I Installed Ubuntu 9.04 with XP theme. Then I installed Picasa and I have pictures on a 2nd hard disk. When I restart the PC Picasa doesn't see the 2nd drive. The 2nd HDD is mounted under /media/disk and clicking on the "My computer" icon (this is XP theme), I see the 2nd hdd. Now, I have to add this disk to Picasa again for it to scan the pictures. I don't want to do this on a regular basis.
View 1 RepliesI am trying a network install of debian 6.0 by dumping the contents of a DVD onto my local http server. For some reason the Western Digital 80 GB pata HDD doesn't get detected when I click on 'detect disk', I even tried with a SATA, no luck.
View 7 Replies View RelatedI have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
View 7 Replies View RelatedI tried to install ubuntu 10.10 today through livecd. but the partitions in my 60gb samsung harddisk are not detected. My entire harddisk is shown as unallocated free space. Also gparted is not detecting the partitions as well. I am currently not facing any problems with my partitions in windows xp. I tried the solution given here (to no avail): [URL]. I have had no such problems with previous versions of ubuntu.
View 9 Replies View Relatedi'm using athlon 64 bit , asus a8vmx mbd, 1gb ram
View 3 Replies View RelatedAll of my computers are second-hand (except 1 laptop but it doesn't count) and I see in my Dell 4600 there are 2 SATA connectors on the motherboard. I picked up a 250 GB SATA hard disk and cables recently and tried plugging it in but the system doesn't see it. I even disconnected all other disks to make sure there wasn't a conflict (master/slave) issue going on but the system still does not see it.
The disk is vibrating so I assume it is getting juice and is spinning. Is there a setting or something I have to do to tell the system to access the SATA? Do I have to look at RAID settings if there is only 1 SATA disk? Can I not have a SATA disk and an ATA disk plugged in at the same time? I want to try and determine if the disk is bad, or is it PEBKAC!
Hardware: Toshiba Satellite L755Software: openSuse 11.4 with kernel 3.1.0-rc1-98-g72fa599-1-vanillaPeripherals: Logilink USB 3.0 to SATA HDD Adapter with Western Digital WD2500JSI installed the Vanilla kernel in the hope that USB 3.0 will work. But though some things really have been fixed (for instance, the notebook can resume from sleep mode), USB 3.0 still doesn't work.
Code:
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
The hard disk is seen in the BIOS.
The partitions on it are accessible via the Places Menu on the Lucid Live CD.
It's just when I try to install, nothing is detected in Step 4 of 8, "Prepare Partitions".
An old 80GB IDE disk, on the other hand is seen by the partitioner.
I am not using RAID and it is not enabled in the BIOS.
Should the first bootable partition start from sector 1 on a hard disk? or Can it be created anywhere on the disk? I am using fdisk to create the bootable partition.
View 2 Replies View Relatedwell yesterday I upgraded my karmic to lynx. So far so good, overall much improved plus I love the new theme. Now the problem, I share my Firefox/Thunderbird profile (stored in my secondary HD) with WinXP (dual boot box). Since karmic, before I opened Firefox/Thunderbird, I had to mount the 2ndary HD which of course prompted me for a password and then everything worked fine. In case I forgot to mount the disk then Firefox popped the following msg: Firefox is either opened or in use.Now, lucid strangely mounts my HD without a password, more peculiarly I have r-w-e permissions and on top of that Firefox/Thunderbird gives me the silly msg!
Tried to unmount/mount back but still no password. I end up believing that this Firefox hesitation to start (based on karmic experience) is related with the password thing...or not?
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
mount from the old hdd to the new hdd i mean (Hard disk)
View 2 Replies View RelatedCopy of IBM Server hard disk data to Another USB External Hard disk?
View 2 Replies View RelatedI recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
ran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.
View 1 Replies View Relatedis there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
View 2 Replies View RelatedI created a thread about a problem a I had with my hard disk clicking whilst idle little while ago and I may now have stumbled upon a possible solution. The strange thing with the problem is that Ubuntu/Kubuntu didn't cause this problem but Opensuse 11.2 does.
I installed Fedora 13 to have a glimpse of what all the fuss was about and noticed that I had the same problem (hard disk clicking whilst idle ~ every 20 secs or so). Now there's a wiki on this subject and a few bug reports: [url]
Problem Description
Some ATA harddrives perform very frequent head unloads under Linux significantly shortening their lifespans. Root cause
The inactivity timer for head unload is configured too aggressively either via ATA APM (Advanced Power Management) feature or other non-standard means. Such aggressive settings are very fragile to changes in IO pattern and under Linux many such drives unload their heads only to re-load them shortly. Note that this relentless unloading/reloading cycle can also be triggered under Windows by installing programs which can alter the IO pattern (e.g. certain vaccine programs which runs in background).
Now two of the listed models with this problem are basically identical to my model (Dell Inspiron 1520) and basically share the same hardware: Dell Vostro 1500 and XPS 1520.
The workaround listed is to:
set APM to 254
Furthermore, there is a script: Storage-Fixup which can also be downloaded from opensuse software search. Indeed there is a report of this for a Vostro 1500: Gmane Loom
The report suggests looking at: Disk Power Management - openSUSE which lists a method to create a configuration file to management disk power management:
My question is whether I could download the storage-fixup rpm [url] has a description of it and it can be found: Software.openSUSE.org) and install it to (hopefully) solve the issue or should I follow the method given in: Disk Power Management - openSUSE
to set APM to 254:
Code:
Can this be done and to restore the disk with a similar cat command.
View 3 Replies View RelatedI'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
My Toshiba 500Gb USB hard drive is not being detected anymore when i insert it in 9.10. It only started doing this from last week, it was fine before (and it works fine in Windows XP). The connections are fine and all, because when i type "lsusb", i see it as follows:
Bus 001 Device 003: ID 19d2:0063 ONDA Communication S.p.A.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0930:0b09 Toshiba Corp.
[code]...
I am trying to mount a 2nd NTFS storage disk in my new installation on Ubuntu 10.10, I can see it in the disk manager, but cannot access the files, I tried following the steps on this on another thread and i got the following error:
View 8 Replies View RelatedI have 1tb Seagate Freeagent NTFS External HD. I have Windows Vista Ultimate SP1 with dual boot as Ubuntu. I'm primarily a windows user, since i'm not that well acquainted with linux. External Hard Drive does not detect- when i connect it..it just gives a whirring sound and the "My Computer" window hangs. Figured out the cause- and temporary solution- The drive should do principle mount automatically. It won't if the file system is not "clean". That is possible if the drive was connected while you hibernated Windows, or if you did not properly disconnect the drive.
I booted with ubuntu and did the following-
sudo fdisk -l
and got the following:
Disk /dev/sdb: 1000.2 GB, 1000204884992 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x396e2b4d
Device Boot Start End Blocks Id System
/dev/sdb1 1 121601 976760001 7 HPFS/NTFS
Then I typed:
sudo mkdir /media/FreeAgent
sudo chmod 777 /media/FreeAgent
And wrapped it up with editing fstab with the following code:
#FreeAgent USB Drive
/dev/sdf1 /media/FreeAgent ntfs defaults 0 0
Now the browser window for the freeagent hard drive pops up and I can access everything. I try to shutdown the computer but it won't as long as the hard disk is connected. So I have to pull the usb out. And the problem remains the same. I want the hard disk to be detected normally on my windows/linux (like normal usbs work-plug it in and it works). Also have no clue how to work a temporary solution like this with windows yet. I have boot with ubuntu everytime and repeat these steps when I want to access it.
am using the community build of Ubuntu 9.10, I have an old as dirt Power Macintosh G3 Blue And White, and I can't get it to install. I tried the live CD first of course, and now the alternate. Both tell me that no disk drives detected, even though Mac OS 9, X, and Fedora all detect both my 40gb seagate, my 120gb seagate, and my 120gb maxtor.I am trying to get this running with some sort of linux for a school project.What is happening is it asks me what driver to use, and if I select the bottom option that it is none of the above, it asks me to load a driver from a USB flash drive, which I don't know what driver to use. They are all standard IDE devices hooked into the built in bus. I obviously can't move past this point.
Specs:PowerPC G3 450mhz1gb of RAM120gb hard driveDVD-ROM driveZIP 250 drive (currently not hooked up)PCI ATI Rage 128 16mb video card (stock)Apple Fast ethernet 10/100 PCI card (machine has built in ethernet, but I am turning this machine into a hardware firewall, so a second NIC is required).Oh, I have used this machine perfectly with ubuntu before. When I first got it, I started out running Ubuntu 5.10 way back in 2005. I was thinking of downloading and burning 6.06, and upgrading from there.
Everytime i reboot, it appears on the screen " The disk drive for /usr/local is not ready yet or not present" . I need to click S for skip mounting to skip that part everytime
View 9 Replies View Related