Hardware :: Hard Drives Are Not Detected Past Ubuntu 6.06
Jan 1, 2010
I couldn't decide if this went in hardware or software, as it is both in a way. If I try to install 9.04 (I've been trying for a few months, and 9.10 is kind of slow) it doesn't see my hard drive. It's not even listed in the fstab! It's like it's invisible. However, If I install ubuntu 6.06 it can see it fine! This is a kernel problem, as it occurs with other flavours of linux as well, but openSolaris and any BSD See it just fine.
One other interesting factor is this: If I update to 8.10 LTS and choose the third kernel on the list, it runs fine! There is another snag though. In that kernel of 8.10 it can't see my keyboard, unless I bring up a terminal!
The preferred solution would be this. Find a way to make it work, possibly incorporating it into the kernel. Also, It's not a bad disc. I used the same one for two other pcs, and there were no issues whatsoever.
View 14 Replies
ADVERTISEMENT
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Jul 5, 2011
I have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies
View Related
Aug 23, 2010
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies
View Related
Jan 6, 2010
am using the community build of Ubuntu 9.10, I have an old as dirt Power Macintosh G3 Blue And White, and I can't get it to install. I tried the live CD first of course, and now the alternate. Both tell me that no disk drives detected, even though Mac OS 9, X, and Fedora all detect both my 40gb seagate, my 120gb seagate, and my 120gb maxtor.I am trying to get this running with some sort of linux for a school project.What is happening is it asks me what driver to use, and if I select the bottom option that it is none of the above, it asks me to load a driver from a USB flash drive, which I don't know what driver to use. They are all standard IDE devices hooked into the built in bus. I obviously can't move past this point.
Specs:PowerPC G3 450mhz1gb of RAM120gb hard driveDVD-ROM driveZIP 250 drive (currently not hooked up)PCI ATI Rage 128 16mb video card (stock)Apple Fast ethernet 10/100 PCI card (machine has built in ethernet, but I am turning this machine into a hardware firewall, so a second NIC is required).Oh, I have used this machine perfectly with ubuntu before. When I first got it, I started out running Ubuntu 5.10 way back in 2005. I was thinking of downloading and burning 6.06, and upgrading from there.
View 9 Replies
View Related
Apr 16, 2010
I'm trying to install 10.04b2 x64 on my new rig and for some reason the live cd can't detect both of my 1TB Sata 3 drives. There is no Raid and the bios has them flagged as IDE. I have also tried adding pci=nomsi to the boot string to no avail.
View 8 Replies
View Related
May 15, 2010
I can't finish installing Ubuntu 10.04. I have a Corsair Nova 128 GB solid state drive, the 128 GB model of this series, to be precise. I have an ASUS P5N-T Deluxe motherboard. It has a six xSATA 3 Gb/s ports NVIDIA MediaShield RAID controlelr on it. In Disk Utility, it shows up as nVidia Corporation MCP55 SATA Controller, using the sata_nv driver. I have the 128 GB drive plugged into one of these ports. I have disabled RAID completely in the BIOS.
When I boot the Live CD and run GParted, the drive shows up fine. I've got a 70.81 GiB NTFS partition (Windows 7), a 4.00 GiB swap partition, and a 44.43 GiB ext4 partition, onto which I had planned to install Ubuntu 10.04. I created the swap and ext4 partitions earlier, but at one point, that was unpartitioned space.
The problem is that when I run the Install app to install Ubuntu 10.04 on my SSD, when I get to step 4 of 8 (Prepare partitions), exactly zero drives show up. A while ago, I had a couple of Seagate 1.5 TB mirrored drives plugged into two of the ports, and they showed up fine, but no 128 GB SSD. In trying to troubleshoot this problem, I unplugged those and just left the SSD, and zero drives showed up. I disabled RAID in the BIOS, and it still doesn't show up. I moved the SSD from the port it was plugged into and plugged it into one of the ports that one of the 1.5 TB drives was plugged into. It still doesn't show up.
Nuts and bolts of it: Seagate 1.5 TB drive plugged into port: no problem. Corsair Nova 128 GB SSD plugged into port: doesn't show up. But again, only in the Install utility. In Disk Utility under SATA Host Adapter/MCP55 SATA Controller, I see 128 GB Solid-State Disk/ATA Corsair CSSD-V128GB2 listed plain as day. In GParted, I see a 119.24 GiB /dev/sda device with the partitions I've created on it plain as day. I can pull up a terminal and mount /dev/sda3 /mnt/ssd without any problem and access files on it. But for whatever reasons, the Install program and only the Install program can't see it. I'm dead in the water. Obviously, I can't use Ubuntu if I can't install it. What can I do to get this disk drive detected?
[Code]....
View 2 Replies
View Related
Jul 20, 2010
I am installing Ubuntu 10.04 on my new Mac Mini. It has 2 500GB hard-drives, and I have created a partition for Ubuntu. During installation, however, Ubuntu is not able to detect my disk drive, neither my network interface. So I am not able to 'Partition Disks' which is part of Ubuntu installation. Did any of you encounter this problem? Any solutions or workarounds? Should I setup my disks in anyway before installation or use boot args?
View 2 Replies
View Related
Oct 16, 2010
For quite a while I didn't have any problems and everything worked just fine, until I had to upgrade to KDE 4 from 3.5. And that, as you understand, required a major upgrade of quite a lot of stuff (not only the GUI, but also some of the system including the kernel). After I spent a while fixing up the mess (it works ok now, mostly), I still have quite a problem with optical drive and external disk detection.
Problem 1. DVD drive.
Sometimes it works fine without any errors - the system detects the drive and can write and read the mounted DVD (that's exactly how it was before the upgrade). And sometimes (or should I say most of the time?) there is no drive detected.
Problem 2. Flash drives.
I connect a flash-disk. It gets get detected, mounts automatically - yahoo! But.If I start the system with the drive already connected, then the device is not even recognized (doesn't appear in /dev). So I have to replug it.Used to work fine before.Something tells me that the problems have a common cause. Correct me if I am wrong. Please help!
View 2 Replies
View Related
Apr 10, 2011
To start with I know this is not a linux problem, it is purely hardware.After the computer has been on for a while and then restarted bios does not detect in POST the usb sticks that it is supposed to use to boot from. his is obviously a problem as bios can't use something it can't see to boot from.I'm wanting to know if anyone else has had a problem like this with my hardware? I suspect it is the Asus M4A78LT-M LE that has a usb detection problem, since I've tried plugging the same sticks in to another pc and they do not have the same issue on that pc.
root@dlnas:~# lshw
Code:
dlnas
[code]...
View 5 Replies
View Related
Jun 3, 2010
We are try to install Fedora 12 or Fedora 13 x86_64 on HP Server Blade ProLiant BL460c G6. And when the installer try to find storage devices - it can not find any hard drivers. We are have message on screen - "Finding storage devices" and the installation process is not continue.... Fedora 10 and Fedora 11 x86_64 are installed very well. The device /dev/cciss/c0d0 is present in system and all it partitions - c0d0p1, c0d0p2 ... Command fdisk -l /dev/cciss/c0d0 has no any output.
lsusb -v output:
0c:00.0 RAID bus controller: Hewlett-Packard Company Smart Array G6 controllers
(rev 01)
Subsystem: Hewlett-Packard Company Smart Array P410i
[code]....
View 1 Replies
View Related
Jan 6, 2010
I recently installed Fedora 12 for use with Amahi HDA. Before installing on the Hard drive I used the LIVE CD to test it out. While using the LIVE CD I could see all my HDD's. My file system, my 2nd Hard Drive, and my Raid 0 Configuration. (2 250GB drives) and could browse all my files on those drives.
After installing the full version on my hard drive, my RAID drives are showing up as seperate drives. I have a Asus P4P800 board using hte SATA raid. I know its FAKERaid and not a true hardware raid.
My goal is to restore the Raid in Fedora and make those drives active. However, i dont want to lose any of the data on those drives. To make sure I wasn't an idiot, i rebooted withthe LIVE CD again and verified that I could see the Raid Array.
View 3 Replies
View Related
Feb 23, 2009
I'm in rescue mode with Centos 5.2 disk trying to install/mount a new disk to extract data out from the failed server.
Plugged in a new SATA drive and syslog shows the drive being detected
SCSI device sdg: blah
sdg: Mode Sense: 00 3a 00 00
sdg: unknown partition table
sd 3:0:0:0: attached scsi disk sdg
However fdisk and mount does not find the drive. I tried echo "---" /sys/class/scsi_host/host3/scan based on one of the previous threads but get "write error: invalid argument".
how should I get the drive to be usable?
View 4 Replies
View Related
Jan 4, 2010
My Toshiba 500Gb USB hard drive is not being detected anymore when i insert it in 9.10. It only started doing this from last week, it was fine before (and it works fine in Windows XP). The connections are fine and all, because when i type "lsusb", i see it as follows:
Bus 001 Device 003: ID 19d2:0063 ONDA Communication S.p.A.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0930:0b09 Toshiba Corp.
[code]...
View 9 Replies
View Related
Nov 21, 2010
I am trying to mount a 2nd NTFS storage disk in my new installation on Ubuntu 10.10, I can see it in the disk manager, but cannot access the files, I tried following the steps on this on another thread and i got the following error:
View 8 Replies
View Related
Jan 5, 2011
I have 1tb Seagate Freeagent NTFS External HD. I have Windows Vista Ultimate SP1 with dual boot as Ubuntu. I'm primarily a windows user, since i'm not that well acquainted with linux. External Hard Drive does not detect- when i connect it..it just gives a whirring sound and the "My Computer" window hangs. Figured out the cause- and temporary solution- The drive should do principle mount automatically. It won't if the file system is not "clean". That is possible if the drive was connected while you hibernated Windows, or if you did not properly disconnect the drive.
I booted with ubuntu and did the following-
sudo fdisk -l
and got the following:
Disk /dev/sdb: 1000.2 GB, 1000204884992 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x396e2b4d
Device Boot Start End Blocks Id System
/dev/sdb1 1 121601 976760001 7 HPFS/NTFS
Then I typed:
sudo mkdir /media/FreeAgent
sudo chmod 777 /media/FreeAgent
And wrapped it up with editing fstab with the following code:
#FreeAgent USB Drive
/dev/sdf1 /media/FreeAgent ntfs defaults 0 0
Now the browser window for the freeagent hard drive pops up and I can access everything. I try to shutdown the computer but it won't as long as the hard disk is connected. So I have to pull the usb out. And the problem remains the same. I want the hard disk to be detected normally on my windows/linux (like normal usbs work-plug it in and it works). Also have no clue how to work a temporary solution like this with windows yet. I have boot with ubuntu everytime and repeat these steps when I want to access it.
View 3 Replies
View Related
Jun 3, 2011
I Installed Ubuntu 9.04 with XP theme. Then I installed Picasa and I have pictures on a 2nd hard disk. When I restart the PC Picasa doesn't see the 2nd drive. The 2nd HDD is mounted under /media/disk and clicking on the "My computer" icon (this is XP theme), I see the 2nd hdd. Now, I have to add this disk to Picasa again for it to scan the pictures. I don't want to do this on a regular basis.
View 1 Replies
View Related
Aug 10, 2010
I have a Centos 5.5 system with 2* 250 gig sata physical drives, sda and sdb. Each drive has a linux raid boot partition and a Linux raid LVM partition. Both pairs of partitions are set up with raid 1 mirroring. I want to add more data capacity - and I propose to add a second pair of physical drives - this time 1.5 terabyte drives presumably sdc and sdd. I assume I can just plug in the new hardware - reboot the system and set up the new partitions, raid arrays and LVMs on the live system. My first question:
1) Is there any danger - that adding these drives to arbitrary sata ports on the motherboard will cause the re-enumeration of the "sdx" series in such a way that the system will get confused about where to find the existing raid components and/or the boot or root file-systems? If anyone can point me to a tutorial on how the enumeration of the "sdx" sequence works and how the system finds the raid arrays and root file-system at boot time
2) I intend to use the majority of the new raid array as an LVM "Data Volume" to isolate "data" from "system" files for backup and maintenance purposes. Is there any merit in creating "alternate" boot partitions and "alternate" root file-systems on the new drives so that the system can be backed up there periodically? The intent here is to boot from the newer partition in the event of a corruption or other failure of the current boot or root file-system. If this is a good idea - how would the system know where to find the root file-system if the original one gets corrupted. i.e. At boot time - how does the system know what root file-system to use and where to find it?
3) If I create new LVM /raid partitions on the new drives - should the new LVM be part of the same "volgroup" - or would it be better to make it a separate "volgroup"? What are the issues to consider in making that decision?
View 6 Replies
View Related
May 23, 2010
i have 2 hard drives showing up on my desk top and when i try to unmount them i get an error
Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sdc1 from /media/new movie storage
and
Error unmounting: umount exited with exit code 1: helper failed with: umount: only root can unmount /dev/sdb1 from /media/STUFF
when i try to unmount the other one. now one problem i see is that the labels are wrong the error for /media/stuff came up when i tried to unmount /media/new movie storage, and and the other way around for /media/stuff. also new movie storage is labeled as safe every ware else including inside windows
View 1 Replies
View Related
Sep 27, 2010
Earlier I had two physical hard drives in my computer, one with Windows and one with Ubuntu. Now I have a new computer and have installed these hard drives in it. I run Windows 7, and I can find the Windows disk, but not the Ubuntu disk. This doesn't surprise me, as Ubuntu is another filesystem, however, earlier I could format it with a partition manager, but now I didn't even find it with that!
View 9 Replies
View Related
Jan 23, 2011
I have installed two hard drives. One is a Sata drive and the other an IDE drive.They are both functional drives. On boot up only the Sata drive shows up. How do I get both drives to boot up together please.The Sata drive has Ubuntu on it and the IDE drive has Fedora on it' I would like to access all of them.
View 3 Replies
View Related
Mar 11, 2011
I'm looking for a way to set up a backup with two 2TB hard drives. What I want to do is basically mirror two drives. What ever I copy to the one drive I want it to be "cloned" with the other drive.
Is there any software that could help me with this? Does anyone know of a better to do something like this?
View 9 Replies
View Related
Mar 30, 2011
I have a nice computer i have been dual booting between either ubuntu or win7. i am wanting to remove win7 and install winxp sp3, so i can use media center with my xbox. i preferred that win7 work, but since my copy is not genuine, its authenticity is believed to be the culprit in connection errors with the xbox. i have not been able to find a linux alternative, which i doubt even exists due to the proprietary nature of the xbox.
So, my question is how do i reformat the win7 hard drive? are there issues i need to worry about that may reformat both hard drives on accident? and when the hard drive is formatted, will i be prompted to choose which hard drive to install win xp on?
View 2 Replies
View Related
Apr 29, 2011
My computer has 2 40GB hard drives (yes, it's really old). One of these hard drives has Ubuntu installed on it, and I would like to use the second hard drive as a data storage device that is usable by anyone who just wants a random place to drop random stuff. How do I do this?
View 2 Replies
View Related
Jun 2, 2011
I am trying to install windows 7 over Ubuntu, however when i run the install disk it tells me that my hard drive is not formatted in the correct format. I have then loaded up Ubuntu, tried to re-format using Gparted and it won't let me re-format my hard drive when I right click on it. The only option I get when right-clicking is to unmount the drive.
View 7 Replies
View Related
Jul 22, 2011
I have ubuntu 11.04 installed on a 80gb hard drive and everything was running fine. I then installed a second drive (1gb) for storage. It worked fine after a reboot but now it won't boot. I'm pretty sure it's just confused as to which drive is the boot drive. I'm not sure as to how to fix it in GRUB2.
View 2 Replies
View Related
Mar 14, 2011
I have a problem with my external hard drive. I've always used to connect it to my Ubuntu Server with the following command: sudo mount -t ntfs-3g /dev/sdc1 ..and it's worked fine, but after a reboot I did a couple of times ago, the hard drive no longer appears.sudo fdisk -l doesn't show the hard drive anymore. Connecting it to a Windows computer works, I even tried the "safely remove harddrive" function, but to no avail.
View 2 Replies
View Related
Mar 18, 2011
I am trying a network install of debian 6.0 by dumping the contents of a DVD onto my local http server. For some reason the Western Digital 80 GB pata HDD doesn't get detected when I click on 'detect disk', I even tried with a SATA, no luck.
View 7 Replies
View Related
Mar 17, 2010
I want to make a RAID5 array with 4 2TB hard drives. One of the drives is full of data so I will need to start with a 3 disks and then once I copy the data from the 4th onto the array, I will then add the 4th drive. This will be my first experience with RAID. I've spent a few hours searching for info but most of what I have found is a bit over my head.
View 9 Replies
View Related
May 1, 2010
I have a machine that is dual booted with win vista. It has 3 HD's. I created the partitions for the non-bootable drives in windows, ages ago. Prior versions of ubuntu would detect the drives, when I clicked on them in nautilus, I was prompted for my password, then the drives were mounted for the rest of the session. any idea how to mount these drives properly? The documentation linked to above describes ext3 and fat32 file systems (I tried both)
View 7 Replies
View Related
