So I just built a new computer and installed Ubuntu 10.10 on it here are the specs
Mobo: Asus M4a785T
CPU: AMD Phenom II X4 965 Black Edition
HDD with OS: WD Blue 640GB
Storage HDDs: 4xWD Green 2TB (2 of the HDDs are TrueCrypt)
When I copy data from one of the TrueCrypted HDDs, the computer will freeze (display gets screwy and unresponsive). Time to screw up will vary. Sometimes its as soon as I copy and sometimes its 30mins into the copy of lots and/or large files. I'm pretty sure its not the HDD because I've used these same HDDs on an older computer with no issues. I recently put the HDD giving me issues into an external case and hooked it up to my laptop running Ubuntu 10.10 and copied the same files that were giving me fits. So I thought it might be the system and not the HDDs So I ran prime95(or rather the linux equivalent)It ran for over 12Hrs with no issues. so I think the system is fine. What could be causing the constant crashing when copying files?
I'm new too ubuntu so I don't know much. What I do know is, my computer keeps freezing when I try running more then a few programs. I ran a df -h test.
[code].....
what I should do next, or any thought on what the problem might be. BTW I'm using Ubuntu 10.04.
I installed ubuntu 10.10 and ever since then every now and then when i boot up the computer will just freeze. someone told me that it is because my comp is old and that i need to try an older version
i'm using fedora 12 on my new EASYNOTE_TJ65-DM-139IT [URL]... from time to time (about one time a day) computer freeze, i cannot use my keyboard, mouse still work (that is: i can move the pointer on the screen) but click on opened windows, button, menu doesn't do nothing. I can't understand what's the problem and how to solve it, all i can do is hardware turn off the computer and reload fedora. This is quite disappointing, hw power off it every day can harm my notebook.
Randomly; my computer will freeze up. I can move the mouse but I cannot click on anything. This has happened at least 20 times today. Occasionally my computer will totally just shut down. My computer has been almost completely rendered Useless. I do not know what to do or even where to begin. The sooner we solve this problem the better. I do college online... so this has a major impact on me and my work and progress as a student.
This computer freezes, requiring power-off, somewhere between 2 seconds and 2 hours after boot-up, most every time I use it. Sometimes I've had to power-down perhaps six times in 10 minutes. When it freezes I have a movable mouse-pointer that can select nothing. Right- click does not operate. I don't seem able to isolate a single cause. I ran a RAM check with no errors showing. Matters not which version of Ubuntu I choose when booting. I've replaced mouse and keyboard. Only running 256 meg of ram and do plan to
I am running Ubuntu Lucid with Compiz, Cairo Dock, Screenlets, on a Laptop with an i7 Nvidia graphics card. After I wake my laptop up from a suspend or hibernation I notice that my computer will freeze for several seconds every so many seconds. After looking at the System Monitor I noticed that the application that is stealing all my CPU and causing my computer to freeze is XOrg. Here is my xorg information
[code]...
I never had this problem before December. I was thinking it may have something to do with ubuntu header 2.6.32 because it was soon after I started having problems. Does anyone have any theories or ideas as to why XOrg is stealing my CPU?
i had a previous post regarding startup issues with sshkey generation here [URL]... now im stuck at the part after that where the starting sendmail line is, im starting to think that my ram is going to pieces on me because windows 7 and ram hungry games like mass effect ran just fine on the same machine 3 weeks ago... i ran a memory test off an ubuntu live 9.10 cd and it passed so idk whats going on here i've tried two distros and both strike out and i get stuck at startup and never even see that purdy gnome desktop.
I installed a network program and a system info program on peppermint ice and now when I type in my username and password the computer will freeze up and the number lock, scroll lock, and caps lock lights flash till I turn the computer off?
This is happening pretty often. when in ubuntu, usually while i'm browsing the web, my browser will go dim then a box will come up saying something along the lines of missing resources. the thing is, all my desktop icons will then turn to red x's and no text characters on any further boxes will show. when i restart it says grub error and takes one more restart to finally come on. i got fed up with it and switched over to windows 7 where my browser also froze and my computer froze up.
I am currently using opensuse to run a server, however I am experiencing some difficulties. Every once in a while, and I mean completely randomly. This will occur out of no where, and then not happen for five days, then occur twenty times in a row. What happens is the computer runs fine, and all is well but suddenly it wont connect to the internet. All applications are fine and everything is working. It isn't frozen, just won't load webpages. I am using a belkin 111v2 wireless g adapter and it usually works fine.
So when the internet freezes, if I unplug any usb the computer freezes. The mouse stops moving and the keyboard won't respond. The caps lock light won't even turn on. However the laser on the mouse is on, but the computer won't respond. Its like its shutting off the usb hubs. The only thing to do is force shut it off and restart until i no longer have the problem. Sometimes it helps if I open it and re-seat the ram, but that gets old. Does anyone have a solution?
Let me start by saying that with the previous kernel 2.6.31.5 when I opened network configuration, it didnt even recognize my card when i'd go to modules. After I updated to 2.6.31.8 it didnt recognize it until I installed the ralink-firmware 1.1.3.5. After that I could configure it using rt2870sta setting in modules. But once I restarted it would freeze after a few seconds after I could see the desktop on startup. I reconfigured the card to be 'manually' powered, but now it just freezes when I click on the access point I want to connect to. When it freezes the caps lock and scroll lock start blinking and the only way to turn off is holding the power
The first two times I entered the wireless key on the prompt that appeared shortly after login, the computer froze completely. ctr-alt-f1 ctr-alt-backspace did nothing. The third time, I closed the first prompt and after 10 minutes I tried connecting again. It didn't freeze, at first. The internet worked. It took about 10 minutes later for it to freeze. Now, whenever I boot up, it freezes a few seconds after login. I can boot recovery mode, but I don't know what to do from there. Heres some info I got from the recovery mode:
Computer Brand: Sony PCV RX850 Ubuntu 10.4 32 bit 2.6.32-21-generic i686 Realtec 8185L chipset iwconfig
I have to say I'm really enjoying it. However, when I have been watching videos on ..... and revision3.com after a random amount of time the computer will freeze up and I have to do a hard restart of the computer.I've gone through the multimedia sticky post at the top of these forums with no real luck.Oh just got the computer today as a real budget system.AMD Athlon II X3 435 2.9ghzMSI K9N2GM-FD AM2+on board NVIDIA Geforce 82004GB DDR2 memoryI'm using ubuntu 10.04 64bit version.
Ok so I'm running Mint (not full Ubuntu), and I'm not sure if this is a problem with the FS, Kernel, what not.I'm running Linux Mint 9 - x64 - kernel 2.6.35.14 - and when I did a large file copy operation (9GB) it froze up my system until the copy operation was done. I couldn't even use Pidgin, Mozilla, or anything, when trying to open up another Terminal it froze as well.
Works fine in Windows 7 on this PC. It's a 2 week old Dell Studio 1749, with no after market software installed aside from Ubuntu (as a secondary OS). When I plug the USB adapter in, the computer locks up. Only while in Ubuntu though. Not sure what the deal is. Chipset is RealTek RTL8187. The adapter is new, fresh out of the box.
i just installed ubuntu and the apps i wish to use and well where do i start its freezing sounds crashing then my internet goes and most apps are crashing it makes the desktop unuseble. It works really well for like a haf an hour then crashes i never had this problem in windows witch i had on here before i may go back unless i can find some kind of fix.
I recently ran into a problem with my install. I accidentally messed with the bottom panel in my KDE on my root account. This caused my desktop to freeze up. Every time I attempt to restart into my root, it loads, but is completely frozen. Is there some way I can overwrite my KDE config files without starting X server or from a standard user account?
Two weeks ago my computer started freezing on start up when plugged in. It was suggested to upgrade the APM. What is this and is it not updated through the package update? If not how do I upgrade it?
I first noticed the problem because my wireless internet will stop working. The usb stick has its LED constantly on but it fails to connect. I have tried some methods of restarting the networking, like "sudo restart network-manager", disabling and re-enabling the wireless and networking from the taskbar applet. I tried removing the module and restarting it. It might be a bigger problem because I'll find that things will randomly hand for awhile, like opening system monitor, or running terminal commands. They do eventually run but only after several minutes. A restart seems to get everything working again, but the problem comes back at random times. I am willing to solve this right now as I have time, just let me know what info you need and I will post it.
Update: Some more info I forgot to include. I am running Ubuntu 11.04. It just froze again, I tried logging in and out but the internet still wouldn't work and things were hanging, I couldn't get file manager open. I have even tried shutting down the computer and had it stall on the Ubuntu logo with the dots loading so I had to hard restart.....
I have configured a squid proxy server with @2 eth in different network subnet and with site blocking and extn file download blocking. One eth0 for office wired network and another eth1 is for office wireless network for laptop use for guest and visitors.
The problem is [URL] is an Indian government website, which is not working though this proxy server and the Internet Explorer is getting very slow and freezing the computer. In alternate I have configured a another test server with squid proxy with out any security and test the same. the problem is still with the all the computer in the network. The above website is perfectly working with Gateway configuration in TCP/IP properties in Network Configuration in MS Windows XP computers but through squid proxy its not working.
I am trying to copy four files from my machine, through a second machine, and finally to the destination. The destination computer can only be reached through the second computer, and I am curious to know if there is an easy way to do this. I am able to ssh to the middle machine and then ssh from there to the destination. I know that I could just copy from the first machine to the second, and then from there to the third. I guess that I'm curious to know what kind of command I can run to do this all at once or even if I could do such a thing (which I'm betting I can). I need to copy these files as root on the destination machine too.
I would like to be able to auto login to my centOS 5.4 linux machine when it boots up. Is there a intuitive way to do this? I'm running the motif window manager. The problem is that my computer boots up into motif but it asks me to login as root. I would like to eliminate this.
Is there any way a non-root user can programmatically determine which days the computer ran during, say, the last month?
The information is in /var/log/messages.* but those files are root:root 640.
Non of the world-readable /var/log files on the Slackware 13.0 development system can be used:boot Not present if boot logging not enabled (default). dmesg No timestamps. lastlog Not enough info. wtmp Rewritten on each boot so not enough info. EDIT: not correct: by default wtmp is rotated weekly and kept for one month as configured in /etc/logrotate.conf xdm.log Not present if xdm not used. Xorg.0.log Not present if X not run.
I don't know that this post fits here, nor does it fit in "Applications." installing suse doesn't seem to give you the chance to name your computer. Now my computer is called "linux-0qvi" or something strange like that. I want to name my computer. Can I do this now without screwing things up??
Also, during install, there didn't seem to be an opportunity to make a separate root password. My first (and main user) account is now set up with admin rights, so I have to type in my account password every time I do something as root. Can I set a separate dedicated root password without screwing up my system?
Yes, I know this is not a good practice, and this is only a short-term solution.I have a server with a web-file-server daemon running internally as root, so the permissions for all files it transfers/creates have a uid/gid of 0:0.This is fine for the daemon, but I would like to manage those files from another workstation - actually a few workstations on a very limited LAN subnet - through NFS. How would it be possible to have users from a certain subnet mount NFS with root read/write abilities?I have seen the anonuid/anongid options (for the /etc/exports file), but I'm not so sure this is the right way to go.
Started slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
