HFS+) mounted as usual. Again, I cannot recall if the Fantom mounted. I have not installed drivers for the expresscard/eSATA in Ubuntu (separate driver install is required on the Mac a rarity). I scribbled down the names of the apps I was looking for, and rebooted the Mac to OSX. Where's my HD? Disk Utility sees it as unformatted, and oddly enough, SCSI. If I plug it in via USB, it simply sees an unformatted disk. eSATA is OK with another drive on the Mac.DiskWarrior failed to see the disk entirely with either connection, same in Leopard and even Tiger.Could Ubuntu have confused the partition maps or something? Any thoughts on how I might get it running before I give up and restore the backup?
After four attempts and diverse partition map problems, I finally managed to install successfully clean versions of both Mac OS X Snow Leopard and Ubuntu Lucid Lynx on my old MacBook Pro C2D (2,1) and a new 320 GB HDD, by following these instructions:[URL]
Now, I've got a big partition for Mac OS X (286 GB) and a small partition for Ubuntu (30 GB, as well as two smaller partitions for grub and swap). However, I'd like to shrink the Mac OS X partition to, say, 35 GB, and use the freed up 251 GB as a shared partition to keep files for access from both OSs. But Mac OS X Disk Utility won't let me resize the Mac OS X partition (and warns that it might not be a smart thing to do, as the disk has been partitioned for Boot Camp, etc).
Is there some way I can resize the partition, or do I have to start all over again?
when booting I can only acces a broken GRUB and this is how I might have done it wrong. I installed Ubuntu the first time using dual-booting which I think is the worst way since it could be done better by using a Virtual Machine such as Parralels or VMware. Well later I noticed that after removing Ubuntu there was still 2 problems 1.when selecting a OS during startup When I select "Windows" it goes to a broken GRUB which displays something like this " Use tab to complete the first commands" GRUB><where you're suppose to type> and I can't type so I hard reboot it. 2. I could not get rid of LinuxSwap. Much later I removed LinuxSwap by booting in a Ubuntu live disk and then removing the partition as well as the Linux "/" and after booting to Mac OS X leopard disk0s1 the Mac OS X system partition was mounted which was bad since it was suppose to be invisible to even the root user unless viewed by terminal on any user.
Now later I reformatted it as "Mac OS X something extended" and at first it was unjointed and impossible to mount and after I reformatted it it appeared as disk0s3. Now the problem appeared.This is the stuff I can do1. I can type some commands in the GRUB but when I typed find / the output is something like can't find /2. I might be able to boot up a live disk however my Linux Ubuntu live disk is broken.3. this is my dad's second hand Mac G5 iSight, not mine and it was a bargain, it was cheaper than my iPad with Mac OS X Leopard 10.5#
I've just tried installing Ubuntu 10.04 on my powerpc. It installed fine, and booted first time ok, but since restarting it just seems to boot into a black screen. My monitor says 'going to sleep mode'
I don't think it's hanging on anything, as I can hear sounds if I play around with the keyboard. Could this be something to do with the resolution being too high? If so, can anyone tell me how I go about changing this?
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like URL...
View 1 Replies View RelatedI've noticed that my field keys don't work on my iMac. The eject key works, but if I try ALT+F2 I get nothing. I there something I need to reconfigure to get my keyboard full functioning?
View 2 Replies View RelatedUsing VMWARE Fusion 3.01 on Macbook Pro 15", C2D 2.8Ghz, installed Ubuntu 10.04 on a virtual disc, no problems installing. boots up, offers me my mac username/password logon, but no keyboard entry registers, Cursor is in the password box, tried external PC keyboard, same lack of keyboard enry. So deleted Virtual disc.
View 7 Replies View RelatedI'm using an Apple bluetooth keyboard, model A1016 the one with a white bottom inside clear plastic. The machine is a Mac Mini (2,1) and I also have an Apple bluetooth mouse. The mouse works fine on Ubuntu 10.04. The keyboard has issues.
When I add the keyboard using the bluetooth applet, I find that I can't assign a specified PIN. I have to use automatic PIN, and then type the random number presented. That works until I reboot the machine.
After reboot the bluetooth applet menu shows both the mouse (connected) and the keyboard (not connected). If I tell it to connect the keyboard, nothing happens. The only thing I can do is delete the keyboard, re-add it, with a new random PIN.
Just upgraded to 10.04. Everything seems to still work on my Macbook, with a bonus being the buttons to modify the keyboard backlight brightness seem to work now.
However, the only caveat is that I can't seem to turn off the backlight. Pressing the dim button all the way to off just seems to reset to full brightness. Even if I set the brightness to 1 (almost off), the backlight seems to reset itself to full brightness at seemingly random times.
Running this command used to turn it off, but now doesn't work:
Code:
echo 0 | sudo tee -a /sys/class/leds/smc::kbd_backlight/brightness
Is this a bug? How do I turn off the keyboard backlight?
I set up my Mac Mini to dual boot Windows 7 and Ubuntu. I started with Windows only, and allowed it to rewrite the partition table (GPT/MBR). When I tried to install Ubuntu, it didn't see Windows until I used Gdisk to delete the GPT portion. Then it recognized the Windows partition and installed Ubuntu as per normal. Now when I boot, I get GRUB and the option to boot Ubuntu or Windows 7. The only problem is that the USB keyboard (Aluminum or standard PC keyboard) doesn't work until an OS is loaded.
Is this an EFI problem? I'm starting to think that EFI is required for USB keyboard support at bootup since it replaces the BIOS functionality. Is this even remotely accurate? Did I mess things up by not going the rEFIt route? I'm not sure what I can do at this juncture as I can only boot into Ubuntu.
I could install OS X, rEFIt, then Windows and Ubuntu, keeping rEFIt as the boot loader, but if there's an easy solution I'd like to avoid that. More importantly, I'd like to understand what's going on.
I think my computer must be haunted, as I've so far failed at 3 different ways of installing Maverick on my 2007 aluminium imac! I've written off using a VM, and I'm currently stuck trying to make a dual boot setup.
So I've followed the guide at [URL].. and got as far as rebooting with the CD in, and selecting Ubuntu, but then when everything loads I'm left at the screen where I can select try or install, with no way of selecting either as my mouse (apple bluetooth mighty mouse) and keyboard (apple bluetooth wireless aluminium keyboard) don't seem to be connected. I've got past this point by hitting random keys after booting and selecting the CD - this takes me into a more basic looking menu where the keyboard does still work and I can select install, try etc.
So I can get as far as selecting try, and get a working Ubuntu desktop. However, when the desktop loads, my keyboard and mouse are again not working. By connecting a USB keyboard and mouse, I'm able to get my mouse to pair, using the bluetooth menu and going through the setup. However, I'm stuck trying to get my keyboard to pair.
Going into set up new device and searching initially shows up my keyboard, then it disappears. If I wait it randomly comes back and disappears again. If I click on next whilst it is available, I can get as far as putting in a pin, but when I press enter it says Failed..
Sorry for the rambling post - I basically have 2 questions: 1- Is it expected that bluetooth keyboards and mice won't work during the installation menus? Half my problem is that I don't know what should be working and when (should I have to boot into the trial installation and setup the keyboard and mouse, or should it be set up automatically?).
2- Has anyone else seen the same problem with the apple wireless keyboard failing to pair? I've searched the forums and google, and found lots of people with problems with bluetooth keyboards, but none which seem to match what I'm seeing. I don't know if there's any point in pressing on with the installation using the USB keyboard and mouse in the hope that things will work in the full install, or if they don't work in the trial install then thats my lot.
I'm running a 13" white Macbook. The keyboard worked fine, until today. I logged in and half the keys didn't work, the other half were numbers not the letters they were supposed to be. This started after log in, meaning I was able to enter my password properly: The problem starts when gnome boots up.
By copy and pasting, I installed Kubuntu, where the keyboard also works properly, so this is clearly a gnome problem. I haven't ruled out malicious software, which seems like the next step: How do I verify and replace all the software (gnome) that might be corrupted?
I'm having a weird problem. I have a Apple Bluetooth keyboard, which used to work perfectly under Ubuntu. However, I decided to reinstall last week, and to my surprise the keyboard stopped working altogether. Also the gnome Bluetooth applet is crashing all the time. The weird thing is that I can use the keyboard to login, but after that it stops working altogether.
I'm running Ubuntu 10.10, it's up to date. Currently using a 2.6.37 kernel which I compiled myself, but the problem also appears when I run the 2.6.35 ubuntu kernel. There are some bug reports on the internet on crashing gnome applets, but as far as I can tell nobody has the weird keyboard problem.
I've finished integrating proper keyboard backlight support into gnome-power-manager (which in turn uses upower to actually control the keyboard backlight) which with any luck will be available in Natty out of the box. A similar patch should also land upstream too so Fedora etc should get it for free too in their next release too. In essence this allows us to provide the user with greater feedback and control than say just using pommed (ie. we can dim the keyboard on idle like the lcd display etc, and can display nice notifications of the keyboard backlight level too - see attached screenshot).
View 9 Replies View Related