Currently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 RepliesOn my initial setup I follow the Comprehensive sound guide that is posted on the ubuntu forums because I wanted to get the spdif work Optical out with surround. After a while I was able some how to get it to work and but my headphones would no longer output sound so in an effort to get sound back to the headphones I maanged to ruin the the settings for the spdif.My question is how can I get spdif back and switch between headphones and spdif.I there no way to figure it out how do I purge every file that has to do with sound and recompile. ( THe comprehensive sound guide showed how to purge the alsa utils but that didnt work if someone know why please let me know and if you could explain.)
View 1 Replies View RelatedI am attempting to configure my HTPC with FC13. You can see my hardware configuration at the following link.The problem I am facing is trying to output surround audio using the spdif (optical) interface. The system correctly recognizes the integrated sound card (MCP78S High Definition Audio), but fails to offer the option of digital surround output. The only option for digital output is plain stereo. On the other hand it does offer all the analog surround output options.I have tried modifying the /etc/pulse/daemon.conf and specifying it to use 6 channels, but it still uses just 2. And for added grief, it sends one of the channels to the subwoffer instead of the front right channel.
View 3 Replies View RelatedI have just bought a new PC with an ASUS M4A78-AM motherboard with integrated VT1708S 6-channel sound chip in it, so I freshly installed fedora 12 without any issues However, I can't get the surround sound working. I have searched many forums a lot, and haven't found any solution yet.It seems that even the SPDIF output does not work on this sound card, and that is what people talk about on almost every forum / mail list. So I was unable to find almost ANY information regarding ANALOG surround sound.
The motherboard has 3 jacks on it - green for FRONT / 2 speaker set; blue is the line in OR THE REAR-SPEAKER out, and pink is the microphone OR side speaker out in the 6-spk configuration.My speaker configuration is 4.1 [2 front, 2 back and subwoofer]. Line out does not produce any sound.I have uninstalled pulseaudio [sudo yum remove pulseaudio]Now alsamixer shows a lot of controls, but even if I unmute line out and set it to max, it is still not producing any sound.
I have just upgraded my box to be more multimedia friendly and one of the upgrades was to improve the sound card. I decided to get the Asus Xonar DX pci-e card. I have it working but the speakers are not plugged into the front output socket as the xonar dx only plays sound from side surround output. Will the sound be any better from the front out on my 2.0 speaker system or is the sound being directed out of the side surround out full quality? How to overcome this discrepancy?
View 8 Replies View RelatedI bought this motherboard 6 months ago and I've been hammering on it since then. I can get audio output on the analog channels but what I'd really like is output on the SPDIF (optical, digital) channel so that I can have better sound quality on my home theater system. What I've tried...-I followed the sound troubleshooting guide.-I tried the 6 stack/3 stack approach suggested on the ALSA website.-Tried compiling and installing the latest version of alsa.-Tried installing the development drivers for alsa that are put out by the ubuntu community.
View 1 Replies View RelatedFor months it was perfect. Simultaneous sound from both SPDIF and computer speakers. Today suddenly out of the blue no sound in SPDIF. If I click Test in KDE System Settings for SPDIF devivce that sound is played, so, I tried putting this device at the top, then sound comes only from SPDIF but not from the speakers!
God, why in Linux something perfect breaks into thousand pieces without any seemingly changes...
I just did an install on a new partition to upgrade my htpc. I'm unable to get any sound over SPDIF working. I do not have a receiver that accepts HDMI so I need to use spdif That said, i was able to test the hdmi portion of the sound with my tv and that appears to be working fine.[URL]Below is just the list of aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
[code]....
Alright so I just upgraded my 11.3 x64 to 11.4 using zypper dup and have now lost the ability to play digital output 5.1. Before doing the upgrade I was running alsa rather than phonon but apparently the upgrade decided to enable phonon, and I no longer show digital surround output. The soundcard I have is a CM8738 and I am using the coaxial output on it hooked into my receiver. In system settings->multimedia->phonon->speaker setup the soundcard shows and I have the ability to select different profiles.
However the digital output settings only show stereo and the sound output device the only one listed is CM8738 Digital Stereo (IEC958). I have selections for analog 5.1 and analog 7.1 but neither put anything out of the digital connection. As I said I was running alsa before and was able to do straight digital pass through which allowed my receiver to do the decoding and use all of my channels. How can I setup phonon to use digital passthrough, or switch back to alsa and get that setup again.
I just installed Ubuntu Lucid beta 2 on my desktop, and I can't seem to get the sound to work. I have a Soundblaster Audigy 2 card and the motherboard has built-in sound, but ubuntu doesn't recognize either of them. The only hardware option I have in my sound preferences is for SPDIF, and thats the only thing that shows up in alsamixer as well.
View 1 Replies View RelatedI am looking to get a sound card to put in my HTPC that is running Ubuntu 10.04. I bought Auzentech x-plosion sound card that has spdif support but it does not work. Does anyone know of any card that will work or am I out of luck??
View 2 Replies View RelatedAlsa says I'm using a HDA ATI SB audio card with realtek ALC662 rev 1. chip, I've set the default channels to 6 for 5.1 in /etc/pulse/daemon.conf but got only stereo.
; default-sample-format = s16le
; default-sample-rate = 44100
; default-sample-channels = 6
; default-channel-map = front-left,front-right
I would assume I have to do something with the channel map, but I don't know where to begin. I can say it is not a hardware issue as it works fine in windows 7 where my mic in is my sub-woofer/center out and my line in is my line in is my rear speaker out. I tried going into sound preferences to see if I could get it to use line in and mic in as sub-woof out and rear out , but there was no such option. All I was allowed was analog duplex 1 output / 1 input.
i recently migrated from windows to linunx
Motherboard intel gccr intel hd auduio My 5.1 sourround sound is detected as stereo in ubuntu i tried alsa and other stuff how to condifure it
When I decode an audio clip which contain 5.1 streams (the encoding doesn't matter - or does it?) I cannot find an option which allows redirection of the lower frequencies (from front, back and center channels) to the sub woofer (LFE channel). I understand that this perfectly normal and this is how 5.1 supposed to work. My problem is that my speakers are not full range, so they cannot reproduce the bass in the streams. What I want to know is if there is a way to do something like this: [URL]
Which is described as: Bass redir - Bass redirection. Route basses from all channels to subwoofer. Works only if it is subwoofer at output speakers. Highly recommended for systems with separate subwoofer. Basses are routed before mixing so basses are shown at LFE input level (although 'real' LFE may be absent).
I'm aware of the enable-lfe-remixing = yes option. It works fine for stereo, but not for 5.1
I use ubuntu 9.10 and my pulseaudio version is 0.9.19. The player I use most is SMPlayer (version 0.6.8 (SVN r3213)) and AC3-liba52 for AC3 decoding. My system is up to date.
I just installed Lucid X64 on my PhenomX4 machine and I can't get my 5.1 speakers working. Only works in stereo.
Sound Preferences have only stereo options, how can I get surround 5.1? If it helps, I have Realtek for sound.
I've been trying to get my surround sound(5.1) to work for the past couple of of days, followed a number of guides, but nothing seems to get it working at all. I'm connecting the speakers using 3 analogue audio cables, I have tested and they work fine under Windows. When I go into the Sound options in Ubuntu I don't see a 5.1 profile listed under the Hardware tab, only stereo(and that works fine).
The sound controller is a Realtek ALC892 built-in to my mobo(Gigabyte P55A-UD3).
Here is some info I've seen requested in other threads, I'm running 10.10 RC, but I can assure you it doesn't work under earlier versions.
Code:
Linux Yurippe 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 GNU/Linux
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
[Code].....
I just got a 5.1 Surround sound system and set it up. I found that it was only working as stereo, though (That is, only the two frontal speakers were producing any sound). I made sure everything was not muted in alsamixer and checked that the hardware was set to 5.1 in the Sound Preferences Hardware tab.
I'm using Ubuntu 10.10 64bit and my sound card is an onboard Intel DG41TY, Realtek ALC888VC codec.
I recently purchased a Creative Fatal1ty headset with a USB connection, and was wondering if it's possible to use its 5.1 surround sound capabilities under Ubuntu.
View 1 Replies View RelatedI have a Acer Aspire Revo R3600 running Ubuntu 10.10. Its a clean install, all I have done is update the NVidia drivers and ASLA. The PC connects to my AV Receiver via HDMI and I have stereo sound but no surround sound. If I go to System > Preferences > Sound and look under the hardware tab I only have "Internal Audio Digital Stereo (HDMI) Output" and no mention of surround sound or 5.1 etc. I assume this is part of the problem.
View 2 Replies View RelatedI have these Creative Inspire M4500 4.1 surround sound speakers.I got them to work succesfully on my older computer by installing the ALSAmixer. and then unmuting the channels. However on my new computer even after installing ALSAmixer, i cannot seem to be able to get playback from my rear two speakers. I tried the community ubuntu documentation and ALSA's own guide(which seemed too complicated for me.)
View 9 Replies View RelatedHere is the update to the old thread that somehow disappeared "HOWTO: A52 Encoded 5.1 Surround Sound Awesomeness with PulseAudio and ALSA on Hardy" thread (archived here). See also this bug report.There are two steps here: add the a52 plugin, and tell pulseaudio to use it.
Step 1:
Go to a terminal and do the following:
Code:
sudo bash
echo "pcm.a52 {[code]....
Pulse should come back on its own unless you disabled autospawn.Now pulse should be aware of your digital surround output. Go to System -> Preferences -> Sound. Click on the "Hardware" tab and change the profile to one of the 'Digital Surround 5.1' profiles. Play some sound (I like to test with www.pandora.com) and enjoy!If it doesn't show up, it probably means that alsa didn't create it correctly. To test if alsa sees the a52 device, type:
Code:
aplay -D a52:0
If it errors out (audio open error: No such file or directory) then that means it did not like your asound.conf settings. You might learn something by looking at the output of 'sudo alsa reload' or just 'aplay'.[code].....
I got a 5.1 desktop sound sys for my recently built gaming rig. It sounds great. On Windows, that is. In ubuntu when I'm playing music, primarily when the subwoofer plays the bass, the speakers sound like they're farting and ripping phone books in half. Also, they get very statticy and sort of quiet. In sound preferences, analog stereo duplex is selected, if that's of any value. How can I get good sound playback in ubuntu?
View 1 Replies View RelatedWell i will write this down one more time i hope you don't delete it again To enable surround sound with ALC888 on Intel DG31PR for all versions of ubuntu inluding Lucid.(this works on other distros with alsa as well) gksu gedit /etc/modprobe.d/alsa-base.conf Find this line (if there is no such line (or the file is empty) it doesn't matter just add the next line and save it)(note that on older Ubuntu versions the file is named "alsa-base" as far as i remember): # Prevent abnormal drivers from grabbing index 0
Add this line after the #Prevent abnormal drivers from grabbing index0: options snd_hda_intel model=3stack-6ch-dig Then use this command to edit pukeaudio: gksu gedit /etc/pulse/daemon.conf
Find this line:
; default-sample-channels = 2
Change it to (make sure to remove the ; in front of it):
default-sample-channels = 6
[Code]...
I found out there is no way to install headset's own drivers. At least I am looking for a way to switch its 5.1 property on. Is there any way for it on ubuntu 10.04 with pulse or whatever works?
View 1 Replies View RelatedMy 785G motherboard comes with an integrated sound card. In the manual I see there is an option to install Dolby Software to make 2-channel stereo sources play to 4, 5.1, and 7.1. Is there any equivalent Dolby or other software for OpenSuse 11.2?
View 3 Replies View RelatedRunning 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
I have a shared headphone/spdif jack on my ASUS B53J and am running Ubuntu 11.04 Natty. I am not able to get the digital spdif output to work. I have tested the spdif out under Windows 7 and it works perfectly.
aplay -L
Quote:
default
Playback/recording through the PulseAudio sound server
pulse
Playback/recording through the PulseAudio sound server
[code].....
I'm trying to get sound from Ubuntu 10.04 out thru the integrated realtek alc850 chipset to my home theatre via the spdif port. I installed the drivers from realtek but still no sound. Under Places-Preferences-Sound, only the IEC958 shows up. What else should I do? Neither Rhythmbox nor Alsa show the Realtec spdif.
View 1 Replies View RelatedI have on-board sound on a EVGA nForce 750i FTW edition motherboard, not sure if you need the board type, but I'm not getting any sound out of my headset which is a Razer Barracuda 5.1 surround sound. link me to a very basic tutorial video/text document for Ubuntu Linux.
View 1 Replies View RelatedI have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View Related