For months it was perfect. Simultaneous sound from both SPDIF and computer speakers. Today suddenly out of the blue no sound in SPDIF. If I click Test in KDE System Settings for SPDIF devivce that sound is played, so, I tried putting this device at the top, then sound comes only from SPDIF but not from the speakers!
God, why in Linux something perfect breaks into thousand pieces without any seemingly changes...
I just did an install on a new partition to upgrade my htpc. I'm unable to get any sound over SPDIF working. I do not have a receiver that accepts HDMI so I need to use spdif That said, i was able to test the hdmi portion of the sound with my tv and that appears to be working fine.[URL]Below is just the list of aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC1200 Analog [ALC1200 Analog]
[code]....
I just installed Ubuntu Lucid beta 2 on my desktop, and I can't seem to get the sound to work. I have a Soundblaster Audigy 2 card and the motherboard has built-in sound, but ubuntu doesn't recognize either of them. The only hardware option I have in my sound preferences is for SPDIF, and thats the only thing that shows up in alsamixer as well.
View 1 Replies View RelatedCurrently using an Asrock ION 330 with an SPDIF output and running 10.04It works as stereo but can't get the system to run as surround sound and everything shows as 2 channels only.The hardware itself supports it fine as it works under windows 7 without issues so it has to be a config issue somewhere.I have tried everything I can find via google including upgrading the alsa drivers but so far there has been no change.
View 1 Replies View RelatedI am looking to get a sound card to put in my HTPC that is running Ubuntu 10.04. I bought Auzentech x-plosion sound card that has spdif support but it does not work. Does anyone know of any card that will work or am I out of luck??
View 2 Replies View RelatedOn my initial setup I follow the Comprehensive sound guide that is posted on the ubuntu forums because I wanted to get the spdif work Optical out with surround. After a while I was able some how to get it to work and but my headphones would no longer output sound so in an effort to get sound back to the headphones I maanged to ruin the the settings for the spdif.My question is how can I get spdif back and switch between headphones and spdif.I there no way to figure it out how do I purge every file that has to do with sound and recompile. ( THe comprehensive sound guide showed how to purge the alsa utils but that didnt work if someone know why please let me know and if you could explain.)
View 1 Replies View Relatedthere is no errors in log, also the AV shows PCM input for all sound (pcm/ac3/dts and so on) but there is silence (trying with both pulseaudio and alsa). Everything works with kernel 2.6.35.6-48 and before. the problem exists at least for 2.6.35.9-64.fc14 and 2.6.36.1-11.fc15
my audio is
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC889 Analog [ALC889 Analog]
[code]....
I have just bought a new PC with an ASUS M4A78-AM motherboard with integrated VT1708S 6-channel sound chip in it, so I freshly installed fedora 12 without any issues However, I can't get the surround sound working. I have searched many forums a lot, and haven't found any solution yet.It seems that even the SPDIF output does not work on this sound card, and that is what people talk about on almost every forum / mail list. So I was unable to find almost ANY information regarding ANALOG surround sound.
The motherboard has 3 jacks on it - green for FRONT / 2 speaker set; blue is the line in OR THE REAR-SPEAKER out, and pink is the microphone OR side speaker out in the 6-spk configuration.My speaker configuration is 4.1 [2 front, 2 back and subwoofer]. Line out does not produce any sound.I have uninstalled pulseaudio [sudo yum remove pulseaudio]Now alsamixer shows a lot of controls, but even if I unmute line out and set it to max, it is still not producing any sound.
I'm trying to get AC3/DTS passthrough working with my HTPC in which I'm using the onboard sound from an nForce 4-based motherboard. I've tested it in Win7 to check that all the connections etc are set up correctly and it works perfectly there. However under Kubuntu I can only get 2ch PCM sound to work through the SPDIF connection. Any DTS/DD sources just result in silence.If I go into Multimedia settings in the System Settings panel, the SPDIF device that shows up there (once I enable advanced devices) produces no sound with the Test button. I can hear a click as the device is activated but no sound is produced. I can also see that a digital signal is making it to my receiver as it has an icon which lights up when it locks onto a signal.Has anyone had success with SPDIF passthrough in 9.10? I've tried twiddling all the settings in Kmix relate to IEC and also tried following the Alsa wiki on digital passthrough without any success.
View 2 Replies View RelatedUsing latest Ubuntu 10.04, the Creative Sound Blater X-Fi Titanium does not show (sound preferences) SPDIF (Digital).
Only Analog options are present.
While
Code:
alsamixer
shows S/PDIF with max volume... (IN and OUT)
Is there any alsa-base "options" to configure to see SPDIF in Sound-preferences?
I am using the Creative X-Fi Surround sound card and a Samsung 5.1 Home Theater system. When I play back MP3s, or system sounds are played, the beginning of the audio is cut off. The nature of the cut-off is that audio fades in instead of just starting. It's only the fraction of a second, but whenever sound is played after a silence (i.e. also in songs that have short silent breaks, like Roxette's "The Look"), the beginning of the audio quickly fades in. So in "The Look", instead of playing
Na na na na na, na na na na na, na na na na na na she's got the look
It plays:
[%fade in]a na na na na, na na na na na, na na na na na na she's got the look
Any ideas what is causing this? I already turned off the suspend option for Pulse audio, but it happens whether I use Pulse or ALSA for output.
Ubuntu 10.10 x64 worked out of the box for me but there is one irritating issue.
I have Xonar DS(Oxygen HD Audio) with analogue 2.1 speakers and spdif passthrough to nvidia GTX260 hdmi output for my tv.
It makes random cracking noise on tv unless something is played, no matter on analogue or digital output, then is noiseless.
Alsa 1.0.23, kernel 2.6.35
I bought this motherboard 6 months ago and I've been hammering on it since then. I can get audio output on the analog channels but what I'd really like is output on the SPDIF (optical, digital) channel so that I can have better sound quality on my home theater system. What I've tried...-I followed the sound troubleshooting guide.-I tried the 6 stack/3 stack approach suggested on the ALSA website.-Tried compiling and installing the latest version of alsa.-Tried installing the development drivers for alsa that are put out by the ubuntu community.
View 1 Replies View RelatedI currently have the following:-
Optical Out from my TV into the SPDIF / Optical In on my PC
Optical Out from my PC into my Sony 5.1 Theatre Kit
The audio from the PC comes through ok when listening to music and movies. But unfortunately I can figure out how to enable the audio passthrough from my Tv so that the audio comes out of my theatre kit. In Sound Preferences, the hardware is set to 1 Output / 1 Input [Digital Stereo (IEC95 Output + Digital Stereo (IEC95 Input]. When I click on the audio tab, the Input Volume is at 100% and the Input Level is moving in conjunction with the audio coming from the Tv.
I saw it mentioned in another thread to install Gnome Alsa Mixer which I've done, it seeems to identify the audio chipset as Realtek ALC882, the motherboard is an Abit AB9 Pro. Hopefully I'm missing some config somewhere or there a box I should be ticking but I just can't find it.
Just installed 6.0.1 on my computer with a GA-H55N-USB3. It seems to have a Realtek ALC892 on it, and six 3.5mm jacks out and SPDIF too. I installed alsa and sound came from the 3.5mm jack, but I want SPDIF. I don't know what approach to make to enable it and that's the problem. SPDIF just have two modes in alsamixer, "00" or "MM" (muted). Master and PCM are set to 100. The SPDIF connecter is'nt even lit. How to enable it? I tried "alsactl init" and then rebooting, it made no difference.
[code]...
I am a linux newbie; nethertheless I am trying to setup an old PC as jukebox using Debian. Unfortunately I can't get the SPDIF of the soundcard working (which works fine using windows). I tried a lot, spent the last evenings in the web to find an answer.. I will try to tell you what I tried so far, hardware and command outputs (aplay -l / -L) are at the bottom: For me it seems that the driver is installed correctly; with "aplay test.wav" I can hear sound with normal speakers and "aplay -L" shows the SPDIF device name (see bottom). But if I try to use it using "aplay -D iec958:CARD=CS46xx,DEV=0 test.wav":
[Code]...
I have a shared headphone/spdif jack on my ASUS B53J and am running Ubuntu 11.04 Natty. I am not able to get the digital spdif output to work. I have tested the spdif out under Windows 7 and it works perfectly.
aplay -L
Quote:
default
Playback/recording through the PulseAudio sound server
pulse
Playback/recording through the PulseAudio sound server
[code].....
I'm trying to get sound from Ubuntu 10.04 out thru the integrated realtek alc850 chipset to my home theatre via the spdif port. I installed the drivers from realtek but still no sound. Under Places-Preferences-Sound, only the IEC958 shows up. What else should I do? Neither Rhythmbox nor Alsa show the Realtec spdif.
View 1 Replies View RelatedI am attempting to configure my HTPC with FC13. You can see my hardware configuration at the following link.The problem I am facing is trying to output surround audio using the spdif (optical) interface. The system correctly recognizes the integrated sound card (MCP78S High Definition Audio), but fails to offer the option of digital surround output. The only option for digital output is plain stereo. On the other hand it does offer all the analog surround output options.I have tried modifying the /etc/pulse/daemon.conf and specifying it to use 6 channels, but it still uses just 2. And for added grief, it sends one of the channels to the subwoffer instead of the front right channel.
View 3 Replies View RelatedI am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies View RelatedI have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies View RelatedAfter installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies View RelatedI have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies View RelatedI am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies View Related