Hardware :: SPDIF On DMX XFire Does Not Work?
Jan 26, 2011
I am a linux newbie; nethertheless I am trying to setup an old PC as jukebox using Debian. Unfortunately I can't get the SPDIF of the soundcard working (which works fine using windows). I tried a lot, spent the last evenings in the web to find an answer.. I will try to tell you what I tried so far, hardware and command outputs (aplay -l / -L) are at the bottom: For me it seems that the driver is installed correctly; with "aplay test.wav" I can hear sound with normal speakers and "aplay -L" shows the SPDIF device name (see bottom). But if I try to use it using "aplay -D iec958:CARD=CS46xx,DEV=0 test.wav":
[Code]...
View 1 Replies
ADVERTISEMENT
Dec 27, 2009
I have just bought a new PC with an ASUS M4A78-AM motherboard with integrated VT1708S 6-channel sound chip in it, so I freshly installed fedora 12 without any issues However, I can't get the surround sound working. I have searched many forums a lot, and haven't found any solution yet.It seems that even the SPDIF output does not work on this sound card, and that is what people talk about on almost every forum / mail list. So I was unable to find almost ANY information regarding ANALOG surround sound.
The motherboard has 3 jacks on it - green for FRONT / 2 speaker set; blue is the line in OR THE REAR-SPEAKER out, and pink is the microphone OR side speaker out in the 6-spk configuration.My speaker configuration is 4.1 [2 front, 2 back and subwoofer]. Line out does not produce any sound.I have uninstalled pulseaudio [sudo yum remove pulseaudio]Now alsamixer shows a lot of controls, but even if I unmute line out and set it to max, it is still not producing any sound.
View 14 Replies
View Related
Jan 23, 2010
I tried to run xfire with wine (yes, i installed it with wine also from the installer) , and it gave me an exception error (picture in attachments), how do i fix this?
View 1 Replies
View Related
Apr 18, 2011
Just installed 6.0.1 on my computer with a GA-H55N-USB3. It seems to have a Realtek ALC892 on it, and six 3.5mm jacks out and SPDIF too. I installed alsa and sound came from the 3.5mm jack, but I want SPDIF. I don't know what approach to make to enable it and that's the problem. SPDIF just have two modes in alsamixer, "00" or "MM" (muted). Master and PCM are set to 100. The SPDIF connecter is'nt even lit. How to enable it? I tried "alsactl init" and then rebooting, it made no difference.
[code]...
View 4 Replies
View Related
Dec 5, 2010
there is no errors in log, also the AV shows PCM input for all sound (pcm/ac3/dts and so on) but there is silence (trying with both pulseaudio and alsa). Everything works with kernel 2.6.35.6-48 and before. the problem exists at least for 2.6.35.9-64.fc14 and 2.6.36.1-11.fc15
my audio is
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889 Analog [ALC889 Analog]
[code]....
View 2 Replies
View Related
Nov 17, 2010
For months it was perfect. Simultaneous sound from both SPDIF and computer speakers. Today suddenly out of the blue no sound in SPDIF. If I click Test in KDE System Settings for SPDIF devivce that sound is played, so, I tried putting this device at the top, then sound comes only from SPDIF but not from the speakers!
God, why in Linux something perfect breaks into thousand pieces without any seemingly changes...
View 1 Replies
View Related
Nov 12, 2010
I am attempting to configure my HTPC with FC13. You can see my hardware configuration at the following link.The problem I am facing is trying to output surround audio using the spdif (optical) interface. The system correctly recognizes the integrated sound card (MCP78S High Definition Audio), but fails to offer the option of digital surround output. The only option for digital output is plain stereo. On the other hand it does offer all the analog surround output options.I have tried modifying the /etc/pulse/daemon.conf and specifying it to use 6 channels, but it still uses just 2. And for added grief, it sends one of the channels to the subwoffer instead of the front right channel.
View 3 Replies
View Related
Mar 27, 2010
I'm trying to get AC3/DTS passthrough working with my HTPC in which I'm using the onboard sound from an nForce 4-based motherboard. I've tested it in Win7 to check that all the connections etc are set up correctly and it works perfectly there. However under Kubuntu I can only get 2ch PCM sound to work through the SPDIF connection. Any DTS/DD sources just result in silence.If I go into Multimedia settings in the System Settings panel, the SPDIF device that shows up there (once I enable advanced devices) produces no sound with the Test button. I can hear a click as the device is activated but no sound is produced. I can also see that a digital signal is making it to my receiver as it has an icon which lights up when it locks onto a signal.Has anyone had success with SPDIF passthrough in 9.10? I've tried twiddling all the settings in Kmix relate to IEC and also tried following the Alsa wiki on digital passthrough without any success.
View 2 Replies
View Related
May 2, 2010
Using latest Ubuntu 10.04, the Creative Sound Blater X-Fi Titanium does not show (sound preferences) SPDIF (Digital).
Only Analog options are present.
While
Code:
alsamixer
shows S/PDIF with max volume... (IN and OUT)
Is there any alsa-base "options" to configure to see SPDIF in Sound-preferences?
View 9 Replies
View Related
May 9, 2011
I just did an install on a new partition to upgrade my htpc. I'm unable to get any sound over SPDIF working. I do not have a receiver that accepts HDMI so I need to use spdif That said, i was able to test the hdmi portion of the sound with my tv and that appears to be working fine.[URL]Below is just the list of aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
[code]....
View 4 Replies
View Related
Apr 17, 2010
I just installed Ubuntu Lucid beta 2 on my desktop, and I can't seem to get the sound to work. I have a Soundblaster Audigy 2 card and the motherboard has built-in sound, but ubuntu doesn't recognize either of them. The only hardware option I have in my sound preferences is for SPDIF, and thats the only thing that shows up in alsamixer as well.
View 1 Replies
View Related
Jun 4, 2010
Currently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies
View Related
Jun 8, 2010
I am looking to get a sound card to put in my HTPC that is running Ubuntu 10.04. I bought Auzentech x-plosion sound card that has spdif support but it does not work. Does anyone know of any card that will work or am I out of luck??
View 2 Replies
View Related
Aug 9, 2010
I am using the Creative X-Fi Surround sound card and a Samsung 5.1 Home Theater system. When I play back MP3s, or system sounds are played, the beginning of the audio is cut off. The nature of the cut-off is that audio fades in instead of just starting. It's only the fraction of a second, but whenever sound is played after a silence (i.e. also in songs that have short silent breaks, like Roxette's "The Look"), the beginning of the audio quickly fades in. So in "The Look", instead of playing
Na na na na na, na na na na na, na na na na na na she's got the look
It plays:
[%fade in]a na na na na, na na na na na, na na na na na na she's got the look
Any ideas what is causing this? I already turned off the suspend option for Pulse audio, but it happens whether I use Pulse or ALSA for output.
View 3 Replies
View Related
Jan 22, 2011
Ubuntu 10.10 x64 worked out of the box for me but there is one irritating issue.
I have Xonar DS(Oxygen HD Audio) with analogue 2.1 speakers and spdif passthrough to nvidia GTX260 hdmi output for my tv.
It makes random cracking noise on tv unless something is played, no matter on analogue or digital output, then is noiseless.
Alsa 1.0.23, kernel 2.6.35
View 3 Replies
View Related
Aug 15, 2011
I have a shared headphone/spdif jack on my ASUS B53J and am running Ubuntu 11.04 Natty. I am not able to get the digital spdif output to work. I have tested the spdif out under Windows 7 and it works perfectly.
aplay -L
Quote:
default
Playback/recording through the PulseAudio sound server
pulse
Playback/recording through the PulseAudio sound server
[code].....
View 1 Replies
View Related
Aug 29, 2010
I'm trying to get sound from Ubuntu 10.04 out thru the integrated realtek alc850 chipset to my home theatre via the spdif port. I installed the drivers from realtek but still no sound. Under Places-Preferences-Sound, only the IEC958 shows up. What else should I do? Neither Rhythmbox nor Alsa show the Realtec spdif.
View 1 Replies
View Related
Jun 18, 2010
On my initial setup I follow the Comprehensive sound guide that is posted on the ubuntu forums because I wanted to get the spdif work Optical out with surround. After a while I was able some how to get it to work and but my headphones would no longer output sound so in an effort to get sound back to the headphones I maanged to ruin the the settings for the spdif.My question is how can I get spdif back and switch between headphones and spdif.I there no way to figure it out how do I purge every file that has to do with sound and recompile. ( THe comprehensive sound guide showed how to purge the alsa utils but that didnt work if someone know why please let me know and if you could explain.)
View 1 Replies
View Related
Sep 19, 2010
I bought this motherboard 6 months ago and I've been hammering on it since then. I can get audio output on the analog channels but what I'd really like is output on the SPDIF (optical, digital) channel so that I can have better sound quality on my home theater system. What I've tried...-I followed the sound troubleshooting guide.-I tried the 6 stack/3 stack approach suggested on the ALSA website.-Tried compiling and installing the latest version of alsa.-Tried installing the development drivers for alsa that are put out by the ubuntu community.
View 1 Replies
View Related
May 29, 2010
Recently i put a DAC connected to the CL X-FI board via the SPDIF interface. Result is i can listen only one channel, the left one (hedaphone) while using the xmms, audacious.
The thing is that i'm able to listen both channels if i use the VLC configured with the same output, that is hw:2,4.
Info:
[root@kryptonbox ~]# lsmod | grep snd
snd_seq_midi 12353 0
snd_ctxfi 80557 1
snd_seq_dummy 7877 0
[Code]....
View 2 Replies
View Related
Jul 5, 2010
I currently have the following:-
Optical Out from my TV into the SPDIF / Optical In on my PC
Optical Out from my PC into my Sony 5.1 Theatre Kit
The audio from the PC comes through ok when listening to music and movies. But unfortunately I can figure out how to enable the audio passthrough from my Tv so that the audio comes out of my theatre kit. In Sound Preferences, the hardware is set to 1 Output / 1 Input [Digital Stereo (IEC95 Output + Digital Stereo (IEC95 Input]. When I click on the audio tab, the Input Volume is at 100% and the Input Level is moving in conjunction with the audio coming from the Tv.
I saw it mentioned in another thread to install Gnome Alsa Mixer which I've done, it seeems to identify the audio chipset as Realtek ALC882, the motherboard is an Abit AB9 Pro. Hopefully I'm missing some config somewhere or there a box I should be ticking but I just can't find it.
View 2 Replies
View Related
Feb 10, 2010
If I have SMP kernel would it work with single processor or only work with multiple processors system?
View 6 Replies
View Related
Feb 17, 2011
how to make creative web cam working with ubuntu
View 1 Replies
View Related
Apr 23, 2009
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies
View Related
Feb 2, 2010
I have followed the instructions at http://www.vcn.bc.ca/~dugan/setting-up-slackware.html (under "Making Firefox Perfect"), but I still get the error message"Firefox doesn't know how to open this address, because the protocol (rtsp) isn't associated with any program."
View 13 Replies
View Related
Jul 7, 2010
I wanted some input on chronic problems with Ubuntu:
1. Why does wireless almost never work right on Ubuntu?
2. Why, when Ubuntu just decides to turn off my wireless card, can I not just turn it back on?
3. Why do tar balls almost never unpack right?
4. Why are printer drivers so buggy?
5. Why do my MP3 players and digital cameras not work with Ubuntu?
I spent 3 hours last night trying to unpack a tar.bz2 file so I can run my Ralink network card. It worked fine until my son unplugged my computer. Now my card is disconnected and it will not reconnect. When I check forums no one has a simple answer for something as simple as turning a network card back on. On my Apple, it's simple: click my wireless icon and hit "on." tell me an easy way to just turn my wireless card back on, it would renew my faith a little in Linux.
View 4 Replies
View Related
Sep 11, 2010
When I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
View 3 Replies
View Related
Apr 8, 2011
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
View 3 Replies
View Related
Jan 12, 2011
I am trying to set up an unused machine as a web server for my students.
I originaly tried with Redhat 9 and had the same problems. I am using an HP Pentium 4 system with 2 network cards.
1) The built in Realtek RTL8139 configured as eth0.
2) An add in Broadcom BCM5782 Gigabit card that was added I presume when the built in card failed (we have a number of machines like this around the school), configured as eth1.
I did not realize the second card was installed when I had Red hat 9 on the system, but I discovered it after installing centos 5.5. I have tried to configure the system to use DHCP with and without getting the DNS from the provider, and both ways the system complains that there is no connection, check the cable, so it will not activate the device.
When I configure the device to use a fixed IP, I can configure the device, but I can't ping anything on the network other than myself. I suppose it is possible that both network cards have failed, but I get green link lights with both cards, when I connect them to my router, so I am at a loss as to why neither board seems to work. I don't have a spare network card to slide in because the computer takes a special mini card. Is there an easy way to test the board to see if the board is a problem?
View 2 Replies
View Related
Apr 27, 2011
i have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies
View Related
