I am trying a network install of debian 6.0 by dumping the contents of a DVD onto my local http server. For some reason the Western Digital 80 GB pata HDD doesn't get detected when I click on 'detect disk', I even tried with a SATA, no luck.
View 7 RepliesI Installed Ubuntu 9.04 with XP theme. Then I installed Picasa and I have pictures on a 2nd hard disk. When I restart the PC Picasa doesn't see the 2nd drive. The 2nd HDD is mounted under /media/disk and clicking on the "My computer" icon (this is XP theme), I see the 2nd hdd. Now, I have to add this disk to Picasa again for it to scan the pictures. I don't want to do this on a regular basis.
View 1 Replies View RelatedAll of my computers are second-hand (except 1 laptop but it doesn't count) and I see in my Dell 4600 there are 2 SATA connectors on the motherboard. I picked up a 250 GB SATA hard disk and cables recently and tried plugging it in but the system doesn't see it. I even disconnected all other disks to make sure there wasn't a conflict (master/slave) issue going on but the system still does not see it.
The disk is vibrating so I assume it is getting juice and is spinning. Is there a setting or something I have to do to tell the system to access the SATA? Do I have to look at RAID settings if there is only 1 SATA disk? Can I not have a SATA disk and an ATA disk plugged in at the same time? I want to try and determine if the disk is bad, or is it PEBKAC!
Hardware: Toshiba Satellite L755Software: openSuse 11.4 with kernel 3.1.0-rc1-98-g72fa599-1-vanillaPeripherals: Logilink USB 3.0 to SATA HDD Adapter with Western Digital WD2500JSI installed the Vanilla kernel in the hope that USB 3.0 will work. But though some things really have been fixed (for instance, the notebook can resume from sleep mode), USB 3.0 still doesn't work.
Code:
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
I tried to install ubuntu 10.10 today through livecd. but the partitions in my 60gb samsung harddisk are not detected. My entire harddisk is shown as unallocated free space. Also gparted is not detecting the partitions as well. I am currently not facing any problems with my partitions in windows xp. I tried the solution given here (to no avail): [URL]. I have had no such problems with previous versions of ubuntu.
View 9 Replies View Relatedi'm using athlon 64 bit , asus a8vmx mbd, 1gb ram
View 3 Replies View RelatedI installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
The hard disk is seen in the BIOS.
The partitions on it are accessible via the Places Menu on the Lucid Live CD.
It's just when I try to install, nothing is detected in Step 4 of 8, "Prepare Partitions".
An old 80GB IDE disk, on the other hand is seen by the partitioner.
I am not using RAID and it is not enabled in the BIOS.
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
View 3 Replies View RelatedThis is my problem, I want to install debian 5.5 Lenny stable (2.6.26-2-amd64) on our new Dell PowerEdge T610 with a PERC controller H200
but nothing to do, the default Debian installer does not detect it. After more research, the module that I must load is "mpt2sas" and after normaly my hard-drive will be detected I'm going on the Dell site, there are only drivers for RedHat and Suze distribution .. I still try to install rpm packages but without success!
no disk detected when installing debian 5 on a msi P55-GD80 mother board 8 gigs Kinsgton Ram and 2 x seagate barracuda 500 gigs 9BD648-552, I get a list of drivers to choose from but dont know wich to choos
View 3 Replies View RelatedI want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000
View 2 Replies View RelatedI have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI'm having problem in installing debian 7.5.0 on Dell Power Edge R 470 1U Rack Server ( Not Sure If am using RAID 1 ) whereby the hard drive is not detected. This server is running 2 Proc/2x1.2 SAS HDD . The installation went ok until i reached into partition section whereby the drives is not there to be selected , throwing an error " No disk drive detected , Driver needed fro your disk drive "
I've tried to use debian-7.8.0-amd64-DVD-1.iso
My server details:
Dell Power Edge R 470
32GB RAM
2 x 1.2 TB SAS HDD
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:
[code]...
Debian and debian based distros issue has a issue that has come to make it self aware to me when I was trying to burn a video on my hard drive with braseo and it won't let me burn more than 4.4 gigs to a dvd with 4.7 gigs of free space even a file that is over the 4.4 gig limit by a megabyte with windows i didn't have this problem. One more thing I have 16 gig flash drive and on debian and debian based distros i can only use 13.1 gigs of it but on fedora I can use all 16 gigs.
View 3 Replies View RelatedIf you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?
By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...
(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)
I installed an OS on the second hard-disk/partition3 (/dev/sdb3; OS was FreeBSD). Added the entry and when i boot: nothing. I choose the OS from grub's menu, the list of choices vanishes, the background image stays, and there it hangs. It hangs until i hit: ctrl+alt+backspace. I have thought: to hell with it, and installed Debian/Lenny. Same problem (OH!).
I also installed the boot-loader to the second disk (/dev/sdb), hit F11 after the BIOS-screen and chosen the second hard-disk to boot from: a similar problem. It hangs, and the keyboard is "dead". I am clueless what to check for (i checked the general culprits, but with UUID its all a bit of a mess. I would say it looks good, but wouldn't bet on it) Anyone ever heard of something like that? Without error message its not easy to use the amazing Google. I do a bit of grub-troubleshooting, usually it works, but usually i get error-messages.
I made two threads about it, in case they contain useful info, here they are:
http://www.linuxquestions.org/questions ... sd-827059/
http://forums.freebsd.org/showthread.php?t=17021
I have an external hard disk for USB port. I formatted it on MS for NTFS system.working fine on MS. But can not write while on Debian. Permission denied. Want to use for both on Debian & MS.
View 1 Replies View RelatedI have a Samsung R430 Notebook with debian 6 installed, Nvidia drivers installed... and i'm having troubles with my system... often freezes when i unmount my Hitachi 500GB USB external hard drive.. i got no response from my machine, even with Ctrl+Alt+F1 to enter console mode and reboot from there, just have to shutdown or disconnect my notebook in the bad way.i dont think that is hardware, cause i have installed Windows 7 as well with dual-boot and no problems so far...
cant attach mi mesagge log at this point because the forum doesnt allow me to do that, but if you want to help me i can send that to your e-mail or something.
how to install from hard disk?
View 2 Replies View RelatedI have a system with Windows installed. Now I got a second hard disk on which I want to install Debian. After installation I have a dual boot system or I have to manually configure GRUB? Thnak you and I'm sorry fo my inexperience.
View 1 Replies View RelatedI am running Debian testing (amd64, xfce) on my box where I have two sata hard disks.
I do not have any raid or fancy stuff; all the OS is on one hard disk and the second is mounted on boot and accessible as simple extra storage that I use for some backups.
Today, for the first time, I started to get some messages during the boot about some process (EMASK and DRDY) on my second hard disk.
The system boots, but I cannot access any more the 3 TB volume which is my second hard hard disk.
I do not know if it is a software of hardware problem (the hard disk are not old at all), so...where should I start from?
I have old hard disk with broken DMA. When linux boots, it tries to enable DMA, fails, tries again... It tries to enable DMA several times, then disables DMA and boots. But it tries to enable DMA for nearly 3-4 minutes. How can I say linux to not try to enable DMA for this hard disk? System is installed on another hard disk that works great. Old hard disk is used only for not frequently used data.
View 5 Replies View RelatedJust loaded Squeeze (KDE) onto a partition on my desktop and am a bit alarmed by the disk thrashing thats going on? Damn light on constantly. if I didn't know better I'd think I was using Vista. Is this something to do with 'nepomukservices' that seems to be taking a fair amount of cpu time? Not used to KDE 4 so maybe this is normal.
View 6 Replies View RelatedI've bought a new notebook. The hard drive won't stop spinning down and then spinning up again during load. I don't want HD power saving, so I disabled it within
1. /etc/hdparm.conf
Code: Select all# -B apm setting
apm = 255
# -B apm setting when on battery
apm_battery = 255
It didn't work. I can still hear the HD spin up. It's annoying in a video game because things just suddenly stop for a second.
2. /etc/udev/rules.d/50-hdparm.rules
Code: Select allACTION=="add", SUBSYSTEM=="block", KERNEL=="sda", RUN+="/usr/bin/hdparm -B 255 -S 0 /dev/sda"
This was also every tip I could find during RTFM.
Other specs:
Acer Aspire E5-521G-88A8 Notebook
AMD A8-6410 APU
4 GB RAM
AMD Radeon R5 2 GB VRAM
hdparm model number: ST1000LM024 HN-M101MBB
Debian Jessie
I am running a Debian/Linux "Lenny" dual boot system and when I try to open my WD passport storage device I get: Cannot mount volume. Invalid mount option when attempting to mount the volume "My Passport".
This is the contents of my fstab file:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/sda8 / ext3 errors=remount-ro 0 1
[Code].....
My system currently runs mdadm with three mirrored volumes (4 disks, two mirrored partitions on the first two (a) and (b), entire disks mirrored on the second two (c) and (d)), giving me some redundancy in case of disk failure, which it appears I now have. The root volume is mirrored on sda1 and sdb1, and this morning I noticed a mail from mdadm telling me the two RAIDs on (a) and (b) were degraded. It appears things went a step further and /dev/sda is completely gone.
mdadm has come through, though. The system is still running normally with the mirrored partitions on disk (b). What's got me concerned is that disk (a) is only about a month old and was bought brand new. I'm not at home right now to check the actual hardware, but seeing as the signs are pointing this way, do they necessarily mean the disk has failed? Is there something in the logs I could check that would tell me if, say, the PCI SATA card is playing up instead? I know hard disks fail, but I'm paranoid in case tings get worse as I'm running a reasonably important website on this machine, and just wondering if I should be considering setting up a backup server in case there's a bigger problem here. Edit: Sorry, forgot to say. I'm running Squeeze and it's fully up to date. Hardware is a 1.2GHz Celeron, 512MB RAM, Silicon Image SiI 3114 PCI SATA Controller, 2x 500GB SATA disks (a and b), 2x 1TB SATA disks (c and d).
I am using LVM2 and have shrinked my /home partition and extended my / partition but I'm not sure if I used all the free space when growing my / partition. How can I find out? I prefer using the terminal if there is a graphical way to do this but I would like to know both ways if there are two ways.
View 3 Replies View Related